REPAIRS TO STEEL FURNITURE AT AHMEDABAD

Amount

S&F of follwing parts of Almirah Med/small steel with overall Size 4275 sqmm 1270H x 765W x 440D including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete. (FD-67M, FD-1032)

Lock of 50 mm 6 lever

Handle of size 150 mm

Leg of size 440x100 mm

Shelves of size 765x465 mm

Welding (in lieu of stopper) shelves of Almirah med steel complete

Hinges of 150 mm

M&L Spray painting one coat with synthetic enamel paint in side and out side of Almirah Med/small steel after preparation of old painted surfaces of the article and smoothing the surface including denting work (dents) where necessary complete.

S&F of follwing parts of Almirah Steel Large with Shelves of size 1085x920x485 including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete. FD-1031

Lock of 50 mm 6 lever

CP Handle of 150 mm as per Drg.

MS sheet Leg of 485x100 mm size

MS sheet shelves of size 920x485 mm

Welding (in lieu of stopper) shelves of Almirah med steel complete

Hinges of size 150 mm

M&L Spray painting one coat with synthetic enamel paint in side and out side of Almirah Larg steel after preparation of old painted surfaces of the article and smoothing the surface including denting work (dents) where necessary complete.

S&F of follwing parts of Almirah Steel Large 1/2 H x 1/2 S of size 1085x920x485 including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete. FD-1033

Lock of 50 mm, 6 lever

CP Handle of 150mm

MS sheet Leg of size 485x100 mm

Shelves of 920x485 mm of MS sheet

Welding (in lieu of stopper) shelves of Almirah steel complete

Hinges of size 150 mm

M&L Spray painting one coat with synthetic enamel paint in side and out side of Almirah Larg steel after preparation of old painted surfaces of the article and smoothing the surface including denting work (dents) where necessary complete.

S&F of follwing parts of Bed Hard steel with ply wood top and Charpoy IP hard Top including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete. Over all size - 2050x980x830 mm FD/E6/MAP/08 and FD/MAP-II/11

Head rest of 830x250 mm with 18mm thick pre-laminated MDF board Exterior Grade complete.

Foot rest of 830x250 mm with 18mm thick pre-laminated MDF board Exterior Grade complete.

Long rail made out of MS pipe 18 gauge of size 65x25mmx1980mm complete.

Stiffener made out of MS pipe 18 gauge of size 25x25mm and length complete

Plywood top from bed hard/Charpoy IP Hard top of 12mm thick of BWR grade ISI marked confirming to IS 303 of size 2050x980 mm and fixed with 08 Nos. nut & bolts to bed hard complete.

M&L for spray painting one coat of synthetic enamel paint OG/Black to all steel surface after preparation of old painted surface by applying sand paper and filling with putty wherever required to bed hard complete.

S&F of follwing parts of Book Case Steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete. Overall size 1675X840x310 mm FD-1028

CP handle of 150mm

Lock of 50 mm, 6 lever

Glass of 840x360 mm

Welding (in lieu of stopper) shelves of Almirah med steel complete

M&L Spray painting one coat with synthetic enamel paint in side and out side of Book Case steel after preparation of old painted surfaces of the article and smoothing the surface including denting work (dents) where necessary complete.

S&F of follwing parts of chair CB steel with arms and Chair CB Steel without arms including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of Overall size 2696 sqmm 535W x 560D x 900H FD-75(M)

Seats of second class hardwood duly canned with 2mm wide plastic cane of half round in true Godrej pattern complete.

Back of second class hardwood duly canned with 2mm wide plastic cane of half round in true Godrej pattern complete.

Flat iron 25mm x 5mm and 50cm to steel frame below seat to support of wooden seat duly welded to steel frame complete

Arms rest of 350 mm complete.

Top cap of 25 mm of best quality in the same position complete.

Welding to damages/decayed steel frames of chair CB steel with arms complete.

