Construction of RCC road work and other related work at S.G.Highway to 132 ft Ring road area and other area of Bodakdev ward of North West Zone. (ARC) (Reinvite)

NAME OF WORK: Construction of RCC road work and other related work at S.G.Highway to 132 ft Ring road area and other area of

Bodakdev ward of North West Zone. (ARC) (Reinvite)

It. No. Item Description Qty Unit

Dismantling the following including loading, unloading and disposal of

1 unserviceable material for all lead or as directed by Engineer-In-Charge and

stacking the serviceable material and backfilling the resulting trenches and

a central verge -kerb stone 1 Rmt 8

Dismantling tiled or stone floors laid in mortar including stacking of

2 serviceable material and disposal of uservicalble material with all lead and 5 Smt 47.25

lifts. SOR 23-24 IT CD NO:20005

Demolition & disposal of unservisable material with all lead and lift for

unreinforeced concrete. SOR 23-24 IT CD NO:20001B

Demolition of brick work & stone masonry including stacking of serviceable

d materials and disposal of unserviceable materials with all lead and lift (1) In 1 Cmt 544.95

cement mortar. SOR 23-24 IT CD NO:20003B

Demolition including stacking of serviceable materials and disposal of

e unserviceable materials with all lead and lift. (I) R.C.C work. SOR 23-24 IT CD 1 Cmt 1047.38

Extra rate over item of excavation of earth for excavation of asphalt

pavement / RCC of thickness up to 0.20 meter including demolishing the

3 asphalt carpet, metal,s oiling/cutting Reinforcement etc.comp. with stacking

the material as directed. (Based on Previously approved rate by C E sir )

a up to 0.20 meter thickness (By Manual) 175 Smt 71.1

0.20 to 0.30 meter (By any type of Breaker Machine or R.C.C.Cutter machine

including cost of operator, fuel, & transportation etc complete.

0.30 meter & above (By any type of Breaker Machine or R.C.C.Cutter machine

including cost of operator, fuel, & transportation etc complete.

Barricading the entire break down or excavated area on rental basis using

wooden ballies / M.S.angles at max. 2.00 meter centre to centre, C.G.I. Sheet,

reflective paint / Board out side to avoid accident & for smooth traffic

diversion & movement including cautionary board etc. Item also includes for

making temporary sufficient nos of lighting arrangement through out the

work with necessary required arrangement. ..The same shall be removed

after completion of work. (Only for break down work from start to complete)

Box cutting the road surface to proper slope and camber for making a base

5 for road work including removing the excavated stuff and depositing on the 120 Cmt 205.35

road side slope as directed upto 200 Mt.lead

Conveyance charge of earth, lime, murrum, building rubbish, manure,

garbage, sludge, excavated rock, fly ash, aggregates of any kind executed

6 outside the road site. Rate also includes spreading & levelling etc complete.

Internal conveyance above 50 mt done within the work site is not payable.

a a) Lead up to 1 Km. 1 Cmt 23.38

b b) Lead From 1Km to 2 Km. 1 Cmt 30.94

c c) Lead From 2 Km to 3 Km. 1 Cmt 38.37

d d) Lead From 3 Km to 4 Km. 1 Cmt 45.52

e e) Lead From 4 Km to 5 Km. 1 Cmt 52.42

f f) Lead From 5 Km to 10 Km. 120 Cmt 78.54

g g) Lead From 10 Km to 15 Km. 20 Cmt 104.65

h h) Lead From 15 Km to 25 Km. 1 Cmt 224.99

Providing, laying, spreading and compacting graded stone aggregate to wet

mix macadam specification including premixing the Material with water at

7 OMC in mechanical mix plant carriage of mixed Material by tipper to site, cmt 2010

laying in uniform layers in sub- base / base course on well prepared surface

and compacting with vibratory roller to achieve the desired density as per

Codal Provision.

A Production & Supply of WMM 50 Cmt 1975

B Laying of WMM 50 Cmt 35

Repairing damaged M.H. and rasing M.H. up to road level incl. removing

8 damaged brick work and repairing by brick masonry in C.M. 1:5 and plaster in

C.M. 1:3 and fixing C.I. steps and existing MH sheet cover, removing the

debris from MH and carting the same as directed.

a (A) up to 0.15 mt. (@ Two Coarse) 10 Nos. 728.82

b (B) up to 0.35mt. (@ Four Coarse) 10 Nos. 1155.44

c (C) up to 0.65 mt. (@ Seven Coarse) 1 Nos. 1786.49

d (D) up to 0.90 mt. (@ Ten Coarse ) 1 Nos. 2150.9

Repairing damaged I.C./ Raising removing damaged brick work and repairing

by brick masonry in C.M. 1:5 and plaster in C.M. 1:3 and fixing C.I. steps and

existing chamber sheet cover, removing the debris from chamber and carting

the same as directed.

Providing, laying and jointing in true line and level UPVC pipe (SCH-40) of

10 following dia. Including fittings of standard make as approved by Engineer-in-

a 15mm (IT CD NO 23061) 1 Rmt 71.93

b 25 mm (IT CD NO 23062) 1 Rmt 90.93

c 40 mm (IT CD NO 23064) 1 Rmt 146.65

d 50 mm (IT CD NO 23065) 1 Rmt 193.73

Providing and supplying,and jointing ISI mark only standard length stoneware

pipes of following class and diameter including excavation for laying of pipes,

insurance, transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. compl.

11 (IS651/1989 or its latest revision) including labour work for lowering, laying,

joiting with cement mortar (1:1) proportion, proper postion, grade and

alignment and all level as directed by engineer in charge including store to

site of work jointing material etc complete

a 100 mm dia (IT CD NO 24001AA) 1 Rmt 211.05

b 150 mm dia (IT CD NO 24001BA) 1 Rmt 288.23

c 230 mm dia 1 Rmt 400.54

DI to PVC connection Making/ Reparing Connection work for the following

a 50 mm dia 0 No. 841.69

b 75 mm dia 0 No. 1006.12

c 90 mm dia 0 No. 2537.52

d 110 mm dia 0 No. 2878.82

Brick work using common burnt clay building bricks having crushing strength

not less than 35kg./Sq.Cm. In foundation and plinth in Cement Mortar 1:5.(1-

13 Cement: 5 -fine sand)(B) Conventional.(R & B Building Road Bridge SOR 2023- 1 Cmt 4011.66

24 Item Code 06001BA,Item No.as per NBO-6.12 page no.70 )

Providing15mm thick cement plaster in single coat on Rough (Similar) side of

single or half brickwalls for interior plastering upto floor two level and

14 finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) (R & B 1 Smt 174.83

Building Road Bridge SOR 23-24 Item Code 17002A,Item No.as per NBO-17.6

Providing F.R.C. MH seat cover incl. carting to the work site etc. comp.

15 Directed. (Based on rate of central store circular 01/2021-22, Dt. 13-08-21)

F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers. Cover : 728mm ø &

A mm thick circular cover, 35.00 MT load design, 100x2mm MS flat allround, 10 Nos. 1368.75

16mm ø plain round bar for lifting the cover & should be fitted with plastic

Carting and Fixing M.H., Chamber or Catchpite Seat and Cover in line and

16 level to match exisisting road level in C.C. 1:2:4 and finishing smooth, 2 Nos. 746.59

watering and protecting for 7 days etc. complete as directed. M.H. seat

cover will be supplied byA.M.C.(from any store)

Constructing Bombay Pattern Type Catch Pit of size 0.60 x 0.60 depth up to

mt including excavation, B.B.C.C. (1:5:10), 23 cms thick brick maso. wall in the

17 prop. of CM (1:6) with 40 mm thick IPS flooring in the prop M15 at bottom 2 Nos. 3110.8

and 15 mm thick cement plaster inside the catch pit in the proportion of CM

(1:3) with out jali etc. comp. as directed.

Catch Pit Jali Fixing P/F FRC catch pit jali with frame 600mm x 600mm clear

18 opening etc. comp.. As directed by Engineer-in-Charge and/or his authorized

representative.

A 20 MT Capacity 1 Nos. 3178.57

B 35 MT Capacity 1 Nos. 3784.82

Supplying and fixing of 380 mm H x 300 mm L x 200 mm B Kerb block for

Central Verge in M-20 grade using 20 mm nominal size black trap aggregate

of Sevaliya/Timba or equivalent quality for pre-cast blocks, reasonably

exposed finish/ formwork, mould with well equipped with vibratory system

for kerb stones of approved design including curing, etc. complete, including

the cost of formwork etc. complete. The rate shall also include necessary

19 cutting of asphalt, fixing the Kerb stones in line and level on 5 cm thick sand 1 Rmt 431.96

bedding with necessary equipments and materials. The rate shall also include

the flush pointing in CM (1:3) for all joints of the kerbstones. Filling of zari

alone the sides of the kerb stone fixed with Bituminous concrete mixed in

proper position as directed by Engineer in change to form a portable mixture.

In any case Gravel or such type of materials shall not be allowed for

productiona) Laying on 5 cm thick Sand Bedding

Supplying and fixing of 300 mm-L x 150 mm-B x 380 mm-H Kerb block for

Footpath in M-20 grade using 20 mm nominal size black trap aggregate of

Sevaliya/Timba or equivalent quality for pre-cast blocks, reasonably exposed

finish/ formwork , mould with well equipped with vibratory system for kerb

stones of approved design including curing, etc. complete, including the cost

of formwork etc. complete. The rate shall also include necessary cutting of

20 asphalt, fixing the Kerb stones in line and level on 5 cm thick sand bedding 30 Rmt 350.89

with necessary equipments and materials. The rate shall also include the flush

pointing in CM (1:3) for all joints of the kerbstones. Filling of zari alone the

sides of the kerb stone fixed with Bituminous concrete mixed in proper

position as directed by Engineer in change to form a portable mixture. In any

case Gravel or such type of materials shall not be allowed for production. a)

Laying on 5 cm thick Sand Bedding

Providing, supplying and fixing pre cast C.C. blocks (M-20) edge kerb having

size of 75 x 300 x 300 mm depth and as per design conveying it to the site,

jointing into C:M 1:3 and racking out the joints incl. necessary excavation of

asphalt, soil etc. completed. (App Rate)

Pre cast concrete kerb Providing and fixing M25 Grade of concrete precast

exposed / Fair finish / texture finish kerb stones of approved make as per

approved sample of any size and any type. Kerbs shall be fixed on the

foundation prepared as per approved design. The rate shall also include for

erecting and fixing the pieces in position for complete kerb system with

chamfered type of kerbs including necessary accessories of kerb like radius

22 kerb, angles and quadrant kerbs, droplet kerbs etc. complete as per drawing. 1 Rmt 1061.61

Kerb shall be fixed as paper joint without any jointing material. However

cement mortar shall be provided at the backside of kerb stone joint. (Sample

must be approved) Cost of excavation, cutting , base , side filling shall

includes as directed engineer - incharge in above item description as per BOQ

(a) 450 hight x 600x 150 mm high median kerb.

Pre cast concrete kerb Providing and fixing M25 Grade of concrete precast

exposed / Fair finish / texture finish kerb stones of approved make as per

approved sample of any size and any type. Kerbs shall be fixed on the

foundation prepared as per approved design. The rate shall also include for

erecting and fixing the pieces in position for complete kerb system with

chamfered type of kerbs including necessary accessories of kerb like radius

23 kerbs, angles and quadrant kerbs, droplet kerbs etc. complete as per drawing. 30 Rmt 912.5

Kerb shall be fixed as paper joint without any jointing material. However

cement mortar shall be provided at the backside of kerb stone joint. (Sample

must be approved) Cost of excavation, cutting , base , side filling shall

includes as directed engineer - incharge in above item description as per BOQ

(b) 380 x 600 x 150 mm high Footpath kerb.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

24 concret as per approved design and including excavation for fixing in proper 1 Rmt 376.43

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

SOR 23-24 IT NO 14023A

Supplying and fixing for central verge 230 mm L x 235 mm Width x 680 mm

H Supplying & Fixing in M-20 grade using 20 mm nominal size black trap

aggregate of sevaliya/timba or equivalent quality for pre-cast

blocks,reasonably exposed finish/formwork,mould with well equipped with

vibratory system for kerb stones of approved design including

curing,etc.complete,including the cost of formwork etc.complete.THe rate

25 shall also include necessary cutting of asphalt,fixing the kerb stones in line 1 Rmt 1376.75

and level on 5 cm thick sand bedding with necessary equipments and

materials.The rate shall also include the flush pointing in CM(1:3)for all joints

of the kerbstones.Filling of Zari alone the sides of the kerb stone fixed with

bituminous concrete mixed in proper position as directed by engineer in

charge to form a portable mixture.In any case gravel or such type of materials

shall not be allowed for production.

Providing and Laying of Rubber Moulded Paver Block Grey/Coloured 60 mm

thick, M-35 Grade of any size ; shape (Usually Uni-Paver Blocks) using black

trap good quality aggragate of 20 mm nominal size for footpath, parking

areas, service lanes and other areas as mentioned in the drawing /

instruction of engineer in charge. Cost includes formworks using rubber

mould, Rate providing and laying paver blocks as per required grading and

specification. The paver block shall be mechanically compacted. The work

26 of paving blocks shall be executed in line and level by skill mason of flooring 100 Smt 501.6

work only. It should be laid in such a way that the no cutting of the paver

block to be necessary. if cutting of paver block necessary then it should be cut

by machine only and carting. The finished surface of the paver block shall

have resonably good, plain finished. Paver blocks shall be compacted and

shall be relaid if necessary. Gravel or such type of materials shall not be

allowed for production. Laying on 5cms thick sand beddding.

Providing and laying of interlocking grey paver blocks of high density 80mm

thick made from M-40 grade concrete using 6 mm to 20 mm machine

crushed well graded stone aggregate, sand of approved quality, OPC 53 grade

cement with contractor's own concrete mix design as approved by AMC, for

parking, road. Cost Includes formwork, using rubber/FRP mould, laying paver

block as per required grading and specification laid paver block shall be

mechanically compacted. The work of the paving blocks shall be executed in

line and level by skilled mason of flooring work only. It should be laid in such

a way that the no cutting of the paver block to be necessary. Cutting of paver

block by machine cut only and carting to be done. The Finished surface of the

Paver Block shall have reasonably good plain finish. Paver blocks shall be

compacted and shall be re-laid if necessary. Gravel or such type of materials

shall not be allowed for production. Laying on 5 Cms thick sand bedding.

Paver Block Providing and laying shot blasted Non - interlocking, Paver

blocks of specified thickness, size, grade of concrete and colour machine

made and blasting by automatic shot blasting machine and high density of as

per approved sample of approved make for footpath, parking areas, service

lanes,cross over and other areas as mentioned in the drawing. Including

providing and laying 50 mm thick averave bedding layer of coarse sand below

paver block as per required grading and specification. Laid paver block shall

be mechanically compacted. The work of the paving blocks shall be executed

28 in line and level by skilled mason of flooring work only. Small size of paver 30 Smt 669.65

block with same specification shall be used at residue or at end. It should be

laid in such a way that the no cutting of the paver block to be necessary. If

cutting of paver block shall be required , than cut by machine only and laying

to be done by skilled flooring mason. The finished surface of the paver block

shall have coarse sand Texture Finish. Pave blocks shall be compacted and

shall be re-laid if necessary. Actual laid area shall be measured and paid

without any wastage. (A) 60 mm thick M-35 grade Grey Paver block of size

Paver Block Providing and laying shot blasted Non - interlocking, Paver

blocks of specified thickness, size, grade of concrete and colour machine

made and blasting by automatic shot blasting machine and high density of as

per approved sample of approved make for footpath, parking areas, service

lanes,cross over and other areas as mentioned in the drawing. Including

providing and laying 50 mm thick averave bedding layer of coarse sand below

paver block as per required grading and specification. Laid paver block shall

be mechanically compacted. The work of the paving blocks shall be executed

29 in line and level by skilled mason of flooring work only. Small size of paver 1 Smt 758.93

block with same specification shall be used at residue or at end. It should be

laid in such a way that the no cutting of the paver block to be necessary. If

cutting of paver block shall be required , than cut by machine only and laying

to be done by skilled flooring mason. The finished surface of the paver block

shall have coarse sand Texture Finish. Pave blocks shall be compacted and

shall be re-laid if necessary. Actual laid area shall be measured and paid

without any wastage. (A) 80 mm thick M-35 grade Grey Paver block of size

Labour work of fixing kurb any design of central verge, (both side) footpath

kurb, items includes necessary excavation, asphalt cutting of any thickness,

30 erecting in line and position and pointing with cement mortar (1:3), watering, 0 Rmt 136.4

etc complete, filling with zari along the side of the kurb, the kurb stone fix

prepared with bitumnious top surface, as directed by engineer in charge.

