PROVISION OF PORTICO AND COVERED SHED ,SPECIAL REPAIR TO BLDG NO TNC-49,TNC-60-,TNC-68 AND CERTAIN MINOR WORKS AT URI AND RAMPUR UNDER GE 969 EWS.

Amount

Surface excavation not.exc 30cm deep and averaging 15cm deep and getting out in hard /dense soil complete all specified and directed by engineer-in-charge.

Excavating in post holes( or similar holes) each not exc 0.5 cum , getting out, retunring, filling and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil complete all specified and directed by engineer-in-charge.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation,etc. or for shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out and getting out in hard/ dense soil complete all specified and directed by engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils or hard/dense soil complete all specified and directed by engineer-in-charge.

Removing excavated soils exceeding 250 M but not exceeding 500 M and depositing complete all specified and directed by engineer-in-charge.

M&L for sand Filling under floors , including, spreading, levelling, well ramming and watering in layers n.exc 25cm complete all specified and directed by engineer-in-charge.

M&L for demolition of cement concrete in ground floor and paving not.exc 15cm thickness (below or above ground level) and removal from site complete all specified and directed by engineer-in-charge.

M&L for PCC 1:4:8 type D2 (40mm graded stone aggregate) in floor and foundation, filling and mass concrete complete all specified and directed by engineer-in-charge.

M&L for PCC 1:2:4 type B1 40mm thick (20mm graded aggregate) as in floors etc complete all specified and directed by engineer-in-charge.

M&L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate ) as in copping, benching etc . complete all specified and directed by engineer-in-charge.

M&L for PCC 1:2:4 type B1 25mm thick (20mm graded aggregate) as in floors etc complete all specified and directed by engineer-in-charge.

M&L for cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) as in surface channels and drains complete all specified and directed by engineer-in-charge.

M&L for damp proof course to horizontal or vertical surface including necessary form work 40 mm thick in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate complete all specified and directed by engineer-in-charge.

M&L for 75mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in sub base of floors and pavings, complete all as specified and directed.

M&L75 mm thick Cement concrete type C 2, 1:3:6 (using 40 mm graded crushed stone aggregate) in plinth protection all as spd and directed

M&L Hard core of broken stone or boulder of gauge exceeding 63mm but not exc 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface

M&L Reinforced cement concrete (Nominal Mix) type B-0 1:2:4 (12.5mm Crushed stone aggregate) in beams, cantilevers,bressummers, lintels etc.complete all specified and directed by engineer-in-charge.

M & L Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all specified and directed by engineer-in-charge.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all specified and directed by engineer-in-charge.

M&L for Kota stone slabs, 20mm to 25mm thick, machine cut as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 15 mm thick in cement mortar (1:6) including rubbing, cutting and polishing (mirror type), complete all specified and directed by engineer-in-charge.

M&L for chequerd cement concrete tiles 30cmx30cm x22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments machine pressed in floors including screed bed 15mm thick in CM 1:4 complete all specified and directed by engineer-in-charge.

S&F coloured non skid ceremic tiles 300x300x7 thick , in flors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed in cement mortar (1:6) complete all as spd and directed.

S&F Glazed coloured ceremic tiles 450x 350x 7mm /450x350x7mm thick , in dado / skerting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendrering in cement mortar (1:4) complete all as spd and directed.

M & L for machine pressed pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all specified and directed by engineer-in-charge.

Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key screbbing down with water etc complete all specified and directed by engineer-in-charge.

M&L for Rendering 15 mm thick on stone walling surfaces finished even and smooth with using extra cement in cement morta 1:4 complete all specified and directed by engineer-in-charge.

M&L 15mm thick rendering on fair faces of brick work or conceret surface in CM 1 :6 finished even and smooth without using extra cement complete all specified and directed by engineer-in-charge.

Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc complete all specified and directed by engineer-in-charge.

Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work complete all specified and directed by engineer-in-charge.

Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work complete all specified and directed by engineer-in-charge.

Dismantling of boarding any description fixed in any position with nails complete all specified and directed by engineer-in-charge complete all specified and directed by engineer-in-charge.

M&L 4mm thick veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on wall complete all specified and directed by engineer-in-charge.

M&L 4mm thick veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on ceiling.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling complete all specified and directed by engineer-in-charge.

All as per Ser item No 34 above but except timber complete all specified and directed by engineer-in-charge.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all specified and directed by engineer-in-charge.

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm complete all specified and directed by engineer-in-charge.

M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all specified and directed by engineer-in-charge.

All as per Ser item No-35 here in above but except boarding complete all specified and directed by engineer-in-charge.

S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched complete all specified and directed by engineer-in-charge.

Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each complete all specified and directed by engineer-in-charge.

S&F 2nd class hard wood plain soild, straight chowkats and frame wrought, framed rebated on soild, rounded or chamfered, put together with pinned at joints complete all specified and directed by engineer-in-charge.

S&F 35 mm thick , Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats, complete all specified and directed by engineer-in-charge.

S&F 35mm thick 2nd class hardwood glazed & skeleton shutter open rebated and prepared to receive glass or wire mesh gauge etc (without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-II section 8 clause 8.23(b) complete all specified and directed by engineer-in-charge.

S&F 30mm thick 2nd class hard wood glazed & skeleton window shutter open rebated and prepared to receive glass or wire mesh gauge etc (without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-II section 8 clause 8.23(b) complete all specified and directed by engineer-in-charge.

S&F 100mm size MS butt hinges medium weight cold rolled complete all specified and directed by engineer-in-charge.

S&F 75mm size MS butt hinges medium weight cold rolled complete all specified and directed by engineer-in-charge.

S&F 150mm length aluminium anodised barrel tower bolts of extruded section complete all specified and directed by engineer-in-charge.

S&F 100mm length aluminium anodised barrel tower bolts of extruded section complete all specified and directed by engineer-in-charge.

S&F 150mm length aluminium anodised handle cast type complete all specified and directed by engineer-in-charge.

S&F Aluminum anodized handles cast type of 100 mm all as complete all specified and directed by engineer-in-charge.

S&F 75mm length aluminium anodised handle cast type complete all specified and directed by engineer-in-charge.

S&F 250mm long aluminium alloy, anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staplecomplete all specified and directed by engineer-in-charge.

S&F 300mm ordinary rat tail rod pattern springs including rooler and roller plate of mild steel complete all specified and directed by engineer-in-charge.

S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty or with wooden beads not.exc 0.5 sqm in each pane complete all specified and directed by engineer-in-charge.

S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks or glavanised wire staples complete all specified and directed by engineer-in-charge.

S&F framed work such as grills gratings etc with end of bars shoulderd and or riveted or forged in to spikes framed guard bars, barred iron door/windows etc and similar work concorming to Fe-290 Gde E-165 complete all specified and directed by engineer-in-charge.

Dismantling of plain/corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof covering complete all specified and directed by engineer-in-charge.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or `J' type or cranked hook bolts etc including bitumen washer in roofs, with 275 grams/sqm zinc coating complete all specified and directed by engineer-in-charge.

S&F 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing etc with grade of zinc coating 275 complete all specified and directed by engineer-in-charge.

All as per ser item No 60 above but except sheeting complete all specified and directed by engineer-in-charge.

S&F mild steel plates, wind ties for roof incl secur- ing bolts and work confiring to Fe-290 Gde E-165 complete all specified and directed by engineer-in-charge.

M&L for tubular curtain rail 20mm dia of aluminium anodised complete all specified and directed by engineer-in-charge.

Preparation surfaces, plastered or unplastered new surfaces on wall and applying two coats of cement base paint complete all as specified and directed.complete all specified and directed by engineer-in-charge.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Preparation of old painted surface of steel , not otherwise described over 10 cm width or grith two coat of synthetic enamel paint complete all specified and directed by engineer-in-charge.

Preparation of old painted surfaces of any descriptoin, not otherwise described, over 10cm witdth or girth and applying two coat of synthetic enamel paint on wooden surfaces complete all specified and directed by engineer-in-charge.

S&F, vitreous China ware wash hand basin white of size 550 x 400mm incl CP waste coupling and PVC waste pipe and MS steel brackets in repairs. complete all specified and directed by engineer-in-charge.

S&F 15mm bore pillar tap fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked ,complete all specified and directed by engineer-in-charge.

S&F Vitreous China urinals, half stall type ,fixed in repair incl CP coupling ,vest pipe and all necessary fitting ,complete all specified and directed by engineer-in-charge.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60 gms) ,complete all specified and directed by engineer-in-charge.

S & F 75 mm bore PVC (SWR) pipes single socked, in any length with rubber ring joints, laid in trenches or in floors ,complete all specified and directed by engineer-in-charge.

M&L for 110 mm dia PVC (SWR) Pipe single socketed in any length with rubber joints laid in trenches or in floors ,complete all specified and directed by engineer-in-charge.

S & F PVC SWR Floor trap of 75 mm outlet plain with grating including jointing to wast pipe and fixed with solvent cement,cement concrete 1:2:4 B1 ,complete all specified and directed by engineer-in-charge.

S&F PVC (SWR) bends of bore 75mm ,complete all specified and directed by engineer-in-charge.

S&F 75mm bore PVC (SWR) bends any radius with providing acceess door ,complete all specified and directed by engineer-in-charge.

Taking up or down steel tubing and connections, size 15mm dia bore, including cleaning for re-fixing or removal to stores, ,complete all specified and directed by engineer-in-charge.

M&L for, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 15 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, ,complete all specified and directed by engineer-in-charge.

S&F tube medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of following sizes 15mm bore of pipe ,complete all specified and directed by engineer-in-charge.

S&F 15 (Concealed type).stop valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes but fancy type C.P. with long shank complete all specified and directed by engineer-in-charge.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 15mm bore dia of pipe complete all specified and directed by engineer-in-charge.

S&F 15mm bore CP Bib taps, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron or brass ferrule and fixed but fency type complete all specified and directed by engineer-in-charge.

S&F bib taps, cast copper alloy, fancy type with capstan head, crutch or butterfly handle chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore, fixed as in repair, complete all specified and directed by engineer-in-charge.

Supply and fix, angular stop valves , cast copper alloy, screwed down high pressure, fancy type with crunch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions, or for 15mm dia bore, fixed as in repairs, complete all as specified and directed.

S&F, PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, fixed as in repairs, complete all specified and directed by engineer-in-charge.

S&F grating square (SLIT) 150mm size, of PTMT (Openable), fixed as in repairs, complete all specified and directed by engineer-in-charge.

S&F,Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all specified and directed by engineer-in-charge.

S&F 15mm bore pillar tap fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked ,complete all specified and directed by engineer-in-charge.

S&F flushing cistern PVC, low level of capacity of 10 ltr, white, valveless syphonic action type complete with inlet ball valve float and handle or Push button type including brackets, and PVC connection complete all specified and directed by engineer-in-charge.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all specified and directed by engineer-in-charge.

S & F rolled mild steel in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam,tee, angle, channel or flat sections)incl distance pieces, cleats, etc conforming to grade Fe-410W-(Gde E-250 Quality A) complete all specified and directed by engineer-in-charge.

S & F MS bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if reqd, hooks(stay), hook and pintle hinges, large hasp and staples, clamps, hold fasts, wall ties, plain angle cleats for securing purlins to wood trusses or rafters and similar small articles confirming to Fe-290 Gde E-165 complete all specified and directed by engineer-in-charge.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile stength of 550Mpa as in roof coverings/cladding to wall, fixed with self tapping screws complete all specified and directed by engineer-in-charge.

S & F Pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of colour having tensile stength of 550Mpa as in roof coverings/cladding to wall, fixed with self tapping screws as specified.

S&F 5 mm thick Printed PVC sheet used instead of plain colour PVC shectplain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all specified and directed by engineer-in-charge.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to urrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all specified and directed by engineer-in-charge.

M & L for mild steel TMT bars 10 mm dia and over , quality,cut to length, bent to shape required including cranking, bending and binding with mild steel wire( annealed ) not less than 0.9mm dia complete all specified and directed by engineer-in-charge.

M&L Mild steel bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups,spacers and binders complete all specified and directed by engineer-in-charge.

S&F in opening, Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, complete all as specified and directed.

S&F in the frame at site, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet 5mm thick to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing in SSR Part-II, complete all specified and directed by engineer-in-charge.

