BID DOCUMENTS OF ANNUAL RATE EMPANELMENT FOR BUILDING ACTIVITY IN WARD NO- 1 TO 13 IN PORBANDAR MUNICIPAL CORPORATION

Schedule No Name of Work

Schedule - B BID DOCUMENTS OF ANNUAL RATE EMPANELMENT FOR BUILDING ACTIVITY IN WARD NO- 1 TO

13 IN PORBANDAR MUNICIPAL CORPORATION

I/We am/are willing to carry out the work @ % Above / Below Percentage (should be writen in figures and

words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. Put to Tender Rs.

Add % Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Consultant City Engineer

CC Patel and Associates Pvt Ltd

Porbandar Municipal Corporation

Ahmedabad Porbandar

Municipal Commissioner

Porbandar Municipal Corporation

PORBANDAR MUNICIPAL CORPORATION - PORBANDAR

DIST: PORBANDAR

BID DOCUMENTS OF ANNUAL RATE EMPANELMENT FOR BUILDING ACTIVITY IN WARD NO- 1 TO 13 IN PORBANDAR

MUNICIPAL CORPORATION

ITEM NO DESCRIPTION UNIT

1.00 Basic Rate of Materials 1.00 As mentioned As -

in SOR mentione

2.00 Basic Rate Input of Labour 1.00 As mentioned As -

in SOR mentione

3.00 Basic Rate Input of Carriage 1.00 As mentioned As -

in SOR mentione

4.00 Basic Rate Input of Hire Charges 1.00 As mentioned As -

in SOR mentione

5.00 Basic Rate Input of Extra - item 1.00 As mentioned As -

in SOR mentione

6.00 Chapter No. 2 - Mortars 1.00 As mentioned As -

in SOR mentione

Chapter No. 4x - Earth work As mentioned As

7.00 (Executed with Mechanised 1.00 in SOR mentione -

Efforts/Machinaries) d in SOR

8.00 Chapter No. 4 - Earthwork (Executed with Manual 1.00 As mentioned As -

Labour) in SOR mentione

Chapter No. 5 - Concrete Work As mentioned As

9.00 1.00 in SOR mentione -

10.00 Chapter No. 6 - Brick work 1.00 As mentioned As -

in SOR mentione

Chapter No. 7 - Stone Masonary As mentioned As

11.00 1.00 in SOR mentione -

Chapter No. 9 - Form Work As mentioned As

12.00 1.00 in SOR mentione -

Chapter No. 10 - Wood Work & Joinery As mentioned As

13.00 1.00 in SOR mentione -

Chapter No. 11 - Steel, Aluminum & Iron Work As mentioned As

14.00 1.00 in SOR mentione -

Chapter No. 12 - Building Hardware As mentioned As

15.00 1.00 in SOR mentione -

Chapter No. 13 - Glazing As mentioned As

16.00 1.00 in SOR mentione -

Chapter No. 14 - Paving & Floor Finishes As mentioned As

17.00 1.00 in SOR mentione -

Chapter No. 15 - Roof Coverings As mentioned As

18.00 1.00 in SOR mentione -

Chapter No. 16 - Ceiling & Lining As mentioned As

19.00 1.00 in SOR mentione -

Chapter No. 17 - Plastering & Pointing As mentioned As

20.00 1.00 in SOR mentione -

Chapter No. 18 - White Washing, Color As mentioned As

21.00 Washing, Distempering & Other Finishing 1.00 in SOR mentione -

Chapter No. 19 - Painting & Polishing As mentioned As

22.00 1.00 in SOR mentione -

Chapter No. 20 - Demolition & Dismantling As mentioned As

23.00 1.00 in SOR mentione -

Chapter No. 21 - Repairs to Buildings As mentioned As

24.00 1.00 in SOR mentione -

Chapter No. 22 - Miscellaneous Building Items As mentioned As

25.00 1.00 in SOR mentione -

Chapter No. 23 - Water Supply, Plumbing & As mentioned As

26.00 Sanitary Fittings 1.00 in SOR mentione -

Chapter No. 24 - Drainage & Sewerage Item As mentioned As

27.00 1.00 in SOR mentione -

28.00 Fixing of wooden door window in masonry as per 1.00 No. 389.59 -

Repairs to flush door, cupboard shutters,

furniture by removing the damaged ply wood

sheet portion & replacing in with new 4 mm thick

ply wood including necessary s.s. fixtures and

fastings and other necessary accessories and

refixing it is at its original position making it

functional, good looking including necessary oil

paintings, french polishing etc.

30.00 Repairs to 6mm thick plywood partition by 1.00 Sqmt. 1047.53 -

repairing or replacing necessary plywood and non

teak cross battern etc. including oil painting and

making it good & functional (rate including all the

labour materials tools etc)

31.00 providing and fixing precast c.c. door frame in 1.00 Sqmt. 1844.50 -

masonry labour including

labour and materials

32.00 Repairs to steel frame by necessary straining of 1.00 Sqmt. 406.07 -

frame & welding or required

to make it functional & good looking

33.00 Repairs to steel shutters by necessary straining 1.00 Sqmt. 969.85 -

of frame & welding or

required to make it functional & good looking

34.00 servicing of rolling shutters including cleaning, 1.00 Sqmt. 1683.11 -

oiling, greasing and make it

functioned such away that it com. Easily closed or

providing and fixing rolling shutters of approved -

make maid of 80mm dia

M.S. latch as per the instruction with standard

pattern including pipe shaft, back of plate side,

channel locking arrangement inside & outside

flood cover, spring with two coat of oil painting

and a coat of primer (rate includes all labours,

materials, tools, plants, equipments, etc.)

Providing and fixing in position callapsible -

steel shutters with vertical channels 20*10*2

mm braced with flat iron diagonals 20*5 mm

size with top and bottom rails of T_rin

40*40*6 mm with 38mm dia, steel pulleys

complete with bolts, nuts, locking

arrangements, stoppers handles including

applying a priming coat of read lead paint. (

37.00 Providing & laying both side POLISHED KOTA 1.00 Sqmt. 923.95 -

STONE SHELVES to C.B. with making the

grooves in the walls and fixing the kota stone

finishing the same with cement mortar 1:2

Water proofing of leakage terrace by using -

necessary approved water proofing chemicals

38.00 including cleaning of terrace ( with all labour 1.00 Sqmt.

39.00 Repairs to manglore tiles shed including 1.00 Sqmt. 161.25 -

replacing broken tiles, damaged batten pati,

and necessary cement vata/lodhia as directed.

( excluding cost of cement & principal post

Repair to existing damaged door by -

providing and fixing 22 guage alluminium

foil sheet with help noils screews and making

it good and functional.

41.00 Cleaning of septic tank by and disposing of out 1.00 Cum. 507.29 -

side nagarpalika limit

disposing of sludge as directed, etc.

42.00 Providing and fixing precast R.C.C Manhole 1.00 No. 1209.10 -

cover of size 60*45 cm,

cm thick with necessary handles

43.00 Cleaning of over head tank, like RCC tank, 1.00 Cum. 376.64 -

masnory tank, steel tank

and sintex tank asbestos cement tank.

Cleaning of open compound jungle cutting -

vegetation, grass shrubs plants, etc

44.00 including disposing of the waste and 1.00 Sqmt.

stacking the useful

Collecting the waste spread on the -

open ground/compound by sweeping and

disposing of the same by contractor own

Providing and fixing PVC 6 cover and frame of -

Providing and fixing corrugated -

semitransparent FRP sheeet 1.50mm roofing

fixed with GI 'J' or 'L' hooks belt and nets

8mm dia with bitumen washing filled with

white lead complete excluding cost of

purlins, rafters and trusses.

50.00 Providing and fixing PVC carpet 1.30mm 1.00 Sqmt. 921.59 -

thick synthetic of proved brand and

manufacture requried shade as specified

including using suitable rubber adhesiv

solution of approved quailty including cost of

material and labours

51.00 Providing and fixing standard quilty 1.00 No. 1399.45 -

hydrulic door closer ( rate

including all labour and material cost)

Providing standard quality magnetic door -

52.00 catcher as approved by the engineer in 1.00 No.

charge. ( rate including all labour & material)

Providing and fixing standard quailty mortice -

53.00 lock as approved by the Engineer in charge. ( 1.00 No.

rate including all labour & material)

Providing and fixing 35mm thick,Fully -

panelled shutters for door, window in

indian teak wood on exiting frame with

S.S. butt, hinges fixing with screws

including all necessary fixtures of S.S. as

per instruction with two coat of enamel paint

a coat of primer making it

good.(SS Fitting)

Providing and fixing 35mm thick partly -

panelled partly glazed shutters for

door,window in indian teak wood on

exisitng frame with S.S. butt,hinges fixing

with screws including all necessary fixtures of

S.S as per instruction with two coat of enamel

paint a coat of primer making it good (S.S.

Providing and Fixing 35mm thick, fully -

glazed shutters for door, window in indian

teak wood on existing frame with I.S.S

Butt,Hinges fixing with screws including

all neccssary fixtures of S.S as per

instruction with coat of enamel paint a coat of

primer making it good.

(S.S. fittings)

Labour work for providing wooden frame -

from exiting dismentalled wooden material

like rafters, purlins, king past any type of

57.00 wood including a wing , finishing and making 1.00 Sqmt.

good of requried size for door and window

frame including applying one coat of priming

Providing wooden shutter for door & -

window frame exiting wooden material like

rafters, purlins, king past any type of

58.00 wood including a wing , finishing and making 1.00 Sqmt.

good of requried size for door and window

frame including applying one coat of primimg

Providing and fixing M.S iron ornamented -

gate of requried pattern with M.S. angle

section with M.S squre bars, fluts including

providing and fixing hold fasts, hinges roovas

including one coat of primer and two coats of

oil painting etc. comp

60.00 Provoding & fixing PVC mosqitoes proof 1.00 Sqmt. 477.11 -

net of approved brand

including Providing necessary well crose by

61.00 Repairs to collepsible gates by removing 1.00 Sqmt. 1014.57 -

from walls repairs and refixing after

requirs including cutting of damged channels,

roller etc. & replacing new channels and

rollers and also including two coats of

oil paint making it good.

62.00 Repairs to doors and windows shutters 1.00 Sqmt. 489.63 -

incl.required of broken components of teak

wood and providing missing components of

teak wood including providing necesssary

missing S.S fixtures and painting

to match with existing colour etc. comp

63.00 Providing and Fixing Three Track Anodized 1.00 Sqmt. 3190.85 -

Aluminium Section 1.5 mm thick three track

framework 92*31.75*[email protected] kg/rmt size

and 40*18 thick shutter frame with 5mm

mirror effect glass

64.00 Providing and Fixing gate using G.I 1.00 Kg. 170.67 -

rectangular pipe and G.I sheet as per

direction and drawing with necessary iron

haldraf, iron hinges, with packing

arrangement including one coat of red road

coat of oil painting etc. complete

Providing and fixing flush door shutter -

soild core construction with frame of first

class hardwood with cross board and face

veneer or plywood face panel sand

laminated both side 1 mm sunmica site as

per direction including SS butt, hinges with

necessary screw and all

fittings of SS etc. completed

66.00 Providing and fixing PVC roof shade 1.00 Sqmt. 1767.85 -

@1.5mm thick for generator including

necessary vertical G.I Squre / rectangular pipe

framing with necessary vertical GI squre pipe

as per as directed including one coat

of oil painting etc. completed

Providing and Laying Granite stone slab 18 -

to 20mm (AVG) thick for jam seal as per

design including full molded round front edge

in trade of steps laid on 20mm thick

cement mortar 1:6 (1-cement:6-coarse

sand) jointed with grey cement slurry

including rubbing and polishing

Providing and fixing all size of parking -

8mm vetrified tiles base of cement mortar

1:6 ( 1: cement-6: coarse sand) on any surface

as fixing on exisitng flooring by adhesive

material and jointed with colour cement

slurry and finished with flush painting,clearing

the surface etc.

Repair to exisitng damaged alluminium -

window by providing and fixing

damaged part like lock, pully, shetter,

glass, screw, frame etc work completed

Providing and fixing 35mm thick shutters for -

door, window and clear story windows

70.00 including anodised alluminium butt 1.00 Sqmt.

hinges with necessary screws (A) indian Non

teak wood (i) fully panelled.

71.00 Providing and fixing 35 mm thick shutters 1.00 Sqmt. 2953.96 -

with frame 10 x 7 cm for door, window

and clear story window including anodised

alluminium butt hinges with necessary

screws (A) Indian Non teak wood (i) fully

72.00 tractor on hire per trip charges with trailor 1.00 Trip. 1412.40 -

diesel, driver necessary

equipment within 5 Km are

Providing and fixing colour (G-4) -

Anodized Alluminium section partition with

door shutter 63.50*38.10*1.2mm with Glass

5mm thick and acralic sheet 4mm thick

door frame 75*25mm ( Door vertical

+door top+door middle+door,closer,

locking arrangment things handle etc

complete as per EIC

Providing and fixing tuffon glass door of -

12mm thick ( frosting) with locking , handle,

74.00 auto matic door closer, floor spring etc 1.00 Sqmt.

75.00 Providing and fixing table top 12 to 15 1.00 Sqmt. 9555.10 -

mm thick with having top smooth surface

& bottom rough surface (china white

colour) complete with all side fully molding

etc complete as per EIC.

Providing and laying 1.5 mm thick PVC carpet -

flooring with all taxes &

76.00 duties packing forwarding loading, 1.00 Sqmt.

unloading , installation etc. complete as

Providing and Fixing Zebra white curtain with -

fabric material and with roller mechanism

including vertical movement by using

thread mechanic colour as per selection

and rate including the cost of material and

fitting at site as per direction of EIC

Providing and fixing MDF wooden flooring -

with using 2mm foam and

78.00 0.5 mm PVC in floor with 8 mm thick 1.00 Sqmt.

approved make and shade wooden

flooring, including "T" profile and

reducer door profiles approved as per the

instruction of engineer in charge etc.

complete or as directed.

Providing, fixing, installation and -

commissioning at all height false ceiling of

12 mm thick BWP grade plywood IS

including providing and fixing of entire frame

work made of special teakwood having size

mm x 38 mm and consisting of angle cleats of

size 25mm x 20 mm at 600 mm / centre to

centre on fixed to the ceiling with dash fastner

12.5mm dia x 40mm long with 6 mm dia. bolts

to the angle hungers of 25 x 25x 5 mm of

required length, an other end of angle hanger

being fixed with nuts and bolts to

channels 45 mm x 15mm x 0.9mm running

at the @ of 1200mm centre to which the

every junction including hanging with roof,

with 25mm long drive- all screws @

230mm interval including joining and fixing

to a flush finish. The wooden ceiling will

be finished with the approved make

mm thickness teak veener finished with two

coats of sealer and two coats of melamine

spray polish as per directions and also

including the cost of making openings for light

fittings , grills , diffusers , cut outs made with

for AC frame of suitably fixed finishing of

all joints neatly to proper line and levels

including providing of additional frame work

for electricals fixtures including giving trap

doors where ever required. Diffusers,

cutouts for fire smoke dectactor etc. as per

the specification approved by architects

including necessary scaffolding supports,

suspenders etc. The quoting price should

be inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading,

installaion. As per choice of users

department and Concern officers in charge

as directed by the Engineer.

Providing & Fixing 95 MM thickness -

decorative door with min. 95 mm (+or-2mm)

thk. The entire structure should be made

with 63mm × 38mm × 1.45mm thick

aluminum section framework 450 mm ×

450mm C or C both vertically and horizontally

along with 50 mm glass wool. Having both

side 12mm thick ply. with 50 mm glass

wool. Having both side 12mm thick ply with

both side 4.0mm thk veneer of approved

shade with wooden frame as per design and

detail drawing. The edge to be lipped on

all sides with 12mm thick teak wood

beading. Both side exposed veneer and wood

surfaces to be finished with minimum

coats of monocoat polish and other side

PU finish. rate shall include necessary

locking system, floor spring, teakwood

handle, and other miscellaneous hardware.

complete as per detail drawing and

instruction of Architect/ engineer in charge.

(veneer basic rate 1200 per sqm)

Providing & Fixing wall paneling based on -

aluminum grid framing (50 mmx25 mm of

gauge) of grid size 600 mm x600 mm by

aluminum sections of said size. Grid frame is

covered with 18 mm thick marine plywood

and top surface covering by 4 mm thick

veneer finished with PU polish. Wall

paneling have suggested deep C" groove

and suggested deep nieces. All grooves are

finished with 4 mm thick veneer and PU

matt polish. Basic rate of veneer is

81.00 per sq mt. All exposed surfaces covered 1.00 Sqmt.

with 4 mm thick veneer of approved shade

complete with PU polish as

instructed by Architect/consultant/Engineer

In charge. Complete with all hardwares like s

nails, ss screws, adhesives etc. shown in

detail drawings. Contractor has to

provide suggested openings in paneling,

all necessary cut outs for Electrical works

& no extra payment shall be made for it.

Amount shall be paid only for the Partition

between the False Ceiling & Flooring.

Providing and fixing Wooden blinds with -

aluminum section head rail having width of

31.5 mm and height of approx

0.087gsm/r.ft with control unit operating

82.00 with endless chain and selected fabric is 1.00 Sqmt.

fixed on front side of selection with

velcrow and fixing slightly lower than the

previous one to minimum the shade is raised

and stack depth is approx 280 mm.

Providing & Fixing wall paneling based on -

aluminum grid framing (50 mm×25 mm of

gauge) of grid size 600 mm ×600 mm by

aluminum sections of said size. Grid frame is

covered with 18 mm thick marine plywood

and top surface covering by 4 mm thick

veneer finished with PU polish. Wall

paneling have suggested deep "C"

groove and suggested deep nieces. All

grooves are finished with 4 mm thick

veneer and PU matt polish. Basic rate of

veneer is 1183.60 per sq mt. All exposed

surfaces covered with 4 mm thick veneer

of approved shade complete with

PU polish as instructed by

Architect/consultant/Engineer In charge.

Complete with all hardwares like s nails, ss

screws, adhesives etc. shown in detail

drawings. Contractor has to provide

suggested openings in paneling, all

necessary cut outs for Electrical works &

no extra payment shall be made for it.

Amount shall be paid only for the Partition

between the False Ceiling & Flooring.

Providing and Fixing Anodised alluminium -

frame ( jindal door section NO 195 52 Weight

not less than 1.1 Kg.rmt) including wooden

insert for durable grip for door hinges size

fixed by SS hinges with single shutter of

factory made & stamped IS 12823 Grade

one ,type one 35mm thick solid core,

melamine faced, three layered resin,

flushed door having decorative lamination on

both side & U type 2mm thick 35mm*35mm

specially shaped molded colored anodized

aluminium beading fixed around the door

with fixture and labour as aproved and

directed by EIC etc complete

Providing and fixing Colour Anodized -

alluminium section lovered ventilator with

frame size 127.00*38.10*1.35 mm of any

approved brand in 5mm thick ground glass

and colour anodised alliminium lovers

fixtures holdface etc completed As directed

and approved by

EIC etc complete

Providing and fixing standard partition -

section of alluminium section of size

63.50*38.10*1.95 mm ( of jindal section no

4605 or equivalent

86.00 , @ wt 1.094 kg/Rmt with colour anodized 1.00 Sqmt.

alluminium frame with 5mm thick

transparent glass at top and 5mm bakelite

sheet at bottom with fixture and labour as

approved and directed by EIC etc complete

Providing and fixing flush door shutter of -

25mm thick solid core construction with

laminated both side, including anodised

87.00 alluminium butt hinges, handle morties 1.00 Sqmt.

lock, SS aldrop, SS stopped and with

necessary fixture as directed and approved by

EIC etc complete.

88.00 Repairs to door and window shutters 1.00 Sqmt. 365.00 -

including requried of broken components of

teak wood including providing necessary

missing SS fixture and painting to match with

existing colour etc complete

Providing and fixing G.I tube of size 15*15 mm -

89.00 with cutting , welding, hoisting with necessary 1.00 Rmt.

support and fixing etc complete as per EIC

90.00 Providing and fixign Gate using M.S pipe as 1.00 Kg. 127.22 -

per direction and drawing with necessary

iron haldraf iron hinges with packing

arrangement including one coat of red road

iren and two coat of oil painting etc

Water proofing of leakage terrace by using -

necessary approved water proofing chemical (

Approved brand and directed by EIC) in

91.00 horizontal as well as vertical surface in two 1.00 Sqmt.

coats and repair exexting crack and incluiding

cleaning the exesting surface free from dust,

debris, weeds and other material.

Providing and fixing Alluminium section 1.5 -

mm thick Window shutter with 40*18 mm

92.00 thick shutters with Mosquito Proof SS jali 1.00 Sqmt.

with complete accessories ribbin etc

93.00 Removing the existing plaster i.e. in Lime or 1.00 Sqmt. 47.00 -

cement of any thicknesss including raking out

joints upto 20mm without causing dust

nuisance and disposal of unserviceable

materials with all lead and lift.

Removing & Refixing of Existing Door -

Shutters And Damaged Frame with

necessary Hold Fasts including making good

the damaged wood work or providing Indian

teak wood of extermely damaged frame and

94.00 shutters including two coats of oil paint to 1.00 Sqmt.

exposed surface of frame and shutter with

Wood primer coat and Necessary New S.S.

fixures and fastners etc. complete As per

Detailed Specifications And As Directed by

Removing & Refixing of Existing Window -

Shutters And Damaged Frame With

Necessary Hold Fasts including making good

the damaged wood work or providing

Indian teak wood of extermely damaged

frame and shutters including Two coats of oil

paint to exposed surface of frame and shutter

with One Coat Of Wood primer And

S.S. Fixures andFfastners etc. Complete As Per

Detailed Specifications And As Directed By

Providing and fixing 19mm thick water -

proof plywood shutters with both side 1 mm

thick formica for kitchen/cupboard cabinet

including using approved formica on shutter

and teakwood decorative batten patti in

front portion with necessary fixtures and

fastening including polishing work etc.

complete and direction of engineer in

chare. (A) for kitchen cabinet

(b) for cup board cabinet

Providing and fixing flush Lead door shuter -

solid core construction with enamel painted

frame of first class hard wood (125mm x

mm) with face veneer or plywood face panel

including nickel plated bright finished M.S.

Piano hinges with necessary screws and

230mm S.S.handle, S.S. door stopper,

S.S.latches, S.S. Haldraf and S.S. Tadi.Lead

sheet of 1.85 mm thick ( unit weight of

23 kg/sqmt) shall cover on entire lenght and

breadth of the door and it shall be covered

with 6mm ply wood. Both side of the door

shall be covered with 2mm thick laminated

sheet approved by engineer in charge. Size

2.1 mt=2.52 sqmt

Providing, fixing and construction of sandwich -

type 18 mm thick One Side polished

Granite Stone of uniform size and

colour for kitchen/pantry/countr/

laboratory, sink shelves etc. in floor, dedo

or facia upto 100 mm wide including

necessary cement mortar bedding in cement

98.00 mortar 1:2 of required thickness. Granite 1.00 Sqmt.

Stone shall be fixed over 25 mm thick

Polished Kota bottom, cement joints and

pointing as specified with necessary making of

edges, polishing curing daily mopping with

water and kerosene as directed for atleast

days or upto the satisfaction of engineer-in-

99.00 Providing and fixing 25 mm thick both side 1.00 Sqmt. 1792.00 -

polish kota stone shelves below platform, in

store or in curpboards including fixing in

position front edge machine cut polishing etc.

Providing & fixing Homogneous Vinyl -

flooring 2.00 MM thick and polyurthane

reinforced with wight loss than

2.80kg/Sqmt with good chmical rsistant and

that which do not fauren fungi and

bacterialgouth with thicknes loss of les than

100.00 0.15mm and volume loss than 4.00mm cube 1.00 Sqmt.

and i roll from jointed by heat seam welding

and with 25mm pvc covering at junction and

making colour coping at the end to seal the

joint of tarkett optima spica or equivelent

make etc comptlete as per the design and

shade approved by the engineer in charge.

Finishing wall with Acrylic emulsion paint -

(Apex ultima or equivalent only) on exterior

wall surface (two Coats) to give an even shade

of an approved brand and manufacture and

101.00 even shape after thoroughly brushing the 1.00 Sqmt.

surface to remove all dirt, and remains

of loose powdered materials at any floor,

any level and any height. ( First

Wall painting (two coats) with plastic -

emulsion paint of approved brand and

manufacture on undecorated wall surface to

102.00 give an even shade including throughly 1.00 Sqmt.

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

Providing and fixing in position UPVC Cowel -

went to pipe (1) 75mm

103.01 Providing and fixing in position UPVC 1.00 Each 505.17 -

Cowel went to pipe (1) 110 mm

Providing and fixing cast iron (Spun) Nahni -

trap of the following nominal diameter of

self cleaning design with C.I. screaed down

or higned grating including cost of cutting and

making good the walls and floor 100mm inlet

and 50mm outlet.(C) 100mm dia.

105.00 Providing and fixing Kitchen sink with C.I. 1.00 Each 2326.66 -

or M.S. brackets, painted white including

cutting holes in walls and making good the

same but excluding fittings. (C) Vitreous

China Sink.(i) 600mm x 450mm x

Providing and fixing brass chromium plated -

106.00 surgical handle cock of approved size 15 mm 1.00 Each

dia etc complete.

Providing & fixing in position Colour -

Powder Coated alluminium Partition with

alluminium hollow section frame of

approved shade fabricated from alluminium

standard section for outer frame size

mm x 44.5 mm (of app. wt. 1.30 kg/Rmt.) and

styles and top rial of alluminium section

size 47.5mm x 44.5 mm (of app. wt.

107.00 kg/Rmt.) bottom rail & lock rail for Door 1.00 Sqmt.

size 114mm x 44.5mm (of app. wt.

1.7kg/Rmt.) and providing rubber gasket all

over including 19 mm thick particle board

sheet both side 1.5mm laminated sheet of

approved make fixed clits including all

required materials labours and equipments

as per detailed drawing as directed by

Engineer-In-Charge.

Providing & fixing in positionPowder Coated -

alluminium Single Shutter door with

alluminium hollow section frame of

approved shade fabricated from alluminium

standard section for outer frame size

mm x 44.5 mm (of app. wt. 1.30 kg/Rmt.) and

door styles and top rial of alluminium section

size 47.5mm x 44.5 mm (of app. wt.

kg/Rmt.) bottom rail & lock rail for door

size 114mm x 44.5mm (of app. wt.

1.7kg/Rmt.) and providing rubber gasket

and glazing clips around the glass all

over including providing heavy handle,

heavy lock, bracket,Door closer, stoppers.

mm thick sheet ground glass (frosted or

obscured on one side in Top panel) fixed with

transparent silicon gasket & 19 mm thick

particle board sheet both side 1.5mm

laminated sheet of approved make fixed

clits including all required materials labours

and equipments as per detailed drawing

Providing and fixing (600 x 450 x 200 -

mm) size viterous china laboratory sink

with CI or MS brackets painted white

including cutting holes in walls and making

good the same including providing and fixing

40mm dia C.P. brass waste couplin rails

providing fixing PVC waste

pipe etc. complete.

Providing and fixing aluminium die cast -

body tubular type universal hydraulic door

closer (having brand logo with ISI, IS :

110.00 embossed on the body, door weight upto 35 1.00 Each

kg and door width upto 700 mm), with

necessary accessories and screws etc.

Providing and fixng 90 C.M. high MS railing -

with 40 mm medium grade

G.I. pipe for balconies, terrace parpets,

ramp, stairs etc. with 25 x 25mm square

111.00 Pipes Balusters @ spacing 10 cm c/c as 1.00 Rmt.

per approved pattern including cutting,

bending, welding, fixing and applying three

coats of approved brand of primer and

two coat of paint etc. complete

Providing PVC Plain Semi Transparent 2mm -

Sheet Roofing Fixed with

112.00 G.I. Plain & Bitumen washer complete 1.00 Sqmt.

excluding the cost of Purlins, rafter &

Old & Unserviceable material ALL TYPE OF -

CEILLING FANS/EX. FAN WITH WIRING

113.00 POINTS. with removing charges. The 1.00 Each

dismantling material will be the property of

Old & Unserviceble material ALL TYPE OF -

TUBELIGHT FITTINGS WITH WIRING POINTS.

114.00 with removing charges.The dismenteling 1.00 Each

be the property of contractor.

115.00 Old & Unserviceble material ALL TYPE 1.00 Each 2195.24 -

OF WINDOW TYPE AIR CONDITIONER

UNIT WITH WIRING POINTS. with

charges.The dismenteling material will be the

property of contractor.

Providing and fixing wash down water closet -

(European type WC pan) with jet with

integral 'P' or 'S' trape with soil pipe in

cement mortar 1:1 (1 cement : 1 fine

sand) with CP brass hinges and ruber

buffers including cutting holes in wall

and making good the same etc

complete.Providing and fixing plastic seat

116.00 and cover for wash down water closet with 1.00 Each

C.P. brass hinges and rubbers buffers,

Including concealed body for Flush Valve

consisting of concealaead body and cartidge

with operating system as per Ebgineer

Incarge. Providing & fixing of Jet Spray/hand

shower with all accessories to complete the

item in it's respected manners as per directed

by engineer in charge.

Providing and fixing S.S. railing using S.S. 304 -

tubes having dia. 50 mm for handrail,

mm dia posts placed that 600 mm centre

to centre fixed in wall as per the detailed

drawing including erecting in position grouting

/ fixing etc. complete

Supplying and fixing stainless steel hand -

Railing of Grade 304 with glossy finish

consisting of 38 NB or nearest size vertical

posts 900 Heigh at maximum spacing

900c/c with suitable cups at bottom and top

rail of 50 NB or nearest size &

intermediate rails of 20 NB or nearest size

etc complete at all levels including bending

to required profile. Tungsten insert gas

welding & all required accessories,

grinding & labour etc complete as per

design fixing with base slab/concrete or

side wall/RCC by suitable fastenre and plates

as per instruction of Engineer-in-Charge.

119.00 Providing & Laying PU Tactile with 3 m Self 1.00 Sqmt. 4848.00 -

Adhesive (300 x 300 mm)

with 4 mouleded Washers.

120.00 Providing and Fixing 10" X 4" Name Plate with 1.00 Piece 480.00 -

Acrylic 5M Material and braile lippi ( minimum

8 Letters ) and Fixing with Double sided

bonding tape (3M) and screwed as per

direction in charge.

121.00 Providing&fixingStainlesssteel316GrabBar40m 1.00 No. 1122.11 -

mdia.75Cmlongrail.asdi

rected and approved by engineer incharge.

Note: - If additional work is required, payment for that item will be made as R&B

GWSSB,GMB,NHAI & other Government SOR or Approved Rate Analysis From Porbandar

Municipal Corporation