M&L for spray painting to steel frame of chair CB steel with arms and without arms with one coat of synthetic enemal paint best quality after preparation of steel surface complete.

S&F of follwing parts of Chair Computer including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of overall size 1060X700x510mm (FD/E6/MAP/01)

Arms rest of 300 mm fixed to chair computer.

Seat of 510x470x60 mm for computer chair & fixed over 12mm thick hot pressed plywood commercial and shall be upholstered with superior quality fabric and moulded polyurethane foam 75mm thick PVC lipping alround; Rate of cloth shall not less than Rs. 350 RM.

Back of 510x470x60 mm for computer chair & back shall be fixed over 12mm thick hot pressed plywood commercial and shall be upholstered with superior quality fabric and moulded polyurethane foam 75mm thick PVC lipping alround; Rate of cloth shall not less than Rs. 350 RM.

Castor wheel ISI marked of computer chair.

Pedestal assy ISI marked of computer.

Hydraulic assy ISI marked with 600 mm pitch centre dia of computer.

S&F of follwing parts of Chair School With Hand Board including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of overall size 738X585 MM FD/E6/MAP/05

Hand board of size 585 mm x 300 mm

Openable (Hinged on RHS) Table to slide ROD of 25mm for adjustable from existing chair school with hand board

PVC Back & Seat of 738x585 mm

PVC shoes superior quality.

M&L for spray painting one coat of synthetic enamel paint Black to all steel surface after preparation of old painted surface by applying sand paper and filling with putty wherever required to chair school with hand board.

Repair to Chair Varandah as per following description Overall size- 760X600 mm (FD-256)

M&L for welding to broken steel frame of chair verandah by welding machine complete.

Preparation of old painted chair and apply spray painting one coat of paint white synthetic enamel.

S&F of follwing parts of Chair Varandah including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete Over all size- 940x455 mm Map Drg FD No-(FD/MAP-II/06)

PVC sheet of 460x460 mm superior quality ie 1st quality white colour shall be mat pattern complete

PVC back of 460x460 mm superior quality ie 1st quality white colour shall be mat pattern complete.

PVC rubber shoes all as per existing.

M&L for preparing of old surface of chair verndah & applying one coat of synthetic enamel white paint.

S&F of follwing parts of chair writing including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of Overall size 0.0149cm 500x950 mm (FD/E6/MAP/12)

Handle with inner and outer size of 210mm and 230mm respectively and fixed to chair writing.

Cushion seat of 530x450 mm of foam density of 32 D covered with fabric cloth of not less than Rs 300/meter

Cushion back of 530x450 mm of foam density of 32 D covered with fabric cloth of not less than Rs 300/meter

M&L for painting to steel frame of chair writing with spray painting one coat of black synthetic enamel paint best quality after preparation of steel surface complete.

S&F of follwing parts of Charpoy folding IP with Hard Top including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of Over all Size - 1980x900x400 FD-388(R)

Plytop 12mm thick of BWR grade ISI marked confirming to IS-303 of size 1980x900 mm in two pieces and fixed with 10 nos. nut and bolts to charpoy folding IP with hard top.

M&L for spray painting one coat of synthetic enamel paint OG/Black to all steel surface after preparation of old painted surface by applying sand paper and filling with putty wherever required to charpoy folding IP hard top.

S&F of follwing parts of Locker Bed Side steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing of over all size-1100x760x440 (FD-1029)

CP handle of 150mm.

MS sheet leg of 440x110 mm

MS sheet shelves of 760x440 mm shown

Welding (in lieu of stopper) shelves of Locker bedside steel complete.

Hinges of 150mm.

M&L Spray painting one coat with synthetic enamel paint in side and out side of Locker Bed Side steel after preparation of old painted surfaces of the article and smoothing the surface including denting work (dents) where necessary complete..

S&F of follwing parts of Charpoy folding IP with Hard Top including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of Over all Size - 1980x900x400 FD-388(R)

Welding to frame of shoe rack with welding machine after scratching and cleaning the steel surfaces.

