Strengthening of 4 roads in Thiruverumbur Block of Tiruchirappalli District under Tamil Nadu Rural Roads Improvement Scheme 2020-21 Package No.28

Amount

STRENGTHENING THE ROAD FROM KEELAMULLAIKUDI MAIN ROAD KM 0/0-1/0 (R-295) Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical Specification.. km 0/0-1/0

Earth work excavation and depositing on bank within initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS .20.A Km 0/0/1/085

Providing and laying Water Bound Macadam Grading - II( 75mm to 11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively)and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I (Mix - in - place method) km0/0-1/0

Providing and laying Water Bound Macadam Grading - III( 63mm to 11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively)and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I (Mix - in - place method) km0/0-1/0

Providing and laying Tack Coat over the W.M.M surface using 2.50Kg of Emulsion Bitumen as Blinder for 10Sqm. area including cost and conveyance of bitumen which will be supplied departmentaly at departmental section store at union office and cost of the same which will be recovered from the contractors bill at the rates specified in the special condition appended here with including conveyance of bitumen from section store to work site handling charges of bitumen at both ends and including all labour charges for clearing surface before the application of bitumen blinder and heating the bitumen to the required temperature including labour charges for applying tack coat uniformly including hire charges bitumen sprayer (with self heating and pumping arrengment) and all other tools and plants employed and also as directly by the engineer incharge and all other incidental charges etc. complete as per clause 505 of most specification. 0/0-1/0

Providing and laying open graded Premix Carpet with seal coat 20mm consolidated thickness using 0.18 Cum of 13.2 mm IRC size machine crushed HBG metal an 0.09 Cum of 11.2 mm IRC size machine crushed HBG metal with 14.6kgs of bitumen for premixing per 10sqm. Metre of premix carpet and 0.09 Cum of 6.75mm IRC HBG size machine crushed HBG metal with 9.80kg. of bitumen per 10 spm. of seal coat including cost and conveyance of all materials from approved sources to worksite and stacking them to standard departmental gauge for pre-measurement including bitumen which will be supplied by the department at the departmental section store at Panchayat Union office including conveyance of bitumen from section stores to worksite and the cost of the same will be recovered from the contractors bill at the rates specified in the special condition appended herewith including heaking and mixing the materials using mini hot mix plant for premix carpet including all labour charges for spreading the same finishing to specifications, grades and cross section and consolidation by power roller including heating and sparying the biutmen for seal coat over finished permix carpet surfaces and spreading the 6.75 mm IRC chips uniformly over the suface and rolling with power roller rolling including hire and fuel charges for mini hot mix plant. Power roller and all other tools and plants employed, including all other incidental charges etc., complete --- km 0/0-1/0

Providing and Laying gravel soling to compacted thick including cost and conveyance of gravel from approved sources to works site including labour for spreading, watering and compacting by power roller to achieve the required proctor density at 100 % compaction at optimum moisture content and hire & fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricadng and providing danger lights etc. complete. KM 0/0-1/0

Provision for HM stone

Provision for Restoration of CC Road Supplying and erecting centering for sides centering for soffits of RCC slabs of plane surface like lintels, beams, etc., including sturtting 3m hihg using mild steel sheets of size 90cm x 60cm x

CC 1:2:4 MIX using 20mm HBG Metal including cost & conveyance of all materials to site all labour charges with simultaneous pointing etc. complete

Provision for RCC 1.50m Span Culvert Earth work excavation in all classes of soils except hard rock requiring blasting soils such as hard stiff clay ordinary gravel etc., with initial led and lift as per SS 20B including shoring baling out water where necessary etc.. Complete for foundation

Supplying and filling in foundation and basement with filling sand in layers not more than 15cm thick well rammed watered and compacted complying with std., speciication charges etc.,

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and all labours charges etc., complete.

Supplying and erecting centering for sides centering for sofits of RCC slabs of plane surface like lintels

Supplying and erecting centering for sides centering for sofits of RCC slabs of plane surface like lintels

CC 1:3:6 MIX using 40mm HBG Metal including cost & conveyance of all materials to site all labour charges with simultaneous pointing etc. complete

CC 1:2:4 MIX using 20mm HBG Metal including cost & conveyance of all materials to site all labour charges with simultaneous pointing etc. complete

Reinforce cement concrete 1:1 1/2:3 using 20mm gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of reinforcement and fabricating charges but including curing including all labour charges etc., complete for DECK SLAB

Supplying fabricating and placing in position mild steel or ribbed tor steel for reinforced cement concrete woks standard speciication (MS rodsd or RTS bars will b supplied departmentally at section stores and cost will be recovered at issue rate). The Contractor shall supply the binding wire.

Name board charges

STRENGTHENING THE ROAD FROM KAMATCHI AMMAN NAGAR ROAD KM 0/0-1/0 Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical Specification.. km 0/0-1/085

Earth work excavation and depositing on bank within initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS .20.A Km 0/0/1/085

Providing and laying Water Bound Macadam Grading - II( 75mm to 11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively)and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I (Mix - in - place method) km0/0-10/4

Providing and laying Water Bound Macadam Grading - III( 63mm to 11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively)and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I (Mix - in - place method) km0/0-1/0

Providing and laying Tack Coat over the W.M.M surface using 2.50Kg of Emulsion Bitumen as Blinder for 10Sqm. area including cost and conveyance of bitumen which will be supplied departmentaly at departmental section store at union office and cost of the same which will be recovered from the contractors bill at the rates specified in the special condition appended here with including conveyance of bitumen from section store to work site handling charges of bitumen at both ends and including all labour charges for clearing surface before the application of bitumen blinder and heating the bitumen to the required temperature including labour charges for applying tack coat uniformly including hire charges bitumen sprayer (with self heating and pumping arrengment) and all other tools and plants employed and also as directly by the engineer incharge and all other incidental charges etc. complete as per clause 505 of most specification. 0/0-1/085

Providing and laying open graded Premix Carpet with seal coat 20mm consolidated thickness using 0.18 Cum of 13.2 mm IRC size machine crushed HBG metal an 0.09 Cum of 11.2 mm IRC size machine crushed HBG metal with 14.6kgs of bitumen for premixing per 10sqm. Metre of premix carpet and 0.09 Cum of 6.75mm IRC HBG size machine crushed HBG metal with 9.80kg. of bitumen per 10 spm. of seal coat including cost and conveyance of all materials from approved sources to worksite and stacking them to standard departmental gauge for pre-measurement including bitumen which will be supplied by the department at the departmental section store at Panchayat Union office including conveyance of bitumen from section stores to worksite and the cost of the same will be recovered from the contractors bill at the rates specified in the special condition appended herewith including heaking and mixing the materials using mini hot mix plant for premix carpet including all labour charges for spreading the same finishing to specifications, grades and cross section and consolidation by power roller including heating and sparying the biutmen for seal coat over finished permix carpet surfaces and spreading the 6.75 mm IRC chips uniformly over the suface and rolling with power roller rolling including hire and fuel charges for mini hot mix plant. Power roller and all other tools and plants employed, including all other incidental charges etc., complete --- km 0/0-1/0

Providing and Laying gravel soling to compacted thick including cost and conveyance of gravel from approved sources to works site including labour for spreading, watering and compacting by power roller to achieve the required proctor density at 100 % compaction at optimum moisture content and hire & fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricadng and providing danger lights etc. complete. KM 0/0-1/0

Provision for KM stone

Provision for HM stone

Name board charges

STRENGTHENING THE ROAD FROM SOLAMADEVI MAIN ROAD KM 0/0-1/0 (R232) Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical Specification.. km 0/0-1/0

Earth work excavation and depositing on bank within initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS .20.A Km 0/0/1/0

Picking the existing BT surface including all labour charges etc complete km 0/0-1/0

Providing and laying Water Bound Macadam Grading - III( 63mm to 11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively)and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I (Mix - in - place method) km0/0-1/0

Providing and laying Tack Coat over the W.M.M surface using 2.50Kg of Emulsion Bitumen as Blinder for 10Sqm. area including cost and conveyance of bitumen which will be supplied departmentaly at departmental section store at union office and cost of the same which will be recovered from the contractors bill at the rates specified in the special condition appended here with including conveyance of bitumen from section store to work site handling charges of bitumen at both ends and including all labour charges for clearing surface before the application of bitumen blinder and heating the bitumen to the required temperature including labour charges for applying tack coat uniformly including hire charges bitumen sprayer (with self heating and pumping arrengment) and all other tools and plants employed and also as directly by the engineer incharge and all other incidental charges etc. complete as per clause 505 of most specification. 0/0-1/0

Providing and laying open graded Premix Carpet with seal coat 20mm consolidated thickness using 0.18 Cum of 13.2 mm IRC size machine crushed HBG metal an 0.09 Cum of 11.2 mm IRC size machine crushed HBG metal with 14.6kgs of bitumen for premixing per 10sqm. Metre of premix carpet and 0.09 Cum of 6.75mm IRC HBG size machine crushed HBG metal with 9.80kg. of bitumen per 10 spm. of seal coat including cost and conveyance of all materials from approved sources to worksite and stacking them to standard departmental gauge for pre-measurement including bitumen which will be supplied by the department at the departmental section store at Panchayat Union office including conveyance of bitumen from section stores to worksite and the cost of the same will be recovered from the contractors bill at the rates specified in the special condition appended herewith including heaking and mixing the materials using mini hot mix plant for premix carpet including all labour charges for spreading the same finishing to specifications, grades and cross section and consolidation by power roller including heating and sparying the biutmen for seal coat over finished permix carpet surfaces and spreading the 6.75 mm IRC chips uniformly over the suface and rolling with power roller rolling including hire and fuel charges for mini hot mix plant. Power roller and all other tools and plants employed, including all other incidental charges etc., complete --- km 0/0-1/0

