Supply and Installation of Motor pump set in the Narassimokku Lift Irrigation Scheme in Agali Grama Panchayath (Proj. 716/21)

Amount

Supply,conveyance,erection,testing and commissioning of 75 HP,10 Stages KARVEL make open well submersible motor and pump set (Model No.75KN) operating on 3Phase,415V, 50HZ, AC supply having a discharge range of 800 LPM against a total head of 260 Mtr.and take trail run etc.complete including all charges.

Supply,conveyance,erection,testing and commissioning of 75 HP manually operated auto transformer starter (Protex make) on suitable angle iron frame work including giving necessary connection etc.complete including all charges.

Supply conveyance and filling of transformer oil for the fully Automatic Oil Immersed Star Delta starter suitable for 7.50HP borewell motor pump set including all charges.

Supply and fixing 25 KVAR , Metalised poly propeline capacitor standard duty, 440V Cylinderical type near to starter and giving necessary connection including all charges.

Supply and providing,laying and fixing of 100mm dia B class Medium G.I.Pipe with specials in ground etc.complete including all charges.

Supply and fixing 100mm sluice valve (heavy type) in the delivery pipe etc.complete including all charges.

Supply and fixing 100mm Non return valve in the delivery pipe etc.complete including all charges.

Supply and fitting 100mm MS flange set (heavy type) with all accessories in the delivery pipe etc.complete including all charges.

Supply and fitting 100mm GI flange washer with all required accessories accessories including all charges.

Supply and fitting 100mm GI bend fabricated with 100mm B class GI pipe etc. complete with all required accessories including all charges.

Fabrication charges of pumping mains pipe etc.complete including all charges.

Supply and fitting Pressure gauge and shefon bend and valve set etc.complete with all required accessories including all charges.

Supply and fitting 100mm bore clamp set etc.complete with all required accessories including all charges.

Supply and Providing MS Beam channel (ISLAB 100 X 50) for clamp support etc.complete with all required accessories including all charges.

Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes. 35 sq mm.(90.6.6.8)

Do - DWC pipe in ordinary soil 0.75m below ground level including excavation 50/38 mm or nearest size (90.12.10.2)

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm. (90.6.10.3)

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet,powder coated (excluding base frame) (90.14.1.1)

Supply and providing 2mm thick SMC sheet as shrouding for bus interconnection/terminations etc. including required nut & bolt etc. (90.14.2.1)

Supply and providing heavy duty 'A' section neoprene gasket in the panel board 'A' section neoprene beeding suitable for 1.60/ 2.00 mm sheet. (90.14.3.1)

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) (90.14.1.1)

Supply and providing 2mm thick SMC sheet as shrouding for bus interconnection/terminations etc.including required nut & bolt etc. (90.14.2.1)

Supply and providing heavy duty 'A' section neoprene gasket in the panel board 'A' section neoprene beeding suitable for 1.60/ 2.00 mm sheet. (90.14.3.1)

Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board.(90.14.5)

Fabrication, supply & fixing main bus bar system and interconnections with electrolytic grade copper strips/rigid conductors conforming to IS1867 (with latestamendments) for bus bar arrangement with single strip per phase supported on finger type bus bar supports of adequate size,spacing between supports not exceeding 50 cm & overhang not exceeding 5cm including bending to shape, drilling holes, tinning the points of contacts, fixing heat shrinkable PVC sleeves,plated bolts and nuts with plate washers and spring washers, copper sockets for round conductors,etc. as required. (90.14.6)

Supply and providing copper earth bus in the panel board.(90.14.7)

Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade 4.00 sq mm PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. od117941/2019_2020

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.250A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC. (90.14.10.14)

Supply and fixing rotary drive kit (including handle with door interlock defeat and pad lock facility) in the existing MCCB of rating 250A.

Do - Spredar/terminal adapter kit extended terminal for 3/4 pole MCCB.(4 Pcs)

Do - Earth fault relay upto 250 - 400A with CBCT and giving connection including all charges.

Do - Shunt release up to 250A - Do -

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 200 Amp TP & N (2.1.6)

Do - 100 Amp TP & N (2.1.3)

LED indicators for all voltage ranges - Blue Colour

LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour

V, A, F, PF meter of accuracy class 1.0

100/ 5 A, 5 VA, 10 P 5, tape wound protection CT

100/ 5 A,5 VA,resin cast metering CT of accuracy class 0.5

Aluminium anodised legend plate of size 100 x 40 mm. with inscription of BUS BAR CHAMBER .

Aluminium anodised legend plate of size 100 x 40 mm. with inscription of CABLE ALLEY.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2 metre long etc. with charcoal/coke and salt as required.(od14959/2019_2020)

Providing and fixing 25mmx3mm G.I strip earth lead from the test joint to the earth plate. (od14961/2019_2020)

Do - 2x25mmx3mm G.I strip test joint for earthing system. (od68978/2018_2019)

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 2.00 copper conductor.(14SWG) (90.16.1.1)

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 6.00 mm copper conductor (4 SWG) 90.16.1.6

Supply and laying of 15mm B class GI pipe(medium class) with all required accessories laid 0.6m below ground level including excavating trench of suitable size and refilling etc.as requiredas protective covering to earth leads. (90.16.2.1)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) (90.16.5.1)

Do - 3.15mm copper earth socket and including crimping etc. as required. (90.16.5.3)

Supply and providing12x3mm brass nut and bolt etc.as required.(od21888/2019_2020)

Supply and providing 25 x 6 mm brass nut and bolt etc.as required.(od20879/2019_2020)

Supply and wiring points using rigid PVC conduit of 20 mm with specials, duly clamped or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping etc.complete with suitable size modular type metal switch boxes, modular type front plates (white) etc.up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete as required.

Single Control light point with 6A, plate ceiling rose - Short point (90.2.1.1 )

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point (90.2.1.4)

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points. (90.2.1.6)

Supply, conveyance installation testing and commissioning the light fittings of following types complete with all accessories and lamps etc. including supplying and fixing ball and socket arrangements on PVC round block, suspension down rod of 19mm dia MS conduit up to 2x30cm length including painting and wiring the down rod with 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connections etc. as required.

1200 mm 1X20W LED Lamp with box type fixture (90.3.24.3)

Supplying and providing extra H.G/ ISI marked, steel conduit down rod of 19/20 mm dia 2 x 1.00 m long with 16/0.20 mm 3 core copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving connection etc. as required. (90.3.10)

Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of LED Street light fitting IP 65,pressure die-cast housing with induvidual LEDs with modular secondary optics 25watts with driver and including all necessary all accessories etc in the existing GI pipe and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required - BAJAJ make BRLEP25W LED/Endura Citylite Platinum 25 LED / osram strada plus/ phillips make.(od20530/2019_2020)

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps.(90.3.18.1)

Supply,conveyance,installation,testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator,wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc.as required.

1200mm sweep - 5star rated ceiling fan complete with 300mm down rod,canopies, shackeles etc. working on 230V/240V single phase A/C (90.4.5.2)

Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.(90.4.1)

Supply and providing every additional length of down rod of 15mm heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required. (od20558/ 2019_2020)

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm. (90.6.10.1)

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

4.00 sq.mm 2 Run (1.17.20)

2.50 sq.mm 2 Run (1.17.11)

S&F following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.3 Module (100mmX75mm) (1.27.2)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet.(1.24.5)

Do - 15/16 amp switch. (1.24.3)

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board,240v,on surface/ recess,complete with tinned copper bus bar, neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/RCCB/ Isolator, 8way, Double door. (2.3.2)

Supplying and fixing following rating,double pole,240volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required.40 amps. (2.12.1)

Do - double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps (2.14.1 )

Do - 5 amps to 32 amps rating, 240/415 volts, "C" curve, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. (2.10.1 )

Do - 6A to 32A ratings DP MCB "C" curve,10 kA breaking capacity - Do - (2.10.3)

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages,colour washing etc.as required. 3.5 core x185 sq mm with factory made clamp (90.12.7.34 )

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 50 sq mm with factory made clamp. (90.12.41.11)

Supply and making end termination with brass compression gland with earth clips and aluminium lug socket for 3.5 core x185 sq mm (57mm) PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required.(9.1.27)

Do - 3 corex50 sqmm.( 32mm) (9.1.11)

Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for 3.5 core x185 sq mm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. (9.2.24)

Supply and fixing meter board of size 650x350x250 of Syntex type suitable for providing 3 Phase meter board and CT. (od4600/2019_2020)

Supplying and fixing 250A HRC Fuse Base with HRC Fuse link (DIN type)with connections in existing meter board.

Do - 250A,2 way neutral link mounted on DMC/SMC base with connections in existing meter board.

Do -100/5 A, 5 VA, accuracy class 1, Resin Cast Metering CT - Do -

Supply & installation of dust and vermin proof, 1 Phase Sintex Meter Board( GS-MB- 3525 (350x250x150)) including p/f 32 A HRC Fuse Base with HRC Fuse link ,32 A neutal link and to fix KSEB meters, etc as required including fixing it on wall, making good the damages colour washing etc. as required. (od14963/ 2019_2020.)

Supply,fabrication,conveyance and fixing the following sizes of B class GI pipe bent to shape/cut and welded to shape and fixing the same to wall/parapet using clamps as noted along with each size,painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer,making good the damages,colour washing etc.as required. 50mm dia with clamps made from 25 x 3 mm MS flat. For Srevice Pipe.(90.3.18.)

Do - 25 mm dia with HG company fabricated clamps. For Srevice Pipe.(90.3.18.1)

Supply and providing M8 anchor bolt hook in wall / parapet for binding support for service main.

AYAPPA ELECTRICALS

Bidder Name

RAMAN.V

AYAPPA ELECTRICALS