C/o Two No. Net House for Biotechnology and Agrotechnology Divisions

Amount

Earth work in excavation by mechanical means (Hydraulic exavator)/mannual means in foundation trenches or drains not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m, All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinthlevel :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level :1:2:4 (1cement:2coarse sand:4 graded stone aggregate 20 mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth inCement mortar 1:6 (1 cement:6 coarse sand)

Steel work in built up tubular round,square or recetangular hollow tubes etc.) trusses etc. , including cutting, hosting, fixing, in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete.:Hot finished welded type G.I.Pipes

12 mm cement plaster of mix : 1:6 (1 cement:6 fine sand)

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's speciafications including appropriate priming coat, preparation of surface,etc. complete.:On steel work.

Providing and fixing agroshading net (50%) over the specified area of polyhouse (finished area shall be measured for payment)

Providing and fixing G.I. chicken mesh on angle iron structure with G.I. wire.

Providing and fixing G.I. wire 2 mm thick including cutting and making holes in MS/GI structure cutting,stretching and tightening to the structure.

Providing and fixing G.I. profile of 0.8 mm thickness complete with Zig-Zag G.I.spring for tighteningof UV stabilized Rigidex film with screw etc. Complete in all respects.

Providing and fixing UV stabilized poly ethylene rigidex sheet 150 gsm on frame work in roof,sides or similar location with G.I. profile and zig-zag spring complete with required over laps for stability (Finished area shall be measured) excluding cost of frame work and G.I. profile and spring which will be paid in Basic item.

RAJDEEP AGRI PRODUCTS PVT. LTD.