Rubber shoes PVC superior quality to legs of shoe rack.

M&L spray painting with one coat of black enamel paint best quality to all exposed steel surface of shoe rack complete.

S&F of follwing parts of Charpoy folding IP with Hard Top including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of Over all Size - 1980x900x400 FD-388(R)

Top of size 900x600 mm made out of 18/19mm thick pre laminated MDF board exterior grade including 4mm thick teak wood beading all round complete.

Rails of 840x25 mm (Front/back/left/right) as per existing shape and size made out of 25mm square MS conduit of 1.60mm in thickness including welding works to fix the rails in the frame complete.

Legs of size 760x25 mm made out of 25mm square MS conduit of 1.60mm in thickness including welding works to fix the legs to the frame complete.

Hard rubber shoes of legs of the table.

M&L spray painting with one coat of black/white/Gray/OG enamel paint best quality to all exposed steel surface of table 3’x2’ with drawer / without drawer complete.

S&F of follwing parts of Table Office Clerk Steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing of overall size- 1230x760x600 mm FD-84(M) & 1004

Table top of 1230x600 mm , 18 mm thick prelaminated MDF board, one side decorative lamination and other side balancing white lamination, exterior grade with 4 mm thick Teak wood beading duly French polished complete.

Drawers of 450x320x100 mm made out of MS sheet of 20 gauge as per existing pattern and size complete.

Rubber shoes PVC superior quality to legs of table offfice clerk steel

M&L for applying one coat of synthetic enamel paint, olive green/gray colour to Table office clerk steel including preparation of old surfaces complete.

S&F of follwing parts of Table Office Officer Steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing of Overall size 1800x1200x760 mm FD-84(M)/1004

Table top of 1810x1200 mm, 18 mm thick prelaminated MDF board, one side decorative lamination and other side balancing white lamination, exterior grade with 4 mm thick Teak wood beading duly French polished complete.

Drawers of 510x355x100 mm made out of MS sheet of 20 gauge as per existing pattern and size complete.

Rubber shoes PVC superior quality to legs of table offfice clerk steel

M&L for applying one coat of synthetic enamel paint, olive green/gray colour to Table office officer steel rest including preparation of old surfaces complete.

S&F of follwing parts of Table Computer including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing Over all size-900x750x600 mm FD/E6/MAP/03

Table top of 900x600 mm , 18 mm thick prelaminated MDF board, one side decorative lamination and other side balancing white lamination, exterior grade with 4 mm thick Teak wood beading duly French polished complete.

Key board of 480x440 mm with telescopic channel of table compute with MDF Prelaminated board exterior grade 18/19 mm thick with teak wood beading all round 4 mm thick with french polished and 1.6 mm thick ISI telescopic channel of same size and shape as per existing pattern.

Drawer / mouse board of 365x220 mm with telescopic channel of table computer and S&F new drawer / mouse board of MDF prelaminated board exterior grade 18/19 mm thick with teak wood beading all round 4 mm thick with french polished and 1.6 mm thick ISI telescopic channel of same size and shape as per existing pattern.

Bottom board of 780x300 mm of table computer and S&F new bottom board of MDF prelaminated board exterior grade with 4 mm thick teak wood beading with french polished all round of same size & shape as per existing pattern.

NOTE: (i) for Replacement, the Size and shape of components of furniture shall be all as per Drg, Specified & directed. (ii) For wooden components replaced shall be 2-3 coats french polished & existing unreplaced components also polished with one coat to match full article furniture & For steel components replaced shall be two coat of syntheic enamel paint over red oxide primer & existing unreplaced components painted with one coat synthetic enamel paint to match full article furniture.. (iii) The article of furniture shall be stacked inside godown neatly after complete repairs. (iv) Teakwood shall be Ist class well seasoned (v) The rate shall be quoted under respective items accordingly.

L.BHIMSEN

Vinayak Distributors

PRAFUL ENTERPRISES

SK INDUSTRIES