Providing and Laying gravel soling to compacted thick including cost and conveyance of gravel from approved sources to works site including labour for spreading, watering and compacting by power roller to achieve the required proctor density at 100 % compaction at optimum moisture content and hire & fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricadng and providing danger lights etc. complete. KM 0/0-1/0

Provision for KM stone

Provision for HM stone

Providing for Culvert Earth work excavation in all classes of soils except hard rock requiring blasting soils such as hard stiff clay ordinary gravel etc., with initial led and lift as per SS 20B including shoring baling out water where necessary etc.. Complete for foundation

Supplying and filling in foundation and basement with filling sand in layers not more than 15cm thick well rammed watered and compacted complying with std., speciication charges etc.,

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and all labours charges etc., complete.

Supplying and erecting centering for sides centering for sofits of RCC slabs of plane surface like lintels

Supplying and erecting centering for sides centering for sofits of RCC slabs of plane surface like lintels

CC 1:3:6 MIX using 40mm HBG Metal including cost & conveyance of all materials to site all labour charges with simultaneous pointing etc. complete

CC 1:2:4 MIX using 20mm HBG Metal including cost & conveyance of all materials to site all labour charges with simultaneous pointing etc. complete

Reinforce cement concrete 1:1 1/2:3 using 20mm gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of reinforcement and fabricating charges but including curing including all labour charges etc., complete for DECK SLAB

Supplying fabricating and placing in position mild steel or ribbed tor steel for reinforced cement concrete woks standard speciication (MS rodsd or RTS bars will b supplied departmentally at section stores and cost will be recovered at issue rate). The Contractor shall supply the binding wire.

Name board charges

STRENGTHENING THE ROAD FROM GUNDUR BURIAL GROUND KM 0/0-1/1 Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical Specification.. km 0/0-1/17

Earth work excavation and depositing on bank within initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS .20.A Km 0/0/1/17

Providing and laying Water Bound Macadam Grading - II( 75mm to 11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively)and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I (Mix - in - place method) km0/0-1/0

Providing and laying Water Bound Macadam Grading - III( 63mm to 11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively)and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I (Mix - in - place method) km0/0-1/0

Providing and laying Tack Coat over the W.M.M surface using 2.50Kg of Emulsion Bitumen as Blinder for 10Sqm. area including cost and conveyance of bitumen which will be supplied departmentaly at departmental section store at union office and cost of the same which will be recovered from the contractors bill at the rates specified in the special condition appended here with including conveyance of bitumen from section store to work site handling charges of bitumen at both ends and including all labour charges for clearing surface before the application of bitumen blinder and heating the bitumen to the required temperature including labour charges for applying tack coat uniformly including hire charges bitumen sprayer (with self heating and pumping arrengment) and all other tools and plants employed and also as directly by the engineer incharge and all other incidental charges etc. complete as per clause 505 of most specification. 1/0-1/17

Providing and laying open graded Premix Carpet with seal coat 20mm consolidated thickness using 0.18 Cum of 13.2 mm IRC size machine crushed HBG metal an 0.09 Cum of 11.2 mm IRC size machine crushed HBG metal with 14.6kgs of bitumen for premixing per 10sqm. Metre of premix carpet and 0.09 Cum of 6.75mm IRC HBG size machine crushed HBG metal with 9.80kg. of bitumen per 10 spm. of seal coat including cost and conveyance of all materials from approved sources to worksite and stacking them to standard departmental gauge for pre-measurement including bitumen which will be supplied by the department at the departmental section store at Panchayat Union office including conveyance of bitumen from section stores to worksite and the cost of the same will be recovered from the contractors bill at the rates specified in the special condition appended herewith including heaking and mixing the materials using mini hot mix plant for premix carpet including all labour charges for spreading the same finishing to specifications, grades and cross section and consolidation by power roller including heating and sparying the biutmen for seal coat over finished permix carpet surfaces and spreading the 6.75 mm IRC chips uniformly over the suface and rolling with power roller rolling including hire and fuel charges for mini hot mix plant. Power roller and all other tools and plants employed, including all other incidental charges etc., complete --- km 0/0-1/0

Providing and Laying gravel soling to compacted thick including cost and conveyance of gravel from approved sources to works site including labour for spreading, watering and compacting by power roller to achieve the required proctor density at 100 % compaction at optimum moisture content and hire & fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricadng and providing danger lights etc. complete. KM 0/0-1/0

Provision for KM stone

Provision for HM stone

Name board charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

R RENGASAMY