S.R. to Court Building at Jetpur-Pavi Ta. Jetpur Pavi Dist. Chhotaudepur (Repairing of Compound Wall, Toilet block, Doors-Windows & Electrification)

Name of Work :- S.R. to Court Building at Jetpur-Pavi Ta. Jetpur Pavi Dist.

Chhotaudepur (Repairing of Compound Wall, Toilet block, Doors-Windows &

Electrification)

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Amount

1 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 63.00 Each 196.66

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M

2 Dismantling santtary fittings like wash basin . W.C. pan Indian and European 8.00 Each 424.10

type, flushing tank etc. including stacking the materials with all lead and lift.

3 Dismentaling tiled of stone floors laid in mortar including stacking of 567.00 Sqm 50.28

serviceable materilas and disposal of unserviceable materials with all lead

4 Providing and fixing Door of factory made & stamped I.S 12823 grade one, 69.00 Sqm 3975.36

type one 35 mm thick solid core , melamine faced , three layered resin,

flushed door, having decorative lamination on both side including 30 cm long

Stainless Steel pipe handle on both side SS ASIS 304 Grade, SS Stopper

20 CM,SS Aldrop 30CM both side, SS Hinges 3No`s in each shutter &

fixtures & fastenings as directed by Engineer in Charge, etc. complete.

5 Providing and fixing window having extruded aluminum Colour anodized 66.00 Sqm 1583.95

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt

horizontal Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member size 40 mmx18mm

x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x

1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

6 Providing and fixing standared extruded of alluminium section of size 63mm 9.00 Sqm 1175.56

x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for

7 Removing dry or oil bound distemper by a washing and scraping and sand 665.00 Sqm 11.82

papering the wall surface smooth including necessary repairs to scratches

8 Painting two coats (excluding priming coat) on new steel and other metal 300.00 Sqm 94.39

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

dust and other foreign matter.

9 Finishing wall with weather proof exterior emulsion paint or Equivalent as 665.00 Sqm 122.14

approved brand & manufacture of required shade on exterior wall surface to

give an even shade over and including a primery coat with alkaly resistance

primer of approved brand after throughly brushing surface to remove all dirt

and remains of loose powdered materials etc comp. for all height.

10 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring 45.00 Sqm 1120.36

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1cement : 3-coarse sand ) finishing with flush pointing in white cement. .

It. Item of Work Qty. Unit Rate in Amount

11 Providing and laying broken chine mosaic flooring for terrace using 549.00 Sqm 779.70

12 mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing with water and oxalic

acid etc. as directed.

12 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- 25.00 Cum 4026.02

crushed stone aggregates 20 mm nominal size) and curing complete

including cost of formwork

13 Supplying and erecting approved make of tube fitting with One no T-5 tube 8.00 Each 480.76

24/ 28 W with Electronic ballast with each tube separately THD less than

& built in adaptors, GI / PVC housing & mirror optic reflector, suitable to work

on 120V - 300V, A.C. supply with connector and adapter if required. [Make

of fitting & tube may be differ& fitting shall be providing with tube]

14 Providing and erecting, heavy duty flood light integral luminaire comprises 8.00 Each 2311.89

die cast aluminium body with heat resistant toughened front glass, silicon

rubber gasket,anodised reflector hot deep powder coated cradle clamp with

suitable size of necessary built in control gear complete with lamp.

15 Providing & erecting Approved make Ceiling Fan with double ball bearing ISI 3.00 Each 2311.89

mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having

3 blades aluminium body and blade sets having ornamental design shanks

canopy erected with earthing. [ Make shall be approved by Engineer in

16 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 4.00 No. 859.41

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

17 Providing and fixing Table top wash basin with Pillar cock, chromium plated, 2.00 No. 4584.39

bottle trap and Waste Pipe necessary couplings of approved quality for wash

18 Providing and fixing Urinal of approved quality including connection with trap 2.00 No. 1674.15

and with integral longitudinal flush pipe.(A) Squating plate pattern white

earthenware 550mm x 300mm.

19 Providing and fixing wash down Wall Hung water closet including jointing the 4.00 No. 10132.32

trap with S.W.R. pipe including Cistern ( Code no 2115) , soft close seat

cover (Code no-2325-B), Internal fitting Twin flush (Code No. 2235), outlet

Gasket for clair W/H w.c. (2433), inlet gasket ( 2535) & Cantilever C.I. Chair

Bracket (2434) & necessary fittings & G.I.inlet connection for flush etc

complete as directed by Engineee-in charge.

20 Providing & Fixing Chromium plated 25 mm diameter half turn flush cock. 10.00 No. 225.97

21 Providing & Fixing Brass screw down stop cock 25 mm dia 8.00 No. 189.16

22 Providing and fixing screw down bib taps of following size.(B) Brass 20.00 No. 214.81

chromium plated screws down Bib Tap. (ii) 20mm dia.

23 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( 20.00 Rmt 148.12

SCH- 40) for cold water including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials. 40mm dia

It. Item of Work Qty. Unit Rate in Amount

24 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( 30.00 Rmt 195.67

SCH- 40) for cold water including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

25 Providing, laying and jointing in true line and level 110 diameter U.P.V.C 45.00 Rmt 897.79

SWR (Type B) Pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diameter x 149 mm length x 145 mm height at

every 2000 mm centre to centre or shall be concealed in walls as directed

including necessary fittings such as bends, "Y" "T" shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

i.e. Rupees Twelve lakh Seventy Three thousand Two hundred Ninety Five and paise Seventy Three only.

I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

5. All item rates considered in the tender are inclusive of execution at all floor levels, including all leads and lifts

6. The Contractor will have to submit the all required mix design at his own cost before execution as

directed and to be approved from the Engineer in charge.

7. Credit for dismantalled materials of amount of Rs. 15,500.00 must be recovered from 1st R.A. bill of

All the above items of the BoQ, including item description, unit, rate, and amount, have been verified

by me and found to be in order.

Deputy Executive Engineer Divisional Account Officer Executive Engineer

Bodeli (R&B) Sub Division, Chhotaudepur (R & B) Division, Chhotaudepur (R & B) Division,

Bodeli Chhotaudepur Chhotaudepur