Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹75.8 LAccepted-AOC | L1 | Accepted-AOC BELOW RATE | |
| 2 | L2₹79.6 L+₹3.8 L (5.00%)Rejected-AOC 184 KEELA STREET NEIKULAM NEDUNGUR LALGUDI 621105 | TIRUCHIRAPPALLI | TAMIL NADU | 621105 | L2 | Rejected-AOC ABOVE RATE |
| Sl No | Description | Qty | Unit | A S POWER SOLUTIONS L1 | ASV CONSTRUCTION L2 |
|---|---|---|---|---|---|
| 1.00 | Supply and delivery 15000 LPM x 60 Head of Vertical type water statically, dynamically, hydraulically balanced turbine pump capable of discharging the following duty condition as given below due to all causes with surface discharge head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 (Reaffirmed 2011 ) and as amended thereafter to suit the site condition. The speed, No. of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratchet pin housing safety clutch, suction strainer etc. The Pump Bowl assembly shall be with bronze impeller running at 1450 rpm. The pump includes suitable head shaft, suitable 1.5 metre long SS line shaft required Nos. to suit the well depth, Rubber line shaft bearing of required Nos., C.I Bearing retainer of required Nos., 100 litre HDPE Pre- lubricating tank with 20mm PVC Rigid pipe connection along with GM gate valves, Suitable ERW column pipe of each 1.5m long of required Nos. to suit the well depth, Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft -2 set and Spanner - 1 set etc complete | 2 | Nos | 19,13,043 ₹38,26,086 Lowest | 19,50,000 ₹39,00,000 |
| 2.00 | Supply and delivery 200 KW x 270 HP of vertical Hollow/Solid shaft Squirrel cage induction motor (IS 325) suitable for the above pump continuous rated TEFC/SPDP type with Class ‘F’ insulation for operation in AC, three Phase/50 HZ (±5%), 415V (±10%) running with a speed of pump noted above and with inbuilt thrust bearing assembly capable of taking up the entire load and non - reverse ratchet assembly etc., complete. The motor rating noted above is the minimum and shall be such that it should never be over loaded when the pump works at MWL condition and shall be 10% over and above the maximum HP absorbed by the pump. The motor offered should be energy efficient to have maximum efficiency at high power factor. Separate thrust bearing assembly could also be supplied to take up the down load. | 2 | Nos | 13,21,996 ₹26,43,992 Lowest | 13,50,000 ₹27,00,000 |
| 3.00 | Erection of water Lubricated vertical turbine pump with motor at site of work including preparation of suitable foundation and bed, fabrication of packer plates from raw materials , cutting required shims , assembling and joining of all required loose components such as bowl assembly, impellor shaft, line shaft, column pipes , head soft, discharge head, bearings, drive unit, delivery side pipes , suitable tappers required valves and specials, pressure gauges and flow meters , adjustment of pump shaft and leveling and alignment checkup greasing of relevant components, grouting of foundation bolts and sole plate with non shrink grout materials of conbextra GP-2 cement erection, connecting the relevant electrical cables with motor properly etc. complete and testing the out put and efficiency, site performance test for noise and vibration and trial run for minimum 10 days and commissioning satisfactorily for the various HP of the vertical turbine pumpsets as given below per IE rules as directed by TWAD Board officers . | 2 | Nos | 2,24,888 ₹4,49,776 Lowest | 2,40,000 ₹4,80,000 |
| 4.00 | Removal 150 HP motor of the existing old motor in nerur Including connected accessories and crane hire charges, transporting charges and hand over the removed matrials to head water works stores.etc. complete | 2 | No | 99,950 ₹1,99,900 Lowest | 1,50,000 ₹3,00,000 |
| 5.00 | Supply, delivery of rubber bearing size of ID30mm to 50 mm x OD 75 mm to 90 mm x 175 mm length with suitable groove for shaft cooling as per standard specification ect. Complete. | 4 | Nos | 2,789 ₹11,156 Lowest | 3,500 ₹14,000 |
| 6.00 | Supply, delivery of rubber insertion sheet etc. Complete.,as directed by the departmental officers ect. Complete. | 8 | kgs | 108 ₹864 Lowest | 150 ₹1,200 |
| 7.00 | Supply and delivery of 20 mm dia and 90mm to 120 mm length of MS bolt & nut with two plate washers for column pipe as directed by the departmental officers ect.Complete., at site. | 8 | kgs | 130.5 ₹1,044 Lowest | 200 ₹1,600 |
| 8.00 | Labour charges for through cleaning of the spiders, column pipes, shafts, discharge case,sole plate, motor bed including charges for consumables etc.complete . | 2 | Nos | 13,793 ₹27,586 Lowest | 15,500 ₹31,000 |
| 9.00 | Servicing of the bowl assembly by removing of all wornout bushes by using hydraulic press and recondition of impeller guide portion. Providing new lock set with SS bolt and impeller cotter keys . including lathe work charges, loading,unloading and transport charges etc. complete,. | 2 | Nos | 16,792 ₹33,584 Lowest | 20,000 ₹40,000 |
| 10.00 | Removal 100 HP motor of the existing old motor in nerur Including connected accessories and crane hire charges, transporting charges and hand over the removed matrials to head water works stores.etc. complete | 2 | Nos | 92,454 ₹1,84,908 Lowest | 95,000 ₹1,90,000 |
Tender Value
₹97.5 L
EMD Value
₹97,500
Closing Date
4 Sept 2025, 3:00 pmClosed
Commissioner
Azad Road Karur
Supply, delivery, testing and commissioning of 15000LPM x 60 M Head of vertical Hollow/Solid shaft Squirrel cage induction motor and pump set at Nerur Head Works and 150 hp vertical turbine pump Lifting, at Balamalpuram Sump for karur corporation
2025_MAWS_599044_2
E1/3312/2025
Open Tender
Civil Works
Item Rate
180 days
KCMC
Refer Tender Documents
3 documents required · 3 mandatory
₹0
₹97,500
29 Nov 2025
30 Aug 2025
4 Sept 2025
30 Aug 2025
4 Sept 2025
30 Aug 2025
30 Aug 2025 - 4 Sept 2025
Amount
Supply and delivery 15000 LPM x 60 Head of Vertical type water statically, dynamically, hydraulically balanced turbine pump capable of discharging the following duty condition as given below due to all causes with surface discharge head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 (Reaffirmed 2011 ) and as amended thereafter to suit the site condition. The speed, No. of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratchet pin housing safety clutch, suction strainer etc. The Pump Bowl assembly shall be with bronze impeller running at 1450 rpm. The pump includes suitable head shaft, suitable 1.5 metre long SS line shaft required Nos. to suit the well depth, Rubber line shaft bearing of required Nos., C.I Bearing retainer of required Nos., 100 litre HDPE Pre- lubricating tank with 20mm PVC Rigid pipe connection along with GM gate valves, Suitable ERW column pipe of each 1.5m long of required Nos. to suit the well depth, Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft -2 set and Spanner - 1 set etc complete
Supply and delivery 200 KW x 270 HP of vertical Hollow/Solid shaft Squirrel cage induction motor (IS 325) suitable for the above pump continuous rated TEFC/SPDP type with Class ‘F’ insulation for operation in AC, three Phase/50 HZ (±5%), 415V (±10%) running with a speed of pump noted above and with inbuilt thrust bearing assembly capable of taking up the entire load and non - reverse ratchet assembly etc., complete. The motor rating noted above is the minimum and shall be such that it should never be over loaded when the pump works at MWL condition and shall be 10% over and above the maximum HP absorbed by the pump. The motor offered should be energy efficient to have maximum efficiency at high power factor. Separate thrust bearing assembly could also be supplied to take up the down load.
Erection of water Lubricated vertical turbine pump with motor at site of work including preparation of suitable foundation and bed, fabrication of packer plates from raw materials , cutting required shims , assembling and joining of all required loose components such as bowl assembly, impellor shaft, line shaft, column pipes , head soft, discharge head, bearings, drive unit, delivery side pipes , suitable tappers required valves and specials, pressure gauges and flow meters , adjustment of pump shaft and leveling and alignment checkup greasing of relevant components, grouting of foundation bolts and sole plate with non shrink grout materials of conbextra GP-2 cement erection, connecting the relevant electrical cables with motor properly etc. complete and testing the out put and efficiency, site performance test for noise and vibration and trial run for minimum 10 days and commissioning satisfactorily for the various HP of the vertical turbine pumpsets as given below per IE rules as directed by TWAD Board officers .
Removal 150 HP motor of the existing old motor in nerur Including connected accessories and crane hire charges, transporting charges and hand over the removed matrials to head water works stores.etc. complete
Supply, delivery of rubber bearing size of ID30mm to 50 mm x OD 75 mm to 90 mm x 175 mm length with suitable groove for shaft cooling as per standard specification ect. Complete.
Supply, delivery of rubber insertion sheet etc. Complete.,as directed by the departmental officers ect. Complete.
Supply and delivery of 20 mm dia and 90mm to 120 mm length of MS bolt & nut with two plate washers for column pipe as directed by the departmental officers ect.Complete., at site.
Labour charges for through cleaning of the spiders, column pipes, shafts, discharge case,sole plate, motor bed including charges for consumables etc.complete .
Servicing of the bowl assembly by removing of all wornout bushes by using hydraulic press and recondition of impeller guide portion. Providing new lock set with SS bolt and impeller cotter keys . including lathe work charges, loading,unloading and transport charges etc. complete,.
Removal 100 HP motor of the existing old motor in nerur Including connected accessories and crane hire charges, transporting charges and hand over the removed matrials to head water works stores.etc. complete
Charges 150 HP motor for re erection of of motor pump set. Such as Motor ,thrust bearing assembly , motor stool, discharge case ,top shaft , shaft coupling , column pipes, line shafts, Bowl assembly and spiders . including no load and load test for specified period etc.complete,.as directed by the dept. officers.
Conveyance of power pumpset (centrifugal, jet and submersible) and its accessories from divisional stores to site of works. (Nerur to balamalpuram)
ASV CONSTRUCTION (BID ID -1447875)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .