Tenders for ARC work of Laying of underground cable network with terminations for underground work in the area of Town S/Dn & any Other S/Dn under SI & all other scheme jurisdiction of Ankleshawar Industrial Division.

Tenders for ARC work of Laying of underground cable network with terminations for underground work in the area

of Ankleshwar town S/Dn & any Other S/Dn under SI & all other scheme jurisdiction of Ankleshawar Industrial

Item Code Item Unit FY 2024-25

HT TAPPING FROM THE EXISTING POLE INCLUDING

FIXING OF CROSS ARMS, CLAMPS ANTI-CLIMBING

DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE

1 9926000001 AND PAINTING OF FABRICATED MATERIALS AND No.

NUMBERING COMPLETE WITH COST OF PAINTS AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING

OFCROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, INSULATORS ETC. COMPLETE AND PAINTING

OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET

ERECTION OF STEEL POLES OF 9 TO 11 METERS

INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS

ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS

3 9926000003 ETC. COMPLETE AND PAINTING OF STEEL POLE, No.

FABRICATED MATERIALS USED ON THE POLEAND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY

CROSSING ON BG/MG/NG LINE FOR 0.400/11/22KV

OVERHEAD LINES I.E INCLUDING EXCAVATION OF PIT &

REFILLING OF EARTH, FIXING CROSS ARMS, TOP FITTING

CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARD,

INSULATORS ETC. COMPLETE AND PAINTING OF STEEL

POLES, FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS

200 KG PSC POLES INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTHING, FIXING OF CHANNELS,

SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING DEVICES

5 9926000005 DANGER BOARDS,INSULATORS ETC.COMPLETE AND No.

PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SETS AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO

METERS.STEEL POLE INCLUDING EXCAVATION OF PITS &

REFILLING OFEARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES, CLAMPS,ANTI-CLIMBING DEVICES

DANGER BOARDS, INSULATORS ETC.COMPLETE &

PAINTING OF POLES,FABRICATED MATERIALSUSED ON

THE POLES AND NUMBERING WITH COST OF PAINTSAS

PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.(WITHOUT AB

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH, HG FUSES OF 8 MTRS

KG PSC POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH,FIXING OF CHANNELS SUPPORTING

ANGLES, CLAMPS, ANTI-CLIMBING DEVICES, DANGER

7 9926000007 BOARDS, INSULATORS,DOFUSES ETC. COMPLETE AND No.

PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDINGOF

ERECTION OF GUY SET AND EARTHING.(WITH AB

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH,HG FUSES, 9 TO 11 METERS

STEEL POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, FIXING OFCHANNEL, SUPPORTING

ANGLES, CLAMPS, ANTI-CLIMBING DEVICES , DANGER

BOARDS, INSULATORS, ETC. COMPLETE AND PAINTING

OF POLES FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH

MOUNTING OFAB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 8 METER,200KG PSC POLE

METERS POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS,

ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR

AND CABLE WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USEDON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH,HG FUSES TRANSFORMERS,

LIGHTENING ARRESTORS, DISTRIBUTION BOX 9 TO

METERS STEEL POLES INCLUDING EXCAVATION OF PITS

& REFILLING OF EARTH CARTING OF TRANSFORMERS

FROM STORE TO SITE, FIXINGOF CHANNELS

SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS,

ANTICLIMBING DEVICES, DANGER BOARDS,CONDUCTOR

AND CABLE WIRING ETC. COMPLETE AND PAINTING OF

POLES FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTIONS OF GUY SETS AND

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS

& REFILLING OF EARTH AS PER STANDARD

SPECIFICATION WITH STAY CLAMPS, STAY WIRE,

ANCHOR ROD, TURN BUCKLE, EYEBOLT, GUY INSULATOR,

CEMENT CONCRETE BLOCK ETC. BUT EXCLUDING

CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF

CEMENT SAND METAL (1:2:4) AND WATER ETC. AS PER

STANDARD SPECIFICATION.(cement Should be 53 grade)

used for Concreting.

ERECTION OF COIL TYPE EARTHING INCLUDING COST OF

13 9926000013 COAL,SALT ETC. BUT WITHOUT COST OF GI WIRE AS PER No.

STANDARD SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE EARTHING

INCLUDINGCOST OF COAL SALT ETC. BUT WITHOUT

COST OF PIPE/GIPLATE GI WIRE AS PER STANDARD

SPECIFICATION.(20kg solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH

CLAMPS, BRASS NIPPLE, BRASS HOLDER TECK WOOD

15 9926000015 BUSH,REFLECTORS FUSE, WIRING ETC. AS PER No.

STANDARD SPECIFICATION BUT EXCLUDING COST OF

STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA

CONDUCTOR for ALL TYPE OF CONDUCTOR (EXCEPT ONE COND PER

DOG CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING KM

FIXING OF INSULATORS, BINDING JUMPERING ETC.

STRINGING OF GI WIRE 8 SWG INCLUDING BINDING

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH

PVC 2.5/4MM2 TWIN CORE CABLE FROM TERMINAL

POLE TO METERING POINT INCLUDING FIXING OF

METER WITH METER EARTHING COMPLETE WORK AS

PER STANDARD SPECIFICATION BUT EXCLUDING COST

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION

WITH PVC 4MM2/10MM2 FOUR CORE CABLE FROM

TERMINAL POLE TO METERING POINT INCLUDING

FIXING OF METER WITH METER EARTHING COMPLETE

WORK AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD

ROCK AREA FOR ERECTION OF POLE/ GUY ETC. AS PER

STANDARD SPECIFICATION OVER & ABOVE NORMAL

20 9926000020 COST COVERED AGAINST EXCAVATION OF PIT UNDER No.

NORMAL SOIL FOR ERECTION OF POLE,GUY, DOUBLE

POLE STRUCTURE EARTHING WITH THE APPROVAL OF

SUPDT.ENGINEER.

PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL

PROVIDING GUARDING OF LT LINES ON ROAD/RAIL

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD

25 9926000025 CROSSING,HT LINE CROSSING AND TELEPHONE LINE No.

CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENING ARRESTOR,

DISTRIBUTION BOX. ON 8 METERS 200 KGAND PSC POLE

INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROM STORES TO

SITE, FIXING OF CHANNELS, SUPPORTING

26 9926000026 ANGLES,BRACINGS CROSS ARMS CLAMPS, No.

ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR

AND CABLE WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS

ERECTION OF SINGLE POLE STRUCTURES WITH

MOUNTING OFAB SWITCH , HG FUSES,TRANSFORMERS,

LIGHTENINGARRESTOR, DISTRIBUTION BOX. ON 9 to

11 METERS RSJ POLE INCLUDING EXCAVATION OF PITS

AND REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROM STORES TO SITE, FIXING OF CHANNELS,

27 9926000027 SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, No.

ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR

AND CABLE WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING

OF CROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, INSULATORS ETC. COMPLETE AND PAINTING

OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS

270 KG PSC POLES INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTHING, FIXING OF CHANNELS,

SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING DEVICES

29 9926000029 DANGER BOARDS,INSULATORS ETC.COMPLETE AND No.

PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SETS AND EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2 AAAC

30 9926000030 CONDUCTOR FOR 11/22KV & LT LINES INCLUDING

FIXING OFINSULATORS, BINDING JUMPERING ETC.

STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT

31 9926000031 LINES INCLUDING FIXING OF INSULATORS, BINDING

ERECTION OF DOUBLE POLE STRUCTURES WITH

MOUNTING OF AB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 10 METERS 270 KGAND PSC

POLES INCLUDING EXCAVATION OF PITS AND REFILLING

OF EARTH, CARTING OF TRANSFORMERS FROMSTORES

TO SITE, FIXING OF CHANNELS, SUPPORTING

ANGLES,BRACINGS CROSS ARMS CLAMPS,

ANTICLIMBING DEVICES,DANGER BOARDS, CONDUCTOR

CABLE WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING

OF FABRICATION AT STORE & STACKING OF POLE SAFELY

ON ROAD SIDE OR CREDITING TO DEPARTMENTAL

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING

OF FABRICATION AT STORE & STACKING OF POLE SAFELY

ON ROAD SIDE OR CREDITING TO DEPARTMENTAL

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC

35 9926000035 POLE) (WITH TRANSFORMER) WITH CREDITING OF No.

FABRICATION & TRANSFORMER AT STORE & STACKING

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC

POLE) (WITHOUT TRANSFORMER) WITH CREDITING OF

36 9926000036 FABRICATION AT STORE & STACKING OF POLE SAFELY No.

ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING

37 9926000037 OF MESSENGER WIRE AND TO PROVIDE SERVICE KM

CONNECTION ON AERIAL BUNCH CABLE BY INSULATED

PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED

BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION

CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR

38 9926000038 ETC. FOR FIXING OF MESSENGER WIRE AND TO KM

PROVIDE SERVICE CONNECTION ON AERIAL BUNCH

CABLE BY INSULATED PIERCEING CONNECTORS

THROUGH SERVICE CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN INSULATOR,PREPARING

SHACKLE POINT,JUMPERS ETC. AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN INSULATOR,PREPARING

SHACKLE POINT,JUMPERS ETC. AS REQUIRED AND

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+

35 SQ MM INCLUDING FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING

OF CROSS ARM, LT SHACKLE INSULATOR ETC. FOR

41 9926000041 FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE KM

CONNECTION ON AERIAL BUNCH CABLE BY INSULATED

PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED

BY ENGINEER IN CHARGE.

DISMENTALING OF RSJ (9/11 METER) POLE AND

CREDITING THE OLD MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER ON

10MTR,270KG PSC POLE(WITHOUT TRANSFORMER)

43 9926000043 WITH CREDITING OF FABRICATION AT STORE AND No.

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON

10MTR,270KG PSC POLE(WITH TRANSFORMER) WITH

44 9926000044 CREDITING OF FABRICATION AT STORE AND STACKING No.

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ

45 9926000045 MM AND CREDITING FITTING OF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ

46 9926000046 MM AND CREDITING FITTING OF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ

47 9926000047 MM AND CREDITING FITTING OF ALL ACESSARIES TO KM

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ

48 9926000048 MM+1*35 SQ MM AND CREDITING FITTING OF ALL KM

ACESSARIES TO DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ

49 9926000049 MM+ 35 SQ MM AND CREDITING FITTING OF ALL KM

ACESSARIES TO DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT

50 9926000050 DOG CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING

FIXING OF INSULATORS, BINDING JUMPERING ETC.

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT ONE COND PER

LINES INCLUDING , BINDING JUMPERING ETC. KM

LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR

METER. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT OF DTR

53 9926000053 METER AND OLD METER SHOULD BE CREDITED TO SDN No.

STORE. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR

54 9926000054 METER CONNECTION. (CT COIL WILL BE PROVIDED BY PER CT

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR

DTR METER CONNECTION AND OLD CT SHOULD BE

CREDITED TO SDN STORE. (CT COIL WILL BE PROVIDED BY

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER

(MMB WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF DTR METER

BOX. (METER WILL BE PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE

58 9926000058 COPPER CABLE 3.5 METER (CABLE TO BE PROVIDED BY No.

LABOUR CHARGE FOR PROVIDING/RECONNECTION OF

59 9926000059 TERMINAL CONNECTION WITH PROPER SIZE OF LUGS.

(LUGS COST IS BORNE BY AGENCY)

LABOUR CHARGE FOR THE SPOT READING OF DTR

METER WITH DETAIL SURVEY OF DEFECT IF ANY. A DULY

SIGN COPY BY SURVEYOR PERSON OF AGENCY IN

60 9926000060 PROFORMA REPORT SHOULD BE SUBMITTED TO SDN PER DTR

OFFICE.(* ONLY IF ALL PARAMETER OF VOLTAGE,

CURRENT & LOAD AS SHOWN IN PER-FORMA IS FILLED)

AS PER THE INSTRUCTION OF ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR

METER WITH DETAIL SURVEY OF DEFECT IF ANY. A DULY

SIGN COPY BY SURVEYOR PERSON OF AGENCY IN PRO-

FORMA REPORT SHOULD BE SUBMITTED TO SDN

OFFICE. (DULY FILL PER-FORMA IN FAULT CONDITION IN

WHICH READING PARAMETER IS NOT SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING METER BOX,

PROVIDING & FIXING OF 1.5SQ MM SINGLE STRAND

62 9926000062 CORE ARMOURED COPPER CABLE (3.5METER), No.

TERMINATION IN METER & COIL ETC.(METER, METER

BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING METER BOX,

TERMINATION IN METER & COIL ETC. (WITHOUT

10CORE COPPER CABLE) (METER, METER BOX, C.T./P.T.

COIL WILL BE PROVIDED BY DGVCL)

Binding of messanger Conductorat with a distance not

more than 0.75 mtr with 6 turns minimum on XLPE Cable

with single strand binding wire (including cost of binding

Supply and Installation of 11/22 kV Distribution

Transformers HT Terminal protector (UV Resistance) with

using 95/120/150 sq.mm long barrel aluminum lug.

(1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV

Distribution Transformer with replacement of bare

conductor by HT ABC conductor (DO bottom side to

transformer) after removal of semi conductor by HT ABC

(6 inch both side). HT ABC to be supplied by DGVCL.

(1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic)

67 9926000088 Type, Earth Electrodes for HT Feeder Pole Having 2000 NO

mm Electrode Length as per the Tender Specifications

and Drawing. (All Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic)

68 9926000089 Type, Earth Electrodes for HT Feeder Pole Having 3000 NO

mm Electrode Length as per the Tender Specifications

And Drawing. (All Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having hot

dip- galvanized-zinc coating of 80-100 microns without

any joints or welding. Both the end of the GI strip should

be connected with GI nut bolts and required fabrication

work for giving separate earthing connections to

69 9926000090 (1) Neutral of the transformer Meter

(2) MS structures of the transformer center

(Approximately 25 meter GI strip per transformer centre -

as per requirement and instruction of Engineer in-

charge) (All Materials will be supplied by Agency)

Supply and Installation of uPVC standard make Pipe of

1.25" diameter for covering GI strip with UV protected

Cable Ties of 550 X 7.6 mm size to bind with pole

face(Approximately 25 meter uPVC pipe for GI strip

covering per transformer centre -as per requirement and

instruction of Engineer in-charge.

Supply & fixing of upto 33 kV Conducotr sleev for Busbar

to Drop out Fuse and Drop out fuse to Transformer H.T.

including Busbar (12 mm sleev) as per technical

specification. (All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar

to Drop out Fuse and Drop out fuse to Transformer H.T.

including Busbar(15 mm sleev) as per technical

specification. (All Materials will be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Nonflammable)

material with Weather resistant, Nonconductive bird

73 9926000095 guard OD=300 MM, ID=33 MM, Width =1.25 MM, one NO

side cut from ID to OD. (All Materials will be supplied by

Providing and fixing of LT Terminal protectors i.e.

Reuseable boot (LT Side 1.1 kV) including LT (1.1 kV)

insulating taps. All live part at LT side shall be covered

with fixing of LT insulating taps.

75 Nylon Net around Transformer Center

76 9926000097 Nylon Net (12 * 15 ft) Per Net

77 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated

78 9926000099 material for fitting nylon net shall be provided by DGVCL) Per TC

79 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree

Replacement of old jumpers & providing new double

80 9924000002 jumpers with 8" binding [D Type] & capsuling with PVC No.

81 9924000005 Support pole for Stay PSC/STP/RSJ No.

82 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator per pole in

costle area with cleaning .

84 9924000008 Pin binding of conductor LT shakel insulator No.

85 9924000009 Replacement of one/both disc.insulator at strain pole No.

86 9924000010 Replacement of LT shackle insulator at cut point No.

87 9924000011 Refixing of V cross Arm No.

Replacement of V cross Arm (With Transportation &

89 9924000013 Refixing of Top fitting in proper position No.

90 9924000014 Replacement of Top fitting No.

91 9924000015 Replacement of LT cross Arm No.

Providing DO fuse on DP with carting & jumpuring(ONE

Numburing of pole with paint by preparing back ground

93 9924000017 of one colour and have lettering(height 3" * width 0.5") No.

94 9924000018 Fixing of MMB(1PH.) at consumer end No.

95 9924000019 Fixing of MMB(3PH.) at consumer end No.

96 9924000020 Replacement of (1ph.) meter for Urban area No.

97 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with letter size

height 40mm* width 8mm)

painting consumer no. on MMB (Rural) (with letter size

height 40mm* width 8mm)

100 9924000024 Replacement of deteriorated Single phase Service line No.

Fixing of new dist. Box with complete wiring including

clamps,nut bolts etc.

Reparing of guarding involving reshaping of bearer wire

cross lacing binding etc.

Painting of steel fabricated material of RSJ DO DP

structure with paint

Painting of steel fabricated material of RSJ pole mounted

transformer double pole structure with paint

Painting of steel fabricated material of RSJ single pole

painting of steel fabricated material of PSC Single pole

(HT line) with paint

painting of steel fabricated material of PSC DO DP double

pole with paint

painting of steel fabricated material of PSC double pole

at pole mounted transformer with paint

109 9924000033 Providing line seperater single phase No.

110 9924000034 Providing line seperater three phase No.

Replacement / Providing of stay insulator along with

adjustment of tension in stay wire

Replacement of deteriorated /providing LT dist. Box with

new up to 100KVA capacity & crediting it to store.

Replacement of deteriorated /providing LT dist. Box with

new above 100KVA capacity & crediting it to store.

114 9924000038 Adjustment of tension in stay wire No.

115 9924000039 Refitting of LA No.

Converting pin point to Shackle point including

116 9924000040 location

dismentaling & restringing etc.

replacement of 11KV Pin insulator with providing new

double pin binding

replacement of 22KV Pin insulator by new 11kv pin

118 9924000042 insulator with spares & providing new double pin binding No.

Providing 11kv double disc insulators with binding &

Replacement of existing 11kv conductor (all size) with

new double pin binding

121 9924000046 Plumbing of PSC Pole with straightening at pin point No.

122 9924000047 Plumbing of PSC Pole with straightening at tension point No.

Plumbing of tilted DP structure (PSC/RSJ/STP) with

refilling of stone Murrum etc.

Providing new 11kv AB /GO switch with fabrication and

insulated colour code jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch with providing

new insulated jumper, binding, lugs etc

Providing cage type loop guard in verticle LT line with

126 9924000052 per pole

using PVC reel insulators etc

Labour charges for replacement /providing of MMB &

service with all accessories for three phase connection

Labour charges for replacement /providing of MMB &

service with all accessories for single phase connection

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE)

129 9924000055 25/63/100/200 KVA with all fabrication & creditig the old No.

material to store

130 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

132 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from pole &

crediting to S/dn (1 ph.)

Dismentaling & removing of service line from pole &

crediting to S/dn (3 ph.)

Reconnection of service line complete with PVC cable

Reconnection of service line complete with PVC cable (3

Providing spiral type earthing by G.I. NO 8(weight 2kg

5mtr in length) with salt and coal 10kg each, including pvc

138 9924000064 rigid pipe 20mm dia( 1.5mtr length) to pass exposed part No.

of G.I. wire at consumer end with all materials, earth

resistance should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm single strand

copper insulated cable with cable nail clip for spiral type

earthing at consumer end. The end of G.I. no 8 is to be

connected by connector with copper cable of which other

139 9924000070 per meter

end shall be connected to the earth terminal of meter

box. This item shall be used in location where there is

more distance between earth terminal and earthing

terminal of meter. (All materials supplied by contractor)

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM

including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of

dismantling charge of existing bare conductor and

crediting in to store & dismentaling of

service line from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as

required & directed by Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35

SQ MM including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of

dismantling charge of existing bare conductor and

crediting in to store & dismentaling of service line from LT

bare conductor and to provide service connection on

Aerial Bunch Cable by insulated pierceing connectors

through service connection box complete as required &

directed by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM

including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, binding to

142 9924000067 pin insulator,preparing shackle point,jumpers etc. and KM

inclusive of dismantling charge of existing bare

conductor and crediting in to store complete as required

& directed by Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM

including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, binding to

143 9924000068 pin insulator,preparing shackle point,jumpers etc. and KM

inclusive of dismantling charge of existing bare

conductor and crediting in to store complete as required

& directed by Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ

MM including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of

dismantling charge of existing bare conductor and

crediting in to store & dismentaling of service line from LT

bare conductor and to provide service connection on

Aerial Bunch Cable by insulated pierceing connectors

through service connection box complete as required &

directed by Engineer in Charge.

Labour charge for excavation of cable trench of 400mm

width x 1200mm depth, in any type of soil for laying of

1 9925000001 cable of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length

is to be considered)

Labour charge for excavation of cable trench of 600mm

width x 1200mm depth, in any type of soil for laying of

2 9925000002 cable of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length

is to be considered)

Labour charge for excavation of cable trench of 400mm

width x 1500mm depth, in any type of soil for laying of

3 9925000003 cable of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length

is to be considered)

Labour charge for laying of 11kV / 22 kV XLPE Cable of

size up to 240 mm2 & preparation of sand layer 100mm

thick, in the cable trench & covering the cable with

mm dia (Inner), thickness 25 mm, 1.0 meter long RCC

4 9925000004 half round muffs and providing and fixing of 4inch width Meter

yellow colour polyethylene tape with printing "CAUTION

ELECTRIC CABLE BELOW" at 0.75 m depth from ground

surface after laying cable in trench. This will provide

indication that electric cable is passing underground so

as to protect cable from mechnical injuries, refilling the

same, as per Instruction of Engineer in Charge (EIC).

Labour charge for horizontal drilling using Auger

machine without damage to surface road at max 2.0 mtrs

depth & putting of 6.11 kg/cm2 , class-4,Green color,

110mm O.D. , 8.5mm thickness H.D.P.E. pipe confirms to

IS 4984-1987(3rd revision) and BIS certification and laying

of 11KV/22KV XLPE cable of size up to 240 mm2 in HDPE

5 9925000005 pipe, as per Site Condition (excluding cost of pipe). The Meter

detail map obtained from HDD machine and excell

sheet(hard and soft copy) indicating the respective depth

and distance from adjacent landmark for each segment

for HDD is must required to be submitted. HDD to be

carried out at depth 1.5 mtrs to 2.0 mtrs as per site

conditions and as per instruction of EIC.

Labour charge for horizontal drilling manually without

damage to surface road at max 2.0 mtrs depth & putting

of 6.11 kg/cm2 , class-4,Green color, 110mm O.D.

8.5mm thickness H.D.P.E. pipe confirms to IS

49841987(3rd revision) and BIS certification and laying of

11KV/22KV XLPE cable of size up to 240 mm2 size, as per

Site Condition (excluding cost of pipe). The detail map

and excell sheet(hard and soft copy) indicating the

respective depth and distance from adjacent landmark

for each segment of cable to be submitted. Drilling to be

carried out at depth Minimum 1.2 mtrs to 2.0 mtrs as per

site conditions as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D.

, 8.5 mm thickness H.D.P.E. pipe confirms to IS 4984 and

BIS certification for laying of underground 11KV / 22KV

XLPE cable up to 240 mm2 size.

Labour work for RCC concreting on disputed location and

repairing of damage portion of road crossing for the work

carried out for roads crossing as well as concreting &

muffing of ploes including all materials (1:2:4)

Providing & fixing concrete stone route marker of

mm width x 150 mm thick x 650 mm height embedded in

earth at least 300 mm below & 350 mm above ground

level respectively at distance approx 50 meters along the

length of cable. The RCC concreting (1:2:4)(all necessary

maeterials will be in bidder's scope) of route marker is to

be carried out 300 mm width x 150 mm thick x 300 mm

9 9925000009 below ground level as per instruction of EIC. The route No.

marker should be with name of company with approved

yellow colour-DGVCL. The distance from marker to cable

and cable depth with feeder name etc., marked with

arrow sign is to be painted on it.The route marker is to be

fixed at location near to any fixed permanent location

(not necessary to fix exact on top of cable) as per

instruction of EIC.

Erection of D.P. (double pole) structure using 9 / 11 Mtr.

RSJ pole with cable connection arrangement along with

10 9925000010 fitting of necessary fabrication for 11KV cable including No.

excavation of pit & refilling of earth as per instruction of

EIC. (Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ

pole with cable connection arrangement along with

fitting ofnecessary fabrication for 11KV/22 KV cable

including excavation of pit & refilling of earth as per

instruction of EIC. (Exclusive of concreting & muffing of

Erection of D.P. (double pole) structure using 8.0 Mtr.

PSC pole with cable connection arrangement along with

12 9925000012 fitting of necessary fabrication for 11KV cable including No.

excavation of pit & refilling of earth as per instruction of

EIC. (Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC pole

with cable connection arrangement along with fitting

13 9925000013 ofnecessary fabrication for 11KV/22 KV cable including No.

excavation of pit & refilling of earth as per instruction of

EIC. (Exclusive of concreting & muffing of poles)

Labour charge for erecting of 11kV / 22 kV XLPE cable of

size up to 240 mm2 on DP Structure with fixing of 02 Nos

polymer cleats on top and middle part.Polymer cleats,

nut bolts etc. fixing material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-4,Green color,

110mm O.D. , 8.5mm thickness H.D.P.E. pipe confirms to

IS 4984 and BIS certification on the erected DP structure

for the mechanical protection of cable by inserting the

15 9925000015 cable inside HDPE pipe. The HDPE pipe shall be erected in Per Job

such a way that 300mm shall be below the ground level

and the rest 2700 mm shall be supported on the DP

Structure with 01 No Polymer cleat.All materials including

polymer cleat and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm

dia class-B GI pipe with pit to be filled with salt & coke

and construction of chamber as per DGVCL Drg. No. dg

/100 for DP and cable. The earthing pit should be joined

with cable by G.I. strip of size 1” width & 2 mm thick. All

material GI pipe, Coke, Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations

17 9925000017 (outdoor) for upto 11kV 3C x 185 mm2 size XLPE cable as No.

per DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations

18 9925000018 (outdoor) for upto 22 kV 3C x 185 mm2 size XLPE cable as No.

per DGVCL technical specification)

Supply & fixing of heat shrink type end terminations

19 9925000019 (indoor) for upto 11kV 3C x 185 mm2 size XLPE cable as No.

per DGVCL technical specification)

Supply & fixing of heat & shrinkable end terminations

20 9925000020 (indoor) for upto 22 kV 3C x 185 mm2 size XLPE cable as No.

per DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint

21 9925000021 for upto 11kV 3C x 185 mm2 size XLPE cableas per DGVCL No.

technical specification.

Supply & fixing of heat shrinkable straight through joint

22 9925000022 type for upto 22kV 3C x 185 mm2 size XLPE cable as per No.

DGVCL technical specification

Labour charge for excavation of 2100mm long x

1200mm wide x 1200 mm deep joint pits for installation of

11kV / 22kV Straight through joints as per instruction of

engineer-in-charge & covering the cable with 150 mm dia

(Outer), thickness 25 mm, 1.0 meter long RCC half round

muffs & refilling same as per instruction of EIC .

Providing and fixing of insulating bus bar, made from

11KV/22KV XLPE cable after removal of semi conducting

layer and applying of PVC heat shrinkable anti-tracking

core insulating tubing (1.1KV), on both end terminal using

Aluminium long barrel heavy duty up to 240 sq mm lugs,

24 9925000024 Aluminium bus connector. Taping with PG- clamp for bus No.

conductor as per drawing and as per instruction of EIC.

The Alluminium lugs and PG clamp shall be covered with

11KV/22KV HT insulating tapes.(11KV/22KV XLPE cable

will be in scope of DGVCL while all other materials will be

in bidder's scope)

Testing of cable at various points and commissioning the

25 9925000025 feeder as per instruction of engineer-in-charge.Test result No.

shall be submitted by contractor with bill.

Preparation and submission of 6 (six) copies, of complete

layout drawings with GIS mapping as per actual cable

routing showing road crossing, HDPE pipe sleeving,

jointing locations, markers etc.

Providing and fixing of Sign Board at junction point

Made out of 2 mm aluminium sheet size 750x300 mm

(2.5 x 1ft) rectangle, as per design, pre treated with

phosphate process and acid etching coated with one coat

of epoxy primer and two coats of best quality paints,

refloctrorised with Hi-Intensity retro – reflective sheeting

as per the latest and frame fabricated from suitable size

iron angle. The Sign Board is to be fixed on the base

prepared from channel and bracing angles which is

grouted by means of cement concreting of 1:2:4 for size

of 300 mm dia x 800 mm height (500 mm to be grouted in

ground). The details to be displayed on sign board will be

given by In-charge Engineer. (a) Hi intensity Micro

prismatic Grade

Providing and fixing of Sign Board (Danger Board) on

Distribution Transformer Centers

Made out of 2mm aluminium sheet size 300x300mm

(1x1ft) as per design, pre treated with phosphate process

and acid etching coated with one coat of epoxy primer

28 9925000028 and two coats of best quality paints, refloctrorised with No.

Hi-Intensity retro-reflective sheeting as per the latest and

frame fabricated from suitable size iron angle. The Sign

Board (Danger Board is to be fixed at the location as per

instruction of In-charge Engineer. (a) Hi intensity Micro

prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x

75 mm (W) from 3 mm aluminium sheet along with

mm dia aluminium binding wire for fixing of aluminium

tag near end termination joint at DP structure for

identifyng the cable. The details of feeder i.e. 11 / 22 KV

with feeder name shound be punched on the tag by letter

punch of size 16 mm as per instruction of Incharge

Supply & fixing of heat shrink type end terminations

30 9925000030 (outdoor) for 11kV 3C x 240 mm2 size XLPE cable as per No.

DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations

31 9925000031 (outdoor) for 22 kV 3C x 240 mm2 size XLPE cable as per No.

DGVCL technical specification)

Supply & fixing of heat shrink type end terminations

32 9925000032 (indoor) for 11kV 3C x 240 mm2 size XLPE cable as per No.

DGVCL technical specification)

Supply & fixing of heat & shrinkable end terminations

33 9925000033 (indoor) for 22 kV 3C x 240 mm2 size XLPE cable as per No.

DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint

34 9925000034 for 11kV 3C x 240 mm2 size XLPE cableas per DGVCL No.

technical specification.

Supply & fixing of heat shrinkable straight through joint

35 9925000035 type for 22kV 3C x 240 mm2 size XLPE cable as per DGVCL No.

technical specification

Installation, Testing and commissioning of 11 KV,630 A

SCADA Compatible, RRL type- 3 Way RMU including Two

36 9925000038 numbers of earthings as per Drawing (material is in No.

bidder's scope) and as per DGVCL Technical specification.

Installation, Testing and commissioning of 11 KV,630 A

SCADA Compatible, RRLL type- 4 Way RMU including

37 9925000039 Two numbers of earthings as per Drawing (material is in No.

bidder's scope) and as per DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A

SCADA Compatible, RRL type-3 Way, RMU including Two

38 9925000040 numbers of earthings as per Drawing (material is in No.

bidder's scope) and as per DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A

SCADA Compatible, RRLL type-4 Way, RMU including Two

39 9925000041 numbers of earthings as per Drawing (material is in No.

bidder's scope) and as per DGVCL Technical specification.

Construction of plinth for 11KV, RRL type- 3 Way (i.e

Two numbers of Isolator & One number of Breaker) Ring

40 9925000042 Main Unit as per DGVCL's technical specification No.

mentioned in drawing no: Drg. 11kv-01. All required

material will be supplied by contractor.

Construction of plinth for 11KV, RRLL type- 4 Way (i.e

Two numbers of Isolator & Two number of Breaker)Ring

41 9925000043 Main Unit as per DGVCL's technical specification No.

mentioned in drawing no:Drg. 11kv-02.All required

material will be supplied by contractor.

Construction of plinth for 22KV, RRL type- 3 Way (i.e

Two numbers of Isolator & One number of Breaker) Ring

42 9925000044 Main Unit as per DGVCL's technical specification No.

mentioned in drawing no: Drg. 22kv-01. All required

material will be supplied by contractor.

Construction of plinth for 22KV, RRLL type- 4 Way (i.e

Two numbers of Isolator & Two number of Breaker)Ring

43 9925000045 Main Unit as per DGVCL's technical specification No.

mentioned in drawing no:Drg. 22kv-02.All required

material will be supplied by contractor.

Modifications e.g.Providing and fixing of Terminal

protectors i.e. Re-use able boot (HT Side 11/22KV, LT Side

1.1KV) including 11/22 KV insulating taps and L.T.(1.1 KV)

insulating taps ,Busbar, Tapping from Bus Bar (11/22 KV

XLPE cable) through P.G. Clamp for H.T. Jumper to D.O.

Fuse to bushings of Transformer Center, providing &

Fixing of jumper and providing & fixing of Heat

Shrinkable Anti Tracking Core Insulating Tubing

(Insulation Level 11/22 KV) in H.T. jumper , Clamping

arrangement of cable support frame on both side of

existing Over Head type Distribution Transformer to

utilize in Under Ground cable network as per drawing &

as per instruction of Engineer incharge. All live parts i.e.

PG-Clamp, connections of D.O.fuses, HT bushings etc .

shall be covered with fixinng of 11/22 KV HT insulating

tapes. ( 11/22 KV XLPE cable will be in scope of DGVCL

while all other materials will be in bidder's scope ) .

Laying of any size of 11/ 22 KV XLPE /PILC Cable in Per Cable Per

redaymade trench or in open space Mtr

46 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

Supply of 150 mm dia (Inner), thickness 25 mm,

meter long RCC half round pipe

1.DGVCL will provide key material like M.S.

materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc. to the

contractor.2.All fabricated items shall be fabricated as per

DGVCL approved drawing and by welding rods confirming

to the relevent ISI specification and as directed by

Engineer in charge.3.Necessary electricity connection for

fabrication items shall be provided by DGVCL on payment

of required charge for connection & electricity bill of the

same shall be paid by the agency.4.All the rates are

Note: inclusive of PF & Exclusive of GST applicable time to

time.5.All steel material are to be painted as below:(a)

Scrubbing of rusted surface properly before applying the

paints on to the RSJ poles & steel fabricated materials of

RSJ/PSC poles is must required.(b) Two coats of approved

ISI mark red oxide (primer) is to be properly painted for

the RSJ poles & steel fabricated materials of RSJ/PSC

poles. (c) Two coats of approved ISI mark silver paint (i.e.

triple mangoes or equivalent quality silver paint) is to be

properly painted on to the RSJ poles & steel fabricated

materials of RSJ/PSC poles.

EXECUTIVE ENGINEERING

ANKLESHWAR IND DIVISION