Renovation and Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 NS AMOUNT TOTAL AMOUNT

BILL OF QUANTITIES

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

SUB HEAD-A :- Civil WORK

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means

over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan)

1 2.6 including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth

to be levelled and neatly dressed.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

2 2.25 etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by Cum 94.5 253.95 23998.28

ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sand under floors, including watering, ramming,

consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of

4 4.1 centering and shuttering - All work up to plinth level :

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)

including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,

5 4.2 string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills,

fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering

5.1 4.2.3 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone cum 11.27 9375.2 105662.25

aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for :

6.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 85 307.9 26171.5

6.2 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 250 608.35 152087.5

6.3 5.9.6 Columns, Pillars, Piers, Abutments, Posts and struts. Sqm 10.8 804.25 8685.9

6.4 5.9.19 Weather shade, Chajjas, corbels etc., including edges Sqm 5 814.95 4074.75

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.

7.1 5.22.6 Thermo-Mechanically Treated bars Kg 712.152 89.65 63844.43

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

8.1 5.22A.6 Thermo-Mechanically Treated bars Kg 2000 89.65 179300

Signature of Contractor with Seal 1 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Providing and laying in position machine batched and machine mixed Design Mix M-25

grade cement concrete for reinforced cement concrete work, using cement content as

per approved design mix, including pumping of concrete to site of laying but excluding

9 5.33 the cost of centering, shuttering, finishing and reinforcement, including admixtures in

recommended proportions as per IS: 9103 to accelerate, retard setting of concrete,

improve workability without impairing strength and durability as per direction of Engineer-

9.1 5.33.1 All works upto plinth level cum 7.56 7997.3 60459.59

9.2 5.33.2 All works above plinth level upto floor V level cum 45 10080.15 453606.75

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in foundation and plinth in

10.1 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) Cum 125 6882 860250

Half brick masonry with non modular fly ash bricks of class designation

11 6.45 10, conformingio IS :12894, in super structure above plinth and upto

11.1 6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 185.016 969.65 179400.76

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and

prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and

similar locations of required size of approved shade, colour and texture laid over 20mm

12 8.2 thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edge to give high gloss finish etc. complete at all levels.

12.1 8.2.2 Granite of any colour and shade

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

13 8.4 and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning Metre 18.36 475.55 8731.1

Extra for providing opening of required size & shape for wash basin/ kitchen sink in

kitchen platform, vanity counter and similar location in marble/ Granite/ stone work,

including necessary holes for pillar taps etc. including moulding, rubbing and polishing of

cut edges etc. complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by

the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

15 11.46 including grouting the joints with white cement and matching pigments etc. The tiles

must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with

the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber

mallet for placing the tiles gently and easily.

15.1 11.41A Double charge vitrified tile polished finish of size

Signature of Contractor with Seal 2 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved

make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20

mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and

matching pigments etc., complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement

mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing

with white cement slurry admixed with pigment of matching shade including rubbing,

curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

17.1 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent Sqm 15 3908.8 58632

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in

skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including

pointing in white cement mixed with pigment of matching shade

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

cement slurry mixed with pigment to match the shade of the slab, including rubbing and

polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Providing and laying 60mm thick faciory made cement concrete interlocking paver block

of M -30 grade made by block making machine with strong vibratory compaction, of

approved size, design & shape, laid in required colour and pattern over and including

50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all

complete as per the direction of Engineer-in-charge.

Structural steel work in single section, fixed with or without connecting

21 10.1 plate, including cutting, hoisting, fixing in position and applying a priming Kg 3000 93.05 279150

coat of approved steel primer all complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed

22 10.2 work, including cutting, hoisting, fixing in position and applying a priming coat of Kg 1500 78.2 117300

approved steel primer all complete

Signature of Contractor with Seal 3 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing

sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions

as per IS code 2676 with characteristics of good formability and corrosion resistance.

The profile sheets shall be fixed to truss members in slope or required pitch or curvature

23 12.65 with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3

mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc.

complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be

paid separately).

0.71mm Aluminium color coated profile with center to center pitch of 175 mm, depth of

24 12.65.3 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of Sqm 25 1706.9 42672.5

1144mm, cover width 1050mm.

Providing and fixing partition upto ceiling height consisting of G.I. frame and required

board, including providing and fixing of frame work made of special section power

pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),

consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50

mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with

dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal

screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other

flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel

25 9.105 and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including

fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener

or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of

boards to both side of frame work by 25 mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to

the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99

mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the

horizontal joints of two boards, fixed to the studs using metal to metal flat head screws,

including jointing and finishing to a flush finish with recommended jointing compound,

jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher

and two coats of primer suitable for board as per manufacture's specification and

direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass

25.1 9.105.1 Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS 317.8272 1797.65 571342.07

certification marks)

26 NS Extra for glass wool for sound acoustic 317.8272 255 81045.94

Signature of Contractor with Seal 4 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Providing and fixing false ceiling at all height including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle

cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm

long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50

mm of required length with nuts & bolts of required size and other end of angle hanger

fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

27 12.45 perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm

centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of dry wall screws of size

3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered

and square edges of the board with recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint

and two coats of primer suitable for board, all as per manufacturer’s specification and

also including the cost of making openings for light fittings, grills, diffusers, cutouts made

with frame of perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the cost of painting

27.1 12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board sqm 100 1300.5 130050

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with

polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet

washers or with G.I. limpet washers filled with white lead, including a coat of approved

steel primer and two coats of approved paint on overlapping of sheets complete (up to

any pitch in horizontal/ vertical or curved surfaces),

excluding the cost of purlins, rafters and trusses and including cutting to size and shape

wherever required.

28.1 12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m² sqm 100 1320.35 132035

Signature of Contractor with Seal 5 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of

approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of

99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire

Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-

Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120

gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size

15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of

29 26.27 length 600 mm to form grid module of size 600x600 mm suspended from ceiling using

galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6

dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-

shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main

‘T’.The system should rest on periphery walls /partitions with the help of GI perimeter wall

angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with

help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws.

The exposed bottom portion of all T-sections used in false ceiling support system shall be

pre-painted with polyester baked paint, for all heights. The work shall be carried out as per

specifications, drawings and as perdirections of the engineer-in-charge.

With 16 mm thick beveled tegular mineral fibre false

ceiling tile (NRC 0.55 to 0.6

30 13.1 12 mm cement plaster on even side of masonery work with mix of :

31 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :

Providing and applying white cement based putty of average thickness 1 mm, of

approved brand and manufacturer, over the plastered wall surface to prepare the

surface even and smooth complete.

33 13.110 Finishing walls with textured exterior paint of required shade :

33.1 13.110.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm. Sqm 958.44 118.85 113910.59

34 13.111 Finishing walls with Acrylic Smooth exterior paint of required shade :

34.1 13.111.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). Sqm 430 74.75 32142.5

Wall painting with plastic emulsion paint of approved brand and

manufacture to give an even shade

35.1 13.98.1 One or more coats on old work Sqm 3833.76 90.85 348297.1

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre of approved brand and

manufacture, including applying additional coats wherever required to achieve even

shade and colour

Signature of Contractor with Seal 6 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of

New work (Two or more coats applied @ 1.43 ltr/10 sqm. over and including base coat

of water proofing cement paint applied @ 2.20 kg/10 sqm).

Painting with synthetic enamel paint of approved brand and manufacture of required

colour to give an even shade :

38.1 13.99.1 One or more coats on old work sqm 400 86.55 34620

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at junctions, i.e. at top,

bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections

39 21.1 shall be smooth, rust free, straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass /

stainless steel screws, all complete as per architectural drawings and the directions of

Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) :

39.1 21.1.1 For fixed portion

39.1.1 21.1.1.2 Powder coated aluminum (minimum thickness of powder coating 50 micron) Kg 500 466.3 233150

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots

and making provision for fixing of fittings wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings shall be paid for separately)

39.2.1 21.1.2.2 Powder coated aluminum (minimum thickness of powder coating 50 micron) Kg 750 564.8 423600

Providing and fixing double glazed hermetically sealed glazing in aluminium windows,

ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air

gap, including providing EPDM gasket, perforated aluminium spacers, desiccants,

sealant (Both primary and secondary sealant) etc. as per specifications, drawings and

direction of Engineer-in-charge complete.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions

etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings

and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid

in basic item):

41.1 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) sqm 50 1325.55 66277.5

Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes

5 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass

panes excluding portion inside rebate shall be measured).

Signature of Contractor with Seal 7 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or

graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in

43 21.2 aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel

screws etc. complete as per architectural drawings and directions of engineerin-charge.

43.1 21.2.2 Pre-laminated particle board with decorative lamination on both sides sqm 15 951.05 14265.75

Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel

screws etc. complete

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer

(having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg

and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing approved brand and manufacture SS 304 grade Mortice lock with D

46 NS handle with key cylinder fixed with SS screws etc. complete in all respects as per each 16 3500 56000

manufacturers' specifications & as directed by Engineer-incharge.

Providing and fixing approved brand and manufacture SS 304 grade Tower bolt 250mm

long with 10mm dia fixed with SS screws etc. complete in all respects as per

manufacturers' specifications & as directed by Engineer-incharge.

Providing and fixing approved brand and manufacture SS 304 grade Door Stopper- door

mounted hanging type fixed with SS screws etc. complete in all respects as per

manufacturers' specifications & as directed by Engineer-incharge

Providing and fixing approved brand and manufacture SS 304 grade door Buffer wall

mounted 22mm dia, 75mm long with Cover fixed with SS screws etc. complete in all

respects as per manufacturers' specifications & as directed

by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade D type 300mm Pull

Handle with 22mm dia fixed with SS screws etc. complete in all respects as per

manufacturers' specifications & as directed by Engineer-incharge

51 NS Supplying and fixing handle of item code no AWH-D1 deluxe handle of Ebco make for each 10 331.551 3315.51

DGU Aluminium window complete in all respects as per direction of EIC

Supplying and fixing of butt hinges for DGU Aluminium window complete in all respects

as per direction of EIC

Signature of Contractor with Seal 8 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Providing and fixing Toilet Cubicle (of following standard dimension which

includes 600 mm door size width) made of heat, bacteria, water, chemical,

scratch, impact and anti bacterial resistant 12 mm thick solid compact laminate panels

Finish of the compact laminate should be raw silk which include doors, pilasters and

intermediate panels finished with approved texture/shade as per the detail drawing and as

per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard. This also

includes providing and fixing in position necessary hardware made out of Stainless Steel

(Grade 304) as per manufacturer's specifications and EIC instructions like (1) Door Knob,

(2) Gravity Hinges, (3) Thumb turn lockset indicators, (4) Coat hooks, (5) U- Channels, (6)

SS Shoe Box Plate, (7) MSBase Plate, (8) Rubber noise deafening tape, (9) Screws and wall

54 NS Providing and fixing blackout roller blind as per direction of EIC Sqm 105.84 3750 396900

Providing and fixing Acoustic Wood based panels with lineal perforations to be fixed on

walls/ ceiling.The panels shall be fire resistant grade with melamine laminate panels

2430mm x 128mm x16mm wirh 2mm slats at 32 mm pitch, Toungue and Groove edges for

seamless mounting having density of 800kg/m3 (base panel confirming to IS 12406 and

lamninated panel confirming to IS 14587) . The back of the panels are perforated with

10mm diameter circular holes with a nonwoven fabric covering of 0.2mm for providing

Sound absorption via the acoustic impedance method.Panel is to be fixed on Anutone

Strut CC18 framework with screw fixed horizontal / vertical to wall at every 600mm c/c

with centre & edge bracket in tongue & groove system on CC18 framework. The cavity of

framework should be inserted with polyster fibre AnutoneSynth AW 10x25 with surface

density of 1000 gsm and alongwith all accessaries and direction of Engineer in charge

Providing and fixing white vitreous china extended wall mounting water closet of size

56 17.78 780x370x690 mm of approved shape including providing & fixing white vitreous china each 12 13036.55 156438.6

cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8

litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of

57 17.80 approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml each 6 7004.45 42026.7

consumption), having water inlet from back side, including fixing to wall with suitable

brackets all as per manufacturers specification and direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of UNDER COUNTER WASH BASIN of model

58 NS number :CNS-WHT-703 (410x505X185) (JAQUAR) or approved equivalent make .(Oval each 12 3367.858 40414.29

Signature of Contractor with Seal 9 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Supply, Installation, Testing & Commissioning of 15 mm nominal bore Pillar Cock long neck

59 NS with aerator of Model Jaquar CON 021 KN or approved make conforming to IS:8931 each 12 1852.322 22227.86

complete with Supporting Accessories etc.

Providing and fixing CP Brass swinging spout cock Jaquar (CON-347KNM) or approved

equivalent make

Providing and fixing CP Brass two way bib cock of approved quality of 15 mm nominal

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved

quality conforming to IS:8931

63 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

63.1 18.21.2 45 cm length

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as

per the direction of Engineer-in-charge.

Providing and fixing C.P. Towel Ring Jaquar (Cat. No. ACN-1121BN) or approved equivalent

66 17.34 Providing and fixing toilet paper holder :

Providing and fixing health faucet with 1 m long flexible tube and wall hook including all

fittings (Jaquar Cat No.ALD 573) or approved equivalent. 2433.457

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I.

68 17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required :

68.1 17.10.1 Kitchen sink with drain board

Providing and fixing urinal partition of Jaquar code JSE-CHR-110UC450X or equivlanet

69 NS with expandable anchor fasteners with C.P. brass bolts and washers complete, including each 12 75440.02

cutting and making good the walls where required. 6286.668

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved

70 17.31 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. each 12 1411.15 16933.8

brass screws and washers complete.

Providing and fixing of Liquid soap dispenser set (Automatic Soap Dispensers Jquar CODE:

SDR-BLC-DJ0160AS or equivalent) 7297.025

72 18.58 Providing and fixing PTMT grating of approved quality and colour.

72.1 18.58.1 Circular type

Providing & Fixing Hand drier of Jaquar of Model No HDR-SAP-M99ACS or equivlanet

approved by Engineer 22789.17

Signature of Contractor with Seal 10 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Supply and installation of approved make Water Cooler inbuilt of RO cum UV having

capacity of 80 Litre as per direction of EIC 112598.7

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, including

75 18.7 fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and testing of joints complete as per direction of Engineer

Internal work - Exposed on wall

75.1 18.7.3 25 mm nominal dia Pipes metre 35 408.55 14299.25

75.2 18.7.4 32 mm nominal dia Pipes metre 30 500.95 15028.5

75.3 18.7.5 40 mm nominal dia Pipes metre 40 674.35 26974

75.4 18.7.6 50 mm nominal dia Pipes metre 50 927 46350

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and the cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

76.1 18.8.1 15 mm nominal dia Pipes metre 30 441.15 13234.5

76.2 18.8.2 20 mm nominal dia Pipes metre 40 513.75 20550

76.3 18.8.3 25 mm nominal dia Pipes metre 50 626.05 31302.5

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS :

12701 marked, with cover and suitable locking arrangement and making necessary holes

for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing fixing, testing and commissioning in position SWR PVC PIPE TYPE-B(6Kg/cm2.)

78 NS self fit pipe comforming to IS:13592 including all fittings such as bends, junctions,

inspection doors, offests, cowl, access pieces/plugs etc. jointing with PVC Adhesive joints

including cutting holes in walls and making good the same.

Providing & fixing PVC Floor Trap OR multi floor trap of 75mm dia diameter,

79 NS with necessary distance piece of 75mm dia pipe and 150x150mm grating, making

necessary SLAB /WALLholes and cutting walls, etc complete

Providing and fixing PVC Pipe ISI marked brand as per IS:4985 (6 kg.) complete with PVC

Fittings & clamps & hinges including cutting and making good the walls & ceiling for waste

pipes, connections & as directed by the

Engineer-in-Charge

Signature of Contractor with Seal 11 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

40mm nominal bore metre 50 132 6600

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating

brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside)

the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per

standard design:

81.1 19.4.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 2 2474.4 4948.8

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed

82 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand)

including testing of joints etc. complete

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand )

with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded

stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar

1:3 (1cement : 3 coarse sand) finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size) finished with a floating coat of neat cement complete as per standard

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light

83.1 19.7.1 duty) 455x610 mm internal dimensions, total weight of cover and frame to be

not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

With common burnt clay F.P.S. (non modular)

bricks of class designation 7.5

Providing and placing in position 100 mm thick factory made machine batched & machine

mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25

grade cement concrete for RCC work, including cost of centering, shuttering,

reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both

84 16.93 ways , neat cement punning on finished surface, properly encased on all edges with 1.6 Sqm 350 2617.15 916002.5

mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be

welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost

of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water

85 14.79 supply line and removing from the terrace including shifting at ground level as per each 1 357.55 357.55

direction of Engineer-in-charge

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including

86 14.81 providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the each 15 243.1 3646.5

same etc. complete as per direction of Engineer-in-charge

Signature of Contractor with Seal 12 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

87 NS Dismantling W.C. Pan/Urinal basin/Wash Basin of all sizes including disposal of dismantled each 15 110.7 1660.5

materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling 15 to 40 mm dia G.I. pipe /CPVCincluding stacking of dismantled pipes (within

88 NS 50 metres lead) as per direction of Engineerin-

(a) Internal Work- Exposed on wall metre 100 2.85 285

Dismantling of any dia of soil and waste including stacking of dismantled pipes (within 50

metres lead) as per direction of Engineerin- Charge.

Demolishing lime concrete manually/ by mechanical means and disposal of material within

50 metres lead as per direction of Engineerin- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable

91 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

92 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

92.1 15.12.1 Of area 3 sq. metres and below each 5 302.7 1513.5

92.2 15.12.2 Of area beyond 3 sq. metres each 10 414.55 4145.5

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of

93 15.52 useful materials near the site and disposal of unserviceable materials within 50 metres each 7 744.6 5212.2

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

94.1 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 100 60.5 6050

95 NS Supplying and fixing of FRP material Security Porta Cabin of Size 4' x 6' as per direction of No 1 63882.5 63882.5

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb

96 19.32 shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per

standard design.

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

97 Signage Works

Signature of Contractor with Seal 13 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Supplying of Glow Sign Board back Lit single sided visual sign. Providing M.S. Box frame

structure of 38mm x 38mm M.S. square pipe with fabrication, welding, grinding, zinc

premium emulsion painting, and with aluminum frame, suitable steel sections such as

stanchions, angles flats along with self expanding cap and screws hold fasts along with

aluminum sheet alloy 500 resins for anti fungal and anti bacterial properties surface

protection for the MS Box structure back side & surrounding of glow sign board. Providing

97.1 NS computerized artwork designing for displaying the content with single sided visual digitally nos 2 44369.36 88738.72

eco solvent print on 3M flex with weather proof lamination and Philips Tube light laser

semiconductor light emitting diodes 20mA to 120mA constant current a high voltage

supply with a very high internal impedance for high brightness applications for GLOW SIGN

BOARD with crystal structure lighting back up structural surface mounting to the backside

of the glow sign board, including electronic Chokes and regulator. Providing Installations

and Assembling of the glow sign board with MS ”poles” of 50mm x 50mm for support of

MS Box frame structure with all required infrastructure and equipments and with all

incidental and operational charges etc., complete for finished item of work. Size

Supplying and fixing of Way finding Sign Board. Providing MS. frame structure of 38mm x

38mm MS Square pipe with fabrication, welding, grinding, zinc premium emulsion painting

along with MS Poles of 2” inches dia MS pipe support with Anchor Fastener Bolts.

Providing Aluminum Composite Panel sheet of 4mm thick with alloy grade 3105 H 14 PVDF

coating and protective film for anti fungal and anti bacterial properties surface protection.

Providing computerized artwork designing for displaying the artwork design of way finding

Sign Boards as per the norms of the NHAI. Providing 3M Translucent Retro reflective

stickers of white colour and Green colour Electro Cut film with Sensitive Adhesive and

97.2 NS Synthetic Liner thickness 0.2mm and Tensile Strength of 0.9 Kg/cm at 23°C and Applied nos 6 24720.07 148320.42

Shrinkage of 0.4mm. ASTM standard E-84 of 3M. Providing computerized cutting to the

approved artwork design on 3M translucent retro reflective stickers with stenciling the

inlay text on Green colour EC film and pasted on ACP sign board with water level

alignment as per the approved drawing with required infrastructure and equipments.

Providing earth work excavation of pit size 1'x1'x2' and providing cement concrete 1:2:4

proportions. All curved areas are free from kinks anchor fastener bolts and fastening

devices are non corrosive materials along with all hardware items and required

infrastructure etc., complete for finished item of work. Size (48" x 36")

Signature of Contractor with Seal 14 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Floor Directory Signage:- Providing and fixing Floor Directory Signage to be made of Acrylic

(6mm Thickness) Plate Laser cutting, Buffing and deco painted, Front side would have 3M

Graphic application, 3M Scotch print decorative graphics on IJ180C (with control tac &

comply feature for direct, bubble-free application on walls) with UV protective matte over

97.3 NS laminate 8520 with a polyethylene-coated paper liner. Customized imagery & the nos 3 6338.48 19015.44

thickness of 2 mil (0.05mm) without adhesive & 3-4mil (0.8-0.10mm) with adhesive,

having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C). the

adhesive should be Pressure activated, positionable, with air release channels and Signage

would be fixed on existing surface with 3M VHB tape, as per approved artwork. size

Providing opaque acrylic sheet Officers Name of approved colours for displaying the

Officers Name Plates content with 4mm thick and 0.40 transparency high tech plastic

material particularly high transparency and impact resistance levels. Providing opaque

acrylic 3D letters of approved colours for displaying Name Plates content with 6mm thick

and 0.40 transparency high tech plastic material particularly high transparency and impact

97.4 NS resistance levels. Providing computerized laser cutting to the existing artwork design on nos 25 4436.94 110923.5

the opaque acrylic sheet along with pasting on Acrylic sheet backdrop. Providing HP Jet

eco solvent print of existing ornamental artwork on Opaque Acrylic sheet with weather

proof lamination. Providing stainless steel studs to the acrylic Name plates for installation

with water level alignment and required hardware items. All anchorage and fastening of

miscellanies metal items shall be structurally adequate and finish to match surface etc.,

complete. For finished item of work. size (18"x12")

Providing opaque acrylic sheet for Toilets of approved colours for displaying the Toilets

content with 4mm thick and 0.40 transparency high tech plastic material particularly high

transparency and impact resistance levels. Providing opaque acrylic 3D letters of approved

colours for displaying Toilets content with 6mm thick and 0.40 transparency high tech

plastic material particularly high transparency and impact resistance levels. Providing

computerized laser cutting to the existing artwork design on the opaque acrylic sheet

along with pasting on Acrylic sheet backdrop. Providing HP Jet eco solvent print of existing

ornamental artwork on Opaque Acrylic sheet with weather proof lamination. Providing

stainless steel studs to the acrylic Name plates for installation with water level alignment

and required hardware items. All anchorage and fastening of miscellanies metal items

shall be structurally adequate and finish to match surface etc., complete. For finished item

of work. size (5"x5")

Signature of Contractor with Seal 15 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Fire Extinguisher :- Signage made up of 5 mm Sun Board base sheet with

photoluminescence film pasted from behind and cut as per letters and designs and with

border etc., 3M Clear Graphics would be apply on the face of Signage Durable inkjet

printed 3M Scotch print graphics on 3650-114 self-adhesive vinyl, special CLEAR film to

produce coloured imagery on glass with 8520 over laminate with a polyethylene-coated

lay flat liner. Customised imagery & the thickness of 2 mil(0.05mm) without adhesive & 3-

4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5.5 pounds/inch at

73°F (0.9 kg/cm at 23°C), the adhesive should be Pressure activated, positionable, with air

release channels complete as per drawings and details and as per specifications fixed on

wall/marble using approved adhesive size (6" X 6")

Subtotal A ( Civil Work) 7722974.05 2493495.19

SUB HEAD-B :- Furniture Work

Supply and fixing Godrej Ascent Desk or equivalent With ERU size shall be 2100 Width mm

1 NS x 1600 Depth mm x 765 Height mm as per referred tech spec/ image/Shape and direction Nos 1 58528.81

of Engineer- In- Charge. 58,529

Supply & Fixing of Executive Godrej HIGH BACK Chair or Equivalent seat/back assembly:

the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber

2 NS nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane Nos 1 26893.87

foam & polyster fabrias per referred tech spec/ image/Shape and direction of Engineer- In-

Charge. 26,894

Supply and Fixing of Godrej Enterprises Table or Equivalent of size 1500 x 750 x 750 mm as

per referred tech spec/ image/Shape and direction of Engineer- In- Charge.

Signature of Contractor with Seal 16 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Wire Management through main spine- Wires shall be taken into the system through cable

ducts from the junction boxes and it is carried upto the panels through concealed conduits

inside the blocks.Legs - Metal powder coated legs at the end and shared condition. System

shall also have 120 mm high powder coated standalone panel legs to give the system an

5 NS elevated look.Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping

edge banding of size 1200 mm w x 600 mm d.Pedestals - Nova pedestal flat metal front,

full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr =

2box+1file. CPU trolley - with castors KBPT with mousetray - metal Note: All partitions and

side panels have levelling screws for adjustment in case of Uneven floor to take care of +/-

40 mm of uneven flooring etc as per referred tech spec/image/Shape and direction of

Engineer- In- Charge

Godrej Xpress Office or Equivalent 1500x1500 Nos 10 50,126 501262.98

Supply & Fixing of medium back Chairs KTS Mech, 4 Position Locking, Adj

6 NS Inbuilt Lumber support & Adj PU Arms with Mesh Back & Nylon Pedestal etc as per Nos 20 422019.98

referred tech spec/image/Shape and direction of Engineer- In- Charge. 21,101

Supply and fixing of Godrej Ace visitor Chair as per referred tech spec/image/Shape and

direction of Engineer- In- Charge. 14,602

8 NS Supply and fixing of per seat Godrej Enlighten Desk cum Bench or equivalent as per per Nos 120 3366198.16

referred tech spec/image/Shape and direction of Engineer- In- Charge. 28,052

Supply and fixing of Unwind Chair with upholstery and desklet as per per referred tech

spec/image/Shape and direction of Engineer- In- Charge. 8,134

Supply and fixing of DOUBLE SIDED STEEL BOOK RACK BASE UNIT, Overall Dimensions of

Double Sided Steel Book Rack Base Unit shall be

900mm(W)x600mm(D)x1850mm(H).as per per referred tech spec/image/Shape and

direction of Engineer- In- Charge. 29,738

Supply and Fixing of Single sided wood & steel book rack base etc as per referred

image/Shape and direction of Engineer- In- Charge. 28,617

Supply and Fixing of Godrej Gain Storage (Size 1000 x 500 x 2025 mm) as per referred

image/Shape and direction of Engineer- In- Charge. 38,358

Supply and Fixing of Tamboor Door Unit ( TDU) (Size 750 x 470 x 1169 mm)

as per referred image/Shape and direction of Engineer- In- Charge. 26,495

Supply & Fixing of Single Seat Sofa with robuststructure and good stability & Ergonomic

Back Support with Soft Touch Fine Finish & Durable Shaneel Fabric in approved colour and

Rich Leatherite etc as per tech Spec/image/Shape and direction of Engineer- In- Charge. 22,556

Signature of Contractor with Seal 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

DSR 2021 Description of Item Rate (Rs) Amount (Rs)

S.No. Unit Quantity

NS Items DSR 2021 NS DSR 2021 NS

Supply & Fixing of Double Seater Sofa with robust structure and good stability &

Ergonomic Back Support with Soft Touch Fine Finish & Durable Shaneel Fabric in approved

colour and Rich Leatherite etc as per referred tech spec/image/Shape and direction of

Engineer- In- Charge. 30,735

Supply & Fixing of Tripple Seater Sofa with robust structure and good stability &

Ergonomic Back Support with Soft Touch Fine Finish & Durable Shaneel Fabric in approved

colour and Rich Leatherite etc as per tech spec/ referred image/Shape and direction of

Engineer- In- Charge. 37,624

Supply & Fixing of center table of size 1120 X 600 X 351 MM with robust S.S. under

17 NS structure and glass top with good stability in approved colour of glass etc as per referred Nos 1 12301.5

tech spec/image/Shape and direction of Engineer- In- Charge. 12,302

Supply & Fixing of side table of size 600 X 600 X 351 MM with robust S.S. under structure

18 NS and glass top with good stability in approved colour of glass etc as per referred tech Nos 1 8174.02

spec/image/Shape and direction of Engineer- In- Charge. 8,174

Supply & Fixing of CONFERENCE TABLE of size 3600 X 1200 X 750 MM with Elegant

19 NS Veneered Top and Aluminium Anodized Legs and PLT Modesty panel with Nos 1 192715.71

wiremanagement and provision for fixing switches inside the access flap on the top etc as

per referred tech spec/ image/Shape and direction of Engineer- In- Charge. 1,92,716

Supply and Fixing of Marvle High Back Chair of Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) as

per referred image/Shape and direction of Engineer- In- Charge. 23,432

Supply and Fixing of Marvle Medium Back Chair of Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D)

as per referred image/Shape and direction of Engineer- In- Charge. 21,869

Subtotal B (Furniture Work) - 6602827.28

Signature of Contractor with Seal 18 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

SH-C ELECTRICAL WORKS:

INTERNAL WIRING

Point wiring in PVC conduit, with modular type switch :-

Wiring for light point/ Fan Point/ Exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed medium class PVC conduit, with modular

1.1 switch, modular plate, suitable GI box and earthling the point with 1.5 sq.mm FRLS PVC insulated

Copper conductor Single Core Cable etc. as Required.

Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :- - -

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable

2 1.12 in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC Insulated Copper Meter 2,500.00 200.00 5,00,000.00 -

Conductor Single Core Cable for Loop Earthing as Required.

Circuit / Sub main wiring in PVC conduit :- - -

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated

3 1.14 copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. - -

Supplying and drawing 2 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,

4 1.18 unarmored telephone cable in the existing surface/ - -

recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

insulated, shielded with fine tinned copper braid and protected with PVC sheath in

the existing surface/ recessed steel/ PVC

conduit as required.

S/F light plug point Modular type accessories :- - -

Supplying and Fixing suitable size GI box with modular plate and cover in Front on Surface or

6 1.31 in Recess, including Providing and Fixing 3 pin 5/6 A Modular Socket outlet and 5/6 A Modular Each 120.00 401.00 48,120.00 -

Switch, Connections etc. as Required.

S/F power plug point modular type accessories :- - -

Supplying and fixing suitable size GI box with modular plate and cover in Front on Surface or in

7 1.32 Recess, Including Providing and Fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 Each 46.00 495.00 22,770.00 -

A Modular Switch, connections etc. as Required.

Signature of Contractor with Seal Page 1 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth,

metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface

8 2.18 or in recess, with chained metal cover for the socket out let and Complete with Connections, Each 30.00 1,232.00 36,960.00 -

Testing and Commissioning etc. as Required.

Supplying and fixing following modular switch/ socket on the existing modular plate &

9 1.24 switch box including connections but excluding modular - -

plate etc. as required.

a 1.24.6 Telephone Socket Outlet Each 15.00 119.00 1,785.00 -

b 1.24.7 TV anteena Socket Outlet Each 5.00 119.00 595.00 -

e 1.24.4 3 pin 5/6 amp socket outlet Each 191.00 111.00 21,201.00 -

f 1.24.5 6 pin 15/16 amp socket outlet Each 20.00 175.00 3,500.00 -

Supplying and fixing following size/ modules, GI box alongwith modular base & cover

plate for modular switches in recess etc as required.

a 1.27.1 1 or 2 Module (75mmX75mm) - For Telephone & TV outlet. Each 20.00 243.00 4,860.00 -

b 1.27.2 3 Module (100mmX75mm) - For Socket outlet. Each 20.00 267.00 5,340.00 -

c 1.27.5 8 Module (125mmX125mm) - For Socket outlet + 16A switch Each 79.00 383.00 30,257.00 -

Supplying and fixing brass batten/ angle holder including connection etc. as

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts,

complete as required.

Supplying and fixing modular blanking plate on the existing modular plate &

switch box excluding modular plate as required.

DISTRIBUTION BOARDS & MCB's - -

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable

2.1 for inductive load of following poles in the existing MCB DB complete with connections, testing and - -

commissioning etc. as required.

Supplying and Fixing Single Pole Blanking plate in the Existing MCB DB

complete etc. as required.

Supplying and Fixing Following Way, Horizontal Type Three pole and Neutral, Sheet Steel, MCB

Distribution Board, 415 V, on Surface/Recess, Complete With Tinned Copper Bus Bar, Neutral Bus

16 Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing etc. as Required. (But

Without MCB/RCCB/ Isolator)

Supplying and Fixing Following Way, Single Pole and Neutral, Sheet Steel, MCB Distribution

Board, 240 V, on Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar,

17 Earth Bar, Din Bar, Interconnections, powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

S/F DP MCB Isolator - -

Signature of Contractor with Seal Page 2 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

Supplying and Fixing Following Rating, Double pole, 240 V, isolator in the Existing MCB DB Complete

18 with Connections, Testing and Commissioning etc. as required.

S/F 4P MCB Isolator - -

Supplying and Fixing Following Rating, Four Pole, 415 V, Isolator in the Existing MCB DB complete

with connections, testing and commissioning etc. as required.

S/F DP (RCCB) - -

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current

2.14 circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with - -

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current

circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB

complete with connections, testing

and commissioning etc. as required

INTERNAL LIGHTING FIXTURES & FANS - -

22 NS Supply of Surface Mounted 40W LED DOWN LIGHT (Round) Each 36.00 1,120.00 - 40,320.00

SUPPLY OF BATTEN 40W LED LIGHT FIXTURE Surface Mounted Type 1200mm Long with electronic

driver, pre-wired upto main connections complete as Required

24 SUPPLY of 9W MIRROR LIGHT FIXTURE Each 8.00 600.00 - 4,800.00

25 NS SUPPLY of 15W BRACKET LIGHT FIXTURE Each 9.00 1,640.00 - 14,760.00

SUPPLY FANS & EXHAUST FANS - -

Supply of AC 230/250 Volts, 50 HZ Ceiling Fan With Standard Down Rod, Blades, 2 Nos. Caps etc.

26 NS ISI Marked Complete as Required.

Supply of AC 230/250 volts, 50 HZ Exhaust Fans Including Providing Nuts, Bolts, Mounting

27 NS Frame and Other Accessories etc. Complete

ERECTION OF LIGHTING FIXTURES AND FANS - -

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent

fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall,

including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable

and earthing etc. as Required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of

standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single

core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as

Installation of Exhaust Fan in the Existing Opening, including Making Good the Damage,

1.50 Connection, Testing, Commissioning etc. as Required. - -

Signature of Contractor with Seal Page 3 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

S/F modular type electronic fan regulator: - -

31 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch

box including connections but excluding modular plate etc. as required.

UNINTERRUPTED POWER SUPPLY (UPS) - -

Supply installation testing and Commissioning of 15KVA online True online double conversion,Three

Phase Input/Three Phase Output. with SMF Batteries suitable for 30 Mint backup. Capacity

15kVA/13.5kW,Input voltage range 340-480V Input powerfactor More Than 0.99 input THDi Less

than 3% output voltage 3x380/400/415VAC+Neutral static regulation+/-1% output wave form

sinusidal.Output THDu Less than 1% for linear load Less than 3% for nonlinear load Crestfactor 3:1

32 NS overload 110% for 60min 125% for 10min 150% for 1min battery voltage 480VDC battery charging Set 1.00 3,50,000.00 - 3,50,000.00

Advanced Battery Management Battery bank sizing overall efficiency Atleast 94% in UPS Mode

parallel techlonogyUpto four units can be connected in parallel communication port

RS232/USB/EPO.EMC–IEC62040-2saftey–IEC62040-1-1 operating temperature 0 – 40 deg C relative

humidity 95% Non condensing.

DG SET & ACCESSORIES - -

33 NS 125 KVA DG SET - -

Design, Manufacture, Supply at site of 125 KVA Radiator Cooled, Silent DG Set Comprising of

Standard BHP Diesel Engine @ 1500 rpm & 125 KVA Alternator rated at 3-phase, 415 Volts, 50Hz; 0.8

pf, Both Mounted and Aligned on a Common MS base Frame Complete with MS Fuel Tank, Generator

Control Panel, Standard AMF Panel, Residential Exhaust Silencer, AVM Pads fitted on base frame, - -

Minimum 2 nos. 12 Volts, 100 AH Battery, Battery Leads, 1st fill of lube oil, all housed in Sound Proof

Acoustic Enclosure complete as required :-

Diesel Engine - -

CPCB-2 Norms compliant, 4-Cycle, Radiator Cooled, Standard BHP Diesel Engine @ 1500 RPM,

Turbocharged and Low Temperature Aftercooled complete with following as required:

Flywheel with Starter Ring for Generating Set. - -

Dry type air filter - -

Lube oil cooler Assembly with accessories - -

Exhaust air manifold - -

Exhaust Silencer - -

Expansion bellow. - -

Exhaust gas turbocharger - -

Fuel filters (pre and macro). - -

Lube oil filter (Spin On type). - -

Radiator With Pusher Type Fan, With Fan Guard, Coolant Pump - -

24V Electrical Starting System with Starter Motor and Battery Charging Alternator - -

In-line Monoblock Fuel Injection Pump with Governor and Fuel Feed Pump. - -

Signature of Contractor with Seal Page 4 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

12 cylinders, Vertical or In-Line Shape - -

Front & Rear engine mounting supports. - -

Engine control panel consisting of OFF/ON/START keys, Lube Oil Pressure Gauge, Ammeter,

Electronic Hour Meter, Coolant Temperature Gauge.

Safeties against Low Lube Oil Pressure & High Coolant Temperature. - -

Engine Operation/Maintenance & Spare parts Manual - -

Loading permitted 110% for 1 hr once in every 12 hrs. - -

Engine Warranty Certificate. - -

Engine test certificate. - -

Alternator - -

125 KVA, 415 Volts, 3 Phase, 0.8 p.f. (lag), 1500 RPM, in accordance with IS 4722 & as per following

specifications:

Type: Silent pole, brush less type, suitable for direct coupling to engine. - -

Voltage Regulation: Provided with fast response thyristor type electronic automatic voltage

regulator, which holds output voltage within desired limits. (+/- 1%)

Overspeed capability – 150% for 30 seconds - -

Excitation: Brushless type, self excited, self regulated. - -

Alternator Loading: Suitable for taking rated load immediately after machine reaches rated voltage

Vibration: Suitable for direct coupling with Engine and mounted on common M.S. Channel base

Enclosure: Screen protected drip proof enclosure with IP - 23 degree of protection. - -

Cooling: Air cooled type with radial fan mounted on Rotor. - -

Winding Insulation: Class 'H'. - -

Essential Accessories - -

One set of essential accessories shall be supplied with each DG set. This set of accessories shall

comprise of the following:

One No. MS Base Frame suitable for mounting of the offered engine and alternator. - -

One No. Day fuel tank of 990 litres capacity complete with fuel gauge, inlet/outlet connections, drain

24 V DC starting system comprising of starter motors, voltage regulator and arrangement of initial

excitation complete with 2 nos. 12 V each lead acid type batteries as per OEM standard as required. - -

Supply of miscellaneous structural support (2500kg) for horizontal & vertical exhaust piping in the

open including fabrication, hardwares and painting shall be including in DG set cost. - -

1 Set of AVM Pads fitted on Base Frame. - -

AMF PANEL - -

Signature of Contractor with Seal Page 5 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

SITC of Automatic Mains Failure Control Including Auto by-Pass Panel, suitable for 125 KVA Silent

Type DG set Complete with Relays, Timers, Set of CTs for Metering & Protection and Energy Analyser

to indicate Currents, Phase and line Voltages, Frequency, Powerfactor, KWH,KVARH & Provision for

overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to

diesel engine and elsewhere if required all complete and Interlocking Including the Following

02 nos 250 amp. 4pole manual draw out motorised electrically operated draw ot with cradle type 3

position ACB with electomagnatic electronic release for C/C & E/F and shunt trip. - -

Auto/Manual/test off selector switch - -

2 nos over voltage relay, 2 nos reverse power relay and 2 nos under voltage relay - -

3sets of current transformers 15P 10 accuracy for protection and 15 VA class- I for metering

energy analyser unit to indicate current voltage frequency power factor and KWH - -

Indiacating lamps for load and mains and load on set - -

Fuse for Instruments - -

Battery, charger, complete with transformer/ rectifier, D.C voltmeter and ammeter, selector switch

for trickle off and boost and current adjustment

Main supply failure monitor - -

Supply failure timer - -

Restoration Timing - -

Control unit with Three Impulse Automatic Engine Start/ Stop and Failure to Start lockout - -

impulse counter with locking and rest facility - -

On/OFF/Control circuit switch with indicator - -

Audio/Video annunciation for - -

High Water Temperature - -

Low Lubricating oil pressure - -

Engine over speed - -

Engine fails to start - -

Full load/maximum load warning - -

Specifications Of Sound Proof Enclosure - -

Construction : - -

The container should be designed for easy access to serviceable parts. - -

Modular construction for easy assembling and dismantling. - -

Fabricated out of CRCA sheet of 14SWG. Base frame should be made out of ISMC of suitable sections

or made out of sheet steel of minimum thickness 4 mm.

The hardware should be high tensile grade i.e. bolts of 10.9/8.8 grade. Hardware should be of SS or

Electro ZN plated.

Fuel Tank should be fitted in the base frame having capacity of min. 900 ltrs, fitted with breather and

all other necessary assemblies.

The fuel level measurable through a mechanical fuel gauge. - -

There should be provision for filling the fuel from inside the enclosure - -

In case of integral Fuel tank, connected to engine with flexible fuel pipes. - -

Signature of Contractor with Seal Page 6 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

Batteries should be accommodated in a separate tray in the container. - -

There should be provision for drain plugs for draining mobile oil/ diesel. - -

The doors should be gasketed with high quality EPDM gaskets to avoid leakage of sound. - -

The door handles should be lockable type. - -

Painting : - -

The sheet metal components should be hot dip seven tanks process. - -

To have long life of container it should be P.P. based powder coated (inside as well outside)

Base frame should be epoxy coated when fabricated. - -

Acoustic Insulation: - -

Sound proofing of enclosure should be done with quality rock wool/mineral wool confirming to IS-

8183 of 64/96 Kg/m3 density.

The rock wool/ Glass wool should be further covered with fiber glass cloth/fiber tissue paper fire

resistive and perforated powder coated sheet of 0.6mm thickness.

Hospital silencer should be provided to control exhaust noise. - -

Interconnection between silencer and engine should be through stainless steel flexible hose/ pipe.

Attenuators should be provided to control sound at air entry to the container and exit from the

Ventilation & Air Circulation : - -

The system should be designed to provide air inlet/exhaust acoustic louvers for efficient air

circulation and having following special features :

Adequate ventilation should be provided to meet air requirement for combustion and heat removal.

The temperature inside the enclosure limited to 5-7°C over and above ambient temperature near air

Provision for Neutral/ Body Earthing: - -

Points should be available at side of the enclosure with the help of flexible copper wires from

alternator neutral, and electrical panel body respectively. The Neutral earthing point should be - -

isolated through DMC insulator mounted on enclosure.

Engine Panel should be mounted in the container itself. All parameters should be visible from outside

and all operation buttons shall be accessible easily.

DG Set Complete as above and as required Each 1.00 12,40,000.00 - 12,40,000.00

Exhaust Piping - -

Supply and Fixing of Exhaust Pipe of 200 mm NB MS Black Pipe Thickness Not

less Than 4.85 mm Including connection with Residential Type Silencer with

necessary flexible pipes, supports, complete with supply and fixing and

34 NS flanges, clamp, supports, nuts, bolts, bends, asbestos gaskets etc as required. Mtrs. 25.00 5,266.93 - 1,31,673.25

Thermal insulation with mineral wool 50 mm thick on the exhaust piping

system complete with aluminium foil ( 24 SWG ) covering on the top of

insulation of the MS pipe from the engine manifold after the flexible coupling

with all accessories.

35 NS LT Cum DG PANEL - -

Signature of Contractor with Seal Page 7 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

NOTE:- MCCB's wherever specified shall have rotary handle. - -

Suppy , Installation, Testing, Design, Manufacture, Supply Inspection, Handling, Assembling, Affecting

Proper Connections, Testing and Commissioning of 2mm CRCA Sheet Steel Fabricated Cubical Type

Main L.T. Panel with Floor Mounting, dust & vermin proof, Front Operated Construction, Enclosure

Class - IP 52, As per IEC61439-1/2 Tested Assembly powder coated after proper treatment with 9

tank process with top/bottom removable gland plates, as required, double compression type cable - -

glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all

inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. Panel Should be

Ethernet ready connected panel and shall have BMS Compatibility

MCCB shall be Ics = 100% Icu, with rotary handle & pad locking arrangement, with adjustable O/L &

S/C trip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral - -

The Breaking Capacity Specified for all MCCB's breakers is Ics value (service Rating). - -

Energy Analyser / MFM shall be available in incomers only and shall have ethernet port for BMS

Each Incoming (ACB/MCCB) shall have ON/OFF/Trip/S/C And E/F LED indication on panel Front door.

The incoming MCCB shall be Microprocessor based with inbuilt O/L & S/C release with E/F protection

and all Outgoings MCCB's shall be thermal-magnetic based with inbuilt O/L & S/C release. - -

Manufacturer should provide the Discrimination coordination study upto the bus fault level for all

GA drawings shall be got approved from Owners / Architects / Consultants before fabrication. The

panel has to be specifically fabricated as per the space available at Site. The Existing Column Positions - -

Will also be Considered.

Incoming From TRANSFORMER FEEDING PANEL - 1 NOS. - -

Incomer : 1 Nos 200 Ams MCCB - -

TheMCCB shall be electrically interlocked with the bus coupler, DG incomers and other transformer

incomers shall have communication enabled

Protection Releases With LSIG protection Metering & Accessories for each Transformer incomers

Auto manual selector switch. - -

1 set of 3 CT's of ratio 200/5A, Class 1.0 accuracy 15 VA burden for metering. - -

Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6436 of Schneider or

equi.) with Meter needs to comply fo the latest accuracy standards (IEC 62053-24) standards and - -

new power quality standards (IEC 62586, PQI-S)

3 Nos. LED type phase indicating lamps, each lamp shall be with bakup MCB along with hooter,

auxillary relay, 2 sets of push buttons.

7 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit

healthy / DC supply healthy/Overcurrent/Earthfault. Each lamp shall be with bakup MCB. - -

INCOMER FROM DG SET (125 KVA) 1NOS. - -

Signature of Contractor with Seal Page 8 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

INCOMER : 1 Nos 250 Amp MCCB - -

Protection releases with LSIG and Over voltage ,under voltage,Reverse power protection & Metering

& Accessories for each D G set incomers

Auto / manual / test selector switch - -

1 set - 3 CTs of ratio : 400/5A , Class 1.0 accuracy 15 VA each burden for metering. - -

Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6436 of Schneider or

equi.) with Meter needs to comply fo the latest accuracy standards (IEC 62053-24) standards and - -

new power quality standards (IEC 62586, PQI-S)

3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC fuse/MCB along with

hooter, auxillary relay, 2 sets of push buttons.

7 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit

healthy / DC supply healthy/Overcurrent/Earthfault. Each lamp shall be with bakup MCB. - -

9 Window Annunciator with Accept / Reset / Test Push Button for DG Set for Following Indications

and alarm : set fail to start, engine over heat, high temperature, excitation failure, low lube oil

Pressure, over Speed, low Fuel Oil Level, Cooling Water Flow Failure, Breaker Trip, Generator fault,

DC Control Supply Failure, Out of Limit Voltages and spares.

Push buttons for Test. Accept. Reset. Fault Reset. Engine start, Engine stop, ACB close, ACB Trip

Emergency stop.

Shut down due to low lube oil pressure/High water temp/Over speed/Low fuel level - set of 4

indication lamps.

D G control incorporating engine start / stop indicating three attempt facility and on failure to start,

engine lock out.

1 nos battery charger with DC voltmeter and ammeter suitable for the DG sets (125 KVA) - -

Note : In normal case all three lamps shall be ON to indicate that incoming power supply is available.

In case of power resumption after failure buzzer shall ring to indicate the power supply is resumed. - -

There shall be one push button to acknowledge the same.

The MCCB shall be electrically interlocked with the bus coupler and Transformer incomers. - -

INTERLOCKING - -

Interlocking logic electrical Interlocking between incomers and bus coupler and it should have auto

start and auto trip facility for Automatic Operation of the Breakers WITH MANUAL OVER RID FACILITY - -

BUS COUPLER : 1 NO 250 AMP FP MCCB (50 KA) - -

Trip circuit supervision relay - -

TNC switch. - -

Auto / manual selector switch - -

5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit

healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB.

The bus coupler shall be electrically interlocked with all incoming of Transformer - -

Signature of Contractor with Seal Page 9 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

TPN aluminium bus bars of minimum 300 Amp with heat shrinkable coloured sleeves , Shrouds at

Joints and including DMC/SMC bus bars supports at required interval complete for cross section, side

supports and their spacing etc. for withstanding fault level of 31 MVA for 1 sec

OUT GOING - -

R,Y,B phase indication lamps (110V) LED Type - -

Shall be provided with ON/OFF Trip Indication LED TYPE - -

1 No Ameter Digital Type - -

8 Nos. 63 A 4P MCB 10 KA (Power & Lighting each floor + Spare) - -

1 Nos. 40A DP MCB 10 KA (Spare) - -

2 Nos. 100A 4P MCCB 25 KA (FOR UPS) - -

Complete Panel as Above and complete Set 1.00 5,20,000.00 - 5,20,000.00

36 NS MCCB BOX ( For UPS I/P) - -

Supply, installation, testing & commissioning of MCCB in Sheet Steel

enclosure made out of 2 mm thick CRCA sheet suitable for 3 phase 4 wire

50Hz AC system complete with four pole Moulded Case Circuit Breaker - -

(ICS = 35KA) suitabel for incoming & outgoing termination including power

coating etc. complete as per specification & as required.

37 NS UPS PANEL - -

1 Nos 63 Amp TP+2N Moulded Case Circuit Breaker - -

1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch. - -

1 No.150 Amp digital ammeter with inbuilt selector switch and CT's. - -

1 Set of phase indicating lamps with Single Pole MCB. - -

1 Set of ON / OFF indicating lamps with Single Pole MCB. - -

1 Set of Electronic KWH Meter. - -

100 Amp TP+2N aluminium busbar. - -

03 No. 25 Amp TPN Miniature Circuit Breaker - -

02 No. 32 Amp TPN Miniature Circuit Breaker - -

02 No. 25 Amp DP Miniature Circuit Breaker - -

Complete Panel as Above and complete Set 1.00 39,000.00 - 39,000.00

LT CABLE AND ACCESSORIES - -

SUPPLY OF L.T. CABLE: - -

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Insulated

38 armoured cable conforming to IS:7098 (Part - I) complete with all Amendments etc. as Required - -

38.b NS 4 C X 16 Sq.mm Al. XLPE arm. Meter 50.00 181.61 - 9,080.50

Signature of Contractor with Seal Page 10 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

Supply & Laying of following sizes of 1.1KV grade multistranded copper conductor PVC

insulated cable including termination complete as required in existing cable tray.

39.a NS 4C 16 Sq.mm PVC Insulated cu wire including termination Meters 1,021.00 769.00 - 7,85,149.00

39.b NS 4C 10 Sq.mm PVC Insulated cu wire including termination Meters 250.00 507.00 - 1,26,750.00

LT CABLE LAYING - -

Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of

40 7.1 Following Size Direct in Ground Including Excavation, Sand Cushioning, Protective Covering - -

and Refilling the Trench etc. as required.

7.1.3 Above 95 sq. mm and upto 185 sq. mm Meter 200.00 352.00 70,400.00 -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power

cable of 1.1 KV grade of following size on wall surface as required.

7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Meter 1,350.00 39.00 52,650.00 -

Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs

42 9.1 for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of - -

1.1 kV Grade as Required.

CABLE TRAY - -

Supplying and installing following size of perforated painted with powder coating M.S. cable

trays with perforation not more than 17.5%, in convenient sections, joined with connectors,

suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders

etc. as required. (Cable Tray Bends as per Requirement)

a 4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Meter 100.00 531.00 53,100.00 -

b 4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Meter 50.00 621.00 31,050.00 -

MISCELLANEOUS ITEMS - -

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of

mild steel, at least 2 mm thick, and vitreous enameled white on both sides,

and with inscription in single red colour on front side as required.

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of

mild steel, at least 2 mm thick, and vitreous enameled white on both sides,

and with inscription in single Red colour on front side as required.

SITC of shock treatment chart (prescribed under I.E.rules) duly framed with

glass and supported from back with hard board with supply of all material

labour T & P etc for proper completion of work. (Approx front area = 1.20 sq M)

SITC of First aid box as approved by Indian red cross conforming to IS : 2217.

SITC of Fire Bucket stand made of M S angle suitable for and with 4 Nos Fire

Buckets of 9.5 Ltrs capacity

Signature of Contractor with Seal Page 11 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

Supplying and fixing cable route marker with 10 cm X 10 cm X 5

mm thick G.I. plate with inscription there on, bolted /welded to

35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the

same in ground as required.

SITC of ANTI SKID RUBBER MAT 1 mtr x 2 mtr. 3mm thick ISI - 15652 marked

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing

52 5.4 masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long Set 4.00 6,216.00 24,864.00 -

etc. with charcoal/ coke and salt as required.. (BODY EARTHING)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7

meter long etc. with charcoal/ coke and salt as required.. (NEUTRAL EARTHING)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as

SITC of 7.5 HP 3 phase submersible pump with dol starter etc. complete with all accessories

including Earthing.. Nos.

Supply and laying of 4 Sq mm - 3 core pvc insulated copper flexible cable with suitable glanding and

termination included Metre

SH-D LAN ,VOICE,CCTV AND OTHER LV SYSTEMS

Supplying & Fixing of 8P8C connector, Category-6 information outlet for termination of Catergory-6

balanced twisted pair cable , Shall have RJ-45 type connector with bend limiting and strain relief boot

and capable of 200 termination cycles. Should meet all the performance standards for meeting the

Category 6 Transmission speeds as per ISO 11801 & TIA/EIA

Supplying & Fixing of Connecting Hardware towards the field side, Faceplate shall have provision for

1 or 2 nos of CAT-6 Connectors, to be with dimension which could be fixed on to modular office

furniture for additional protection from dust ingress, the faceplates shall have spring shuttered front

60 N.S. access, the supply Shall be with suitable Gang/back Box to be used other locations which are other Nos 123.00 214.07 26,330.61

than modular furniture locations of the same size by System Integrator complete in all respect.

Signature of Contractor with Seal Page 12 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

Supplying & Fixing of "Loaded" Patch Panel with 24 nos UTP information outlets included of Category-

6, Shall have integrated support bar placed behind with a mechanism for grounding, Shall be loaded

with individually replaceable 24 nos. could be having a 6 port module construction for better cable

dressing at the rear, the jacks shall have RJ-45 type connector with bend limiting and strain relief

boot for securing IDC contacts

Approved Make: COMMSCOPE/ PANDUIT/ORTRONICS

Supplying of 4-pair Unshielded Twisted Pair with a cross filler (+), meeting Category 6 standards as

per TIA-568C.2, the cable to be tested for 250MHz or better for transmission and the jacket to be of

Low Smoke & Zero Halogen construction.

Supplying & Fixing of Category 6, UTP patch cords shall be constructed of 24-27 AWG unshielded

twisted pair stranded copper cable with an enhanced performance modular plug at each end. Patch

cord cable shall be offered in multiple coloured UTP cable for design flexibility with a clear strain

63 N.S. relief boot on each modular plug. All patch cords shall be compatible with both T568A and T568B Nos 106.00 274.28 29,073.39

wiring schemes. UTP Cable will be 1.0 mtr. complete in all respect. Jacket - LSZH

Supplying, of 30 Pair anealed tinned copper conductor PVC insulated and sheathed armoured copper

telephone cables with suitable clamps, saddles and including making terminal joints complete as

Supplying, Installa on, Tes ng & Commissioning of of 30 Port telephone Patch Panel Approved.

Supply, Installation, Testing & Commissioning of 24 10/100/1000BASE-T

POE+, 4 1GbE unpopulated SFP upgradable to 10GbE SFP+ (2 combo/2

66 N.S. non-combo), 2 1GbE copper combo upgradable to 10GbE, 1 Fixed AC Nos 3.00 87768.71 2,63,306.13

PSU, 1 RPS port, with license etc completed as directed by Engineer In-charge

Supplying Installation testing and Commissioning of Small Form Factor Pluggable 1 Gigabit Ethernet

(SFP+) SR Optics

12u rack with 600mmX600mm ( WXD) with all Standard Accessories

Signature of Contractor with Seal Page 13 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

Supplying & Fixing of Floor Standing Network Rack - 22U / 600w / 800d, with Heavy Duty Extruded

Aluminium Frame for rigidity. Top cover with FHU provision. Top & Bottom cover with cable entry

gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs.

With a Overall Weight Carrying Capacity of 500Kgs. Side Panels - 22U/800d Front MS Door perforated

honeycomb 22U/600w Rear MS Door (Fully Perforated - Mesh) 22U/600w Fan 90CFM 230V AC, 4”

dia Castors with Brake (set of 4) Cable manager 1U MS with Loops Shelf, Stationery 475mm N/W PDU

7Sockets 5Amps with MCB Mounting Hardware (Pkt. Of 20) Vertical Cable Channel 50mmW 22U

complete in all respect.

Supply Installation, Testing and Commissioning of Server Based EPABX Fully Computerized IP System,

SIP Compliant. 4U Rack Mountable, Expandable upto 1000Ports.and configured as for below Ports

P & T(CO Trunk) Line 16 Nos.

PRI(30 Channel) 1 Nos.

70 N.S. Digital Extension Circuit 32 Nos Lot 1.00 4,68,278.18 4,68,278.18

Analog Extension Circuit 148 Nos

SIP Trunking 48 Nos.

Supply Installation Testing and Commissioning of IP Digital Phone (24Key+ DSS Console) Backlit

keypad Hands-free, full duplex ,Headset support Easy to use soft keys/LCD prompts, Directory

71 N.S. dialling, Navigation wheel, Call history, Backlit LCD screen, Bluetooth support (BCAZ),Security lock key Each 1.00 26,758.75 26,758.75

XML open interface .

Supply Installation Testing and Commissioning of 24Key Digital Phone Backlit keypad Hands-free, full

duplex ,Headset support Easy to use soft keys/LCD prompts, Directory dialling, Navigation wheel, Call

72 N.S. history,Backlit LCD screen,Bluetooth support (BCAZ),Security lock key XML open interface . Each 2.00 22,075.97 44,151.94

Supply Installation, Testing and Commissioning of Analog Speaker Phone with backlight.

Approved Make: PANASONIC/ NEC/BEETEL

VIDEO SURVEILLANCE SYSTEM(IP CCTV) -

Signature of Contractor with Seal Page 14 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

Supplying, installation, testing and commissioning of Network Dome Camera 2 Megapixel 1/4”

CMOS Sensor in High Resolution H.264/MJPEG Dual Codec & Streaming simultaneously 720P Real-

Time recording Intelligent Video capabilities Superior processor and memory to render high-quality

images Fixed Lens 2.8mm F2.0 UXGA (1600x1200@15fps) / WXGA (1280x720@30fps) 3-axis

Mechanical Design Digital-WDR 3D Noise Reduction 20 meter IR LED DC12V&PoE Power Over

Ethernet IEEE802.3af,IPv4, HTTP, UDP, TCP, ICMP, IGMP, ARP,DHCP, NTP, SMTP, FTP, SAMBA, UPnP,

PPPoE, DNS, DDNS, RTSP,TCP,ONVIF,RTSP/RTP/UDP,RTSP/RTP/TCP,RTSP/RTP/HTTP tunneling, LAN

Multicast, Multipart-JPEG,ONVIF compatible .

Supply, installation, testing and commissioning of 2 megapixels resolution Network Bullet camera

camera,Imager 1/2.8”SONY 2.43 mega low illumination CMOS,Video Compression.

.H.264/MJPEG,Day/Night .Mechanical ICR,Minimum Illumination-0Lux/F1.4(IR ON) IR Illumination-

30M,,Electronic Shutter-Auto/Manual(1/25~1/10000) Lens 2.8 – 12 mm varifocal lens,Resolution

Main-stream:D1/Q1080P(960*540)/HD720P/ HD1080P 1-25/30fps,Digital Noise Reduction-3D,Wide

Dynamic Range-Digital WDR Motion Detection -4 Zones, Multi- Level Sensitivity,Privacy Zones-4

Zones,Snapshoot-Support JPEG format,Password Protection-Support,Character Display-

Support(Channel /Date).Regulatory Emissions-FCC Part 15 CE: EN55022,Immunity -CE: EN50130-4,IP

Ra ng- IP66 rated enclosure to protect against dust and water damage ONVIF compliant

Supplying Installation of 24 Channel Network Video Recorder , Live view/Resolution

5MP/3MP/1080p/720p,Motion Detection Control Privacy Mask Control. USB interface-1 × USB 2.0

and 1 × USB 3.0,Security-HTTPS, SSL, Watermark, User Authentication, Miscellaneous-N+1 hot spare.

Alarm in/out -4 / 1,Network interface-1 RJ-45 10 /100 /1000 Mbps self-adaptive

Ethernet interface, Security-HTTPS, SSL,Video/Audio output-VAG,HDMI and Audio. Watermark, User

Authentication, Incoming bandwidth-100Mbps,Outgoing bandwidth-80Mbps,HDMI output,VGA

Output,Protocol-IPv4, IPv6, TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP,

NFS, and iSCSI are supported.TCP, UDP and RTP for unicast, UPnPTM, ONVIF, PSIA,Support 16 IP

Camera, 2 SATA interfaces for 2 HDDs Upto 4TB for each disk.

Supply, installation, testing and commissioning of Enterprise Class 4TB HDD.

Supply, installation, testing and commissioning of Video Management System (VMS) software .

Signature of Contractor with Seal Page 15 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

Supply, Installation, Testing & Commissioning of minimum L2 specifications and to be manageable 24

10/100/1000BASE-T ,POE+, 4 1GbE unpopulated SFP upgradable to 10GbE SFP+ (2 combo/2 non-

combo), 2 1GbE copper combo upgradable to 10GbE, 1 Fixed AC

PSU, 1 RPS port, with license etc completed as directed by Engineer In-charge

Supply, installation, testing & commissioning of Client Workstation having Intel Core i5 original

motherboard, 16 GB RAM, Video graphics card 2 GB Licensed Windows 8 Professional (64 bit) and 1

Supplying, Installation, Testing & Commissioning of 43 " LED Full HD TV Resolution: Full HD

(1920x1080) | Refresh Rate: 50 hertz

Connectivity: 3 HDMI ports to connect set top box, Blu Ray players, gaming console | 2 USB ports to

connect hard drives and other USB devices

81 N.S. Sound : 20 Watts Output | Wireless sound (2 way Bluetooth) Each 1.00 46,827.82 46,827.82

Smart TV Features : AI ThinQ | Magic remote |One touch access to Netflix and Prime | Miracast

(screen sharing) | AI launcher

Display : Active HDR | HDR dynamic tone mapping | DTS virtual: X

AUDIO VISUAL SYSTEM IN CLASS ROOM -

Supply, Installation, Testing & Commissioning of 6000 ANSI Lumens Projector, WUXGA resolution

(1920 x 1200); Full HD 1080p support., native 16:10 aspect ratio, Laser Light source.

82 N.S. EPSON EB-L630U or equivalent Each 4.00 2,54,208.15 10,16,832.62

Supply, Installation, Testing & Commissioning of Motorised 120" 16:10 aspect ratio Projection Screen

with Remote Control.

Liberty Grand View or Equivalent

Supply, Installation, Testing & Commissioning of Ceiling Mount Projector stand.

Logic Custom or Equivalent

Supply, Installation, Testing & Commissioning of 2–way powered speaker for indoor wall mounting, it

should have built−in amplifier and outputs a speaker signal to the passive speaker. Minimum 2x20W

RMS Power output, Volume, bass and treble CONTROLS button, Line input and Speaker output.

85 N.S. Should be supplied with required length Audio cable, Speaker cable, Connectors & Moning Kit Nos 4.00 2,529.77 10,119.09

Approved Make: Kramer Tavor 6-o or equivalent

Supply & Laying of 1.5 sq.mm. multistrand PVC sheathed Two Core Twin Twisted Speaker Cable in

Exiting PVC Conduit

Signature of Contractor with Seal Page 16 of 17 NBCC

Renovation Maintenance Works of IIFT Temporary Campus at Kakinada, AP

Rate (Rs) Amount (Rs)

S. No. Description of Items Unit

2018/NS DSR -2018 NS DSR-2018 NS

Supply, Installation, Testing & Commissioning of 15Mtr HDMI cable support minimum resolution of

VIDEO CONFERANCING SYSTEM IN BOARD ROOM -

Supply, Installation, Testing & Commissioning of all in one Video bar with integrated Camera,

microphone & Speaker in a single device. Microphone pickup range upto 25ft, Video inputs HDMI,

Video outputs HDMI,Other interfaces USB port for UC application(Support application like Zoom,

89 N.S. Microsoft Teams, Google Meet, GoToRoom, StarLeaf and BlueJeans). Each 1.00 4,68,278.18 4,68,278.18

Poly Studio X 50 or Equivalent

Supply, Installation, Testing & Commissioning of 70" diagonal 4K 3840*2160 UHD professional

display, ultra-high definition with incredibly rich color, Slim and symmetrical design, WiFi built-

in.Brightness 350 nits

Supply, Installation, Testing & Commissioning of 4 HDMI input & 1 HDMI output, HDMI Automatic

91 N.S. Switcher , Resolutions up to 4K@60Hz, 1 audio output port Each 1.00 1,67,242.21 1,67,242.21

Kramer VS-411 XS or Equivalent

Supply, Installation,Testing & Commissioning of 10Mtr HDMI cable support minimum resolution of 4K

Supply, Installation,Testing & Commissioning of 10Mtr active extension USB 2.0 cable.

Approved Make: Kramer/Crestron/Extron

Total SUB HEAD -D - 38,29,390.56

SH-E AIR CONDITIONING -

Supply of Split Air conditioner with Capacity: 2 TR 3STAR , Inverter including copper pipe,

97 N.S. communication cable, stand for outdoor unit, Drain pipe as required length, cutting and making Nos. 22 70727.00 15,55,994.00

good the walls etc. all complete

Total SUB HEAD -E - 15,55,994.00

Signature of Contractor with Seal Page 17 of 17 NBCC