Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹6.4 Cr
EMD Value
₹6.4 L
Closing Date
2 Nov 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Repair, rehabilitation and retrofitting of distressed reinforced concrete structures of Academic Block-II (Physics, Maths and Chemistry Building) at SVNIT Campus, Surat.
NBCC/RBGDelhi1/NIT/SVNIT/2022/48~EWb214ca6cc52f7c0f01986fb8
NBCC/RBGDelhi1/NIT/SVNIT/2022/48
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹6.4 L
2 Nov 2022
15 Oct 2022
2 Nov 2022
15 Oct 2022
2 Nov 2022
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Scaffolding & fixing the continuous vertical curtain/covering: Providing and fixing
double scaffolding system (cup lock type) on the exterior side, up to three or seven
story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal &
vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.
clamps and M.S. staircase system in the scaffolding for working platform etc. and
maintaining it in a serviceable condition for the required duration as approved and
removing it there after. The scaffolding system shall be stiffened with bracings,
runners, connection with the building etc wherever required for inspection of work
at required locations with essential safety features for the workmen etc. including
1 NS providing and fixing Scaffolding net of required width made of high density 12000.00 Sqm 0.00 190.00 - 22,80,000.0
Polyethylene UV stabilized knitted on warp knitting machines having density
100gm/sqm and shading coefficient minimum 75% around the construction site/ for
vertical extension as per requirement including fastening/tying with
building/scaffolding pipes or with any other fixtures etc. complete as per as per
specification and direction of Engineer-in-Charge. The elevational area of the
scaffolding & scaffolding net shall be measured for payment purpose.( The payment
will be made once irrespective of duration of scaffolding.)
Temporary Supports: Providing, fabricating & erecting temporary supports to
the structural members like beams, slabs etc. to relieve the load on the
members during breaking of damaged concrete, removal guiniting,
excavation or any dismantling work as per the instruction of engineer in-
charge/consultant. These supports shall be provided either in the form of
2 NS props or trestles fabricated using structural steel as per the requirement and as per
the instruction of EIC/Consultant. Item rate is inclusive of the materials, all
labour, supervision, tools and tackles and transportation & taking away scrap etc.,
complete as per direction of Engineer-in-Charge
Total of Part A - 24,13,000.0
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
B DISMANTLING & DEMOLITION:
Plaster removal: Dismantling/chipping old plaster or skirting, raking out joints,
cleaning the surface for new plaster including disposal of rubbish to the dumping
3 NS ground or specified location within 50 metres lead as per direction of Engineer-in- 5000.00 Sqm 0.00 45.05 - 2,25,250.0
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel
4 15.3 bars and disposal of unserviceable material within 50 metres lead as per direction of 1200.00 Cum 2928.10 0.00 35,13,720.0 -
engineer - in- charge.
Demolition of Brick work: Demolishing brick work manually/ by mechanical means
including stacking of serviceable material and disposal of unserviceable material
within 50 metres lead as per direction of Engineer-in-charge.
Total of Part B 40,23,255.0 2,25,250.0
C REPAIRS & RETROFITTING:
Reinforcement Cleaning: Cleaning reinforcement of total rust by tapping or using
wire brush or any other suitable way including from behind and around the
6 NS reinforcement bars to give it a totally rust free finished steel surface as per the 3500.00 Sqm 0.00 45.00 - 1,57,500.0
manufacturing specifications and as per the direction the Engineer-in-charge.
Rust Removal: Providing and applying approved alkaline chemical rust remover
with paint brush and removing loose particles after 24 hours of its application as per
the manufacturing specifications and as per the direction the Engineer-in-charge.
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Rust Removal: Cleaning as directed & specified all rust/ scales/corrosion from
reinforcement bars using rust remover Reebaklens RR- Rust remover, cleaning and
etching agent supplied in 1 and 5 Litre containers, having Specific Gravity 1.16 - 1.22
@ 25°C. Reebaklens RR cleaning agent is a combination of acid based material,
corrosion inhibitors and dispersing agents and is supplied as a clear green solution.
