REPAIR/MAINTENANCE OF RUNWAY AND OTHER CONNECTED WORKS, REPAIR /REPLACEMENT OF MISC B/R AND E/M WORKS WITH ALLIED SERVICES AT ALG ZIRO UNDER GE(AF) TEZPUR

Amount

Site clearance in soft/loose soil,complete all as specified and directed.

Surface dressing n.exe 15 cm deep in soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil, each n exc. 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc. 50 m and making good surface, complete all as specified and directed.

Dismantling fencing wire mesh,any type,complete all as directed.

Dismantling barbed wire, galvanised, 2 strand,2.00mm dia barbed at 75mm spacing,complete all as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section,embedded in concrete,masonry, brickwork etc.,including taking out embedded portion and making good disturbed ground, complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sq. M each, complete all as directed.

Materials and Labour for plain cement concrete (1:4:8) Type D-2 using 40 mm graded aggregate,in foundations, filling and mass concrete, complete all as specified and directed.

Supply only integral water proofing compound all as specified

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:4),including demolition of existing brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as specified and directed.

Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed.

Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.

Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

Supply and Fix, aluminium handles, cast type, anodized, 150 mm size, complete all as specified and directed.

Supply and Fix in repairs,mild steel pressed handles,125 mm size, oval type, black Japan finished,complete all as specified and directed.

Supply and Fix, medium wight, cold rolled mild steel butt hinges,100 mm size,complete all as specified and directed

Supply and Fix in repairs, mild steel, 300 mm, ordinary rat-tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and Fix in repairs,floor door stopper of aluminium alloy body and tongue,anodised,overall length of cover plate 140mm,with hard drawn steel spring,fixed in floor,complete all as specified and directed.

Supply and Fix in repairs,Harrison rails,anodised aluminium alloy,with fixing brackets,stops, rollers etc.,complete all as specified and directed.

Supply and Fix in repairs,brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges,complete all as specified and directed.

Supply and Fix in repairs, mild steel, 2 Levers,mortice lock,vertical type, size100 mm,complete all as specified and directed.

Supply and Fix in repairs,aluminium (extruded section) body door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Supply and Fix in repairs,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Materials and Labour for mild steel works,hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 complete all as specified and directed.

Supply and Fix, mild steel screw bolts (machine made), with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, diameter of shank 11 to 15 mm, length of bolt exc.5 cm but n.exc.10 cm long, complete all as specified and directed.

Supply and Fix, mild steel round bars,Gde-I,IS 432(Part-I), 10 mm dia.,cut to length, bend to shape required including cranking, bending, hooking ends and securing to fencing post as in stiffners to GI Chain Link fencing, complete all as specified and directed.

Supply Only,galvanised mild steel plain wire, 3.15 mm/ 4 mm dia., complete all as specified.

Supply Only,Chain link MS galvanisd fencing, any size or type,complete all as specified.

Supply Only,barbed wire, galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings ,complete all as specified.

Fixing Only,chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts,etc.including provision of binding wire,complete all as specified and directed. Note:- Supply of chain link fencing and wire will be measured and paid seperately.

Fixing Only galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. , complete all as specified and directed. Notes:- (i) Each line wire will be measured. (ii) Supply of barbed wire and steel wire will be measured and paid seperately.

Restraining,resecuring including making good staples etc. for galvanised steel concertina coil 600/750 mm dia. having 50-53 turns and approximate weight 8.5-9 Kg and suitable to be stretched to cover a distance of 5-7 running meter,complete all as specified and directed. Notes:- (i) Overall length as laid will be measured. (ii) Existing concertina coil shall be restrained/resecured as per manufacturer's instructions.

Servicing/Repairs to existing steel rolling shutters,with top cover, hasp and staple, push pull or manual type/ gear operated type with bevel gear box and crank handle by greasing of guide channels, hasp and staple,roller springs,bearings etc., including replacement of unserviceable nuts,bolts & washers in roller pulley and top cover,alignment of laths etc. for smooth operation of shutter,complete all as specified and directed. Notes:- (i) Height shall be measured from the bottom of the lintel to the finished floor cill level. Width shall be measured inclusive of the width of the side guides. (ii) Cost of materials such as lubricants,screws,nuts,bolts & washers etc.shall be deemed to be inclusive in the quoted rate.

Supply and Fix,anodised aluminium, door frame with anodised aluminium shutters,side hung type, without sash bars, with top rail, styles, lock rail and bottom rail, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable barrel tower bolts of extruded section (2 No.) suitable handle (2 No.), lock (01 No),screws etc.with and including 5.5 mm thick sheet glass,tinted,complete all as specified and shown on drawings and including taking down existing frame with shutters (without taking off shutters from the frame),complete all as specified and directed. Notes:- (i) Refer list of Drawings. (ii) Overall size of opening will be measured.

Supply and Fix,anodised aluminium, window and ventilator frame with anodised aluminium two track sliding glazed shutters,without sash bars,including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading,locking arrangements,handles,screws etc. with and including 4mm thick sheet glass,tinted,complete all as specified and shown on drawings and including taking down existing frame with shutters (without taking off shutters from the frame),complete all as specified and directed. Notes:- (i) Refer list of Drawings. (ii) Overall size of opening will be measured.

Supply and Fix, expandable anodised aluminium grill, 7.1 mm thick, weighing 2.911 Kg/Sq M (Section Code 22603 of 'Jindal' or equivalent of Hindalco/Indal),complete all as specified and directed.

Materials and Labour for,anodised aluminium snap grid frame work for false ceiling,size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws and including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Materials and Labour for, glazed ceramic coloured tiles, 7mm to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, conforming to IS 15622, economy class, Grade B III, on vertical surface of wall such as dados, skirting etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,complete all as specified and directed.

Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M, in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed

Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M, on vertical surface of wall such as dados, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed

Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.36 SqM but not exceeding 0.42 SqM, in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed

Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.36 SqM but not exceeding 0.42 SqM, on vertical surface of wall such as dados, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed

Materials and Labour for 100 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding etc.,complete all as specified and directed.

Materials and Labour for,cutting out cracks to section of size not exc.10 mm wide and 15 mm depth, in existing roofs or terracing/beams/ lintels/slabs/chajjas/fins/fascia/parapet/walls etc.,cleaning out and filling solidly with a mixture of epoxy reisin and hardener of approved make as per manufacturer's instruction,complete all as specified and directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement including applying two coats of cement-based paint and including priming with alkali resistant priming paint on newly plastered surfaces,complete all as specified and directed.

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, and including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc. and including applying two coats of cement-based paint and including priming with alkali resistant priming paint,complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Material and Labour for preparing old surfaces plastered or unplastered and applying one coat of white wash,on ceiling, complete all as specified and directed.

Material and Labour for complete removal of existing treatment over old surfaces on wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm,complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on new steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of aluminium paint over a coat of aluminium red oxide primer on new steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for, 4 mm thick sheet glass,ordinary quality,ground or obscured or frosted, on one side and glazing with oil putty in square n exc 0.5 sq. m in each pane,including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads,complete all as specified and directed.

Taking up or down, steel tubing 15 mm bore, and connection including cleaning for re-fixing and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as directed.

Taking up or down, steel tubing 20mm bore, and connection including cleaning for re-fixing and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.),complete all as directed.

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Material and Labour for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I , including dismantling existing water tanks and removing to store, complete all as specified and directed.

Material and Labour for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I , including dismantling existing water tanks and removing to store, complete all as specified and directed.

Supply and Fix,ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule,20 mm bore and fixed,complete all as specified and directed.

Disconnecting existing tanks of capacity exceeding 250 Litres but not exceeding 500 Litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.,complete all as directed.

Disconnecting existing tanks of capacity exceeding 1000 Litres but not exceeding 2000 Litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.,complete all as directed.

Supply and Fix in repairs, bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed.

Supply and Fix in repairs, stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,complete all as specified and directed.

Supply and Fix in repairs,brass chromium plated shower rose 125mm size fixed to steel pipe or union 15 mm bore,complete all as specified and directed.

Supply and Fix in repairs,brass CP mixer for mixing hot & cold water screwed down for iron pipe 15 mm bore and fixed,complete all as specified and directed. [Cat No. CON-219KN of Make “Jaquar” or equivalent Model of Make “Marc”/ ”Kohler"/ "Grohe”]

Supply and Fix in repairs, Central Hole Basin Mixer, round spout with Popup Waste assembly with 10 mm dia. 450 mm Long Braided Hose, screwed for iron pipe, 15 mm bore, complete all as specified and directed. [Cat No. CON-169KNB of Make “Jaquar” or equivalent Model of Make “Marc”/ ”Kohler"/ "Grohe”]

Supply and Fix, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.

Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight 45gms), for 32 mm bore discharge pipe,complete all as specified and directed.

Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight 60gms), for 40 mm bore discharge pipe,complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed.

Supply and Fix in repairs,Hand Shower (Health Faucet) with 8 mm bore, 1.2 Metre long PVC tube and wall hook with plastic body,complete all as specified and directed. [Cat No ALD-563 of Make “Jaquar” or equivalent Model of Make “Marc”/”Kohler"/ "Grohe”]

Supply and Fix,grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms), complete all as specified and directed.

Supply and Fix,Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and directed.

Supply and Fix in repairs, vitreous china wash basin, white, flat back, size 550 X 400 mm excluding taps, waste chain and porcelain stopper, but including brackets,complete all as specified and directed.

Supply and Fix in repairs,vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed.

Supply and Fix in repairs,vitreous China bowl urinal, flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.

Supply and Fix PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed.

Supply and Fix, 50 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete all as specified and directed.

Materials and Labour for uprooting of plants/shrubs/vegetation growth of any description on brick walls/parapet walls/chajjas/fascias/shafts etc. in buildings by demolition of brick work or concrete for size 150 mm (L) x 150 mm (B/H) x 200 mm (D) at the position of the roots and making good distrubed portion by providing plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate with and including rendering 10 mm thick, cement plaster, in cement mortar (1:3), finishing surface even and smooth without using extra cement on concrete surface, complete all as specified and directed.

Cleaning of sewage line,100 mm bore, between manhole using the cleaning devices in compliance of Section 5 and protective gear and safety devices in compliance of Section 4 of 'The Prohibition of Employment as Manual Scavengers and their Rehabilitation Act, 2013' and clearing of blockage for clog free flowing of sewage, complete all as specified and as directed. Note:-Center line length of the sewage line excluding the intermediate manhole(s) will be measured.

Cleaning of sewage line,150 mm bore, between manhole using the cleaning devices in compliance of Section 5 and protective gear and safety devices in compliance of Section 4 of 'The Prohibition of Employment as Manual Scavengers and their Rehabilitation Act, 2013' and clearing of blockage for clog free flowing of sewage, complete all as specified and as directed. Note:-Center line length of the sewage line excluding the intermediate manhole(s) will be measured.

Cleaning of sewage line,200 mm bore, between manhole using the cleaning devices in compliance of Section 5 and protective gear and safety devices in compliance of Section 4 of 'The Prohibition of Employment as Manual Scavengers and their Rehabilitation Act, 2013' and clearing of blockage for clog free flowing of sewage, complete all as specified and as directed. Note:-Center line length of the sewage line excluding the intermediate manhole(s) will be measured.

Declogging and cleaning of floor trap/nahani trap/gully trap and clearing of blockage for clog free flowing of waste water, complete all as specified and as directed.

Clearing/uprooting of vegetation,shrub,plant etc. from vertical surfaces and berms of existing strom water drains,and removing spoils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

Desilting of existing drain or channel,culverts etc. by taking out deposited mud, silt, waste etc. form bed, including removing mud, silt, waste etc. to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point, complete all as specified and as directed.

Materials and Labour for concrete bed to drain pipes 300 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 (using 40 mm graded aggregate) complete all as specified and directed.

Repair to pot holes in existing rigid/flexible pavement of dispersal/ runway/ PTT upto 15 mm depth and superficial area not exc.225 sqmm each, cleaning the pot hole with hand brushes or water under pressure and drying with compressed air etc. filling the pot holes with epoxy mixture of araldite and hardener, araldite 02 (Two) parts and hardener 01 (one) parts, complete all as specified and as directed.

Materials and Labour for,cutting out defective portion of existing rigid pavement by mechanical means/manually chesiling, make regular shape and size, depth 25 mm to 36 mm from top surface of slab,removing all debries to a distance exceeding 100 Metres and not exceeding 250 Metres form starting point, loose particle to be cleaned with mechanical air blower,applying a coat of primer uniformly on the horizontal and vertical faces with bristle brush,filling with epoxy resin mortar (1:5) one part of epoxy resin and five parts of Quartz sand as per manufacturer's instructions,on primed surface and finished by means of trowels and flats, finished true levelled with existing adjoining rigid pavement, complete all as specified and directed.

Materials and Labour for, raking out existing joint sealant from Construction/ Dummy joints with using appropriate tools and mechanical means for joints of size 10-12 mm wide and 10 mm deep of sealant,including taking out compressible backer rod of dia 12-15 mm (Total depth 22-25 mm) from joints, cleaning the joints of side, bottom and removing the loose particle of sealant dust etc, with suitable tools and mechanical driven machine, drying the joints surface of moisture completely by means of mechanical driven air blower,applying masking tape both sides of edges of joints to prevent accidental spillage of sealant,applying one coat of primer and insert compressible cross linked polyurethane form back up rod, closed cell, medium density of appropriate dia as per site condition, putting in polyurethane joint sealant of approved make in joints as per manufacturer's instruction, removing masking tape after application of sealant joint and cleaning the surface,complete all as specified and as directed.

Materials and Labour for, raking out existing joint sealant from expansion joints with using appropriate tools and mechanical means for joints of size 20-25 mm wide and 20 mm deep of sealant including taking out compressible backer rod of dia 25-30 mm (Total depth 45-50 mm) from joints, cleaning the joints of sides, bottom and removing the loose particles of sealant dust etc., with suitable tools and mechanical driven machine, drying the joints surface of moisture completely by means of mechanical driven air blower,applying masking tape both sides of edges of joints to prevent accidental spillage of sealant, applying one coat of primer and insert compressible cross linked polyurethane form back-up rod, closed cell, medium density of appropriate dia as per site condition, putting in polyurethane joint sealant of approved make in joints as per manufacturer's instruction, removing masking tape after application of sealant joint and cleaning the surface,complete all as specified and as directed.

Material and Labour for preparation of old painted brick,stone,concrete,asbestos cement or plaster surface and applying one coat of synthetic enamel paint (ordinary tint) on surface of any description,over 10 cm in width or girth, not otherwise described,complete all as specified and directed.

Materials and Labour for preparation of old painted surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, dashes, arrows,figures, letters, etc. on roads, pavements and the like exceeding 10cm wide with one coat of water based runway marking paint (white/ golden/ yellow/orange/black colour),complete all as specified and directed.

Materials and Labour for preparation of old painted surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, dashes, arrows,figures, letters,etc. on roads pavements and the like not exceeding 10cm wide with one coat of water based runway marking (white/ golden/ yellow/orange/black colour),complete all as specified and directed.

Materials and Labour for preparation of old painted surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, dashes, arrows,figures, letters, etc. on roads, pavements and the like exceeding 10cm wide with two coats of water based road marking paint (white/ golden/ yellow/orange/black colour),complete all as specified and directed.

Materials and Labour for preparation of old painted surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, dashes, arrows,figures, letters, etc. on roads, pavements and the like exceeding 10cm wide with one coat of water based acrylic paint (white/ golden/ yellow/orange/black colour),complete all as specified and directed.

Supply only Calcium based white/ off white free flowing granular disinfectant chlorination chemical with 65% to 70% chlorine content, decomposing at 177 Degree Centigrade, Molecular weight 142.98, toxicity oral rate LD 50: 850 mg/Kg, in sealed HDPE 45 Kg containers,complete all as specified. Notes:- (i) Materials shall be delivered to AGE E/M Store and receipt voucher obtained. (ii) The Contractor shall produce Manufacturer’s “Certificate of Compliance” indicating date of manufacture in original alongwith each consignment of supply. (iii) Test Certificate from Govt approved Test Laboratory shall accompany with each consignment of supply to ensure that the materials supplied are in conformity with the relevant IS Code.

Supply only bleaching powder of grade conforming to IS-1065 – 1989 (2nd Revision) minimum markable chlorine 33.5% by mass, packed in HDPE bag of 25 Kgs,complete all as specified. Notes:- (i) Materials shall be delivered to AGE E/M Store and receipt voucher obtained. (ii) The Contractor shall produce Manufacturer’s “Certificate of Compliance” indicating date of manufacture in original alongwith each consignment of supply. (iii) Test Certificate from Govt approved Test Laboratory shall accompany with each consignment of supply to ensure that the materials supplied are in conformity with the relevant IS Code.

Taking out coagulated sludge from underground, RCC sedimentation tank/sump of 26,000 Litres capacity, removal of sludge to a distance not exceeding 50 Metres away from the periphery of the tank and spread where directed, including washing down thoroughly the walls and bottom of sedimentation tank/sump and applying evenly lime soda solution and again washing down thoroughly with clear water and including complete draining off of accumulated water inside the tank/sump,after complete removal of sludge inside the tank/sump,complete all as specified and directed. Note:- The quoted rate shall be deemed to be inclusive for obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work, writing letters or figures (Block,Roman, Italic or Indian) n exc. 30 cm high and writing symbols (stops, commas, short lines, dashes,hyphens, brackets, etc.) with synthetic enamel paint for writing/marking tank/sump capacity, date of cleaning etc.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil , complete all as specified and directed.

Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

Locating fault in existing LT (1100 Volts Grade) underground cable network by means of cable fault locator with fault-distance accuracy less than 0.75 M (depending on displayed range) with computer-controlled automatic sectionalizing and fault locating with a simple “turn and click” operation and submission of report to Engineer in Charge, complete all as specified and directed.

Locating fault in existing HT (11000 Volts Earthed) underground cable network by means of cable fault locator with fault-distance accuracy less than 0.75 M (depending on displayed range) with computer-controlled automatic sectionalizing and fault locating with a simple “turn and click” operation and submission of report to Engineer in Charge, complete all as specified and directed.

Supply, laying, jointing and testing of LT, XLPE insulated, PVC sheathed,armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 16 Sq. mm, 2 core including taking out existing unserviceable cables,1100 Volts grade from trenches/ducts/ poles etc.,complete all as specified and directed.

Supply, laying, jointing and testing of LT, XLPE insulated, PVC sheathed,armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 16 Sq. mm, 4 core including taking out existing unserviceable cables,1100 Volts grade from trenches/ducts/ poles etc.,complete all as specified and directed.

Materials and Labour for Straight Through Joints, tubular sleeve type, for 1.1 KV Grade, underground cable including jointing kits and accessories complete for making joints, suitable for 3/3 ½ /4 core XLPE armoured, aluminium conductor cable, of size 70 sq. mm to 150 sq. mm, complete all as specified and directed. [Kit No.EPKJ 0137 of Make 'Raychem' or equivalent Model of Make M-Seal/3M]

Supply and Fix,cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm,complete all as specified and directed.

Supply and Fix in repairs,switches air break, gang operated, triple pole, mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating up to 200 Amp, 11000 Volts Grade, complete all as specified and directed.

Supply and filling in dry sand in cable trenches before and after the cables are laid, as in sand cushioning to cables complete all as specified and directed.

Laying Only,bricks in cable trenches, as cable protection complete all as specified and directed. Note:- Old bricks obtained from taking out unserviceable cable shall be re-used.

Comprehensive maintenance including minor repairs and replacement of gasket set, cleaning engine head, piston with ring, cleaning of fuel tank and replacement of minor parts of DG set of capacity 15 KVA with AMF panel and acoustic enclosure through OEM Certified Agencies as approved by Engineer in Charge including the following works:- (i) Replacement of fuel filter dual type-01 Set. (ii) Replacement of oil filter-01 Set. (iii) Cleaning and refixing of air filter complete-01 Set. (iv) Checking of serviceability of turbocharger complete-01 Set. (v) Checking of battery lead serviceability and repl of bty terminal clamp (Brass)=4 Each. (iv) Checking of alternator terminal box output lead connectors for its proper fixing/tighteniness & correct voltage. (v) Checking of contactor auto/mannual operation mode in AMF panel and testing of DG set complete for its proper functional all as specifed and as directed by Engr-In-Charge. (vi) Engine oil, viscosity Grade 20W-40 (Make: Castrol/Bosch/Servo/Gulf) -5 Litres (Supplied in sealed HDPE containers of 3 Litres/5 Litres/20 Litres) (vii) Glycol based antifreeze radiator coolant (Make: Castrol/Bosch/Valvoline) -1 Litres (Supplied in sealed HDPE containers of 1 Litres/2 Litres/5 Litres.) (viii) Distrilled Water-1 Litre (Supplied in sealed PET bottles of 1 Litres/2 Litres)

Comprehensive maintenance including minor repairs and replacement of gasket set, cleaning engine head, piston with ring, cleaning of fuel tank and replacement of minor parts of DG set of capacity 35 KVA with AMF panel and acoustic enclosure through OEM Certified Agencies as approved by Engineer in Charge including the following works:- (i) Replacement of fuel filter dual type-01 Set. (ii) Replacement of oil filter-01 Set. (iii) Cleaning and refixing of air filter complete-01 Set. (iv) Checking of serviceability of turbocharger complete-01 Set. (v) Checking of battery lead serviceability and repl of bty terminal clamp (Brass)=4 Each. (iv) Checking of alternator terminal box output lead connectors for its proper fixing/tighteniness & correct voltage. (v) Checking of contactor auto/mannual operation mode in AMF panel and testing of DG set complete for its proper functional all as specifed and as directed by Engr-In-Charge. (vi) Engine oil, viscosity Grade 20W-40 (Make: Castrol/Bosch/Servo/Gulf) -12 Litres (Supplied in sealed HDPE containers of 3 Litres/5 Litres/20 Litres) (vii) Glycol based antifreeze radiator coolant (Make: Castrol/Bosch/Valvoline) -2 Litres (Supplied in sealed HDPE containers of 1 Litres/2 Litres/5 Litres.) (viii) Distrilled Water-2 Litres (Supplied in sealed PET bottles of 1 Litres/2 Litres)

Comprehensive maintenance including minor repairs and replacement of gasket set, cleaning engine head, piston with ring, cleaning of fuel tank and replacement of minor parts of DG set of capacity 320 KVA with AMF panel and acoustic enclosure through OEM Certified Agencies as approved by Engineer in Charge including the following works:- (i) Replacement of fuel filter dual type-01 Set. (ii) Replacement of oil filter-01 Set. (iii) Cleaning and refixing of air filter complete-01 Set. (iv) Checking of serviceability of turbocharger complete-01 Set. (v) Checking of battery lead serviceability and repl of bty terminal clamp (Brass)=4 Each. (iv) Checking of alternator terminal box output lead connectors for its proper fixing/tighteniness & correct voltage. (v) Checking of contactor auto/mannual operation mode in AMF panel and testing of DG set complete for its proper functional all as specifed and as directed by Engr-In-Charge. (vi) Engine oil, viscosity Grade 20W-40 (Make: Castrol/Bosch/Servo/Gulf) -28 Litres (Supplied in sealed HDPE containers of 3 Litres/5 Litres/20 Litres) (vii) Glycol based antifreeze radiator coolant (Make: Castrol/Bosch/Valvoline) -5 Litres (Supplied in sealed HDPE containers of 1 Litres/2 Litres/5 Litres.) (viii) Distrilled Water-15 Litres (Supplied in sealed PET bottles of 1 Litres/2 Litres)

Overhauling of Self Starter 12 Volts by opening up,cleaning of parts, lubrication and replacement of defective parts including re-assembling all as required for smooth functioning of self starter of the DG Set of capacity 15/35 KVA,complete all as specified and directed. Notes:- (i) Cost of minor spares such nuts,bolts,screws,washers, insulation sleeves, lugs,lubricants etc. required for maintenance shall be deemed to be included in the unit rate quoted. (ii) Spares required to be replaced shall be measured and paid separately under relevant items. (iii) Spares replaced shall be guaranteed for two years. (iv) Self starter shall be tested in presence of Engineer in Charge and the cost of testing shall be deemed to be included in the quoted rates.

Overhauling of Self Starter 24 Volts by opening up,cleaning of parts, lubrication and replacement of defective parts including re-assembling all as required for smooth functioning of self starter of the DG Set of capacity 320 KVA,complete all as specified and directed. Notes:- (i) Cost of minor spares such nuts,bolts,screws,washers, insulation sleeves, lugs,lubricants etc. required for maintenance shall be deemed to be included in the unit rate quoted. (ii) Spares required to be replaced shall be measured and paid separately under relevant items of this BOQ. (iii) Spares replaced shall be guaranteed for two years. (iv) Self starter shall be tested in presence of Engineer in Charge and the cost of testing shall be deemed to be included in the quoted rates.

Overhauling of Alternator 12 Volts by opening up,cleaning of parts, lubrication and replacement of defective parts including re-assembling all as required for smooth functioning of alternator of the DG Set of capacity 15/35 KVA,complete all as specified and directed. Notes:- (i) Cost of minor spares such nuts,bolts,screws,washers, insulation sleeves, lugs,lubricants etc. required for maintenance shall be deemed to be included in the unit rate quoted. (ii) Spares required to be replaced shall be measured and paid separately under relevant items of this BOQ. (iii) Spares replaced shall be guaranteed for two years. (iv) Alternator shall be tested in presence of Engineer in Charge and the cost of testing shall be deemed to be included in the quoted rates.

Supply Only, rectifier set for alternator,12 Volts as per OEM's specifications.

Supply Only,armature for self starter,12 Volts as per OEM's specifications.

Supply Only,brushes for self starter,12 Volts as per OEM's specifications.

Supply Only,soleniod for self starter,12 Volts as per OEM's specifications.

Supply Only,plunger for self starter,12 Volts as per OEM's specifications.

Supply Only,Lever Fork for self starter,12 Volts as per OEM's specifications.

Supply and Fix in repairs, maintenance free lead acid battery,12 Volts,capacity 180 Ah,suitable for DG Set including provision of brass terminals for connection,complete all as specified and directed. [Model : Xpress (XP1800) of Make'Exide'or equivalent Model of Make 'Amron'/'Amco']

Supply and Fix in repairs, LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. [Cat No. LSTS-36-CDL-M of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE' ]

Supply and Fix in repairs, LED foodlight luminaire,120 Watts,with pressure die-cast aluminium housings powder coated, control gear compartment, pressure die-cast aluminium frame powder coated with toughened glass,CRI >70, CCT 5700 °K, Power Factor >95%, THD <10%, Driver Effciency >85%, lumen efficacy >110 Lm/W, AC input voltage 120V-270V, surge protection 4 KV internal & 10 KV external and degree of protection IP 66,complete all as specified and directed. [Cat No. LFLN-120-CDL/60-M of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE' ]

Supply and Fix in repairs, LED foodlight luminaire,150 Watts,with pressure die-cast aluminium housings powder coated, control gear compartment, pressure die-cast aluminium frame powder coated with toughened glass,CRI >70, CCT 5700 °K, Power Factor >95%, THD <10%, Driver Effciency >85%, lumen efficacy >110 Lm/W, AC input voltage 120V-270V, surge protection 4 KV internal & 10 KV external and degree of protection IP 66,complete all as specified and directed. [Cat No. LFLN-150-CDL/60-M of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE' ]

Supply and Fix in repairs,moulded case circuit breakers (MCCBs),conforming to IEC 60947-2& IEC 60947-2, AC 415V, 4 pole, with current rating 100 Amps and 18 KA breaking capacity Icu at 415V, AC, 50Hz, with adjustable Over Load setting: 0.8 - 1.0 x In,complete all as specified and directed. [Cat No. CM90518OOKO of Make “L&T” or equivalent Model of Make Siemens/Schneider/ ABB.]

Supply and Fix in repairs,moulded case circuit breakers (MCCBs),3 Pole, 415 V, adjustable type, 630 Amps with breaking capacity 50 KA,complete all as specified and directed. [Cat No. CM94004OOT1OG of Make “L&T” or equivalent Model of Make Siemens/Schneider/ ABB.]

Supply and Fix in repairs, On Load Change Over Switch,open execution, Four Pole, Current Rating 100 Amps, conforming to IS 13947 (Part 3)-1993; IEC: 60947-3, complete all as specified and directed. [Cat No.CO11000OOOD of Make “L&T” or equivalent Model of Make Siemens/Schneider/ ABB.]

Materials and Labour for,25 mm bore, galvanized steel tubing, medium grade, with all fittings, fixed complete to walls and ceilings or laid in floors,including taking up or down existing steel tubing ,complete all as specified and directed.

Materials and Labour for,40 mm bore, galvanized steel tubing, medium grade, with all fittings, fixed complete to walls and ceilings or laid in floors,including taking up or down existing steel tubing ,complete all as specified and directed.

Materials and Labour for,50 mm bore, galvanized steel tubing, medium grade, with all fittings, fixed complete to walls and ceilings or laid in floors,including taking up or down existing steel tubing ,complete all as specified and directed.

Supply and Fix, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 25 mm bore, complete all as specified and directed

Supply and Fix, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 40 mm bore, complete all as specified and directed

Supply and Fix, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 50 mm bore, complete all as specified and directed

Disconnecting electrical connections carefully from the penal board/starter and lifting of submersible pump motor of any capacity including column pipe with all accessories, from existing bore well ,complete all as specified and directed. Note:- Submersible pump motor and all accessories shall be deposited to AGE E/M Store and receipt voucher obtained.

Disconnecting all necessary connections for carrying out repairs and taking down carefully outdoor unit of existing split type AC 1.5/2.00 Ton capacity, cleaning throughly the parts,replacing defective parts, re-fixing in position including testing for satisfactory working conditions and commissioning,complete all as specified and directed. Note : Spares will be measured and paid separately.

Servicing/Cleaning of existing Split Type AC by opening the indoor & outdoor units, cleaning of filters, removing of dust, checking of all parts etc. complete all as specified and directed.

Dismantaling of fan motor from outdoor unit of existing split type AC 1.5/2.0 Ton,removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding motor with super enamelled copper wires of existing size/gauge including provision of all insulating materials,lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling,including testing and commissioning, complete all as specified and directed.

Supply Only,condenser coil assembly complete suitable for 1.5 / 2 ton window/ split type AC as per OEM's specifications.

Supply Only evaporator coil assembly complete suitable for 1.5 / 2 ton Window / Split type AC as per OEM's specifications.

Supply,istallation,testing and commissioning of sealed compressor including charging of refrigerant gas, leak testing etc.,suitable for outdoor unit of Split type AC of 1.5 Ton capapicy as per OEM's specifications including taking down carefully existing unserviceable compressor, complete all as specified and directed.

Supply Only, running capacitor 36/45 Mfd 440V AC 50 Hz for outdoor unit of Split type AC of 1.5/2.0 Ton capapicy as per OEM's specifications.

Supply Only,Fan motor capacitor 4 / 6 Mfd 440V AC 50 Hz for outdoor unit of Split type AC of 1.5/2.0 Ton capapicy as per OEM's specifications.

Supply only Air filter suitable for split /window type AC,1.5 TR capacity as per OEM's specifications.

Supply only, Start Relay for compressor of Window/Split type AC of 1.5/2.0 Ton capapicy as per OEM's specifications.

Supply Only, thermostat of Window/Split type AC of 1.5/2.0 Ton capapicy as per OEM's specifications.

Supply and Fix in repair, fan motor for out door unit of 1.5 TR/ 2 Ton capacity split type AC as per OEM's specifications.

Supply and Fix in repair,Copper pipe 5 /8" complete with insulation as per OEM's specifications for interconnection of indoor and outdoor units of split type ACs.

Supply and Fix in repair,Copper pipe 3 /8" complete with insulation as per OEM's specifications for interconnection of indoor and outdoor units of split type ACs.

Supply and charging of refrigerant R-22.

Supply and Fix in repairs,bell push, flush type, single pole, 5 Amps, complete all as specified and directed.

Supply and Fix in repairs,stepped type electronic fan regulator, flush type, on existing phenolic laminated sheet etc. as required , complete all as specified and directed.

Supply and Fix in repairs,Ceiling Rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed.

Supply and Fix in repairs,Lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and directed.

Supply and Fix in repairs, Modular Switch, one way, 6 Amps, 1 Module, complete all as specified and directed.

Supply and Fix in repairs, Modular Switch, one way, 16 Amps, 1 Module, complete all as specified and directed.

Supply and Fix in repairs, Modular Socket, 6 Amps, 2/3 Pin, 2 Module, complete all as specified and directed.

Supply and Fix in repairs, Modular Socket 6A/16A - 2/3 pin combined 2 module,complete all as specified and directed.

Supply and Fix in repairs, Bell Ding Dong, AC 230 volts,single pole, complete all as specified and directed.

Supply and Fix in repair,LED batten with fire retardant poly carbonate housing and opal polycarbonate diffuser, with white LEDs,1X20 W,lumen efficacy 100lm/W, with electronic driver complete with all accessories internally pre wired,including lamp,complete all as specified and directed. [Cat No. LCTLN-20-CDL of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE' ]

Supply and Fix in repair,9 Watts retrofit LED Lamp (Spiral B-22 base),complete all as specified and directed. [Cat No. LHLDEUEEMC8R009 of Make 'Havells' or equivalent Model of Make 'Wipro'/'Philips'/'GE'/'Crompton Greaves']

Supply and Fix in repair,18 Watts LED PL-L,high efficacy,suitable for installation in existing 2G11 lamp holders,complete all as specified and directed. [Cat No. PHOTONULTRA PLL419TL18WLED865SPC of Make 'Havells' or equivalent Model of Make 'Wipro'/'Philips'/ 'GE'/'Crompton Greaves']

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including PVC casing and capping and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 2.50 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for sub main including taking down carefully existing unserviceable sub main wiring of any size (2 runs single core including earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc.,of any size (2 runs single core including earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed.

Supply and fix miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, 6 to 32 Amps complete all as specified and directed. [Cat No. 4085 87-4085 95 of Make Legrand or equivalent Model of Make L&T/Hager/ Seimens/ GE/Schneider/ABB]

Supply and fix miniature circuit breaker (MCBs) single pole and neutral, 240 Volts, 10KA, 6 to 32 Amps complete all as specified and directed. [Cat No. 4086 09-4086 17 of Make Legrand or equivalent Model of Make L&T/ Hager/ Seimens/ GE/Schneider/ABB]

Taking down carefully ceiling fan 1200 mm/1400 mm sweep, dismantaling of parts, removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding fan motor with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, hanging in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Repairs and rewinding woks shall be carried out through authorised technicians of the OEMs as approved by GE. (ii) Spares for replacement will be measured and paid separately.

Taking down carefully exhaust fan 300 mm/450 mm size, dismantaling of parts, removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding fan motor with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, fixing in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Repairs and rewinding woks shall be carried out through authorised technicians of the OEMs as approved by GE. (ii) Spares for replacement will be measured and paid separately.

Supply Only,Gun Metal Bushing/Sleeve Bearing of suitable for shaft size.

Supply Only,Capacitors for electric fan motors, 2.5 mfd, 440 V conforming to IS:1709 (Cat No. QHPCWC5002X5 of Make Havells or equivalent Model of Make UNIVERSAL/EPCOS)

Supply Only,Capacitors for electric fan motors,3.15 mfd conforming to IS: 1709 (Cat No. QHPCWC5003X1 of Make Havells or equivalent Model of Make UNIVERSAL/EPCOS)

Supply Only,Chrome Steel Ball Bearing,size 6201/6202 for ceiling fan as per OEMs specifications. (Make: TATA/NBC/SKF)

Supply only, chrome steel ball bearings, size 6001/6002 for exhaust fan as per OEMs specifications. (Make: TATA/NBC/SKF)

Taking down carefully, existing defective storage type water heater (geyser) of Capacity 25/50 Litres of any Make for repairing, including replacement of defective spares as required including descaling of storage tanks internally, brazing of leakage if any in tanks and including replacement of terminals with defective connection wires and reinstallation of the geyser in original position including testing and commissioning,complete all as specified and directed. NOTES:- (i) Repairs shall be carried out through authorised technicians of the OEMs as approved by GE. (ii) Spares for replacement will be measured and paid separately.

Supply Only,Thermostat, stem type, adjustable upto 75 Degree Celcius, ISI Marked (IS 3017).

Supply Only,Heating Element, 1500 Watts for geyser as per OEMs specifications.

Supply Only,450 mm long,PVC Hot/Cold water connections,15mm size,with brass nuts .

Supply Only,450mm long, braided hose with two 15mm Nuts & rubber washers,suitable for Geysers. [Cat No. ALD-805B of Make'Jaquar' or equivalent Model of Make'Parryware'/'Hindware']

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel earth lead strip 32 mm x 6 mm by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced 8 mm dia TMT bars @ 150 center to center both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR Part –I .

M/S LAKSHMI COOLING CENTRE