REPAIR AND RESTORATION TO CERTAIN STEEL FURNITURE UNDER GE NB VISAKHAPATNAM

Amount

TABLE OFFICE OFFICER STEEL,FD-1003 Removing the existing unserviceable top from table office officers steel carefully an supply and fixing new top of size 1680mmx870mm made of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

Removing the existing unservicable /rusted drawer complete from table office officer steel and supply and fixing new drawer made of 1mm thick MS sheet all as per size and dimension Complete all as directed and shown on drawing.

Removing the existing unserviceable lock from drawers and shutters of table office officers steel and supply and fixing new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Continous gas welding /Running welding in repairs to all broken joints of table of thickness metal not execceding 6mm complete all as specified and as directed. Note All Steel furniture welding shall be measured and paid under this item

Removing the old broken PVC shoes from the legs of table,Supply and fixing new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom complete all as specified and as directed,. Note All Steel furniture shoes shall be measured and paid under this item

Material and labour for painting each table office officer steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying two coats of hammer tone paint as per existing shade / shade as directed by Engineer-in-charge to both external and internal surfaces to complete table using spray paint machine complete all as specified and as directed.

TABLE OFFICE CLERK STEEL,FD-84(M)/1004 Removing the existing unserviceable top from table office clerk steel carefully;supply and fixing new top of size 1200mmx610mm made of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

Removing the existing unservicable /rusted drawer complete from table office officer steel and supply and fixing new drawer made of 1mm thick MS sheet all as per size and dimension Complete all as directed and shown on drawing.

Material and labour for painting each table office clerk steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying two coats of hammer tone paint as per existing shade / shade as directed by Engineer-in-charge to both external and internal surfaces to complete table using spray paint machine complete all as specified and as directed.

TABLE STEEL 900X900X760MM,FD-1009 Removing the existing unserviceable top from table steel carefully;supply and fixing new top of size 900mmx900mm made of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

Removing the existing unserviceable leg from the table steel carefully by cutting the welded ends with hand held machine and supply and fixing new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position and the welded surface shall also be grinded to make the spots and surface smooth complete all as specified and as directed.

Removing the existing unserviceable top rail from the table carefully by cutting the welded ends with hand held machine and supply and fix new rail made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position and the welded surface shall also be grinded to make the spots and surface smooth complete all as specified and as directed.

Material and labour for painting each table steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying two coats of hammer tone paint as per existing shade / shade as directed by Engineer-in-charge to both external and internal surfaces to complete table using spray paint machine complete all as specified and as directed.

LOCKER STEEL,FD-257/1029 Removing the existing unserviceable/damaged door shutter carefully by removing the hinges and supply and fixing new shutter made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing the existing unserviceable/damaged shelf carefully by removing the rivets and welding spots and supply and fixing new shlef made of 1 mm thick MS sheet of same size and shape complete all as specified and directed and shown on drawing.

Removing the existing unserviecable rusted conduit pipe from the side flanges, Supply and fixing new 20mm dia conduit pipeof wall thickness 1mm along with side flanges. Complete all as specified and directed and shown on drawing.

Removing the existing unserviceable handle from the lockers steel and supply and fixing new 100mm long chromium plated steel handle of ISI marked with riveting to steel shutters ,Complete all as directed and shown on drawing.

Removing the existing unservisable hasp and staple from locker steel and supply and fixing new hasp and staple of size 75mmx40mm of 3mm thickness with riveting to steel shutters complete all as specified and as directed and as shown on drawing.

Removing the existing unserviceable leg from bottom of lockers carefully by unriveting and using hand held cutting machine without damaging the other parts and supply and fixing new leg made of 1mm thick MS sheet of existing shape and size to the existing place through welding and riveting complete all as specified and as directed and as shown on drawing.

Material and labour for painting each locker steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying two coats of hammer tone paint as per existing shade / shade as approved by Engineer-in-charge to external and internal surfaces to complete locker using spray painting machine complete all as specified and as directed.

ALMIRAH LARGE STEEL,FD-67(M)/ 1031 Removing the existing unserviceable/damaged door shutter carefully by removing the hinges and supply and fixing new shutter made of 1 mm thick MS sheet of same size and shape of almirah large steel complete all as directed and shown on drawing.

Removing the existing unserviceable/damaged shelf carefully by removing the rivets and welding spots and supply and fixing new shlef made of 1 mm thick MS sheet of same size and shape complete all as specified and directed and shown on drawing.

Removing the existing unserviceable/damaged bottom portion carefully by removing rivets and welding spots and supply and fixing new bottom made of 1 mm thick MS sheet of same size and shape c0mplete all as specified as directed and shown on drawing.

Removing the existing unserviceable lock from shutters of almirah large steel and supply and fixing new 6 lever lock with duplicate keys complete all as specified and as directed and shown on drawing. Make of Locks-Godrej/Harrison/Link Note All Steel almirah locks shall be measured and paid under this item

Removing the existing unserviceable leg from bottom of Almirah large carefully by unriveting and using hand held cutting machine without damaging the other parts and supply and fixing new leg made of 1mm thick MS sheet of existing shape and size to the existing place through welding and riveting complete all as specified and as directed and as shown on drawing.

Material and labour for painting each almirah steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying two coats of hammer tone paint as per existing shade / shade as approved by Engineer-in-charge to external and internal surfaces to complete locker using spray painting machine complete all as specified and as directed.

Removing the existing unserviceable handle from the Almirah medium / large steel and supply and fixing new 130mm long chromium plated handle of ISI marked to steel shutters, Complete all as directed and shown on drawing. Note All Steel almirah handles shall be measured and paid under this item

ALMIRAH STEEL MEDIUM WITH SHELVES,FD-67(M)/1032 Removing the existing unserviceable/damaged door shutter carefully by removing the hinges and supply and fixing new shutter made of 1 mm thick MS sheet of same size and shape of almirah steel medium complete all as directed and shown on drawing.

Removing the existing unserviceable/damaged shelf carefully by removing the rivets and welding spots and supply and fixing new shlef made of 1 mm thick MS sheet of same size and shape complete all as specified and directed and shown on drawing.

Removing the existing unserviceable/damaged bottom portion carefully by removing rivets and welding spots and supply and fixing new bottom made of 1 mm thick MS sheet of same size and shape c0mplete all as specified as directed and shown on drawing.

Removing the existing unserviceable leg from bottom of almirah steel medium carefully by unriveting and using hand held cutting machine without damaging the other parts and supply and fixing new leg made of 1mm thick MS sheet of existing shape and size to the existing place through welding and riveting complete all as specified and as directed and as shown on drawing.

Material and labour for painting each almirah steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying two coats of hammer tone paint as per existing shade / shade as approved by Engineer-in-charge to external and internal surfaces to complete locker using spray painting machine complete all as specified and as directed.

RACK SHOE STEEL,FD/E6/MAP/02(R) Removing the existing damaged/rusted legs (U shaped) carefully without damaging the other parts by using hand held cutting machine,Supply and fixing new legs (U shaped) made out 25mm dia MS pipe 18 gauge duly welded to its position Complete all as specified and directed and as shown on drawing.

Removing the existing unserviceable wire mesh (Jali) shelves, Supply and fixing new wire mesh (Jali) shelves made out of 3mm dia MS rods duly welded to its position Complete all as specified and directed and as shown on drawing.

S & F new PVC shoe suitable to the leg complete all as specified and shown on drawing.

Material and labour for painting shoe rack steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying two coats of hammer tone paint as per existing shade / shade as approved by Engineer-in-charge to all exposed surfaces using spray painting machine complete all as specified and as directed.

TEAPOY VERANDAH,FD-35/255 Removing the existing unserviceable top from teapoy verandah carefully;supply and fixing new top of size 900mmx450mm made of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

Supply and fix new PVC shoe suitable to leg after removing the unserviceable shoe complete all as directed and as shown on drawing.

Material and labour for preparation of the old painted steel surfaces by scraping with emery paper and applying one coat of synthetic enamel paint of white colour of approved quality complete all as specified and as directed and as shown on drawing.

CHAIR COMPUTER, FD/E6/MAP/01 Removing by unscrewing the unserviceable damaged Seat & back from each chair carefully and removing the existing torn out tapsetry cloth, pressed foam cushion, elastic webbing tape from each seat and back. The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape and the seat and back shall duly covered with new tapestry cloth of approved colour and texture, with the rate of cloth shall not be less than 350 per metre and the fixing of cloth shall be done by using heavy duty gun tacker complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm rest of same shape, model and size, made of black integral skin polyurethane with 75-85 shore 'Á' hardness & reinforced with MS insert complete all as specified and directed by Engr -in -charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer complete all as specified and as directed.

Removing unserviceable adjustable pedestal assembly with hydraulic system and S&F new pedestal assembly with hydraulic system having forward tilt, self regulating tilt tension and manual over ride, 4 position tilt lock, anti shock back mechanism to prevent backrest, 360 swivel mechanism to allow with fluid lateral movement suitable for chair computer complete all as specified and directed by Engr -in -charge.

Painting to all steel portion of chair computer with one coat of synthetic enamel black paint after cleaning, dusting and scratching the entire metal surface of chair with sand paper, making surface neat and smooth complete all as specified and directed by Engr -in -charge.

CHAIR WRITING ,FD/E6/MAP/12 Removing by unscrewing the unserviceable damaged Seat & back from each chair carefully and removing the existing torn out tapsetry cloth, pressed foam cushion, elastic webbing tape from each seat and back. The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape and the seat and back shall duly covered with new tapestry cloth of approved colour and texture, with the rate of cloth shall not be less than 350 per metre and the fixing of cloth shall be done by using heavy duty gun tacker complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm rest of same shape, model and size, made of black integral skin polyurethane with 75-85 shore 'Á' hardness & reinforced with MS insert complete all as specified and directed by Engr -in -charge.

