Repairing And Renovation Of Compound Wall At Tp-2 Area At Ghatlodiya Ward North West Zone

Sr. Qty Items Rate Per Amount Rs.

1 12.00 Excavation for foundation up to1.5 m depth including 201.81 Cmt

sorting out and stacking of useful materials and

disposing of theexcavated stuff upto 50 Meter

lead.(A) Loose or soft soil (EXECUTED WITH

2 3.00 Excavation for foundation for depth from 1.5 m to 222.72 Cu.M.

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil (EXECUTED WITH

3 5.00 Filling available excavated earth (excluding rock) in 129.1 Cmt

trenches, plinth, sides of foundations etc. in layers

not exceeding 20 cm. in depth consolidation each

deposited layer by ramming and watering.

4 5.00 Filling in foundation and plinth with murrum or 286.2 Cmt

selected soil in layers of 20 cm. thickness including

watering, ramming and consolidating etc.

5 3.00 Providing and laying cement concrete1:5:10 (1- 2492.51 Cmt

Cement: 5- coarses sand and:10-hand broken stone

aggregates 40mm nominal size) and curing complete

excluding cost of formworkin (A) Foundation and

Plinth (upto 10 ton).

6 10.00 Providing and laying cement concrete1:4:8 (1- 2653.67 Cmt

Cement: 4- coarses and:8-hand broken stone

aggregates 40mm nominal size) and curing

complete excluding cost of formworkin (A)

Foundation and Plinth (upto 10 ton).

7 10.00 Providing and laying cement concrete work 1:2:4 (1- 3923.53 Cmt

Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding

cost of formwork and reinforcement for reinforced

concrete work in (A)

Foundations, footings, Base or columns and Mass

8 2.00 Providing and laying in position Ready Mixed M- 3790.21 Cum

150 grade concrete for reinforced cement

conctere work, using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to site

of work intransit mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

centering shuttering finishing and reinforcement

including cost of admixtures inrecommended

proportions as per IS:9103 to accelerate/

retard setting of concrete, improve work ability

without impairing strength and durability as per

direction of theEngineer-in-charge. Without Fly Ash

(Min cement level as per latest IS456 shall be

maintained) (Cement level 320 kg )

9 2.00 Providing and laying controlled cement concrete 3977.88 Cu.M.

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

work in (A) Foundations, footings, Base ofcolumns

and Mass concrete

10 75.00 Brick work using common burnt clay building 3981.21 Cmt

brickshaving crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(B)Conventional

11 10.00 Extra for brick work in superstructure above plinth 272.25 Cmt

level upto floor two level (B) Conventional

12 60.00 Half brick masonry in common brunt clay building 583.49 Smt

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:5 ( 1- Cement :

coarse sand ) in foundation and Plinth conventional

brickwork (up to 10 ton)

13 10.00 Extra for half brick masonry in super structure 52.8 Smt

above plinth level upto floor two level (B)

14 5.00 Providing formwork of ordinary timber planking soas 171.68 Smt

to give a rough finish including centering uttering

strutting and propping etc. Height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the ame

for in situ reinforced concrete and plain concrete

work in. (A) Foundations Footings Bases of lumns

etc. and Mass concrete.

15 5.00 Providing and fixing M.S. round or square bars with 68.53 kg

M.S. flats at required spacing in wooden frames of

windows and clerestory windows.(upto10 ton)

16 5.00 Providing and fixing M.S. grills of required pattern to 100.17 kg

wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square

or round bars with round headed bolts and nuts or

by screws (A) Plain Grill. (upto 10 ton)

17 5.00 Providing and fixing M.S. grills of required pattern to 143.64 kg

wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square

or round bars with round headed bolts and nuts or

by screws (A) Ornamental Grill. (upto 10 ton)

18 600.00 Providing & Fixing M.S.Grill, Gate, Elevation Element 91 Kg

Of Decorative Pattern With M.S.Channel, Flat,

Medium Grade M.S.Pipe, Square Or Round Bars

With Round Heanded Bolts, Nuts, Or By Screw. Incl.

Applying One Coat Zinc Primer And Two Coat Of

Oil Paint Etc.Comp.

19 1.00 Providing and fixing glazed louvered glass 4102.54 Smt

windows and ventilators with teak wood frame

cm. x 7 cm. size including 3 coats of oil painting to

wood work etc.complete. (upto 10 ton)

20 2.00 Providing and fixing 30 mm thick FACTORY MADE 1135.02 Smt

SOLID PANEL PVC DOOR SHUTTER consisting of

frame made out of M.S.tubes of 19 gauge thickness

and size of 19 mm x 19 mm for stiles and 15 mm x

mm for to p and bottom rails.M.S. frames hall have a

coat of steel primers of approved make and

manufacture, M.S. frames hall be covered with

mm thick heat moulded PVC ‘C’ channel of size

30 x 50 mm formings tiles, and 5 mm thick 75 mm

wide PVC sheets for to prail, lock rail and bottom rail

on either side, and 10 mm (5 mm x 2) thick, 20 mm

wide cross PVC sheet as gap insert for to p rail and

bottom rail, Panelling of 5 stiles and rails with

mm wide x 5 mm thick PVC sheet beading on

eighter side, and joined together with

solventcement adhesive,. An additional 5 mm thick

PVC strip of 20 mm width is to be stculkon the

interiors ide of the ‘c’ channel using PVC

solventcement adhesive etc. complete as per

direction of Engineer incharge, manufacture’s

specification and drawing.

21 2.00 Providing and fixing in position collapsible steel 5391.23 Sq.M.

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonal 20 x6 mm size with top

and bottom rails T iron 40 x 40 x 6 mm with 38 mm

dia steel pulleys complete with bolts, units, locking

arrangements, stoppers, handles, including a priming

coat of red lead paint & approved make.

22 1.00 Providing and fixing 1 mm thick M.S. sheet sliding 3652.12 Sqm

shutters with frame and diagonal braces of 40x40x6

mm angle iron, 3.15 mm M.S.gusset plates at

Junctions and corners 25 mm dia. pulley,

40x40x6 mm angle and T-iron huide rail at top and

bottom respactively with handles, stoppers and

locking agangement etc, including applying a priming

coat of red lead paint. (upto 10 ton)

23 2.00 Providing & Fixing in position Alluminium doors with 2900 Smt

frame using approved quality anodised extruded

alluminium section as approved by Engg.in

charge(Jindal alluminium) (a) Frame sections

101.6x44.45 mm (b) Shutter bottom vertical & top

section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt)

(c) Shutter bottom section at 114.3x44.45 mm at

(1.37kg/mt) Shutter middle section at 100x44.3

wt.(1.37 kg/mt) incl.providing & installing 5 mm

thick approved color Acrylic sheet of standard

quality fixed with glazing chips on upper pannel &

Laminated sheet on lower pannel (wtt.0.13

kg/Rmt) etc.comp.as direction of engg.in

24 3.00 Providing and fixing extruded aluminum window 2119.14 Sq. M.

having extruded aluminum Colour Powder Coated

section frame main outer size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm @ Wt.

1.205 Kg/mt,vertical member of size 122.20mm x

31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt,vertical member of size

with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to

frame as per details etc

25 1.00 Providing & Fixing in position Alluminium vents with 1950 Sq. M.

frame using approved anodised extruded alluminium

section as approved by Engg. In charge.(Jindal

alluminium) units equivalent Approved Rate)Frame

section of 63.50 x 38.50 mm. (wt. 0.68Kg/Rmt) incl.

Providing & Installing 5 mmthick approved color

Acrylic sheet of standard quality etc. comp.

26 2.00 Providing and fixing standared extruded of 1163.92 Sq. M.

alluminium section of size 63 mmx38.10 mmx1.2 mm

(Jindal Section:2434, @ Wt.0.643 Kg/mt) with

colour anodized alluminium frame for ventilation

with 5 mm thick frosted glass as details etc complete

for Ventilation

27 10.00 Providing and laying white glazed tiles 6mm thick in 908.17 Sq.M.

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

28 10.00 Providing and laying Ceramic tiles 6 mm thick in 960.47 Sq.M.

flooring treads of steps and landing laid on a bed of

12 mm thick cement mortar 1:3 (1- cement :3-

coarses and) finishing with flush pointing in white

cement.(upto 10 ton)

29 3.00 Providing and laying Vitrified tiles 8 to 10 mm thick, 1469.91 Sq.M.

36''x36'' in flooring treads of steps and landing laid

on a bed of 12 mm thick cement mortar 1:3 (1-

cement:3-coarses and) finishing with flush pointing

inwhite cement. (upto 10 ton)

30 3.00 Providing and laying Vitrified tiles 8 to 10 mm thick, 1130.15 Sqm

24''x24'' in skrting risers of steps and dedo on 10 mm

thick cement plaster 1:3 (1- cement: 3-coarse

sand) and jointed with white cement slurry (upto

31 5.00 Providing and laying Vitrified tiles 8 to 10 mm thick, 1523.61 Sqm

in skrting risers of steps and dedo on 10 mm thick

cement plaster 1:3 (1-cement:3- coarse sand) and

jointed with white cement slurry (upto 10 ton)

32 25.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 1261.58 Sq. M.

20 mm (average) base of cement mortar 1:6 (1

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

33 3.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 1383.99 Sq. M.

20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

34 10.00 Providing and laying polished granite stone slab 18 2672 Sq.M.

mm thick in risers of steps, dedo and pllars laid on

mm thick cement mortar 1:3 (1 cement : 3 coarse

sand) and jointed with gray cement slurry including

rubbing & polishing etc. complete.

35 1.00 Providing and laying marble stone slab flooring over 2194.63 Sq.M.

20mm (average)base of cement mortar 1:6 (1-

cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty :

1.5 - coarse sand) laid and jointed with gray cement

slurry including rubbing and polishing complete. (A)

Marble slab 25mm thick

36 2.00 Providing and laying polished Kota stone slab flooring 1085.48 Sq.M.

over 20 mm (Average) thick base of cement mortar

1:6 (1-cement:6-coarses and) or L.M.1.1.5 laid over

and jointed with grey cement slurry including

rubbing and polishing etc.complete. (B) 30 mm thick

37 2.00 Providing and laying polished kota stone slab 25 mm 1176.03 Sq.M.

thick in risers of steps, skirting Dedo and pillars laid

on 10 mm thick cement mortar 1:3 (1- Cement :3

coarses and) and jointed with gray cement slury

mixed with pigment to match the shade of slab

including rubbing and polishing etc.complete. (upto

38 2.00 Providing and fixing pre-cast concrete kerb 358.06 Rmt

stone of gray cement based concrete block 30 cm

length, 30 cm height and 15 cm thick of M250 grade

concret as per approved design and including

excavation for fixing in proper line and level, filling

the joint with C:M 1:3 (1 cement :3 fine sand) etc

complete. (upto 10 ton)

39 10.00 Providing and laying broken china mosaic flooring 739.89 Sqm

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain

or slope and to be tempered to bring mortar creme

out upto surface using white cement including

rounding off junctions and extending them up to15

cm along the wall, clearing with water and

oxalic acid etc .asdirected.

40 3.00 Providing and laying coloured glazed tiles of the 1426.95 Sqm

size 300 mmx200 mmx8 mm/300 mmx450 mmx8

mm in skirting, risers of steps and dedo on 10 mm.

thick cement plaster 1:3 (1cement: 3 coarse sand)

& jointed with white cement slurry.

41 40.00 Providing corrugated G.I. sheet of class-3 roofing 719.93 Sqm

fixed with glavanished iron J or L Hooks, Bolts and

nuts 8 mm diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead

complete excluding the cost of purlins, Rafters and

Trusses. (1) 0.80 mm thick sheet.(up to10 ton)

42 3.00 Providing ridges or hips 600 mm over allin plain G.I. 635.58 Sqm

sheet class-3 fixed with G.I. J or L Hooks and nuts

mm dia G.I. Limpet and bitumen washer complete.

43 5.00 Providing and fixing 150 mm wide 450 mm over all 555.71 Sqm

semi circular plain G.I.sheet class-3 gutter with Iron

brackets 40 mmx3 mm size Bolts, Nuts, washers

etc. including making necessary connection with

rain water pipes. (i) 0.80 mm thick

44 7.00 Providing and fixing on wall face C.I. Rain water pipe 283.62 Rmt

including filling the joints with spun yarn soaked in

neat cement slurry and cement mortar 1:2(1-

Cement : 2-fine sand) (A) 75 mm dia.

45 110.00 Providing 15 mm thick cement plaster in single coat 174.83 Sqm

on Rough (Similar) side of single or half brick walls

for interior plastering up to floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-

cement :3-sand)

46 100.00 20mm thick sand faced cement plaster on walls upto 297.68 Sqm

height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

47 70.00 Colour washing with lime on wall surface (two coats) 12.29 Sqm

over and including a primary coat of white washing

to give an even shade after through brooming the

surface to remove all dirt, dust, mortar drops and

other foreigh matter.

48 40.00 Removing dry or oil bound distemper by a 11.19 Sqm

washing and scraping and sand papering the wall

surface smooth including necessary repairs to

scratches complete.

49 12.00 Distempering with dry distemper of approved brand 46.94 Sqm

and manufacture (two coats) and of required shade

on wall surfaces of given an even shade, over and

including a priming coat of whiting after

thoroughly brooming the surface free from mortar

dropping and other foreign matter.

50 15.00 Distempeing (Two coats) with oil bound distemper 76.08 Sqm

of approved brand and manufacture and of

required shade on wall surfaces to give an even

shade, over and including a priming coat with

distemper primer of approved brand and

manufacture after thoroughly brushing the

surface free from mortar dropping and other

foreign matter and also including preparing the

surface even and sand papered smooth.

51 15.00 Extra Coat for Above Item over above for every 30.09 Sqm

subsequent coat of approved brand and

52 40.00 Wall painting (two coats) with plastic emulsion paint 78.44 Sqm

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

53 40.00 Extra over item for every sub sequent coat of wall 33.39 Sqm

painting with plastic emulsion paint of approved

54 10.00 Extra over item for painting with plastic emulsion 5.36 smt

paint of approved brand on ceilings and sloping

55 10.00 Applying priming coat over new steel and other 34.34 Sqm

metel surface after and including preparing

the surface by throughly cleaning, oil, grease, dirt

and other foreign matter and scoured with

brushes fine steel wood, scrapers and sand paper

with ready mixed priming paint brushing red lead.

56 15.00 Painting two coats (excluding priming coat) on 86.94 Sqm

new steel and other metal surface with enamel

paint, brushing, interior to give an even shade

including cleaning the surface an even shade

including cleaning the surface of all dirt, dust and

other foreign matter.

57 50.00 Painting one coats (excluding priming coat) on 54.35 Sqm

previously painted steel and other metal surface with

enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and

other foreign matter.

58 30.00 Extra over item for every sub sequent coat of paint. 50.4 Sqm

59 25.00 Painting two coats (excluding priming coat) on 64.66 Sqm

new steel and other metal surface with synthetic

enamel paint, brushing to give an even shade

including cleaning the surfaceofalldirt,dust and other

foreign matter.

60 45.00 Painting one coats (excluding priming coat) on 43.79 Sqm

previously printed steel and other metal surface with

synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust

and other foreign matter.

61 5.00 Extra over Above item for every sub sequent coat 43.47 Sqm

62 50.00 Painting two coats (excluding priming coat) on 20.16 Sqm

external surface of new rain water, soil, waste and

vent pipes and fittings with ready mixed

bituminous brushing, black, anti corrosive to give

an even shade including cleaning of all dirt, dustand

other foreign matter.(75 mm dia)

63 10.00 Painting two coats (excluding priming coat) on 25.05 Sqm

external surface of new rain water, soil, waste and

vent pipes and fittings with ready mixed

bituminous brushing, black, anti corrosive to give

an even shade including cleaning of all dirt, dust and

other foreign matter.(100 mm dia)

64 150.00 Finishing wall with weather proof exterior emulsion 113.4 Sqm

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

65 40.00 Applying two coats of Birla (white cement based) or 40.19 Sqm

Asian (acryliclapy-putty) or equivalent & two coats of

primer of approved brand and manufacture on new

wall surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

66 2.00 Demolition including stacking of serviceable 1047.38 Cu.M.

materilas and disposal of unserviceable materials

with all lead and lift. (i) R.C.C. work

67 20.00 Demolition of Brick work and stone masonry 544.95 Cu.M.

including stacking of serviceable materil as and

disposalof unserviceable materials with all lead and

lift.(ii) In Cement Mortar.

68 3.00 Dismentaling tiled of stone floors laid in mortar 47.25 Sqm

including stacking of serviceable materil as and

disposal of unserviceable materials with all lead and

69 3.00 Dismentaling of sheet roofing including ridges, 47.25 Sqm

Hips, Valleys, Gutters etc. stacking of serviceable

materil as and disposal of unserviceable

materials with all lead and lift.(i) G.I.sheet roofing.

70 1.00 Dismentling steel work including distempering and 3.63 Kg.

stacking the materials with all lead and lift.

71 1.00 Dismentling doors, windows, ventilators etc. (wood 185.85 Each

or steel) shutters including chowkhats architraves,

hold fasts and other attachment etc. complete and

stacking the material within all lead and lift.(i) Not

exceeding 3 Sq.M. in area.

72 2.00 Dismentling doors, windows, ventilators etc. (wood 248.85 Each

or steel) shutters including chowkhats

architraves,hold fasts and other attachment etc.

complete and stacking the material with in all lead

and lift.(ii) Exceeding 3 Sq.M.in area.

73 30.00 Dismentling barbed wire in fencing including making 66.15 Rmt

rolls and also including dismentling fencing posts

including all earth work concrete in base and

making good the disturbed ground stacking useful

materials as directed and disposing as directed and

disposing of the unserviceable materials with all lead

74 3.00 Dismentling C.I. pipes G.S.W. pipes abd A.C. rain 74.03 Rmt

water pipes with fittings and clamps including

stacking the materials with all lead and lift (for any

75 1.00 Dismantling santtary fittings like wash basin . W.C. 401.63 Each

pan Indian and Europe an type, flushing tank etc.

including stacking the materials with all lead and lift

76 20.00 Scraping oil paint from steel and other metal surface 48.83 Smt

and making the surface even (with Hand

77 150.00 Removing and scraping of old deteriorated plaster 19.38 Smt

of any thickness from wall / R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

78 25.00 Providing and fixing 1.20 Metre high fencing with 385.4 Rmt

2.0 Metre long M.S. Angle posts 40 mm x 40 mm x

mm and oil painting 3 coats fixed at 2.5 Mt, C/c.

with five Horizontan lines and two diagonals of

galvanised steel barbed wire weighting 9.38 Kg. per

100 Metre, strained and fixed to posts with G.I,

staples including fixing the posts in ground with

M x 0.5.M x 0.5 M. block in C.C 1:5:10 etc complete.

79 40.00 Renovation and Repairing work in Chainlink fencing 735 Rmt.

any size and also refixing work incl. febrication work

with all materails to be painted one coat of primer

and twocoats of paint as directed inline and level.

80 2.00 Providing and fixing cast iron (Spun) Nahni trap of the 600.08 Each

following nominal diameter of self cleaning design

with C.I. screaed down or higned grating including

cost of cutting and making good the walls and floor

100 mm inlet and 50 mm outlet.(C)100mm dia.

81 1.00 Providing and fixing water closet squatting Pan 926.1 Each

(Indian type W.C.Pan) size 580 mm (Earth work,

bed concrete, foot rest and trap to be measured

and paid for separately) (A) Vitreous China. (I)Long

pattern = White colour

82 1.00 Providing and fixing wsh down water closet (Europe 1290.8 Each

an type, W.C.Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar1:1

(1- Cement:1-fine sand) (Seal and cover to be

measured and paid forseparately) (A) vitreous China

Pattern :(i) in white colour

83 2.00 Providing and fixing 100 mm size P or S trap for 311.85 Each

water closet squatting pan including jointing the trap

with the pan and soil pipe in cement Mortar1:1 (1-

Cement : 1-Fine sand)(A) Vitreous China.Pattern in

84 1.00 Providing and fixing wash basin with single hole for 1400.18 Each

pillar tap with C.I.or M.S. brackets painted white

including sutting holes and making good the same

but excluding fittings. (A) Vitreous China: (ii) Flat

Back wash basin 550 mm x v 400 mm size.(i) In white

85 2.00 Providing and fixing screw down bib taps of following 184.98 Each

size.(A) Brass screw down bib tap polished bright. (i)

86 2.00 Providing and fixing pillar tap, capstan head, screw 305.67 Each

down high pressure with screws, shanks and back

nuts. (i) 15mm dia

87 1.00 Providing and fixing Gun metal check or non-return Each

fullway wheel valve.

88 2.00 Providing and fixing Gun metal check or non-return 201.8 Each

fullway wheel valve.(B) 20mm dia.

89 2.00 Providing and fixing Urinal or approved quality 1026.01 Each

including conecting the Urinal with waste pipe , tap

etc.complete. (A) White earthen ware flat back or

corner type size 430mm x 260mm x350mm.

90 1.00 Providing and fixing Urinal of approved quality 1535.63 Each

including connection with trap and with integral

longitudinal flush pipe. (A) Squating plate pattern

white earthen ware 550mm x 300mm.

91 20.00 Providing laying and jointing in true line and level 15 71.93 Rmt

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with solvent, including cost of all

materials.adhesive

92 10.00 Providing laying and jointing in true line and level 25 90.93 Rmt

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX orequivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

93 5.00 Providing laying and jointing in true line and level 32 117.97 Rmt

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

94 4.00 Providing laying and jointing in true line and level 40 146.65 Rmt

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

95 40.00 Providing in line level plumb, fabricating and fixing 390 Rmt

three row horizontal barbed wire fencing and

punched tape concertina coil of 9 turns per meter of

610 mm dia fixed with clips on top of the angle iron

posts. The punched tape concertina coil having sharp

barbs at every 25 mm spacing shall be 0.5 mm thick

and 19 mm width and weighting 13 kg/100 mt.

(Average) as per manufacture's specification. The

rate shall also include providing and fixing

mt.total long MS angle 40 x 40 x 6 mm @3.00 mt.c/c

spacing embaded in RCC column, angle posts shall be

painted with one coats of red oxide and two coats of

enamel paint of approved quality at top compound

96 10.00 Providing & Fixing 3 mm thick F.R.P.sheet of 1930 SqM

Approved Quality & Color / Pattern as per

Consultant's design also includes required fabrication

structure in the grid of 2'-0x2'-0 size using hollow

pipe of16 gauge & size 2"x1" & 1"x1" ,G.I. & Bitumen

Washers, Silicon paste application for fixing the sheet

. Rate also includesnecessary bending, cutting, labor

charges , Zinc Primer coat & Two coats of oil painting

of color as approved by consultants & making good

the wall. (N.S.)

97 2.00 Providing 2 mm thick F.R.P. Gutter with necessary 400 Rmt

M.S. Supporting Brackets. (N.S.)

98 2.00 Providing & Supplying JCB Machine on rental basis in 600 Hrs.

case of emergency situation and break down type

work & also during unavoidable condition as per

instruction of engg.incharge , rate includes all nece.

shifting, fuel and operating charges and stacking of

useful & non-useful materials separately up to store.

(No payment should be allowed for non working

condition of machinery and for pipe line excavation

and laying work) ( Based on Previously approved rate

99 60.00 Providing cement vata (10cm. x 10 cm. size) quarter 23.45 Rmt

round in cement mortar 1:1 including neat cement

finishing, watering etc. complete.

100 1.00 Providing and Fixing 1 H.P. Electrical monoblock or 6800 Set

submarcible water pumps withmotor and required

cable and switch board of approved brand and make

etc.comp.as directed.

101 180.00 Providing TMT Bar FE 415 reinforcement for R.C.C. 66.59 Kg.

work including bending, binding and placing in

position complete upto floor two level

102 30.00 Conveyance charge of Earth,Lime, Murrum, building 235.51 Cu.M.

rubbish earch manure or sludge and excavated rock

and fly ash,aggregate of any kind etc.comp.upto 5 km

103 35.00 P/M/F chainlink jali 8'x4' size as per details sketch & 1230 Rmt

instructionof engineer in charge same as lal darwaja

garden pattern consisting of 3'dia. M.S black pipe 'A'

class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of

9"x9"x9" size chain link jali of size 2"x2"x10 gauge

fixed in 35x35x5 mm MS angle frame 8'x4' size with

MS flat of size 25x3 mm welded jali etc.comp.The jali

is to be welded to MS pipe with MS flat as instruction

given.The M.S pipe and the M.S angle frame are to

be painted one coat of primer and two coats of paint

as directed in line and level. (N.S)

104 10.00 Supplying and fixing of 300 mm-L x 150 mm-B x 380 393 Rmt

mm-H Kerb block for Footpath in M-20 grade using

20 mm nominal size black trap aggregate of

Sevaliya/Timba or equivalent quality for pre-cast

blocks, reasonably exposed finish/ formwork , mould

with well equipped with vibratory system for kerb

stones of approved design including curing, etc.

complete, including the cost of formwork etc.

complete. The rate shall also

include necessary cutting of asphalt, fixing the Kerb

stones in line and level on 5 cm thick sand bedding

with necessary equipments and materials. The rate

shall also include the flush pointing in CM (1:3) for all

joints of the kerbstones. Filling of zari alone the sides

of the kerb stone fixed with Bituminous concrete

Bituminous concrete / C.C. mixed in proper position

to flush with the road surface as directed by Engineer

in change to form a portable mixture.

105 50.00 Providing and Laying of Rubber Moulded Paver Block 429 Smt

Grey/Coloured 60 mm thick, M-35 Grade of any size

shape (Usually Uni-Paver Blocks) using black trap

good quality aggragate of 20 mm nominal size for

footpath,parking areas, service lanes and other areas

as mentioned in the drawing / instruction of engineer

in charge. Cost includes formworks using rubber

mould, Rate providing and laying paver blocks as per

required grading and specification. The paver block

shall be mechanically compacted. The work of paving

blocks shall be executed in line and level by skill

mason of flooring work only. It should be laid in such

a way that the no cutting of the paver block to be

necessary. if cutting of paver block necessary then it

should be cut by machine only and carting. The

finished surface of the paver block shall have

resonably good, plain finished. Paver blocks shall be

compacted and shall be relaid if necessary. Gravel or

such type of materials shall not be allowed for

production. Laying on 5 cms thick sand

106 200.00 Labour work for fixing interlocking blocks / any kind 78 Smt

of pavement on up to 50 mm th sand bedding,

levelling, watering and fixing in line & level as well

cleaning the site etc.comp. as directed.

107 2.00 Provdg. & laying S.W. Gully trap with brick masonry 1279.4 No.

chamber & water tight G.T.Stone including fixing of

covervSquare mouth trap 100 mm x100 mm size P-

108 1.00 Providing and laying (to level or slopes) and jointing 211.05 Rmt.

with stiff mixture of Cement Mortar in proportion 1:1

Salt glazed stoneware pipes including testing of pipes

and joints complete.(A) 100mm dia.

109 10.00 Providing, supplying and fixing precast C.C. blocks (M- 219 Rmt.

20) edge kerb having size of 75 x 300 x 300 mm

depth and as per design conveying it to the site,

jointing into C:M 1:3 and racking out the joints incl.

necessary excavation of asphalt, soil etc..completed.

110 Providing and supplying of labour for necessary

manual excavation, cleaning, Shifting of Material Or

any other, or for any other work as directed by

Engineer In charge. The Rate includes Handcart with

A 12.00 Labour charges - Mazdoor (As per Amc circular No-4) 497.5 EACH

B 1.00 Labour charges - Supervision for Machinery 711 EACH

C 1.00 Fitter/Plumber/Mason 697 EACH

D 1.00 WELDER/ Gas cutter at Day /night 689 EACH

111 2.00 Up to 0.30 meter (By any type of Breaker Machine or 200 SMT

R.C.C.Cutter machine including cost of operator, fuel,

& transportation etc complete.

112 1.00 0.30 meter & above (By any type of Breaker Machine 350 SMT

or R.C.C.Cutter machine including cost of operator,

fuel, & transportation etc complete.

113 1.00 Supplying electric breaker machine for RCC slab or 1071.42 PER SHIFT

asphalt demolishing work on site by using operator,

fuel, power supply etc.complete as directed. (no

payment should be allowed for non working

condition of machinery and for pipe line excavation

and M.H. work. Allowed only for break down work)

(Based on Previously approved rate by CE sir )