Construction of 100 Bedded Hostel at Residential boys High School, Sakhuapani, Bishunpur, Gumla

Jharkhand State Building Construction Corporation Limited Regd. Office: - Building Construction Department, Govt. of Jharkhand, Project Building, P.O. - Dhurwa, Ranchi-834004, Jharkhand Phone No.:- 0651-2446257/2446258/2446259, e-mail:[email protected]

NAME OF WORK : - PROPOSED CONSTRUCTION OF 100 BEDDED HOSTEL AT ST RESIDENTIAL BOYS HIGH SCHOOL SHAKUAPANI, BISHUNPUR, GUMLA.

Name of Agency/Supplier/Contractor

Sl. No Item. Item Description. Unit Rate

Non -Scheduled item

1 M.R Supplying and placing of Single bed with Frame of MS Hollow Rectangular /Square Section of size:Length-2030mm,Width-915mm,Height-450mm,Material of Head board:MS ERW Tube IS: 7138 Square tube of 38.1mmX1.2 mm Thick ,Material of mattress panel:Plywood,Thickness of matress panel :12 mm,Colour of bed (steel frame):Brown ,Size of Rectangular Hollow section :50mmX25mm,Size of square Hollow section :40 mmX40 mm, Size of circular Hollow section :20mm,Thickness of Hollow Section :1.2mm,Size of support members :25X25(mm),Number of support members:4, Paint/Finish of MS parts: Powder coating,Min powder/paint coating thickness (micron):50 micron all complete as per direction of the officer-in-charge. EACH

2 M.R Supplying & Placing Computer Desk of size 1200mm(W) X 600mm(D) X 750mm(H). It should have work top made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile shall be in rectangle shape and the edges sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The desk shall be clad with 18mm thick modesty panel which provide structural support for the desk. It should be 18mm thick pre-laminated particle board connected with both end. At one side a fixed pedestal shall be provided with 3 drawer. The drawer shall be operated on roller channel and ball bearing channel to enable smooth operation. The drawer shall be operated with Al die cast handle with central locking mechanism in which all the drawers shall be locked with single key. Drawer facai, sides and all other shall be made in 18mm thick Pre-laminated particle board with appropriate edge banding and drawer base shall be 9mm thick. To protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided at bottom of the pedestal at both sides. EACH

3 M.R Supplying & Placing Café Chair, Chrome Plated Pipe Frame, Leatherette Tapestry Chair Armrest Without Type of seat Ply Seat Cushion With Back Rest Cushion with Upholstery Leatherite Material of frame SS 304 Chair height (overall) ±10mm 850mm Backrest width ±10mm 380 Width of seat ±10mm 350 Depth of seat in mm (+/- 10 mm) 400 Height of seat in mm (+/- 5 mm) 400 Seat Finish Cushioned Exposed Wooden / Metal Parts Finish N.A EACH

4 M.R Supplying & Placing Stainless Steel Rectangular Dining Table with Round fixed Chair of specification:Table top / Chair seat / bench seat material:Stainless steel Grade 202 galvanized,Table top / Chair seat / bench seat thickness: 0.8 mm,Leg material for Table and Chair/bench: Stainless steel Grade 202 galvanized,Wall thickness of Leg material (for Table and Chair/bench):0.8 mm Support material for Table and Chair/bench:Stainless steel Grade 202 galvanized,Backrest material for Chair/bench:No backrest,Table - Chair/bench attaching material:MS ERW tubes conforming to IS : 7138 - latest,Product Configuration:Provision for 8 - persons,Mode of supply:Assembled Ready To Use,Table Foot rest:All four sides along the width and depth both.,Chair/bench back rest Without Support for Table top:Widthwise support,Number of support for Table top:1 no.,Support for chair/bench seat Depthwise support:Width of table ± 10 mm,:2150 for 8-seater,Chair/bench Leg size ± 2 mm:25 mm Dia,Size of support pipes/square sections (for table): 25 mm (dia),Size of support pipes/square sections (for chair/bench):15 mm Dia EACH

5 M.R Providing, supplying and placing steel Almirah. The overall size of the Almirah shall be 900mm (W) X 450mm (D) X 1830mm (H). The cabinet shall be supplied with 2 nos. of doors and 4 nos. of adjustable shelves. The doors shall be operated with aesthetically appealing snap fit ABS plastic handle and concealed crank hinge. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity of each shelf shall be 40 Kg maximum. Each rack shall be provided with stiffener at bottom for strength. The entire body panel, shelf shall be made of high yield strength 0.8mm thick CRCA sheet of grade ‘D’ confirming to IS: 513. To protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the Almirah. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-60µ thick EACH

6 M.R Supplying & Placing Drinking water palteform Approximate External Dimensions (WXDXH) 750 x 690 x 1420 mm Input Voltage 230 V AC (50 Hz) Power Rating (Max) 850 ± 10% Water Storage Tank Capacity 120 Litre Cooling Capacity 60 LPH Output Water Temperature 15°C±1°C Refrigerant HFC R 134 a Thermal Insulation for Storage Tank PUF No. of Faucets 3 Cold No. of Stages for Filter cum Purifier 7 Active Copper Zinc Booster Yes % of Purified Water Recovery 25% % Rejection of TDS 90% (Approx) Permeate (Purified Water) Production Capacity 50 LPH Storage Tank & Drain Tray Material SS 304 Outer Body Material rest CRCA Powder Coated Steel Front Panel SS 304 and Type of Product Construction Concealed Type of Installation Indoor Net Weight 92 Kg Operating Input Water Pressure 1.0 to 2.0 Kg/cm² Operating Temperature 10°C to 40°C Recommended Total Dissolved Solids in Input Water(TDS) 500 to 2000 ppm.(Max) Recommended Hardness in Input Water 300 ppm(Max) Recommended pH of Input Water 6.5 to 8.5 Allowable Chlorine Input Water 0.2 ppm (Max) Allowable Iron in Input Water 0.3 ppm (Max) Turbidity <5 NTU EACH