ADDN/ ALTN/ RENOVATION TO CERTAIN BUILDINGS IN HQ SWAC AT VSN UNDER GE (AF) CHILODA

Amount

S&F 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws complete all as specified and as directed.

M&L for marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white complete all as specified and as directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M&L for 25mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/ frame to match and fixed to chowkhats complete all as specified and as directed.

M&L for taking down chowkhats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

M&L for taking down chowkhats or frames exc. 1.5 Sqm and n. exc. 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

M&L for brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F for 200mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 300mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F 100mm long butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed complete all as specified and as directed.

S&F extruded brass handles, cast type, fabricated type polished bright 75mm in length complete all as specified and as directed.

S&F 4 lever, 100mm long, brass mortice lock complete all as specified and as directed.

S&F aluminium (extruded body section) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S&F 18 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed with screws complete all as specified and as directed.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

M&L for treating the surface of black jet granite stone with beeswax polish complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for two coats of plastic emulsion paint over a coat of primer including preparation of surfaces on walls or ceiling complete all as specified and as directed.

M&L for 15mm GI pipe medium grade fixed to wall, ceiling or laying in floors complete all as specified and as directed.

S&F for PVC (SWR) 75mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in walls and floors complete all as specified and as directed.

S&F in repairs cast iron floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

Demolition of stone slabs & tiles of any thickness & in any position laid, bedded and pointed in any mortar otherwise specified complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L dismantling for wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L non-skid joint free coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not.exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 20mm thick in CM (1:6) all as specified and directed.

All as per Item No. 27 above but on vertical surfaces/ skirting and including backing coat of 10mm thick in CM (1:4) complete all as specified and as directed.

M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 20mm thick in CM (1:6) complete all as specified and as directed.

M&L for two coats of oil based distemper over 3mm white putty including complete removal of existing treatment & preperation of surfaces complete all as specified and as directed.

M&L for 40mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/ frame to match with vision panels or peepholes, square or rectangular including lipping (supplying and fixing of glass measured separately) and fixed to chowkhats complete all as specified and as directed.

S&F magnetic catches (Size = 25 mm x 12mm) complete all as specified and as directed.

M&L for polishing SS Hand rail including cleaning existing surface and making surface good to appear n. exc. 20 cm in grith complete all as specified and as directed by Engr-in-Charge.

M&L for cutting extended portion of prelimnated particle board upto 25cm thick in decorative work work and making surafce smooth and even and fixing PVC bedding over cut portion of matching shade complete all as specified and as directed.

M&L for removing and refixing of ACP sheet/ prelaminated particle board at a distance n. exc. 50m using necessary fixing arrangement such as nails, screws and drilling complete all as specified and as directed.

S&F stainless steel butt hinges medium weight SS of size 100mm complete all as specified and as directed.

M&L for removing 12mm thick Glass Partion upto 3m in vertical height and refixing the same at the distance not exc. 100m and securing with necessary jambs, cleats and fixed to floors complete all as specified and as directed.

S&F 6 mm thick corner glass self with aluminum/ SS railing incl brackets for fixing (size 300 mm x 100 mm) etc complete all as specified and as directed.

S&F in repairs 15mm size angular stop cock with wall flange complete all as specified and as directed.

M&L for preparation of existing wall/ ceiling surfaces and applying two coats of texture finish paint of approved pattern over a coat of primer complete all as specified and as directed by Engineer-in-Charge.

S&F health faucets, hand shower stand/ hook only brass cromium plated including screws for fixing on wall etc. complete all as specified and as directed.

S&F decorative type wall paper self adhesive, fixed over wall, ceiling, wooden or particle or plywood with necessary cleaning of surface complete all as specified and as directed. Note:- Decoration of wall paper as directed by GE.

S&F toilet paper holder complete all as specified and as directed.

S&F wall mounted soap dispenser fixed to walls complete all as specified and as directed.

S&F aluminium powder coated, (minimum thickness of powder coating 50 micron of approved colour) ventilator, partially glazed and partially louvers, outer frame and mullion fafricated with aluminium section of size 82.50mm x 38mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) half portion glazed with 4mm thick froasted glass including rubber bedding and glazing clip half portion louveres of 80mm wide and 4mm thick frosted glass including aluminium louver patti including SS wire gaze for fixing of 0.36mm dia and 1.40 width aperturer with 25x3 mm thick aluminium strip with screw to upper half portion of ventilitor all fitting & fixture and fixed in position including taking down of old ventilator complete all as specified and as directed.

S&F for decorated PVC Jafri board 12mm thick fixed over wall, ceiling, wooden or particle or plywood with necessary cleaning of surface complete all as specified and as directed. Note:- Jafri pattern as directed by GE.

S&F wall mounted towel rack of aluminium of length 450mm complete all as specified and as directed.

S&F toughened frosted glass 12mm thick fixed to walls including diamond polishing and all hardware fitting complete all as specified and as directed by Eng-in-Charge.

S&F table top wash hand basin with necessary jointing arrangement complete all as specified and as directed.

S&F pillar taps with Aquisense Sensor, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.

S&F urinal with sensor chromium plated screwed down highpressure, with or without lettered screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.

S&F single piece wall hung EWC with cistern size 370x690x795mm including custum made seat cover and flush fitting complete all as specified and as directed by Engr-in-Charge.

M&L for brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified.

Demolition of brickwork built in cement morter including work all quoins, aches, pillars, etc, complete all as specified and as directed by Engr-in-Charge.

Shree Builders