construction of 1 No D type Quarter for staff of ANM Training centre at phulbani as per Lr No.1279 dt06.03.2025 of Directorate of Nursing Odisha Buildings.

CIVIL WORKS : Earth work in hard soil or gravelly soil within 50m . initial lead and 1.5m. Initial lift including rough dressing as per specification approved by the .

Filling in foundation and plinth with sand watered and rammed ( Labour only ) for 100 cum.

C.C. (1:3:6 ) with 4cm size hand broken hard granite metal in F&P etc.

Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:4) in foundation and plinth per cum.

R.C.C . ( M20 ) using 20mm and down grade H.G. Chips. Column Footing, Padestal.

Column : Ground Floor

Grade Beam / Plinth Bend : C. Wall

Lintel Over door & Window

Beam wall G.F

Chajja

Roof Slab

Straightening , bending , binding , and hooking M.S door for steel including cost

Cement concrete ( 1:2:4) with 12mm size h.b.g. chips .etc Complete.

Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:4) in super structure

12mm thick c.p (1:6 ) for brick work in super structure etc, complete.

16mm . C.P (1:6) over brick stone masonary.

Supplying, Fitting and Fixing Vitrified Tile Flooring ( 600 mm x 600 mm ) with cost of all materials, tiles etc, complete.

Supplying , Fitting and fixing Vitrified Tile in Dado Flooring with cost of all materials, tiles etc complete.

Dressed seasoned sal wood work in trusses, frames of door, window & ventilators, Chowkaths etc. including cost of all materials , labour and T&P require for the work etc, complete as directed by the E.I.C.

Supply fitting fixing 32 mm thick Flush door with 25 mm thick BWR playee with venier laminated including cost, conveyance of all materials , labour and T&P require for the work etc, complete.

Supplying , fitting and fixing M.S. Window and door shutters etc, complete.

Finishing wall surface with cement based Wall Putty ( water based ) of approved make and finished smooth and even surface to receive painting including cost of scafflolding staging charges with cost of all materials taxes.

Wall painting Two Coat with P.E paint over a coat of primer including cost of all materials, labour and T& P require for the work etc, complete as directed by E.I.C. Area same as inside Putty G.F.

Wall painting Two Coat with Weather coat over a coat of primer including cost of all materials, labour and T& P require for the work etc, complete as directed by the E.I.C. Area same as inside Putty ,G.F C.Wall .

Painting Two Coat with Enamel paint over a coat of primer to Door & window including cost of all materials , labour and T&P require for the work etc, complete as directed by the E.I.C.

2.5 Cm thick Grading Concrete including cost ( 1:2:2) on roof slab with 6mm size H.G. chips mixing with admixture such as polysulphide chemical compound including cost , conveyance of all materials, labour and T& P required for the work etc, complete as directed by the E.I.C.

Back filling of surplus excavated earth at work site by initial lead of 50.00 mtr including cost , conveyance of all materials, labour and T&P required for the work etc, complete as directed by

PH WORKS: Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. Ground floor ,20mm dia C-PVC pipe.

25mm dia C - PVC Pipe

32mm dia C - PVC Pipe

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15 mm dia CP angle stop cock ( jaquar ) CON-CHR -059KN

15mm dia CP two way bib cock (Jaquar)CON-041KN

15mm dia CP short body bib cock (Jaquar)CON-CHR-047KN

15mm dia CP long body bib cock (Jaquar Make)CON-107KN

25mm dia Brass FW Valve

32mm dia Brass FW Valve

25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565

CP Wall Mixer with bent pipe and hand shower provision (Jaquar/ Johnson Make)

CP Extension Piece

125mm CP Grating

C.P. Flange

Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge. 1000 liters capacity PVC water storage tank at roof first floor.

supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.

Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110 mm U-PVC SWR Pipe ( Ori plast / finolex / supreme make type -B )

110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make)

110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Socket plain (Ori Plast/Finolex/Supreme Make)

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 580 mm size Orissa pan ( Hindware / Parryware / Neycer make )

Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. .10 ltr capacity pvc L.L cistern with 32mm Dia CP long flush bend ( slimline - white-Parryware make )

Supplying all materials, labour, T&P and fixing vitreous china water closet,European wc) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. european water closet ( Hindware / Parryware / Neycer make )

Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge. 550mmx400mm W.H.basin (Jaquar/ Johnson make)with 15mm dia C.P. pillar cock with pedestal

Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen sink of all standard sizes with a pair of bracket, C.P. waste, trap, PVC waste pipe and painting brackets including supply of cement concrete, mortar etc all complete as per instruction of Engineer-in-charge. 24 inch x 16 inch x 10 inch Sink with Sink Cock/Bib Cock jayna make

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge .CP towel rail (Plaza/ Johnson Make)

Towel ring (Plaza/ Johnson Make)

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.BE Mirror Wallmount (Best quality)

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP soap Dish

Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.½ inch x 5inch CP Shower (Jaguar)

Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge .Inside size 76cmx76cmx46cm with 18 dia RCC MH cover

Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.Ground Floor Concrete 02x7ftx5inchx3 inch =17.5cuft

Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge ).Vitrified Tile Kajaria tiles 30x30cm .Ground Floor tile 2x7 inchx5 =67.5 Sqft

Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) .Kajaria tile 40x25cm .Ground Floor wall Tile 2x21 inch x7ft =185sqft

Kajaria tile 40x25cm

Providing fitting, fixing of Aluminium door with anodized AL. Flush door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge. 100mm dia P.V.C. pipe

Supplying all materials labour T&P and constructing 1.20m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.1 no 10 Users Septic tank 2.0mx0.9mx2.1mt

Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. 1 x 3.0 x 1.90 x 1.50 =

Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. 1 x 3.0 x 1.90 x 0.60 =

Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.

Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge .1 x 3.0 x 1.90 x 0.10 = 1 x 2.0 x 0.90 x 0.05 =

Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. 1 x 2.50 x 1.40 x 0.10 =

Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.0.35 cum x 2.5 x 35.32 = 30.91

Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge. RCC floor, roof slab chhaja up to 4.430 m height 1 x 2.00 x 0.90 =, 2 (2.50+1.40)x 0.20 =

Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.

Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge

Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. 1 x 3.0 x 1.90 x 0.15 =

Construction of 1 Nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer(DTH) drilling rig or combination rig with PVC pipe and installation of submersible pump set with all accessories.

Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only

Drilling of 150mm dia bore, 46 mtr to 176 mtr.

Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering of 200mm dia P.V.C casing pipes

Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.200mm dia PVC (sch-80),

Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)

Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge. By DTH Rig

Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) .1 H.P. Single phase/ three phase 3 stage head range of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm

DOL Control panel

40mm dia steel short piece

Well cap

50mm size CI bracket

2.50sqmm flat cable

Steel rope with cover

Labour charges for lowering including transportation

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor IS marked galvanised mild steel tubes (medium grade) confirming to IS: 1239/1990, part-1 of the following nominal bore, tube fittings and clamps including making good the wall , ceiling and floor, testing, cost & conveyance of all materials to worksite, payment of all taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.32mm dia HDPE Pipes (Finolex/ Supreme make)

EI WORKS: Recessed wiring to light points / fan points/ Exhaust fan / call bell point with 1.5mm2 FRLS PVC insulated SC multistrand copper conductor of ISI marked (Finolex/ Polcab/KEI/ Anchor) with 20mm dia non-metalic PVC flexible conduit (Make- AKJ/ KINJAL/ POLYCAB/ ANCHOR) with 5/6Amp., 250V Modular switch ISI marked and ceeling rose of ISI marked (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze) mounted an Modular G.I. box with Modular base and cover of suitable size (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze), with 1.5sq.mm FRLS PVC insulated single core multistrand Cu. condoctor as earth wire including all accessories and connection. As per direction of Engineer in Charge. (Make of wire Finolex / L&T/ Anchor / KEI/ Polycab/ V-Guard) Group-A.

Group-B.

Group-C.

Supply and fixing of 6Amp 3Pin modular socket with 6Amp modular switch on existing board. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)

Supply and fixing of 3 nos. of 3 pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 sockety out let and S.P. 15/16 A one way modular switch on modular G.I. Box with modular base and cover. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)

Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supply and fixing of single pole and neutral sheet steel. MCB distribution board consumer unit 240V surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required (But with out MCB/ RCCB/ ISOLATOR) (Make- L&T/ Legrand/ Schneider/ ABB).a) 8way double door

Supply and fixing of 5amp to 32 amp rating 240V "C" series miniature circuit breaker suitable for lighting and other loads of the following poles in t he existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (Make- Legrand/ L&T/ Schneider) .a) 40 Amp (DP) MCB

b) 6Amp rating to 32Amp (SP) MCB

Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex / KEI/ Polycab/ L&T/ Anchor) a) 1x1.5mm2 for Inverter wiring.

b) 2x1.5mm2 + 1x1.5mm2. in 20mm dia

c) 2x2.5mm2 + 1x1.5mm2. in 20mm dia

d) 2x4mm2 + 1x1.5mm2 in 20mm dia

e) 2x6mm2 + 2x2.5mm2 in 32mm dia

Supplying , installation , testing and commssioning of 1200 mm sweep white / milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28 W and air delivery >215 m3 / min make - crompton Energion Groove / Havells Efficiencia Neo / Usha Technix ) including wiring the down rod of standard length ( up to 30 cm ) with 1.5 sq mm PVC insulated , copper conductor, single core cable etc. as required as per direction of Engg-in-charge , Replacement Warranty will be 4 years ( with fan Regulator ).

Supplying , installation , of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers ( make - Havells / Crompton / Usha / Orient/ Bajaj ) of exhaust fan in the existing wall , including fixing & connection as required as per direction of Engg -in-charge. Replacement Warranty will be 2 years.

S/F of Bakelite angle holder / batten holder of ISI marked conforming to IS - 1258 / 1987 in place of ceiling rose ( Make Anchor / Cona ).

S/F . Of 9 Wt. LED bulb ( Philips / Panasonic / Havels ) make .

S/F. of 1x18Wt. LED tube light fiting (Philips / Panasonic / Havels) make.

S/F. of 15Wt. Surface/ Recess Circular down light LED fitting (Philips / Panasonic / Havels) make.

S/F of 90Wt. LED Street light fittings complete with G.I. Barcket (Philips / Panasonic / Havels) make.

Supplying, Erection, Fixing, connection & testing of Panasonic 40 LED GATE Light of (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.

Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials

Providing,fixing and laying of fallowing dia PN10 HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.

Supplying and fixing of call bell / buzzer ISI marked suitable for DC / AC single phase 230 volts complete as require. (Make- Cona / Anchor)

S/F of MODULAR type Bell Push- Supplying and fixing of following MODULAR type Bell push on the existing switch box / cover including connections etc as required.

S/F. of Inverter, UPS 2250VA (Make Microtech/Su-kam/Luminous)

S/F of Inverter Battery 12V 150AH (Make Exide / Amrom / Su-karm / Luminous with 48 Month warranty).

S/F. of Inverter Stand (Make Microtech/ Su-kam/ Luminous)

Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.

Supplying and laying 8SWG copper wires ISI marked at 0.5meter bellow ground level for conductor earth electrode including soldering etc as required.

Please Enable Macros to View BoQ information