S&F 30mm thick 2nd class soft wood glazed & skeleton window/ventilator shutter open rebated and prepared to receive glass or wire mesh gange etc( without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-I section 8 clause 8.24(b) complete all specified and directed by engineer-in-charge.

S&F 4 mm thick figured glass,pinhead type, in squares not exceeding 0.5 Sq. m in each pane complete all specified and directed by engineer-in-charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc.complete all specified and directed by engineer-in-charge.

M&L for pre cast cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) in landings, cover- slabs (for man holes etc.) chullah hoods, chajjas, water troughs, managers, shelves and similar articles with plain faces complete all specified and directed by engineer-in-charge.

S&F LLDPE septic tank with upflow filter including media designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete for 20 users complete all specified and directed by engineer-in-charge.

Construction of soakage well 2.40m internal diameter and 3.00 m depth including excavation in any type of soil, foundationin PCC 1:3:6 type wall honeycomb masonary with top ring RCC M-25 concrete including interseptic chamber and screen chamber made of brick masonry in CM RCC cover slab in M-25 / SFRC cover, interconnecting pipe of RCC / DWC complete all specified and directed by engineer-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.(a) One light point/fan point/exhaust fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board complete all specified and directed by engineer-in-charge.

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories complete all specified and directed by engineer-in-charge.

S&F Socket outlet 3 pin, 5 Amps, flush type complete all as specified and as directed complete all specified and directed by engineer-in-charge.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts,complete all specified and directed by engineer-in-charge.

S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type,universsal complete all specified and directed by engineer-in-charge.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor complete all specified and directed by engineer-in-charge.

S&F Switch socket combination Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all specified and directed by engineer-in-charge.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all specified and directed by engineer-in-charge.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all specified and directed by engineer-in-charge.

S&F rose 3 terminal / PVC/ Polycarbonate, isolated body complete all specified and directed by engineer-in-charge.

S&F Sheet metal enclosures for DB’s (when MCBs are to be used), double door, single pole and neutral 8 way, 240 volts with 200 Amp rated bus bar, complete all specified and directed by engineer-in-charge.

S & F MCB 6 to 32 Amps, 240 Volts, Gold plus MCB B Curve complete all specified and directed by engineer-in-charge.

S & F MCB, DP 40 Amps 415 Volts Gold plus MCB C Curve complete all specified and directed by engineer-in-charge.

S & F Bulkhead luminaire comprising of high brightness LEDs 10W LED, IP-65/66 complete all specified and directed by engineer-in-charge.

S&F surface and wall mounted led tube light fitting 20W, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver including connection from ceiling rose to tube light with suitable size of flexible cable complete all as specified and as directed by Engr in Charge.

S&F LED Lamp 15 W complete all specified and directed by engineer-in-charge.

S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all specified and directed by engineer-in-charge.

M&L for Sub main wiring with 2 runs of 6 sqmm PVC insulated multi stranded FRLS copper cable drawn through PVC casing capping of required size with accessories along with 1 run of 6 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring complete all as specified and as directed. Note :- Two runs of 6 sqmm and one runs of 4 sqmm cable as earth along with PVC conduit will be measured as one length.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work as excavation, RF and removal etc

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 10 sqmm complete all specified and directed by engineer-in-charge.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pieces for inlet and outlet for water etc complete all specified and directed by engineer-in-charge.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all specified and directed by engineer-in-charge.

S&F in repair house service cable bracket (hook type complete with 3mm long GI pipe 40mm dia medium grade 90 degree bends with stay and guy complete all specified and directed by engineer-in-charge.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts,6 Amps, complete all specified and directed by engineer-in-charge.

Repair and re-fixing, re-assembling the existing celling fan in same original position along with cable after rectification of defects such as apply the one coat varinsh for windings, painting fan blades, changing fan bearning, rewinding of fan, write MES no on fan blades including nut, bolts and washers complete all as specified and as directed by Engineer-in-Charge.

S&F isolator SPN upto 32 Amp complete all specified and directed by engineer-in-charge.

S&F 2x2.5 sq. mm +1x1.5 sq. mm earth wire FRLS complete all specified and directed by engineer-in-charge.

S&F LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and as directed by Engineer-in-Charge.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

m/s mohd rafiq lone

M/S GHULAM NABI LONE AND BROS