Application of Reebaklens RR coverage @ 2-2.5 m2/ltr with brush for complete
7.1 NS wetting of rusted metal surface and allowed to react it for 16-24 hours followed by
cleaning the surface with wire brush and washing surface with fresh water as
required to exposed reinforcement bars complete as specified.
HSE Guidelines : Recommended to wear tight-fitting, dust-resistant, chemical splash
goggles if airborne dust is generated, Wear protective gloves. Wear appropriate
clothing to prevent any possibility of skin contact.
Anticorrosive Treatment to Steel: Providing and applying single coat of zinc rich anti
corrosive coating such as nitozinc primer in 40 micron thickness to the exposed
reinforcing bars after application of alkaline rust remover on main and lateral links
all complete as per the manufacturing specifications and as per the direction the
Engineer-in-charge.
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Anti-corrosive epoxy zinc rich coating: Providing & applying inhibition coats/system
to exposed reinforcement bars after drying & also new bars after cleaning &
removing scales and rust completely as specified. Nitozinc Primer- Two component
epoxy zinc rich primer supplied in 1 and 5 Litre pack, two component systems based
on metallic zinc and epoxy resin which on mixing gives a grey coloured liquid. An Anti
corrosive coat contents Active 'Zinc-rich' system which combats corrosion by electro
chemical means. Having specific gravity of 1.75, Adhesive bond strength > 1.5
N/mm2 Solid content- 60 %, Fully dry/Recoatable- 45 minutes to 1 hour. Typical
application includes surface preparations by cleaning steel surface to a bright
condition paying particular attention to the back of exposed steel bars, mixed two
components slow speed heavy duty drill fitted with a paddle, applying unbroken
coat of 100 microns WFT with suitable brush coverage @ 4-5 m2/ltr and allow to dry,
8.1 NS after 30 mins apply second coat to ensure complete cover to exposed steel/ rebar
etc. complete. Total Dry film thickness is 40 microns/coat.
HSE Guidelines : Nitozinc Primer and Nitoflor Sol should not come in contact with the
skin and eyes, or be swallowed. Adequate ventilation
should be ensured and inhalation of vapours should be avoided. Suitable protective
clothing, gloves and eye protection shall be worn. If working in confined areas,
suitable respiratory protective equipment must be used. The use of barrier creams,
provide additional skin protection. In case of contact with skin, it shall be rinsed with
plenty of water, and then cleansed with soap and water.
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto plinth level.
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more 45000.00 Kg 89.65 40,34,250.0
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Epoxy Bond Coat: Providing and applying bond coat on the prepared surface to
receive new polymer mortar/polymer modified concrete, with two components
epoxy based bonding coat Concresive 1414 of BASF/Nitobond EP of Fosroc or
equivalent material in one full coat. Laying of reinstatement polymer mortar or
micro concrete shall be completed within the overlay time of bonding coat. This
10 NS bond coat act as bonding agent between old and new concrete. Item rate inclusive 2500.00 Sqm 0.00 365.00 - 9,12,500.0
of all materials, labours, supervision, tools, tackles, transportation, fixing etc.,
complete as per the manufacturing specifications and as per the direction the
Engineer-in-charge.
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Epoxy Bond Coat: Providing and applying bond coat on the prepared surface to
receive polymer modified mortar/polymer modified micro concrete, with two
component epoxy based bonding coat Nitobond EP- Epoxy resin concrete bonding
agent supplied in 1/2, 1 and 4 Litre packs, having specific gravity 1.15 to 1.2 gm/cc,
Compressive strength(BS 6319 Pt.2)- 50 Mpa at 7 days, Flexural strength strength(BS
6319 Pt.3)- 35 Mpa at 7 days, Tensile strength (BS 6319 Pt.7)- 20 Mpa at 7 days,
Shear Strength (BS 6319 Pt.4)- 10 Mpa at 7 days, having an over lay time of 6 hrs and
30 ̊C, High bond strength High bond strength: Bond strength is more than the tensile
strength of good quality concrete, Barrier coat : Acts as a ‘barrier coat’ to the
migration of chloride ions from host concrete. Laying of reinstatement polymer
modified mortar or micro concrete shall be completed within the overlay time of
bonding coat. The bond coat act as a bonding coat between old and new concrete.
Typical application includes cleaning all loose dust, dirt, grease from host concrete
10.1 NS surface by suitable means, mixing both components of bond coat by heavy duty slow
speed mixer until a uniform consistency, apply unbroken coat of Nitobond EP
coverage @ 2.6 m2/ltr with stiff brush covering complete area of patch repair and
allow the same to become tacky before placing mortar or micro concrete. Item rate
is inclusive of materials all labour, tools and tackles, scaffolding and transportation
etc. complete as per specification and as directed by Engg. in-charge.
HSE Guidelines : Recommended to wear tight-fitting, dust-resistant, chemical splash
goggles if airborne dust is generated, Wear protective gloves. Wear appropriate
clothing to prevent any possibility of skin contact. Barrier creams provide additional
skin protection. Do not smoke during use. Maintain ample ventilation. If contact with
the resin occurs, wash immediately with a strong detergent or a resin removing
cream. Eye contamination must be immediately washed with plenty of water and
medical treatment sought.
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Single Part PMM Treatment: Providing and laying of polymer modified single
component, alkaline resistant fibre reinforced, duel shrinkage-compensated,
thixotropic, cementations patch repair mortar Emaco S48CT of BASF/ Renderoc
SP 40 of Fosroc or equivalent material that achieves compressive strength of 35
MPa at 7 days and finishing with trowel carefully compacting the same
around the rebars and finishing to bring it in line with existing concrete surface on
the beams, slabs. pile caps etc., where the thickness of application is less than
11 NS 50mm in patches as per specification after applying bonding coat (bonding
coat shall be payable separately). Item rate inclusive of all materials, labours,
supervision, tools, tackles, etc., complete as per the manufacturing
specification and as per the direction the Engineer-in-charge.
11.1 NS (a) For Built up thickness of up to 40 mm (incl.+5mm) 350.00 Sqm 0.00 2100.00 - 7,35,000.0
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Polymer modified Mortar-Patch repair (Up to Grade M45): Providing and laying
Renderoc SP 40- shrinkage controlled polymer modified single component, alkaline
resistant fibre reinforced, thixotropic, cementitious patch repair mortar supplied in
25 kg moisture resistant bag when mixed with clean water at w:p ratio 0.18, achieves
compressive strength (BS 1881 Pt.116) -> 20 Mpa at 1 day & > 45 Mpa at 28 days,
Tensile Strength(BS 6319 Pt.7) > 2.5 Mpa at 28 Days, Flexural Strength(BS 6319
Pt.3)>7 Mpa at 28 days, Drying shrinkage to ASTM C 157-93, 28 days < 1000
microstrain capable of applying up to 50 mm thickness in single layer. Renderoc SP
40 shall have CE (CE-29842) marking and compliance according to Construction
Products Directive 89/106/EEC (CPD). Typical application includes mixing entire bag
with clean water about 4.25L to 4.5 L, mixed in suitable container with heavy duty
slow speed mixer machine to achieve uniform lump free mortar consistency, placing
over prepared surface or tacky Nitobond EP surface in recommended thickness and
finishing with trowel carefully compacting around the rebars to bring it in line with
existing concrete surfaces on the beams, slabs, piles etc. Item rate is inclusive of
materials all labour, tools and tackles, scaffolding and transportation etc. complete
as per specification and as directed by Engg.-in-charge.
HSE Guidelines : Recommended to wear tight-fitting, dust-resistant, chemical splash
goggles and mask if airborne dust is generated, Wear protective gloves. Wear
appropriate clothing to prevent any possibility of skin contact.
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Shear Connectors Providing and Fixing Shear connectors of 10 mm dia. HYSD steel
with two component, styrene & cement free, epoxy-acrylate fixing and anchoring
compound (having the technical parameters mentioned in material specifications)
using standard sealant applicator gun after drilling holes of 12mm diameter to a
12 NS minimum depth of 100mm at required locations, inclusive of all material, manpower 2500.00 Nos. 0.00 105.00 - 2,62,500.0
and equipment as per the specifications and as per the direction the Engineer-in-
charge. . Master Flow 935 of BASF / Lokfix P25 of Fosroc or equivalent
Anchoring in Slab: Drilling min +4mm dia drill with min 10 D depth in RCC slab to
anchor 10 mm horizontal bars. The same shall be filled with Lokfix P45 as per
manufacturer Specification and as per the direction the Engineer-in-charge.
Leak-proof Shuttering for Encasement: Centering and shuttering with 12mm thick
waterproof plywood including strutting, propping etc. with using tap/
thermocoal/POP for leakproof joint for concrte and micro concrete shuttering and
14 NS removal of form work for below mentioned as per the specification and as per the - -
direction the Engineer-in-charge.
Suspended floors, roofs, landings, balconies and access platform
Lintels, beams, plinth beams, girders, bressumers and cantilevers
c NS Columns, piers, abutments, pillars, posts and struts 2350.00 Sqm 0.00 470.00 - 11,04,500.0
RCC/ Cement Concrete: Providing and laying cement concrete of minimum M:30
grade in slab. The concrete to be added with Corrosion Inhibitor admixture like
Auramix BCI of Fosroc or equivalent at 3 to 5 kg / cum dosages and including
polymer, shrinkage compound etc. as and when required. The rate shall include all
necessary testing of concrete, curing, labour and all the chemicals, polymers,
compound etc. for all floor levels, excluding the cost of centring, shuttering and
finishing. The coarse sand (zone-III) derived from natural sources : 3 graded stone
aggregate 20 mm nominal size all complete as per the specification and as per the
direction the Engineer-in-charge.
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Micro concrete : Polymer Modified Micro- Concrete: Providing and laying of
polymer modified micro- concrete like Emaco S46 T of BASF/Renderoc RG (S) of
Fosroc/ReCon MC 40 of Conmix or equivalent material blended with washed,
saturated surface-dry (SSD), graded, low absorption, high density aggregates of
size 8 mm & below up to 50% (as and when required) by weight of micro-concrete
and water at 4 lit. per 25 kg bag and pouring into the form work using suitable
pumping device for uniform flow of concrete. The side shuttering can be
removed after 3 days and the bottom shuttering after 7 days ensuring proper
bond between the micro concrete and existing concrete substrate. Item rate
inclusive of all materials, labours, supervision, tools, tackles, transportation, curing,
making of hole etc. Complete as per the manufacturing specification and as per the
direction the Engineer-in-charge.
Curing compound: Providing and applying Acrylic based chemical compound of
approved make (Krishnaconchem/Sika/Fosroc/ Basf) on RCC member complete as
per the manufarcturing specification and as per the direction the Engineer-in-charge.
Nozzle Fixing: Drilling 12 - 16 mm dia holes at honeycomb portions / voids /
construction joints cracks etc. spaced at specified spacing and placing 8 - 12
mm dia. PVC nozzle of length 75 mm suitable for grouting into a 150 mm
18 NS deep hole sealing with epoxy putty including cutting of nozzle after the grouting 7000.00 Nos. 0.00 60.00 - 4,20,000.0
and finishing with polymer mortar etc. complete as per the specification and as per
the direction the Engineer-in-charge.
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Injection Grouting: providing and executing injection/pressure grouting in cracks
in the parent concrete by fixing PVC/Aluminium nipples at 150 mm to 200 mm
distance or specified distances as per design and detailed specifications. Pressure
grouting using low viscous epoxy grout Conbextra EP 10- Moisture insensitive epoxy
resin injection material supplied in 1.5 Litre pack which can grout gaps ranging from
0.25mm to 9mm, having mix density 1060 kg/m3,Compressive Strength(ASTM D695)-
60/mm2, Tensile Strength(ASTM C 304-97)-20 N/mm2, Flexural strength(BS 6319
Part 4)-45 N/mm2. Pressure grouting shall be carry out after surface preparations
includes fixing nipples and filling cracks with epoxy mortar one day before grouting,
injecting low viscous grout mechanically about pressure 3.5 - 7.0 kg/cm² , removing
nipple after grouting and sealing with epoxy mortar etc. complete as as per the
manufacturing specification and as per the direction the Engineer-in-charge. .
Payment shall be made on actual grout consumed.
HSE Guidelines : Conbextra EP10(M) : Contains resins which may cause sensitisation
by skin contact. Avoid contact with skin and eyes and
inhalation of vapour. Recommended to wear tight-fitting, dust-resistant, chemical
splash goggles if airborne dust is generated, Wear protective gloves. Wear
appropriate clothing to prevent any possibility of skin contact. Barrier creams
provide additional skin protection. Keep away from sources of ignition - no smoking.
Maintain ample ventilation.
Corrosion Inhibitor: Providing & applying bipolar migrating corrosion inhibition
treatment to the overall concrete surface repair area including area where
reinforcement is exposed. The product shall be as per specifications ,Item rate is
20 NS inclusive of the materials, all labour, supervision, tools and tackles and 10000.00 Sq.m 0.00 125.00 - 12,50,000.0
transportation etc., complete as per specification and as direction of engineer in
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Galvanic Sacrificial Prevention of steel by Point anodes: Providing and fixing
sacrificial zinc anode to prevent initialization of corrosion of reinforcement in
adjoining sound concrete due to chloride ingress or prevent corrosion due to loss of
passivity due to carbonation etc. by installing anodes from VECTOR Galvashield XPI
of size 25X25x125mm and having zinc mass of min. 60 grams of 1 A P type or
equivalent for patches or periphery of patches at Min. 2 to 4 anodes / Sq.mt. area of
concrete (spacing of 430 to 610mm) or equivalent, as per manufacturer
specification, covered with mortar with of resistivity less than of parent concrete on
21 NS the cleaned reinforcement steel as per manufacturers specification before applying 2000.00 Nos. 0.00 1300.00 - 26,00,000.0
passivatior coating and also design calculation , monitoring for current available
from anodes as required by manufacturer as per IS12696 etc. at all heights and
including of all material, labour, tools, plant and machineries, etc. complete as per
the manufacturing specification and as per the direction the Engineer-in-charge.
Powerthrow: Insertion of POWRTHROW, sustained release Corrosion inhibiting
caplets which protect both anodic & cathodic sites and reduces Corrosion potential
in the reinforcement steel, by drilling 25 mm dia holes into the concrete at a depth
of 60 mm and inserts to be filled by epoxy mortar as per the manufacturing
specifications and as per the direction the Engineer-in-charge.
BRICK WORK ABOVE PLINTH- Brick work with common burnt clay F.P.S. (non
23 6.4 modular) bricks of class designation 7.5 in superstructure above plinth level up to - -
floor V level in all shapes and sizes in :
23.1 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 120.00 Cum 8512.10 0.00 10,21,452.0 -
New External Plaster : 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement
plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
New Internal Plaster in patches: Repairs to plaster of thickness 12 mm to 20 mm
in patches of area 2.5 sq.meters and under, including cutting the patch in proper
shape, raking out joints and preparing and plastering the surface of the walls
complete, including disposal of rubbish to the dumping round, all complete as per
the specifications and as per the direction the Engineer-in-charge. .
25.1 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) 1500.00 Sqm 462.30 0.00 6,93,450.0 -
Providing and applying white cement based putty of average thickness 1 mm, of
26 13.8 approved brand and manufacturer, over the plastered wall surface to prepare the 1500.00 Sqm 123.85 0.00 1,85,775.0 -
surface even and smooth complete.
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :
27.1 13.43.1 Water thinnable cement primer 800.00 Sqm 64.46 0.00 51,568.0 -
Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile Organic Compound ) content less than 50 grams/ litre of approved brand
and manufacture, including applying additional coats wherever required to achieve
even shade and colour.
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
External Paint :Providing & Applying Polymer waterproof Painting of Asian Paints
Ultima Protect/Dulux Next Gen Paint/ Pidilite Raincoat , 1 Base coat of Polymer
Duralife without dilution & 2 Coat, Top coat of Ultima Protect/Dulux Next Gen Paint/
Pidilite Raincoat with 40% water dilution. Scrapping old paint, Cleaning all surface by
Jet Pressure pump of fresh water, removing all fungus, vegetation, Algae & Opening
crack by grinder in 'V' shape up to 3mm, cleaning, 1 coat primer & filling all cracks by
crack seal, finishing, Cleaning the surround surface etc. as per manufacturer
specification. The paint shade shall be approved by engineer in charge.
Approved Make: Asian's Ultima Protect/DuluxNext Gen Paint/ Pidilite Raincoat
29 NS With 10 yrs. guaranty for Paint & 10 yrs for water seepage. Scaffolding shall be paid 5000.00 Sqm 0.00 200.00 - 10,00,000.0
extra at actual.
Measurement: Paint applied Surface measurement.
Special Note: Two stages inspection shall be done by manufacturer 1) After Surface
preparation 2) Final certification of paint application confirming the quality / DFT &
consumption as per specification. Final warranty certificate shall be released on
successful application on confirmation by engineer in charge & manufacturer.
Dismantling/ removing tile work & Granite Work for thickness of 10mm to 25mm in
floors/walls and platform/counter laid in cement mortar including stacking of
30 NS serviceable material and disposal of unserviceable material within 50 metres lead or 2500.00 Sqm 0.00 76.95 - 1,92,375.0
specified location all complete as direction of Engineer in charge.
Providing and laying Vitrified tiles in different sizes (thickness to be
specified by manufacturer), with water absorption less than 0.08 % and
conforming to I.S. 15622, of approved make, in all colours & shade, in
31 11.46 skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1
cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/
sqm including grouting the joint with white cement & matching pigments
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
E Electrical work
Testing & commissioning the Wiring for light/ power plug and dismantle/ removing
damaged wiring and supplying and fixing as per required sizes at site condition of
FRLS PVC insulated copper conductor, single core cable as per required (3x1.5sq.
mm, 3x2.5sq.mm or 3x4.0 sq.mm) size as per site condition with medium class PVC
pipe as required (20/25/32/50 mm) size along with accessories in surface/recess
including cutting the wall and making good the same in case of recessed conduit as
complete as per the specification and as per the direction the Engineer-in-charge.
Testing & commissioning the light point/ fan point/ exhaust point and any other
point and removing/ dismantle damaged and fixing the new light point/ fan point/
33 NS exhaust fan point as required at site complete as per the specification and as per
the direction the Engineer-in-charge.
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box including
34 NS connections etc. as required all complete as per the specification and as per the 600.00 each 0.00 65.00 - 39,000.0
direction the Engineer-in-charge.
Removing the damged or deterious GI fan box with providing & fixing round(125mm
dia)/hexagonal (100mmx100mm) PVC fan box with steel bar 10 or 12 mm dia hook
in RCC Slab as per site condition, all complete as per the specification and as per the 350.00 each 0.00 35.00 - 12,250.0
direction the Engineer-in-charge.
Total of Part E - 21,97,250.0
F Miscellaneous Work
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
35 12.21 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3
(1 cement : 3 fine sand) as per standard design.
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Providing and laying water proofing treatment on roofs of slabs by
36 22.6 applying cement slurry mixed with water proofing cement compound 3000 Sq.m 585.55 0.00 17,56,650.0 -
consisting of applying:
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed
with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps
of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm
mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @
1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing
for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and
tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (whichfourth and final
layer of brick tiling with cement mortar (which will be paid for separately.)
For the purpose of measurement the entire treated surface will be
37 22.14 Grading roof for water proofing treatment with
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
Refixing old Vitrified tiles ( which is removed in the existing building) in floors,
skirting, riser of steps with required thickness bed of cement mortar 1:3 (1 cement: 3
coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including grouting the
joint with white cement & matching pigments, including cleaning of tile, shifting of
tile etc. all complete as per the specification and as per the direction the Engineer-
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Refixing old granite of 18 mm thick ( which is removed in the existing building),
machine cut for Kitchen/ Lab/ classroom platforms, vanity counters, window sills,
facias laid with required thickness base cement mortar 1:4 (1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch
39 NS ups, including rubbing, curing, moulding and polishing to edges to give high gloss 800 Sq.m 0.00 400.00 - 3,20,000.0
finish, including cleaning & shifting of granite, shifting of granite etc. complete at all
levels complete as per the specification and as per the direction the Engineer-in-
Providing and fixing granite of 16 to18 mm thick, machine cut for kitchen/ lab/
classroom platforms, vanity counters, window sills, facias, staircase and similar
locations of required size, approved shade, black colour as well as already laid in
existing building and texture laid over 20 mm thick base cement mortar 1:4 (1
40 NS cement : 4 coarse sand), joints treated with white cement, mixed with matching 281 Sq.m 0.00 1900.00 - 5,33,900.0
pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to
edges to give high gloss finish etc. complete as per the specification and as per the
direction the Engineer-in-charge.
Water Proofing: Cleaning the slab properly, identifying the cracks, opended the
cracks 3mm deep and wide. first coat of applying SBR polymer (of approved make)
and second coat SBR polymer (of approved make) with modified Cement mortar,
Mix 1L SBR with 2kg fresh cement, third coat of repairing with SBR/Crack seal. after
that fourth coat of Finishing the surface with 20 mm thick jointless cement mortar
of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge including laying glass
fibre cloth of approved quality in top layer of plaster and finally finishing the surface
with trowel with neat cement slurry and making pattern of 300x300 mm square 3
mm deep. The whole terrace so finished shall be flooded with water for a minimum
period of two weeks for curing and for final test.“All above operations to be done in
order and as per the specifications and as per the direction the Engineer-in-charge.
Core Cutting from RCC slab: Cutting with diamond bit cutter to make an opening of
42 NS 100 mm diameter from slabs, beam complete as per the specification and as per the 50 No 0.00 650.00 - 32,500.0
direction the Engineer-in-charge.
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Bill of Quantities (BOQ)
Repair, rehabilitation and retrofitting of distressed reinforced concrete structure of Academic Block-II ( Physics , Chemistry & Mathematics Building) at
Vol I & II ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE DSR AMOUNT [RS.]
Removing false ceiling in floors including stacking material within 50 metres lead all
43 NS complete with any thickness as per the specification and as per the direction the 5000 Sq.m 0.00 30.00 - 1,50,000.0
Engineer-in-charge.
Providing and laying chemical resistance pipe for drainage as per site requirement
including all fitting accessories and jointing of pipe as per site condition all complete
as per the specification and as per the direction the Engineer-in-charge
Removing /repairing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes size as
per site requirement, having thermal stability for hot & cold water supply including
all CPVC threaded fittings This includes jointing of pipes & fittings with one step
CPVC solvent cement, trenching, refilling & testing of joints complete as per the
specification and as per the direction the Engineer-in-charge.
Panelled door, all types of window, all type of partition removing & refining the
46 NS same as required accessories as per site condition as per the specification and as 300 Sq.m 0.00 200.00 - 60,000.0
per the direction the Engineer-in-charge.
S S Railing removing & refixing the same with including accessories and all complete
47 NS as per the specification and as per the direction the Engineer-in-charge. 750 Metre 0.00 200.00 - 1,50,000.0
Removing ACP Sheet in columns including stacking material within 50 metres lead
48 NS all complete with any thickness as direction of Engineer in charge. 5000 Sq.m 0.00 30.00 - 1,50,000.0
Digitally signed by
DEVENDRA DEVENDRA SINGH
SINGH RAJPOOT RAJPOOT
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT.pdf
Tender Document
Approved make.pdf
Tender Document
Approved makes-NBCC.pdf
Tender Document
Drawing PCM.pdf
Tender Document
GCC - 2019 - Contractors NBCC - Amendment 01 to 18.pdf
Tender Document
Special Condition of Contract.pdf
Tender Document
Specification.pdf
Tender Document
Integrity Pact - SVNIT.pdf
Tender Document
BOQ - SVNIT.pdf
Tender Document
corrigendum-1411-Corrigendum 04.pdf
pdf • 0.09 MB
corrigendum-1097-corrigendum 03.pdf
pdf • 0.35 MB
corrigendum-1087-Corrig 02.pdf
pdf • 0.63 MB
corrigendum-1081-Corrigendum Integrity pact.pdf
pdf • 1.61 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .