SUPPLY OF MACHINERY AND TOOLS FOR VARIOUS PARKS AT KALKAJI, WARD NO. 175, CENTRAL ZONE.

Diesel Lawn Mower (Roller/Cylinder Type) — Engine: 5 HP, 4-stroke, single cylinder, air cooled diesel engine (Greaves/Kirloskar/Petter make), 3600 RPM, manual recoil start, fuel tank capacity approx. 2.5–3 litres; Body Frame: 5mm heavy-duty MS steel frame; Cutting Cylinder: heavy-duty 6-blade cutting cylinder running on heavy-duty ball bearings, blades of high carbon/alloy steel, hardened & tempered; Bottom Blade: alloy steel, specially strengthened with lipped cutting edge; Cutting Width: 20"/24"/30" (500/600/750mm); Cutting Height: adjustable from 3/4" to 2" (19mm to 50mm) via front roller; Front Roller: heavy-duty tubular seamless steel pipe roller on ball bearings; Rear Roller: large-diameter non-skid cast iron/steel roller with built-in ratchet; Transmission: V-belt & roller chain drive; Clutch: heavy-duty spring-loaded automatic clutch, lever-operated on handle; Handle: all-steel heavy-duty handle with rubber grip, height adjustable; Grass Box: large capacity, easily detachable; Cutting Capacity: 0.75 to 2 acres per hour; Approx. Weight: 150–180 kg (size dependent); Colour: Green (standard); Ideal Use: large lawns, parks.

Brush Cutter Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY ENGINE DISPLACEMENT: 40.2CC Power Output: 2Kw/2.7HP Max Output shaft speed at cutting attachment: Should be minimum 9000 RPM CARBURETOR: Diaphragm with compensator technology. Fuel Tank Capacity: Minimum 600 ml. WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 Kg CLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only. MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right handle. BRUSHCUTTER HARNESS: Should be double shoulder harness only. ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system. Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2 Sound Pressure Level Db(A): Should not be more than 105 dB(A) Drive shaft design: Must have drive shaft ends square design type only. Certification : Must have valid EN Certificaton

Chain Saw Engine : SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY Displacement: 45.4CC POWER OUTPUT : 2.3Kw. 3.0 HP Max.engine speed (with guide bar & chain ): At least 12500 RPM Carburetor: Diaphragm type & compensator technology. Fuel tank capacity: Should be minimum 450 ml. Dry weight( without cutting attachment ): Should not be more than 5.0 KG Clutch: Clutch shoe LININING metal ONLY. Guide Bar Design: Should be Rollomatic type. Guide Bar Length: Guide bar length must have 50 cm/20" inch. Guide bar and Chain: Should have same manufacture only. Chain Type: Every drive link require groove & small oil receiver hole for better Lubrication. 0.325 inch Pitch & 1.6 mm thickness only. chain Lubrication System: Fully automatic ,speed controlled rotary oil pump Chain oil tank capacity: Should be minimum 200 ml. Oil Pump Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable. Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off. Guaranteed Sound power level: Should not be more than115 Db(A) Maximum chain velocity to ISO 11681: Should be minimum 28 m/s Certification: Product should have valid DPLF certificate with test standard EN ISO 11681.

Looper : High Carbon Steel Cutting Dia:60 mm Handle : Stainless Stell With Comfortable rubber grip and extendable Weight : Not more than 2 Kg

PVC Pipe Supply PVC Pipe MADE OF Nylon with Braiding, Inner Diameter 30 mm, Length of Coil 30 Mtr. & Wall Thickness 3 mm up of 1st grade PVC (As per Sample)

S/o Bamboo Broom with handle (5’ to 5.5’) iron ring of good quality with bamboo stick

S/o Enamel, Synthetic, Exterior Under Coating Confirming to IS 2932 20 litre

Pole Pruner Supply of Telescopic Pole Pruner:- Specification:- Pole length incuding blade: 6.5m Blade Material: Hardened & Tempered high carbon steel .The head of the blade shall have a hooked tip useful for cutting twigs Saw Blade Shape: Hooked type curved saw blade Type & no of cutting teeth :Tripple grounded 86 teeth Blade Length : 15"-16" Pole type: Light weight telescopic tubular aluminium alloy extendable pole No of positions for pole Height Adjustment : 10 positions Locking Mechanism : Ergonomicvally designed two way locking mechanism Total Working length : Max 21'9"(6623 mm), MIn 10'3" (3103mm) Branch cutting capacity: 200mm max

HDPE Palli of size 6’X6’ of good quality

Manual Tree Prunner blade: 6.5m Blade Material: Hardened & Tempered high carbon steel .The head of the blade shall have a hooked tip useful for cutting twigs Saw Blade Shape: Hooked type curved saw blade Type & no of cutting teeth :Tripple grounded 86 teeth Blade Length : 15"-16".