Repairs to E.I. & Street Light Fittings, LED Tubelight At ITI Rajpur , Dist.: Patan.

1 Providing and erecting following type 1 Nos 180.79 Rupees

of Modular Type Accessories One

mounted with PVC / Hundred

metallic/Wooden box, single Eighty And

mounting base frame covered with Paise

textured / metallic/white front plate , Seventy

modules erected with necessary Nine Only

connections as per site situation

directed by Engineer In charge. (9)

16 Amp. SP one way switch

(10) 6/16Amp. Universal socket 1 Nos 199.98 Rupees

Cat.III One

Eight Only

2 providing and erecting Mains with 10 Mtr. 112.11 Rupees

1.1 KV grade FRLS PVC insulated One

ISI marked stranded Copper Hundred

conductor wire in following type of Twelve

pipe to be erected in / on wall / And Paise

ceiling with 2.5 sq. mm copper Eleven

conductor FRLS PVC insulated Only

stranded wire of green colour for

earth continuity of following size

(A) with medium class Rigid PVC

pipe and accessories (a) 2 wire

(h) 4 wire 6 sq. mm 75 Mtr. 260.58 Rupees

Paise Fifty

Eight Only

3 providing and erecting Mains with ISI 10 Mtr. 142.41 Rupees

marked, 1.5KV grade electrolyte One

multi stranded, annealed copper Hundred

conductor with heat resistant PVC Forty Two

insulated conforms to IS 694, IEC - And Paise

227 erected in existing pipe of Forty One

following size (Specifically for control Only

panel, relays, power switchgears,

motor starters & control wiring) with

required size of copper lugs, nuts

and bolts if required. (g) One wire

4 Replacing Old & U/S by New 140 Mtr. 46.46 Rupees

Supplying and erecting Flexible PVC Forty Six

insulated multi strand multi core 1.1 And Paise

kv grade ISI marked copper wires of Forty Six

following size to be erected as Only

directed. (e) 1.50 Sq.mm 3 core

round PVC sheathed

5 Replacing Old & U/S by New 10 nos 373.70 Rupees

Supplying and erecting LED indoor Three

fittings with LEDs of wattage 0.2 Hundred

Watt to 0.5 Watt assembled on Seventy

single MCPCB, with housing used Three And

as a heat sink shall be made of thick Paise

sheet Steel conforming to IS: Seventy

513/CRCA/ aluminium die cast Only

powder coated and high U.V. &

corrosion resistance with diffuser

with company mark/name 160V to

270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

wattage capacity between the

ranges shown.) (A) Tube

Light with integral driver (iv) 22-24

Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-III

6 Replacing Old & U/S by New 11 Nos 589.84 Rupees

Supplying and erecting LED indoor Five

fittings with LEDs of wattage 0.2 Hundred

Watt to 0.5 Watt assembled on Eighty

single MCPCB, with housing used Nine And

as a heat sink shall be made of thick Paise

sheet Steel conforming to IS: Eighty

513/CRCA/aluminium pressure die Four Only

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more

than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

wattage capacity between the

ranges shown.)

(A) Square/ Circular shaped

Surface/Recessed Mount Downlight

with provision for spring loaded

mounting clips complete.IP20 (iii) 16-

20 watts, Surge-2 KV Cat.III

(iv) 22-24 watts, Surge-2 KV Cat.III 1 Nos 758.51 Rupees

Fifty Eight

7 Replacing Old & U/S by New

Supplying and erecting LED street

light / Flood light fittings with High

power White LEDs wattage of 3 Watt

and above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminum housing

with smooth finish powder coated

and heat sink extruded aluminium

with diffuser and Polycarbonate

optics/ lenses, with toughened glass

with company mark/name engraved

or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

wattage capacity between the

ranges shown.)

(A) Street Light (IP-65), Surge 30 Nos 3345.12 Rupees

protection -4KV integral and ,Light Three

must have 440VAC line supply with Thousand

over-voltage protection.(i) 48 watts Three

Cat.III Hundred

Forty Five

(B) Flood Light (IP-65), Surge 12 Nos 7266.95 Rupees

protection -4KV integral and ,Light Seven

must have 440VAC line supply with Thousand

over-voltage protection. (iv) above Two

90 to 120 watts Cat.III Hundred

Ninety Five

8 Replacing Old & U/S ICTP by new 8 Nos 6173.12 Rupees

Providing and erecting Approved Six

make Four pole moulded case circuit Thousand

breaker having breaking capacity One

ICU of 25 KA. at 415 V,having Hundred

normal current rating up to 25 A to Seventy

100A. with Fixed thermal & magnetic Three And

release suitable to work on A.C. Paise

supply 50 c/s. with all internal Twelve

connections, spreader tinned copper Only

& complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

9 Replacing old & U/S ICTP by new 1 Nos 16221.61 Rupees

Providing and erecting Approved Sixteen

make Four pole moulded case Thousand

circuit breaker having breaking Two

capacity ICU of 35 KA. at 415 V. Hundred

having Normal current rating Twenty

200A.with variable Thermal & One And

magnetic release suitable to work on Paise Sixty

A.C.supply 50 c/s. with all internal One Only

connections, spreader tinned copper

& complete erected in existing

G.M.S.housing ICS=100% of

ICU only Cat III

10 Replacing old Busbar by new 1.2 Rn.Mtr 3202.71 Rupees

Supplying and erecting triple pole & Three

neutral 440V / 500V panel mounting Thousand

Copper Busbars with four equal Nos. Two

of electrolyte bus having current Hundred

density not more than 1.6 Amp. / Two And

sq.mm (Rated current / cross section Paise

area) duly wrapped with colour Seventy

insulating tape for phase sequence One Only

of following current carrying

capacity, erected with necessary bus

bar supports /insulators, main cable

socket to each bar, erected in

existing cubical panel with necessary

connections. (B) Suitable for

Amp. capacity

11 Replacing Old & U/S by New 15 Nos 112.11 Rupees

providing and erecting Miniature One

circuit breaker single pole 6A to 25A Hundred

suitable to operate on 240 V A.C. Twelve

system and having breaking capacity And Paise

10 KA to be erected in existing box. Eleven

confirming to IS 8828/1996 with ISI Only

Mark Cat. III

12 Plastic enclosure fitted with DIN rail 5 Nos 52.52 Rupees

suitable for incorporating One / Two Fifty Two

nos. MCB And Paise

13 Sheets steel powder coated 1 Nos 176.75 Rupees

enclosure suitable for incorporating One

One/Two nos. MCB. Hundred

14 Providing & erecting 415 V MCB 1 Nos 737.30 Rupees

Four Pole for Motor & Inductive Seven

Load (C Curve) having 10KA Hundred

breaking capacity & confirms to IS Thirty

:8828 in existing box having Seven And

following capacity (c)63 Amp. Paise

( with Enclouser) Thirty Only

15 Providing & erecting weather proof,

dust & vermin proof, floor mounted

front operated indoor type cubical

panel board necessary IP-42 and

above protection as per approval

from engineer incharge made from

14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions

with necessary accesories

supporting angles/ flats channel

including cutting, bending, drilling,

welding, riveting with internal

partitions & cable alley as per

requirements & instruction of

engineer-in-charge with erection of

supplied switch gears, BUSBARS,

suitable size of inter connecting PVC

copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring

instruments, earth bus & earth bolts,

foundation flange - bolts-base

Plates, sufficient nos. of hinged

doors, handles with locking

arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice

board,necessary ventilation,earthing

strip complete.

The Panel shall be painted with

epoxy powder coating. (The rates

excludes the cost of switchgears,

bus bars, inter connecting mains &

Copper Aluminium strips, meters,

Fuses etc. The dimension shall be

measured excluding base beams)

The panel shall be supplied with

following approved manufacturers

with following size.

(A) locally fabricated panel board(i) 1.5 Sq.mm 10468.65 Rupees

with 350 mm depth Ten

Sixty Eight

Sixty Five

16 Supplying & erecting earth pit of

minimum bore dia.150mm size

approved make Earthing Electrode

consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm

having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection

terminal dia of 12mm with constant

ohmic value surrounded by highly

conductive compound with high

charge dissipation suitable for

following type of applications with

chamber and heavy duty cover.

(A)(approved make OEM has to

submit test certificate including value

of earth resistance of installation

duly stamped and signed by agency

and officer Incharge has to ensure

the value of earthing resistane

mentioned in test Certificate) &

having back filling compound of (B)

Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound

should be capable to retain moisture

for long time Necessary test report

must be submitted by Agency.

(a) For Electrical Installation up to 1 4591.46 Rupees

440V in normal soil Four

Length of pipe - 1 Mtr Thousand

Back filling compound - 1 Nos Bag of Five

15 Kg. Hundred

Ninety One

17 Replacing Old & U/S by New 44 Kg. 77.77 Rupees

Providing , erecting , fabricating the Seventy

M.S. structure as per requirement on Seven And

site incorporating proper size of M.S. Paise

angles,square,round, flats, bars, