SPECIAL REPAIRS TO OFFRS MD ACCN BLDG NO. P 72 2 AND P 72 4 AND AND CERTAIN MINOR WORKS AT MIL STN GANDHINAGAR

Amount

Removing rubbish to a distance exc. 1.5 Km but not exc. 5.0 KM out side MD land complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Cutting chases, pinning in, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed.

M&L for cutting uneven surfaces of concrete & cutting reinforcement from drops of fins & facias (thickness not exceeding 50mm) using necessary scaffolding and making good the disturbed portion with 10mm thick rendering in CM 1:3 finished even and smooth without using extra cement etc. complete all as specifeid and directed.

S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F factory made 30mm thick flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 Sqm but not exc. 4 Sqm each complete all as specified and directed.

Taking down shutter exc 1 sqm n.exc 2 sqm each complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F, in repair, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F, stainless steel butt hinges of size 100mm complete all as specified and directed.

Taking down steel window/ventilator of any description complete all as specified and directed

S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F, in repairs, butt hinges, medium weight, cold rolled, mild steel of size 100mm including necessary welding where required complete all as specifed and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, in repair, extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, single action spring hinges, mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed.

S&F, in repair, single action spring hinges, mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed.

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F, 0.63mm mild steel plain black sheet in hearths covering in door shutters covering to door chowkhat cut to size edges beaded if directed holes punched including round headed screws clout nails or reivets and fixed to steel members etc. with plain sheet 40mm lap joints or welded reverted seam including bending turning up, mitred angles, stopped ends, outlet etc complete all as specified and directed.

M&L for rolled mild steel angle iron work as in door frames complete, drilled for fixing of hinges etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

S&F mild steel work in tubular trusses, posts, main and cross beams, hip and jack rafters, purlins, including special shaped washer etc. complete using ERW or induction butt welded tubes, conforming to IS 1161-1979, Gde St-240 complete all as specified and directed.

S&F, Aluminium anodised doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

S&F, 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap, fixed with screw and washer in roof, wall etc. complete all as specified and directed.

S&F,in repairs, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for machine cut kota stone slab, 550x600mm, 20-25mm thick as in flooring over and including screed bed of 15mm thick in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 15 to 18mm thick black granite stone salb (table rubbed and polished) in cooking platform steps, jambs, pillars, window cills and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture and pigment to match with the shade of granite.

Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed.

M&L for 50mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300mmx200mmx7mm/350 x 250 x 7mm/450 x 350 x 7mm thick on vertical surfaces such as skirting/dado, set and jointed in neat cement slurry and pointed in coloured cement to match over and including rendering 10mm thick in cement mortar (1:4)complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

M&L for non skid coloured ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.06 sq.m but not exceeding 0.11 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.

M&L light shade, vitrified tiles, 10mm thick, (square/ rectangular polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in CM 1:6 complete all as specified and directed.

S&F in repair, consealed stop cock regular body 15mm with flanges of 15mm bore complete all as specified and directed.

S&F, in repair, Angle cock, cast copper alloy fancy type chromium plated scrfewed down, high pressure with curtch or butterfly handle screwed both ends for iron pipes or for unions of 15 mm bore complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 5mm thick in cement mortar 1:4 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over and including chalk whiting on walls complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces and applying one coats of oil bound distemper on walls complete all as specified and directed.

M&L for preparing old plastered or un-plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

S&F, 5mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

M&L two coat of premium acrylic amulsion with silicon polythene additives paint including & over a coat of 2mm thick wall complete all as specified and directed.

Complete removal of old white wash/colour wash/cement base paint from old treated surface by washing/scraping or sand blasting etc. complete all as specified and directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over existing shop coat of primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.

Supply, hoisting, fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked, including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

Supplying, hoisting, fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

S&F, CP brass bib cock with capstan head and cup, full turn, screwed down suitable for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.

S&F in repairs, brass chromium plated wall mixer (hot and cold) with curtch with telephonic hand shower and 1.5m stainless steel tube suitable for 15mm bore fitting completed all as specified and directed.

S&F CP brass sink cock swan neck revolving type suitable for 15mm bore fitting complete all as specified and directed.

S&F, CP brasscentral hole basin mixer, swan neck revolving type suitable for 15mm bore fitting complete all as specified and directed.

S&F, in repair chromium plated soap dish holder complete all as specified and directed. Make : Jaquar/Cera or equivalent as approved by GE from make mentioned in Appx 'C'.

S&F, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 20mm bore of iron pipe and fixed all as specified and directed.

S&F, in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 25mm bore of iron pipe and fixed all as specified and directed.

S&F, in repair, 25mm dia, powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets complete all as specified and directed.

S&F, in repair, health faucet with wall hook and 1.5m PVC hose pipe complete all as specified and directed. As per cat No. CE 105 of make Cera or equivalent make as approved by GE from Appendix 'C'.

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed. Make-Jaquar (Cat No - ACN -1153N) or equivalent as approved by GE.

S&F, in repair, corner glass shelf with CP brackets and with decorative railing fixed to wall complete all as specified and directed. As per Cat No. CAN-1173 of Make : Jaquar, Cera or equivalent as approved by GE.

S&F, in repair, PVC Bath cabinet made from hard thermosetting material with mirror, white/ivory colour, 350 x 450 mm size, as per Cat No. 551 of make prayag or equivalent make as approved by GE from Appx 'C'.

S&F, moduls furniture of PVC shutters of SPUF 128, 20mm thick colour code D-01 and frame size 48 x 40mm (RUPS 4141) complete all as specified and directed. Make Sintex or equivalent make as approved by GE.

S&F, 20mm PVC sheet SPUF 128, colour code D-01 of sintex for purposed of wooden complete all as speficied and directed. Make Sintex or equivalent make as approved by GE.

S&F stainless steel kitchen basket with stainless steel wire perforate plate fabricated and stainless steel sliding guide Chanel heavy duty complete all as specified and directed.

S&F, CP brass towel rack with 03 Nos sliding hook as per Make Prayag cat part No. BA-12 complete all as specified and directed.

S&F, CP brass towel ring with 03 Nos sliding hook as per Make Prayag cat part No. BA-11 complete all as specified and directed.

Supply only, PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed.

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F, in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)

S&F, Grating, square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.

S&F, in repair, only PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, PVC (SWR) floor trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S&F, in repairs, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest, P or S trap (excluding flushing cistern and flush pipe) including plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken portion etc. complete all as specified and directed.

S&F, in repair, vitreous china wash down water closet pan (pedestal pattern), with seat cover (including fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.

S&F, in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.

S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.

S&F, in repair, kitchen sink made of stainless steel 1mm thick including supply and fix 32mm bore CP waste coupling, plug, washer, 32mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x3mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC (1:2:4), type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F, in repair kitchen sink with drainage board made of stainless steel 1mm thick including supply and fix 32mm CP waste coupling, plug, washer, 32 mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x4mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F, 32mm dia High density poythelyne (HDPE) pipes of pressure rating 6kgf/sqm as in waste pipe for urinal, sink, etc

S&F, 40mm dia High density poythelyne (HDPE) pipes of pressure rating 6kgf/sqm as in waste pipe for urinal, sink, etc

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar for 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.

Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawing through in and including medium grade, rigid non metallic PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories and including with multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire terminating with new modular sunken concealed terminal boxes complete all as specified and directed for the following :-

(a) One light/fan point controlled by one switch

(b) One multi pin 5 Amps, socket outlet on Independent board.

(c) One multi pin 5 Amps, socket on the same board.

(d) One bell buzzer point controlled by one push buttons independent.

M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawing through in and including medium grade, rigid non metallic PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories and including with multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire terminating with new modular sunken concealed terminal boxes complete all as specified and directed for the following :-

M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for one 3 pin, 15 Amps socket outlet point on independent board complete all as specified and directed.

Supply and installation of split type AC with remote control, 1.5 ton capacity fitted with outdoor unit hermetically sealed rotary/reciprocating compressor operating on Refrigerant R-22/non CFC, electric driven , single phase 230 volts, AC, 50 Hz,Conforming to IS-1391(Part-II) with latest amendments, latested higher Star rated as available, capable of performing cooling, dehumidifying, air circulating and filtering including Copper tubing of both size, insulation sleeves and PVC insulated and sheathed multistranded copper conductor cable 2.5 Sqmm 3 core of suitable length etc of make approved by GE from the make specified in Appx 'C', complete alll as specified and directed.

S&F in repair sheet metal enclosures single pole & natural with a two pin & earth plug and socket complete with one single pole MCB of 20 amps ,10 KA ,240 volts complete all as specified and directed

S&F, desert cooler, steel body, electric driven (single phase) having normal air flow capacity of 4000 Cum per hour complete all as specified and dircted as per make as specified in Appx 'C'.

S&F, Deep freezer, 400 liter capacity, star rated, single door type hard top suitable for operation on 230V AC, SP, 50 Hz supply , complete with 3 core round copper flexible cable duly fitted with 3 pin plug top of 5/15 Amps and testing complete of make as approved by GE from the make specified in Appx 'C', complete alll as specified and directed.

S&F, Refrigerator, 360 Ltr, latest higher star rated as available, double door, frost free, suitable for operation on 230 Volt AC supply, with model features complete with all standard accessories i.e. vegetable crisper, fruit crisper, freezer lamp, internal micom, catch in deo clonizer, humidity control, with 3 core copper flexible wire 650/1100V grade round cable duly fitted with a 3 pin plug top 5 Amps and testing complete of make approved by GE from the make specified in Appx 'C', complete all as specified and directed.

S&F, lamp holder, PVC/Polycarbonate, with back plate suitable for batten fittings complete all as specified and directed

S&F, switch piano, flush button, single pole, one way, 5 Amps complete all as specified and directed

S&F, switch piano, flush button, single pole, one way 15 Amps complete all as specified and directed

S&F, bell, A.C. 230 Volts, single pole, Ding doll, complete all as specified and directed.

S&F, socket outlet, 2 in 1, 3 pin, 15 Amps and 5 Amps flush type complete all as specified and directed

S&F, socket outlet, 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and directed

S&F, bell push, flush type 5 Amps complete all as specified and directed.

S&F, in repairs, miniature circuit breakers, type curve ‘B’ , 10 KA, SP, 6 to 32 Amps including connecting and testing complete all as specified and directed. Make : Havells/Legrand/Schneider.

S&F, in repair, MCB's SPN 40 Amps 240 Amps 240 volts with 'B' curve, fixed in sheet metal board including connecting and testing complete all as specified and directed. Make : Havells/Legrand/Schneider.

S&F, in repairs, sheet metal distribution board, SPN, 8 way 240 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed

S&F, ceiling rose, 3 terminal , any shade, of PVC/Polycarbonate, isolated body complete all as specified and directed

S&F, in repair, MCCB, triple pole and neutral, 25 KA, 63 Amps, 415 Volts including connecting complete all as specified and directed. Makes of Havells/Legrand/Schneider.

S&F ceiling fan regulators, Electronic type, AC, 230 Volts complete all as specified and directed. Make : Anchor/Vinay/Havells

S & F, in repair, Distribution Board Power line VTPN, 4 way, 415 volts, factory made powder coated, double door with neutral and earth link, including 3 pole MCCB 63 Amps rating, 10KA breaking capacity for incoming supply and including 12 Nos single pole MCBs 6 Amp to 32 Amp 'C' series for outgoing supply complete all as specified and directed. As per Cat No DSDLVDRBAOFO04 of Standard or equivalent make approved by GE from the make specified in Appx 'C'.

S&F, in repair, LED light fitting, batten type, housed in extruded from powder coated aluminium, 20 watt connecting with flexible three core copper conductor cable of suitable size and testing complete all as specified and directed as per Make of Wipro/Havells/Bajaj.

S&F, in repair, LED light fitting, batten type, 10 watt connecting with flexible three core copper conductor cable of suitable size and testing complete all as specified and directed as per Make of Wipro/Havells/Bajaj.

S&F, in repair, LED bulk head, 10 watt connecting with flexible three core copper conductor cable of suitable size and testing complete all as specified and directed as per Make of Havells/Bajaj/Crompton.

S&F, in repairs, sub-main wiring with 2 single core, 6 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC casing and caping of 32mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 4 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: 2 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length.

Taking down existing ceiling fan and keeping in safe custody and re-installation the same after completion of work complete all as specified and directed.

Taking down existing electric meter and keeping in safe custody and re-installation the same after completion of work complete all as per specified and directed.

Taking down existing Geyser and keeping in safe custudy and re-installation the same after completion of work complete all as specified and directed.

Taking down existing exhaust fan and keeping in safe custody and re-installation the same after completion of work complete all as specified and directed.

M&L, in repairs, earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions;-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m.

ALBA AC AND REF SERVICES

divyarsh entrprise

Haritwal traders