Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAccepted-AOC | ₹1.3 Cr | L1 | Accepted-AOC LOWEST REASONABLE BID |
| 2 | L2₹1.3 Cr+₹5.7 L (4.42%)Rejected-Finance PLOT NO 361 FLAT NO 06 FIRST FLOOR SECTOR 11 HIRAN MAGRI UDAIPUR 313001 RAJ | UDAIPUR | UDAIPUR | RAJASTHAN | 313001 | ₹1.3 Cr+₹5.7 L (4.42%) | L2 | Rejected-Finance NOT LOWEST |
| 3 | L3₹1.4 Cr+₹12.8 L (9.95%)Rejected-Finance MARYADA 111 SHIKARGARH KANHAIYA NAGAR JODHPUR 342001 | JODHPUR | RAJASTHAN | 342001 | ₹1.4 Cr+₹12.8 L (9.95%) | L3 | Rejected-Finance NOT LOWEST |
| 4 | Rejected-Technical | - | - | Rejected-Technical Not Eligible bidder as Firm has not uploaded all the requisite documents as per NIT. Therefore not satisfies the eligibility criteria as per NIT. |
| Sl No | Description | Qty | Unit | M/s Ajay kumar Garge L2 | M/S KAUTILYA GARG L3 | Diva Infra L1 |
|---|---|---|---|---|---|---|
| 1.00 | Attending complaints of leaking / unserviceable pillar cock, Wall mixer, WHB Mixer, bib taps,two way bib taps, stop valves, 15mm - 20mm dia for making it fully functional and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass 15mm - 20mm size complete all as specified and directed by Engr-in-charges. Note: Cost of tools, plants, spare parts, thread and sealing materials shall be deemed included in quoted rates; while major parts such as Spindles / phases of CP pillar cocks, wall mixer, WHB mixer,Two way bib taps,CP bib cocks , Angle cocks replaced if any shall be measured and paid for separately under respective item. | 5,800 | Each Complaint | 100 ₹5,80,000 | 90 ₹5,22,000 | 45 ₹2,61,000 Lowest |
| 2.00 | Attending complaints of leaking / unserviceable , low level flushing cisterns, PVC or chinaware for making it fully functional and leak proof by replacing the defective parts such as rubber washers,PVC levers, PVC/ CP knobs if required complete all as specified and directed by Engr-in-charges. Note: Cost of tools, plants, spare parts, thread and sealing materials shall be deemed included in quoted rates; | 1,750 | Each Complaint | 100 ₹1,75,000 | 90 ₹1,57,500 | 45 ₹78,750 Lowest |
| 3.00 | Attending complaints of internal water supply pipes,fittings and bottle traps for removing of blockages, leakages, deteriorated condition conceled pipes, etc of any description incl removing & clearing of air locks etc., by pressure pump or any other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes and fitting with new ones complete all as specified and directed by Engr-in-charges. Note: Cost of tools, plants, spare parts, thread and sealing materials shall be deemed included in quoted rates; New GI pipes replaced if any shall be measured and paid under respective item of this schedule as S&F. This item includes for labour part only for removal of blockages of air lock, fixing of leakage complaints, etc. | 1,500 | Each Complaint | 100 ₹1,50,000 | 90 ₹1,35,000 | 45 ₹67,500 Lowest |
| 4.00 | Checking and Attending to Carpenter work in repairs to Joinery ,(wooden/ steel/aluminium)of iron alumunium mongery , pelmet box ,door spring ,rooling shutter etc requring carpenter work and carrying out minor repair such as tighting of screw nails ,wire of false celling ,easening of joinery,door spring etc including replacement of glass panes,wire cloth to joinery or any defective items /materials complete all as specified and directed by Engr-in-charges. Note: Cost of tools, plants, spare parts, nails or screws, etc.,. materials shall be deemed included in quoted rates. | 6,300 | Each Complaint | 100 ₹6,30,000 | 90 ₹5,67,000 | 45 ₹2,83,500 Lowest |
| 5.00 | Checking and Attending to welding work in repairs to steel windows, handles,door spring,iron frame of doors,rolling shutter garrages and other iron misc works, welding (run or spot welding as per site require maint) including replacement of defective items/material alongwith and including welding machine gloves ,welding glass welding rodany other tools required ,as per requirement complete all as specified and directed by Engr-in-charges. Note: Cost of tools, plants, spare parts, etc.,. materials shall be deemed included in quoted rates. | 2,000 | Each Complaint | 100 ₹2,00,000 | 90 ₹1,80,000 | 45 ₹90,000 Lowest |
| 6.00 | M&L for repairs to aluminium door, window and partition wall including fixing of hinges, aluminium beads, cleats & rubber packing etc complete all as specified and directed by Engr-in-charges. | 520 | Each | 500 ₹2,60,000 | 520 ₹2,70,400 | 350 ₹1,82,000 Lowest |
| 7.00 | Resecuring/ re-fixing of wooden / PVC shutters of any description and size not exceeding 2.00 Sqm each including taking down (if reqd), easing and adjusting and refixing where ever required and fixing new steel screws complete all as specified and directed by Engr-in-charges. | 440 | Each | 150 ₹66,000 | 170 ₹74,800 | 50 ₹22,000 Lowest |
| 8.00 | Hacking out old broken glass (any size, quality or description) from steel frames glazed with putty or beads and S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm. in each pane complete all as specified and directed by Engr-in-charges. | 400 | Sqm | 650 ₹2,60,000 | 670 ₹2,68,000 | 500 ₹2,00,000 Lowest |
| 9.00 | Hacking out old broken glass from metal frames incl punching or drilling out old glazing pins or spring clips fixed in repair and S&F sheet glass ordinary quality 3.0 mm thick and glazing with alluminium beads in square but exceeding 0.5 sqm in each pane complete all as specified and directed by Engr-in-charges. | 200 | Sqm | 650 ₹1,30,000 | 670 ₹1,34,000 | 550 ₹1,10,000 Lowest |
| 10.00 | Hacking out old broken glass from metal frames incl punching or drilling out old glazing pins or spring clips fixed in repair and S&F sheet glass 3.0 mm thick frosted glass, pin headed type, in square n exc 0.5sqm each pane glazing with oil putty complete all as specified and directed by Engr-in-charges. | 120 | Sqm | 650 ₹78,000 | 670 ₹80,400 | 550 ₹66,000 Lowest |
Tender Value
₹1.3 Cr
EMD Value
₹2.0 L
Closing Date
5 Jun 2026, 6:00 pmClosed
CWE ARMY JODHPUR
CWE ARMY MULTAN LINE ARMY AREA JODHPUR-342010
COMPREHENSIVE REPAIR INCLUDING DAY TO DAY MAINT FOR B/R AND E/M COMPLAINTS IN MD ACCN OF SHIKARGARH ENCLAVE, BAHADUR SINGH ENCLAVE AND SUGAN SINGH ENCLAVE UNDER AGE B/R-II AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 02
2026_MES_763943_1
CWE (A) JODH/GE (A) NO. 02- OF 2026-27(82526/134/E8)
Open Tender
Civil Works
Item Rate
270 days
JODHPUR
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE (ARMY) NO. 02 JODHPUR
₹2.0 L
Yes
3 Aug 2026
7 May 2026
8 Jun 2026
7 May 2026
5 Jun 2026
29 May 2026
7 May 2026 - 28 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Attending complaints of leaking / unserviceable pillar cock, Wall mixer, WHB Mixer, bib taps,two way bib taps, stop valves, 15mm - 20mm dia for making it fully functional and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass 15mm - 20mm size complete all as specified and directed by Engr-in-charges. Note: Cost of tools, plants, spare parts, thread and sealing materials shall be deemed included in quoted rates; while major parts such as Spindles / phases of CP pillar cocks, wall mixer, WHB mixer,Two way bib taps,CP bib cocks , Angle cocks replaced if any shall be measured and paid for separately under respective item. | 5,800 | Each Complaint | 31,00,000 | ₹17,98,00,00,000 |
| - | Attending complaints of leaking / unserviceable , low level flushing cisterns, PVC or chinaware for making it fully functional and leak proof by replacing the defective parts such as rubber washers,PVC levers, PVC/ CP knobs if required complete all as specified and directed by Engr-in-charges. Note: Cost of tools, plants, spare parts, thread and sealing materials shall be deemed included in quoted rates; | 1,750 | Each Complaint | 31,00,000 | ₹5,42,50,00,000 |
| - | Attending complaints of internal water supply pipes,fittings and bottle traps for removing of blockages, leakages, deteriorated condition conceled pipes, etc of any description incl removing & clearing of air locks etc., by pressure pump or any other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes and fitting with new ones complete all as specified and directed by Engr-in-charges. Note: Cost of tools, plants, spare parts, thread and sealing materials shall be deemed included in quoted rates; New GI pipes replaced if any shall be measured and paid under respective item of this schedule as S&F. This item includes for labour part only for removal of blockages of air lock, fixing of leakage complaints, etc. | 1,500 | Each Complaint | 31,00,000 | ₹4,65,00,00,000 |
| - | Checking and Attending to Carpenter work in repairs to Joinery ,(wooden/ steel/aluminium)of iron alumunium mongery , pelmet box ,door spring ,rooling shutter etc requring carpenter work and carrying out minor repair such as tighting of screw nails ,wire of false celling ,easening of joinery,door spring etc including replacement of glass panes,wire cloth to joinery or any defective items /materials complete all as specified and directed by Engr-in-charges. Note: Cost of tools, plants, spare parts, nails or screws, etc.,. materials shall be deemed included in quoted rates. | 6,300 | Each Complaint | 31,00,000 | ₹19,53,00,00,000 |
| - | Checking and Attending to welding work in repairs to steel windows, handles,door spring,iron frame of doors,rolling shutter garrages and other iron misc works, welding (run or spot welding as per site require maint) including replacement of defective items/material alongwith and including welding machine gloves ,welding glass welding rodany other tools required ,as per requirement complete all as specified and directed by Engr-in-charges. Note: Cost of tools, plants, spare parts, etc.,. materials shall be deemed included in quoted rates. | 2,000 | Each Complaint | 31,00,000 | ₹6,20,00,00,000 |
| - | M&L for repairs to aluminium door, window and partition wall including fixing of hinges, aluminium beads, cleats & rubber packing etc complete all as specified and directed by Engr-in-charges. | 520 | Each | 31,00,000 | ₹1,61,20,00,000 |
| - | Resecuring/ re-fixing of wooden / PVC shutters of any description and size not exceeding 2.00 Sqm each including taking down (if reqd), easing and adjusting and refixing where ever required and fixing new steel screws complete all as specified and directed by Engr-in-charges. | 440 | Each | 31,00,000 | ₹1,36,40,00,000 |
| - | Hacking out old broken glass (any size, quality or description) from steel frames glazed with putty or beads and S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm. in each pane complete all as specified and directed by Engr-in-charges. | 400 | Sqm | 31,00,000 | ₹1,24,00,00,000 |
| - | Hacking out old broken glass from metal frames incl punching or drilling out old glazing pins or spring clips fixed in repair and S&F sheet glass ordinary quality 3.0 mm thick and glazing with alluminium beads in square but exceeding 0.5 sqm in each pane complete all as specified and directed by Engr-in-charges. | 200 | Sqm | 31,00,000 | ₹62,00,00,000 |
| - | Hacking out old broken glass from metal frames incl punching or drilling out old glazing pins or spring clips fixed in repair and S&F sheet glass 3.0 mm thick frosted glass, pin headed type, in square n exc 0.5sqm each pane glazing with oil putty complete all as specified and directed by Engr-in-charges. | 120 | Sqm | 31,00,000 | ₹37,20,00,000 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.56 MB
BOQ_855691.xls
BOQ • 0.98 MB
TENDER134.pdf
Tender Documents • 1.30 MB
corrigendumno02-82526-134-E8.pdf
PDF • 0.15 MB
corrigendumno01-82526-134-E8.pdf
PDF • 0.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .