Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.2 LAccepted-AOC BANPURA BATWARA SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹37.8 L+₹1.6 L (4.38%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest | |
| 3 | Rejected-Technical | - | Rejected-Technical NO IN WLR QTR SEP 23 |
Tender Value
₹33.7 L
EMD Value
₹67,400
Closing Date
11 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
PROVN OF WASHROOM AND TOILET WITH ALLIED INFRA FOR JCOs/OR AT HAWS AND PROVN OF BIO-TOILETS AT SSTC GULMARG UNDER GE 969 EWS
2023_MES_627453_1
CA NO 969 WS - /2023-24
Open Tender
Civil Works
Item Rate
180 days
GULMARG
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 969 EWS
₹67,400
Yes
23 Jan 2024
8 Nov 2023
13 Dec 2023
8 Nov 2023
11 Dec 2023
23 Nov 2023
Amount
Surface dressing n. exc 15 cm deep in soft/loose soil, complete all as specified and as directed.
Excavation in trenches n exc 1.5 m wide & n exc 1.5 m depth for foundation, etc, and get out in soft soil/loose soil, complete all as specified and as directed.
Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm in any type of soil complete all as specified and as directed.
Removing excavated soil exc 250 m but not exc 500m and depositing where directed.
M&L for Hard core of gauge exc 63mm but not exc 100mm, deposited, spared and levelled in layers n exc. 15 cm thick, watered and rolled/ramed, complete all as specified and as directed.
M&L Plain Cement Concrete Type D2 (1:4:8), (using 40 mm graded stone aggregate) as in foundation, filling, and mass concrete, complete all as specified and as directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.
M&L for damp proof course to horizontal or vertical surface including neccessary form work 40 mm thick in cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate, complete all as specified and as directed.
M&L Precast cement concrete hollow block masonary Type 1:2:4 using 16mm graded aggregate exc. 10cm in width and setting in cement mortar 1:4, complete all as specified as directed.
M&L Precast cement concrete hollow block masonary Type 1:2:4 using 20 mm graded aggregate exc. 10cm in width and setting in cement mortar 1:4, complete all as specified as directed.
M&L Brick work with subclass 'B' bricks, straight, or curved on plan exc 6m mean radius, built in CM (1:4), complete all as specified and as directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar (1:4) and finished even and smooth without using extra cement, complete all as specified and as directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar (1:4) with WPC, complete all as specified and as directed. Note : Wpc shall be measured and paid separately.
M&L for rendering 15 mm thick on stone/Brick masonary surface or other than fair faces of brick work in cement mortar (1:6) with WPC, complete all as specified and as directed. Note : Wpc shall be measured and paid separately.
M&L for rendering 15 mm thick on stone/Brick masonary surface or other than fair faces of brick work in cement mortar (1:6) without using extra cement, complete all as specified and as directed.
Supply only Liquid water proofing compound
M&L for preparing newly plastered surfaces of walls , applying two coats of distemper oil emultion, white oil tinted, complete all as specified and as directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed.
S&F second class soft wood plain, solid, straight chowkats and frames,wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and as directed.
S&F FI 25x3mm for hold fasts Bands, straps, supports or stays for Including bolts, rainwater, ventilating pipes, including bolts if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made sliding bolts; clamps: hold fasts; wall ties; hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers & similar small articles conforming to Fe 290 GDE E-165, complete all as specified and as directed.
S&F 35mm thick second class soft wood plain, framed, panelled shutters (any number of panels), with panels of veneered particle board or plywood or bison board.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification all as directed. Note: The quote rate shall be inclusive of following: (i) Existing/new wall edges shall be finished properly in cement plaster in CM 1:4 including supply and fixing of 6 Nos wooden plugs for catch door frame size not exc 17 sqcm average sectional area and 100mm long. (ii) Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS Screw,3 each on either side
S&F Powder coated Anodised aluminums frame for sliding windows, ventilators and with one or more rebates including joining cleat and handles and other neccessary fittings for fixing etc. complete all as specified and as directed.
S&F Powder coated Anodized Aluminium window and ventilators shutters, without sash bar, aluminum section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing anodized aluminum snap beading, screws, locking arrangement etc complete all as specified and as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of GE 410 (Gde-E-250 quality-A) complete all as specified and as directed.
M&L Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.
M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,complete all as specified and as directed.
Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and as directed.
M&L for mild steel TMT Bars 10mm dia and over, quality, cut to length, bent to shape required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed.
All as per item No.28 above in here but 5mm dia and over upto to 10mm dia in stirr ups, spacers and binders.
Use & waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and as directed.
M&L Reinforcement cement concrete Type M-30 (20mm graded crushed aggregate) as in footing, plinth band complete all as specified and as directed.
Use & waste Formwork to sides of columns, complete all as specified and as directed.
M&L Reinforcement cement concrete Type M-30 (20mm graded crushed aggregate) as in columns complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, griders, bresummers, lintels, cantilevers,shelves including supports, overhangs etc also splays between floors
M&L Reinforcement cement concrete Type M-30 (20mm graded crushed aggregate) as in beams and lintels, complete all as specified and as directed.
M&L for providing, cement concrete 1:2:4 type B-O, using (12.5 mm graded aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
S&F 150mm long MS barrel tower bolts stove enameled black with bright bold, complete all as specified and as directed.
S&F 250mm long MS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts of stove enameled black including necessary nut and bolts, complete all as specified and as directed.
S&F 100 mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and as directed.
S&F 125 mm long MS pressed handle ovel type, stove enamelled, complete all as specified and as directed.
S&F 150 mm long MS pressed handle ovel type, stove enamelled, complete all as specified and as directed.
S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in Square n exc 0.5 sqm in each pane, complete all as specified and as directed.
S&F mild steel plates wind ties for roof including securing bolts and work confirming to Fe-290 Gde E-165, complete all as specified and as directed.
M&L 100mm thick cement concrete type D-2, (1:4:8) using (40mm graded stone aggregate ) in sub bases of flooring /hard standing, complete all as specified and as directed.
M&L 75 mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base of flooring
M&L joint free Non-skid ceramic coloured tiles 7 to 8mm thick area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick cement plaster using CM (1:4) complete all as specified and as directed.
M&L for glazed ceramic tiles in vertical surface 350X250X7, 450x350x7 to 8mm thick colour and design (as approved) in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 15mm thick cement plaster using CM (1:4), complete all as specified and as directed.
S&F Health faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, seat cover etc, complete all as specified and as directed.
S&F PVC valveless, 10 liters syphonic action cistern, low level, white, with inlet, ball valve, float and including brakets and connection to pipes, complete all as specified and as directed.
S&F vitreous China Wash Basin white, flat back size 550x400 mm including bracket, waste coupling, waste pipe complete all as specified and as directed.
S&F Vitreous china urinal, Full Stall with aspirator type flat back white (minimum), with coupling and grating and union for discharge pipe, complete all as specified and as directed.
S&F towel rail 450mm long of PTMT fixed with and including choromium plated brass screw and wooden/ plastic cleats (minimum weight 170 gms), complete all as specified and as directed.
S&F 15 mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.
S&F 15 mm dia Basin Míxer fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot' or'Cold' with long screw shank fly nuts screwed shanks and fly nuts screwed for iron pipe and fixed.
S&F toilet paper holder premium quality, stainless steel or brass chromium plated, complete all as specified and as directed.
S&F Corner glass Shelves (with brackets) for bathroom, complete all as specified and as directed.
S&F PVC floor trap, 100 mm outlet plain with grating including jointing to wast pipe and fixed with solvent cement, cement concrete (1:2:4) B1, complete all as specified and as directed.
S&F in repairs PVC gully trap with cover of size 125mm including PCC bed complete all as directed.
M&L for 75 mm dia PVC (SWR) Pipe single socketed in any length with rubber joints fixed in walls.
S&F PVC (SWR) bends 75mm bore, complete all as specified and as directed.
S&F PVC (SWR) bends with access door 75mm bore, complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.
S&F PVC (SWR) bends 110mm bore, complete all as specified and as directed.
S&F PVC (SWR) bends with access door 110mm bore, complete all as specified and as directed.
S&F PVC (SWR) 75 mm dia vent cowl
S&F PVC (SWR) 110/75mm 'S' trap.
Preparation of new or previously untreated steel surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 Itrs capacity all as specified in SSR Part-I, incl 2 no's 20mm Nipple suitable foor HDPE water tank.(minimum weight 20mm-45gms), complete all as specified and as directed.
S&F 3- layer PP-R Polypropylene random copolymer) 20mm dia concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
S&F 20mm bore Gl tubing medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor.
S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore dia of pipe.
S&F 15mm bore Bib taps, chromium plated with crutch or butterfly handle fancy type screwed down, screwed for iron or brass ferrule and fixed but fency type, complete all as specified and as directed.
S&F PVC connection 15 mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.
S&F 15mm dia angle stop valve of PTMT any colour high pressure screwed for for iron pipe and fixed, complete all as specified and as directed.
M&L 18 to 20mm thick Granite (jet black colour) tiles 16 to18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over, complete all as specified and as directed.
Rounding to edges of Granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed.
M&L cement concrete 1:3:6 type C2 bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm pipe, complete all as specified and as directed.
M&L for Reinforced concrete pipes 150 mm bore , class NP2, laid and jointed complete with collars, laid in trenches and jointed in CM 1:1, complete all as specified and as directed.
M&L 2nd class soft wood Plain fillets exc 13 Sq.cm, n exc 25 Sq.cm rectangular in section, clean sawn screwed with nails or brads complete all as specified and as directed.
S&F 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on Ceiling, complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in Hard/dense soil.
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick built in CM (1:4) complete all as specified and as directed.
M&L for preparing newly plastered surfaces on walls and applying two coats of white wash, complete all as specified and as directed.
S&F in the frame at site, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part-II, complete all as specified and as directed.
S&F 30mm thick 2nd class Soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etcsize of members of shutters all as specified in SSR Part-1 section 8 clause 8.24(b) all as specified.
S&F 4mm thick figured, pinhead type, in squares not exceeding 0.5 Sq.m in each pane
M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment, complete all as specified and as directed.
M&L 50 mm thick Cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) in plinth protection.
S&F PVC SWR Floor trap of 75mm outlet plain with grating including jointing to waste pipe and fixed with solvent cement, cement concrete 1:2:4 B1, complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) pipes single socked, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.
S&F Aluminum, anodized barrel tower bolts of extruded section and fixed of length 150mm.
S&F Aluminum anodized sliding door bolt with hasp and staples (bolt type) and fixing clips alloy and fixed of length 200mm.
S&F Aluminum anodized handles cast type of 100mm, complete all as specified and as directed.
S&F stop valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes but fancy type C.P. with long shank.
S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 15mm bore dia of pipe.
S&F 1000 Itrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and as directed.
S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight 20mm-210gms)
S&F Gl Tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor.
S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with CI 'P' or 'S' trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, complete all as specified and as directed.
S&F vitreous China wash hand basin with pedestal, white of size 550x400mm incl CP waste coupling and PVC waste pipe and MS steel brackets all as specified as in repairs.
S&F 15mm bore pillar tap fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked, complete all as specified and as directed.
S&F in repair Vitreous China Urinal, Full stall type coloured/white complete fixing with suitable fixing arrangements to wall with and including CP urinal spreader, CP domed waste coupling and waste pipe complete all as specified and as directed.
Cutting into existing manholes for internal dia of 150mm dia pipe in connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required.
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls, complete all as specified and as directed.
M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm graded stone agg) as in floor, finishing the surface fair and even without using extra cement.
Machine pressed precast concrete interlocking paver block PC Coated any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade, complete all as specified and as directed.
M&L for 25mm sand cushion under paving block including watering and consolidation.
M&L for Bio digester Septic tank of capacity 3500 Ltr (MK-2 DRDO technology) and with 100 mm Thick PUF insulated panes along with heater and DRDO bacteria as applicable complete all as specified by manufacturer including exavation in hard and dense soil, PCC (1:4:8), returning, filling, spreading levelling. Note:- (a) Contractor shall submit ink signed LAToT document for the MK-II Biodigested by DRDO. (b) Rates are included transportation/GST and installation charges. (c) Bio digester septic tank shall be installed as per manufacturer specification.