Soil Filling for Gardening/Plantation Providing and laying good quality garden

soil, obtained from outside which can be useful for all plants as per

specification. Garden soil shall be mixture of 1 part Garden Sweet Soil 1 part

31 Coco Peat: 1 part Well Rotted Organic Compost (1:1:1) including laying of soil 0 Cmt 898.9

in required quantity and in proper slope as mentioned in drawing, watering,

compacting and dressing etc. complete, as directed in specifications and by

engineer in charge.Law Garden Rate)

Providing and laying cement concrete 1:5:10 (1- Cement : 5- fine sand : 10-

32 graded brick bat aggregates 40mm nominal size) and curing complete. SOR 1 Cmt 2492.51

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-

33 Hand broken stone aggregates 40mm nominal size) and curing complete. 1 Cmt 4006.15

SOR 23-24 IT NO :05005A

Ready mix concreteProviding and laying in position Ready mix concrete/

batch mix concrete of specified grade for reinforced cement concrete work,

using cement content as per approved design mix (Min cementitious level as

per latest IS 456 shall be maintained) manufactured in fully automatic

batching plant and transported to the site of work in transit

mixer for all lead having a continuous agitated mixer, for reinforced cement

concrete work including pumping from transit mixer to site of laying; cost of

34 admixtures in recommended proportions as per IS: 9103 to accelerate, retard

the setting of concrete, improve workability without impairing strength and

durability; finishing, compacting, vibrating, curing, dewatering (if required),

etc, excluding the cost of Formwork and reinforcement, etc complete for all

elements, all floors, all level, any heights/ depths, any lead and lift as directed

by Engineer Incharge.

A Concrete of M 15 grade (R & B SOR 23-24 IC: 5054 Page 66) 40 Cmt 3790.21

B Concrete of M 20 grade (R & B SOR 23-24 IC: 5055 Page 66) 1 Cmt 4793.1

C Concrete of M 25 grade (R & B SOR 23-24 IC: 5056 Page 67) 70 Cmt 4853.56

D Concrete of M 30 grade (R & B SOR 23-24 IC: 5057 Page 67) 0 Cmt 5043.66

Providing & Applying Trimix with Machine floater machine on constructed

RCC work including Machine & Labour etc Comp as directed.

Making 15 mm. Groove in RCC work on road & filling it with polysulfied selant

& finished ot good incl. all labour charges etc. comp.as directed.

Painting Two Coats on divider and footpath curb surface / New Concrete

37 Surface ( Painting two coats after filling the surface with synthetic enamel 1 Smt 71.86

paint in all shades on new plastered concrete surfaces)

RETRO –REFLECTORISEED TRAFFIC SIGNCautionary Warning Sign :-Providing

and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 90 x 90 x 90 cms. equilateral triangle as per

design of IRC-67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy

paint ; reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type- 4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x 75 x 6mm /

65NB Circular MS Pipe as required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black

and white bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective

sheeting SOR 2324 IT CODE:26092B

Supplying And Fixing Jumbo bollard swiss type Made out of 1.5 cm crc

sheet height 188 cms. Bottom dia 30 cms. Top dia 18cm. With

direction plate of 45cm dia. Fabricated as per attached drawing, pre

39 treated with phospheting process painted with apoxy coating 0 Nos. 6463.35

reflectorised with retro reflective sheetings specified by M.O.R.T & H.'s

latest specification.(B) High Intensity Grade.

RETRO –REFLECTORISEED TRAFFIC SIGN Regulatory / Mandatory Sign :-

Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size 60 cms Dia Circle as per design of IRC-

67-2012. Pre treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11

as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post

of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality

epoxy coatings in black and white bends. The details of symbol foreach board

shall be as per theinstruction of engineer in charge. The fixing at site shall be

in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation,

curing etc.complete under the supervision of engineer in charge. A warranty

for 10 years for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting SOR IT CO:26094C

Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 80 x 60 cms.

rectangular as per design of IRC- 7-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint ; reflectorised with High Intensity rismatic Grade

retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x 75 x 6mm /

65NB Circular MS Pipe as required and frame fabricated from suitable size

41 iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black 0 Nos. 3951.1

and white bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective

sheeting. SOR 23-24 IT CD NO :26093B

Hazard Marker Sign :-Providing and fixing sign boards made out of 2.0 mm

aluminium sheet / 4 mm ACP (Aluminum composite Panel); size 90x30 cms.

rectangular as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 1.8mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size iron

42 angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and 0 Nos. 3630

white bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including xcavation, curing

etc.complete under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting SOR 23-24 IT CODE:26102C

Give Way Sign :-Providing and fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms.

equilateral triangle as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size iron

43 angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and 0 Nos. 5027

white bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting SOR 23-24 IT NO:26097c

Providing and fixing Swiss type bollard made out of 1.5mm CRC

sheet ,height 140cms,bottom dia 23cm,top dia 12cm with direction

plate of 30 cm dia fabricated necessary anchors as directed and also

44 provide through out lengh pipe of 25 NB for the strenthing of 0 Nos. 3696

bollard and reflectorised Micro Prismatic Grade Sheet (Type XI)and

three yellow strip 6 Inches wide of Type XI Retro reflective Sheeting,

fixing with P.C.C M25 grade concrete(Foundation size 30cm×30cm×35cm).

Direction (Junction) Sign :-Providing and fixing sign boards made out of 2mm

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 244x122 cms.

rectangular as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint ; reflectorised with High Intensity Prismatic Grade

retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post of Iron Angle 75 x 75 x

6mm / 65NBCircular MS Pipe as required and frame fabricated from suitable

45 size iron angle of 50x50x5mm; painted with bestquality epoxy coatings in 0 Nos. 21076.74

black and white bends. The details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the Supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting SOR 23-24 IT CODE 26098B

Providing TMT Bar FE500D reinforcement for R.C.C. Work including

46 bending,binding and placing in position complete upto floor two level SOR 23- 1500 Kg 75.46

Providing and setting 50 to 60 mm thick rouge kotah stone water table in line,

level and in required gradient including 25 mm thick beddcing in C.M. 1:6 (1

Part of cement : 6 Part of coarse sand) with sufficient ramming consolidation.

47 Providing joints in C.M. 1:3 (1 Part of cement : 3 Part coarse sand) and

smooth pointing in C.M. 1:1 (1 Part of Cement, 1 Part of coarse sand)

including watering etc. complete and as per details in tender specification &

as directed by engineer in charge.

B Size : 1' x 1'(40 to 50 mm thick) 0 Rmt 103.52

Fabricating, supply and erecting in position Standard Structural steel sections

conforming to IS 2062 for railing , skywalk, stair, or other works using ISMB,

ISA, ISMC, MS plate, flat, square bars, pipe, square pipe, rectangular sections,

square section, tube, etc. including welding, cutting, wastage, etc. complete.

The rate is inclusive of welding rod, supply & fixing of correct size nut, bolts,

washers, including one primer coat of red lead paint conforming IS:102 Zinc

48 chromate paint conforming to IS:104 followed by two coat of aluminium 0 Kg 126.68

paint as per IS:2339 OR enamel paint of color as selected by engineer

incharge, with all contractor's materials, labour, tools & plants, in

bolted/welded construction as directed by Engineer-in Charge. The waste cut

pieces shall not be included in the paying quantity. The work shall be done as

per drawing and specification. The work shall be carried out as per IS:800,

Labour work for fixing interlocking blocks / any kind of pavement on up to

49 mm th sand bedding, levelling, watering and fixing in line & level as well 200 Smt 68.64

cleaning the site etc.comp. as directed.

Supply and installation of concrete bollard of size 300mm diameter x 900mm

50 height, constructed using M-30 concrete and 4nos 8mm dia MS Fe500 0 Nos. 1725

reinforcement through the section as directed by EIC including supply of all

Providing and fixing Tree Guard with grey exposed finish in grade M-20 with

51 nominal steel and wall thickness of 100mm. (Approved Extra Item Rate)

a Outer Size 700X700 5 NO. 794.64

b Outer Size 900X900 5 NO. 1121

Providing formwork of ordinary timber planking so as to give a rough finish

including centering shuttering strutting and propping etc. Height of propping

and centering below supporting floor to ceiling not exceeding 4 M. and

52 removal of the same for in situ reinforced concrete and plain concrete work 50 Smt. 171.68

in. (A) Foundations Footings Bases of Columns etc. and Mass concrete. (R&B

Ahmedabad City SOR 2023-24, Item No.09001AA-9.1)

Paver Block Providing and laying, Dished Channel specified thickness, size,

grade of concrete and colour machine made and blasting by automatic shot

blasting machine and high density of as per approved sample of approved

make for suite drain besides paking area and other areas as mentioned in the

drawing. Including providing and laying 50 mm thick average bedding layer of

coarse sand below dished channel as per required grading and specification.

Laid dished channel shall be mechanically compacted. The work of the dished

channel shall be executed in line and level by skilled mason. Small size of

dished channel with same specification shall be used at residue or at end. If

cutting of dished channel shall be required , than cut by machine only and

laying to be done by skilled flooring mason. Actual laid area shall be

measured and paid without any wastage. (A) 600 mm X 300 mm X 100 mm

thick M-25 grade Grey dished curved channel Make VYARA or Equivalent

Total Amount Rs.

Total Amount Rs.