Construction of 4 Nos Tube well and its appurtenant works including construction of pump house over each tube well and laying jointing of rising main etc complete in different location at Haridwar under Maha Kumbh Mela 2021 in District Haridwar

Amount

Pipe Line Work

Supply of Following size of DI pipe including laying jointing Field testing, commissioning complete at site of including all cost of material Specials Like Bend, Tee, Mechnical joint etc with labour required, transpotation, loading, unloading & stacking etc.

200 mm dia DI K9 Pipe

150 mm dia DI K9 Pipe

Supply, carting and fixing in position of following CI D/F sluice / Gate valve for flow regulation & scouring including cost of valve specials, labour & T&Pcomplete. Pressure PN 1.0

Air valve 50 mm dia

Fire Hydrant 80 mm dia

Excavation of pipe line in soil mixed with course sand, shingle, kankar, including refilling of trenches after laying of pipe line including watering ramming etc.

Dismantling of following type of road surfaces for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials.

Bituminous Road

Cement concrete road

Reinstatement of following type of road surfaces after laying of pipe line including supply of all material ,labour,T&P etc complete.

Cement concrete road

Construction of following chambers

(i) Sluice valve/ wheel valve chamber(90X90X100)

Air valve chamber / Fire Hydrant chamber

Providing Barricading along trenches including all material Lab.T & P etc complete.

Building Work : Pump House And Boundary Wall

Excavation in foundation in ordinary soil (loam clay and sand) including lift upto 1.5 m and lead upto to 50 m refilling, watering and remaining of excavated earth into trenches or into the space between the building and sides of foundation trench.

Concrete with 4 cm gauge stone ballast, local sand and cement in proportion of 6:3:1 in foundation, including supply of all materials, labour, T&P etc. required for proper completion of the work.

Mild steel or iron work in RCC work wrought to required shape as necessary including bending for proper completion of work including supply of steel and wastage etc.

RCC with cement, coarse sand and 20 mm gauge approved stone ballast in proportion of 1:1.5:3 in slabs excluding supply of reinforcement and its bending but including its fixing and binding the same with 0.50 mm thick binding wire in position and nece

Ist class 75 designation brick work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion the work.

FPS class 75 designation brick work in 1:6 cement and local sand mortar in superstructure including supply of all materials, labour, T&P etc. required for proper completion the work.

Centering and shuttering including strutting, roping and removal of forms of RCC work roof etc complete.

12 mm thick plaster with cement & local sand mortar in 1:6 over brick work minimum thickness not to be less than 10 mm including supply of all materials, labour, T&P etc. required for proper completion the work.

Same as above item no. 17 but in proportion 1:3 with cement and local sand mortar over ceiling.

Same as above item No. 17 but in proportion 1:4 with cement and local sand mortar.

40 mm thick 1:2:4 P.C.C. floor with cement and coarse sand & 2 cm gauge approved stone ballast laid in panels finished with 3 mm floating coat of neat cement and 7.5 cm thick base concrete consisting of cement and local sand and 1st class brick work.

Supply & fixing 3.5 cm thick fully paneled sheesham wood shutters, including supply and fixing and adjustment of hinges, bolts, handles and springs and other fittings but excluding painting and supply of fittings.

Supply and fixing oxidized iron fittings of approved make in door and window shutters.

Painting or varnishing of new iron or wood work with one coat of priming and two coasts of approved paint and varnish including supply of all materials, labour, T&P etc. required for proper completion of the work.

Supply and fixing of girder of 200 mm × 100 mm size 15 mm thick, over the pump house including its painting with approved paint and also one coat of primer.

Grading roof for water proofing treatment with cement mortar 1:3 (1cement : 3coarse sand )

Earth filling in water works compound and inside Plinth.

Provision for electrification inside and outside of the quarter incl.all material labour T& P etc cmplete.

Provide for internal water supply and sanitary works including cost of all fixtures, pipes etc. and supply of all materials, labour, T&P etc. required for proper completion of the work and including cost of soak pits and connection etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing wall with Acrylic smooth exterior paint with silicon additive of requared shade. New work ( two or more coat applied @ 1.43 lit/10Sqm over and including primer applied.(DSR Code 13.47.1)

Providing and fixing MS grill of required pattern in frames of windows etc with M.S.flats square or round bars etc.including priming coat with approved steel primer all complete. Fixed to steel window by welding

Fixing of 3.6m wide M.S. gate with wicket gate including fabrication and supply of steel, etc. all complete.

Providing and fixing T iron frames for door, windows, and ventilators of MS tee section, joints mitered and welded with 15x3mm lugs 10cm long embeded in cement concrete block 15x10x10cm in 1:3:6 and applying primer coat of approved steel primer.

Electrical and Mechnical works

CONSTRUCTION WORKS (FOR 04 NOS. TUBEWELLS)

Transportation of Rig Machine, Air compressor O.P unit camp equipages, connected T&P & necessary material required for drilling up to site of work, including loading, unloading etc. complete.

Errection and Leveling of Rig Machine at site of work

Dismantling of Rig Machine & Clearance of site after satisfactory completion of work.

Drilling of borehole from GL to 150 BGL mtr.of minimum pilot bore size 600 mm.after reaming including water arrangement for drilling ,back ashing ,collecting of samples from different strata, prepairing and submitting strata chart etc. Complete (150 mtr. for each tubewell)

Supply of TW assembly and other material as below-

300 mm dia MS ERW fincut 7.9 mm thick Plain pipe

300 mm dia MS ERW fincut 7.9 mm thick slotted pipe

Supply of 300 mm dia, 8 mm thick tubewell cap.

Supply of 300 mm dia M.S.D.I housing clamp complete with two nos. 200mm size M.S.channel having 3000mm length.

Supply of 300 mm dia Bail plug with nut & U- bolt as required.

Supply of Pea gravel

Preparing & Lowering of tubewell assembly starting from G.L to the required depth including cutting, welding as required at site complete with all T&P required .

Fixing of 300 mm dia bail plug with Nut & U-bolt.

Lowering of 300 mm dia MSERW housing pipe (Plain & Slotted pipe) as required.

Fixing of 300 mm dia, 8 mm thick tubewell cap.

Fixing of 300 mm dia M.S.D.I housing clamp complete with two nos. 200mm size M.S.channel having 3000mm length.

Shrouding of Pea Gravel in between bore & tubewell assembly to the entire depth of tubewell.

Development of tubewell by 250 PSI Air compressor unit to the satisfaction of Engineer in charge to give a sand free discharge & Proper packing of pea gravel.

Yield test of tubewell by the suitable capacity O.P unit. complete with lowering and lifting of pumping plant.

Chemical & bacteriological testing of water sample

PUMPING PLANTS & APPURTUNENT WORKS Supply of Submersible pumping plant capable of delivering following LPM & discharge at following mt head to be operated suitable capacity motor on 415±10% volts, 3 phase, 50 C/s AC supply with 5 mtr submersible cable.

1800 LPM,70 Mt Head.( 4 NUMBER AS SPARE)

SITC of following capacity Main switch with wooden board-

Supply and laying of following capacity 3 core Cu. conductor flat submersible cable.

Supply of jointing material such as lugs, tapes etc.

Making double loop earthing for all electrical equipment including supply of GI earth strips (25mm x5mm), GI earth plates (600mm x600mm x 6mm) , GI boxes, funnel, pipe, salt, coal etc and excavation and filling of earth pit including all material, labour, T&P etc complete as required as per latest IE rules.

(A)Supply of Main Piping & Valves comprising of following.

Main Piping and Valves -

150 mm dia MS column pipe assembly having thickness 7.1 mm both ends threaded duly socketed with interlocking arrangement complete. - 42 mtr length. M.S.D.F. bend 90º × 150 mm dia - 2 Nos. 150mm diaC.I.D/Fsluice valve with hand wheelPN-1.0-2 No. 150 mm dia C.I. D/F Reflux valve -1 No. 150 mm dia M.S.D.F. distance piece 2 mtrs. length - 1 No. 150 mm × 150 mm × 150 mm M.S.A.F.Tee - 1 No. 150 mm dia. MSDF distance piece 3.0 mtr. Long.-2 Nos. Ventury (150 x 75 mm) of 0.30 meter long- 1 No. 150 mm dia MS DI clamp heavy duty - 1 Set. M.S.T/W Cap (150 x 300 mm) - 1 No. Nuts, bolts, rubber / fiber packing for jointing above pipes & specials - 1 set.

Supply and fixing of 100 mm dial pressure gauge with control cock and fittings of range 0-15kg/cm2 & 100 mm dial depth direct reding type complete with air line & fittings.

Chain pully block

Supply of 3.0 tonne capacity 4.5 mt lift chain pulley block

Supply of rubber resistance insulated sheet. 1m x 2m x 0.025m

Supply of following tools required for maintenance of pumping plants. DE spanner set - 1 Set (6/7mm to 20/22mm) Ring spanner set - 1 Set (7/9mm to 20/22mm) Screw drivers - 2 Nos. Pliers - 1 No. (10"/12") Hammeres - 1 No. ( 3 Kg.) Pipe wrench 14" - 1 No. Screw wrench - 1 No. Crimping tool scissor type - 1 No. Tong tester - 1 No. Chain wrench 100 mm dia - 2 Nos.

Installation and commissioning of pumping plant

Installation and Commissioning of Pumping Plants with acessories inside the pump house and with civil works such as foundations blocks for valves, pipes & cable trenches etc.

Testing of pumping plant at manufacturer's works/site.

Painting of entire pumping plant installation with 2 coats of super enamel paint.

SITC of Chlorinator Dozer Pumps,Capacity: 6 lph,8 kg/cm² pressure.

Accessories for Chlorinator Dozer pumps set as following Injector and NRV with PVC pipes etc. 200 Ltr. Capacity PVC tank. Starter cum panel Single phase automatic stabilizer Chlorine testing kit

Supply of Sodium hypo-chloride (Naocl) solution.

SERVO STABILIZER

SITC of , 3 phase digital rolling contact servo voltage stabilizers suitable for unbalance voltage & unbalance load including laying of proper size cable and fixing of proper size copper lugs on input and output cables on both ends at different sites. For input voltage 330 - 460 volts (phase to phase)

70 Sq. mm Al. armoured cable 3.5 core, 1.1 K.V. Grade.

163 Amp., TPN, Change over switch with wooden board

Complete GI double loop earthing with materials such as earth plate, earth strips, coal, salt etc. required as per IE rules.

Installation

Commissioning

Testing

At works

At site

INTERNAL/EXTERNAL ELECTRIFICATION OF PUMP HOUSE

Wiring for light point, fan point etc. with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface PVC conduit with piano type switch, phenolic laminated sheet, suitable size GI box, with earth wire of 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/submain alongwith earth wire with the following size of FR PVC insulated copper conductor single core cable in surface PVC conduit as required.

2x2.5 sq. mm + 1x2.5 sq. mm earth wire

2x4 sq. mm + 1x4 sq. mm earth wire

Supply and fixing of Piano type 5 amp switch on the existing switch board.

Supply and fixing of 3 pin 5/6 amp socket outlet on the existing switch board.

Supply and fixing of metal box of 180 mmx100mmx160 mm deep on surface with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15x16 amp socket outlet and 15/16 amp piano type switch, connections, painting etc as required.

Supply and fixing of 8 way double door S.P.N. sheet steel, MCB DB, 240 V on surface complete with copper bus bar, neutral bus bar, earth bar, inter connections including earthing etc as required. (But without MCB/ RCCB/Isolator)

8 way double door

Supply and fixing of 5 A to 32 A, 240 V, 10 KA, C serious MCB suitable for inductive load of following pole in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of double pole, 240 V, isolator in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of bulk head light Bajaj / Philips / equivalent make

Supply and fixing of 40 W LED tube light complete in all respect (Bajaj / Philips / Equivalent make)

Supply and fixing of 14 watt LED bulbs on above fitted Holder (Bajaj / Philips / Equivalent make)

Supply and fixing of 23 watt LED external lighting luminaires with mounting bracket etc. complete.

Stablization ( WITH OUT ELECTRICITY)

Cost of stablization for 6 months (O & M) T.W.-1

Cost of stablization for 6 months (O & M) T.W.-2

Cost of stablization for 6 months (O & M) T.W.-3

Cost of stablization for 6 months (O & M) T.W.-4