Painting to all steel portion of chair writing with one coat of synthetic enamel black paint after cleaning, dusting and scratching the entire metal surface of chair with sand paper, making surface neat and smooth complete all as specified and directed by Engr -in -charge.

CHAIR SCHOOL WITH HAND BOARD,FD/E6/MAP/05 Removing the existing unserviceable / broken hand board of Chair school with hand board and supply and fix new hand board made out of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

Material and labour for removing the existing unserviceable one piece PVC seat and back and supply and fix new one piece seat and back to Chair school with hand board complete all as directed and shown on drawing. Make of one piece seat and back : Nilkamal/Supreme/Cello/AMKO/Blow plast.

Material and labour for removing the existing unserviceable foot rest wire mesh of chair school and S & F the same with new one duly welded to match with existing complete all as specified, as directed and as shown on drawing.

Material and labour for painting each chair by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth applying two coats of hammer tone paint as per existing shade / shade as approved by Engineer-in-charge to exposed inner and outer surfaces of chair using spray painting machine complete all as specified and as directed.

COMPUTER TABLE,FD/E6/MAP/03 Removing the existing unserviceable top from table steel carefully;supply and fixing new top of size 900mmx560mm made of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

Removing the existing unservicable /damaged telescopic channel and key board of Table computer and supply and fix new telescopic channel and key board made out of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

Removing the existing unservicable mouse pad board complete from Table computer and supply and fix new mouse tray 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

Removing the existing unservicable CPU stand part complete from Table computer and supply and fix new CPU stand made of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

Removing the existing unserviceable/damaged drawer complete from Table computer and supply and fix new drawer made of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

TEAPOY VERANDAH,FD/E6/MAP/17 Removing the existing unserviceable top from teapoy carefully;supply and fixing new top of size 750mmx450mm made of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

Material and labour for painting each teapoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying two coats of hammer tone paint as per existing shade / shade as approved by Engineer-in-charge to exposed inner and outer surfaces of chair using spray painting machine complete all as specified and as directed

CHAIR REVOLVING MAKE-GODREJ,MODEL NO - PCH-5002T Removing by unscrewing the unserviceable damaged Seat & back from each chair carefully and Removing the existing torn out tapsetry cloth, pressed foam cushion,elastic webbing tape from each seat and back. The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape.The seat and back shall duly covered with new tapestry cloth of approved colour and texture ,the rate of cloth shall not be less than 350 per metre and the fixing of cloth shall be done by using heavy duty gun tacker complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair revolving godrej complete all as directed and shown on drawing.

Removing unserviceable pedestal assembly, supply and fixing new pedestal assembly having five arms with twin wheel castor wheels having wheel base not less than 70 cms complete all as directed and shown on drawing.

Painting to all steel portion of chair revolving with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth complete all as directed and shown on drawing.

CHAIR WITH DESKLET MAKE-GODREJ,MODEL NO - PCH-7004 Removing by unscrewing the unserviceable damaged Seat & back from each chair carefully and Removing the existing torn out tapsetry cloth, pressed foam cushion,elastic webbing tape from each seat and back. The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape.The seat and back shall duly covered with new tapestry cloth of approved colour and texture ,the rate of cloth shall not be less than 350 per metre and the fixing of cloth shall be done by using heavy duty gun tacker complete all as specified and as directed.

Removing the existing unserviceable / broken hand board of Chair and supply and fixing with screws new hand board made out of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other side with balancing white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails Complete all as directed and shown on drawing.

Removing the unserviceable desklet from the chairs carefully and supply and fixing new desklet made of 2mm dia wire as per existing shape and dimension. Complete all as directed and shown on drawing.

Painting to all steel portion of chair with desklet with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper, making surface neat and smooth complete all as directed and shown on drawing.

CHAIR WITH ARMS MAKE-GODREJ,MODEL NO - PCH-7003 Removing by unscrewing the unserviceable damaged Seat & back from each chair carefully and Removing the existing torn out tapsetry cloth, pressed foam cushion,elastic webbing tape from each seat and back. The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape.The seat and back shall duly covered with new tapestry cloth of approved colour and texture ,the rate of cloth shall not be less than 350 per metre and the fixing of cloth shall be done by using heavy duty gun tacker complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Painting to all steel portion of chair with arms with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth complete all as directed and shown on drawing.

CHAIR WITHOUT ARMS MAKE-GODREJ,MODEL NO - PCH-7004 Removing by unscrewing the unserviceable damaged Seat & back from each chair carefully and Removing the existing torn out tapsetry cloth, pressed foam cushion,elastic webbing tape from each seat and back. The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape.The seat and back shall duly covered with new tapestry cloth of approved colour and texture ,the rate of cloth shall not be less than 350 per metre and the fixing of cloth shall be done by using heavy duty gun tacker complete all as specified and as directed.

Painting to all steel portion of chair without arms with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.Complete all as directed and shown on drawing.