M&L for Soakage wells excavation, in any type of soil, foundation in PCC (1:3:6), walls of honey combed masonary with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC Cover, interconnecting pipes RCC/DWC Complete filled with brick bats of size 2.4 M dia X 3.0 M effective depth complete all as specified and as directed shown on drg CESZ/TD-1080/2011
M&L On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc,complete all specified for 20 users complete all as specified and and as per manufacturer instructions and as directed. Note: 1) Excavate the pit as per the size of Septic tank leaving side gap of "9" on all sides. 2) Level the bed and foundation in PCC. 3)Place the septic tank into the pit. 4)Fill sides with dry sand & bajiri and water it fully for effective compaction. 5) Do inlet & outlet pipe connection to the septic tank.
Soakage wells excavation, in any type of soil, foundation in PCC (1:3:6), walls of honey combed masonary with top ring of M30 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M30/ SFRC Cover, interconnecting pipes RCC/DWC Complete filled with brick bats of size 1.8 M dia X 3.0 M effective depth complete all as specified and as directed shown on drg CESZ/TD-01/2015 Sht 1/3 to 3/3.
M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS Copper conductor cable 1.5 Sgm including clamps, screws guttier/plug etc PVC unsheathed cable into and including PVC board with bakelite sheet and PVC insulated FRLS Cable of size 1.5 Sqmm as earth continuity conductor.
(a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way
(b) One 3 pin 5 Amp switch socket outlet on independent board
S&F Socket outlet 2 in 1, 3 pin, 5A, Complete all as specified and as directed.
S&F switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as secified and as directed
M&L for point wiring in PVC casing caping with 2.5 Samm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.
S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.
S&F in repair Ceiling rose surface bakelite surface 65x50 mm 3 terminals fixed on wall/ceiling and including PVC block.
S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, Complete all as specified and as directed
Supply & Fixing in repair LED bulb thread/pin type of capacity 10 Watt
S&F LED Lamp 7W. Make Havells cat No. LHLDEREEMK8X015/ Philips/ Bajaj/ Crompton.
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose. complete all as specified and as specified and as directed.
S&F in repair Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.
S&F exhaust fan, steel body AC single Phase, 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and as directed.
S&F in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m. Complete all as specified and as directed.
S&F in repair MCB DB 4 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP 42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and as directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN current carrying capacity 32 AMP in the MCB DB , complete with connection testing and commissioning.
S&F in repair amp rating 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp in the MCB DB complete with connection testing and commissioning, all as specified and as directed.
S&F LED light fitting 1x9W/1X10Wbukhead luminaires including LED light driver holder |connecting up with three core flexible copper conductor cable of suitable size.
M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia Gl pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc
S&F electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.
Supplying. laying, jointing and testing XLPE insulated,armoured under ground heavy duty electric cable with stranded aluminium conductor, 1100 volts, grade nominal cross sectional area 10 sqmm 2 core laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed
M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified and as directed.
Sub class 'B' common kiln burnt clay building bricks, old size 230mmx115mmx75mmn, laid at right angle along the cable over sand cushioning, as cable protection, complete all as specified and as directed.
Supply and laying Tubes 'Medium grad' galvanised, 20MM with all fittings such as elbow,socket, nipple, Tee etc laid in trenches.Complete all as specified and as directed.
M&L Cutting GI 25MM pipe and inserting Tee 20mm Gl with suitable arrangement, complete all as specified and as directed.
Supply and Fixing Gate Valve 20MM Gun-metal, globe or gate valves,with iron wheel head. screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F 3 Layer PPR (Plypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches of 25MM.
S&F PPR Gate Valves (Brass insert) of 25mm bore. Complete all as specified and as directed.
Cutting existing Gl water main 40 mm dia in position for inserting tee/specials for branch connection of 25mm size including Gl tee 40x40x25mm, complete all as specified and as directed.
Lagging to pipes used in internal water supply of plumbing all round with, 25 mm thick bonded mineral wool performed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS 9842 of 25 mm dia provided with chicken mesh wire netting 25 gauge, 20mm mesh and with 0.01mm aluminium foil, Complete all as specified and as directed.
MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .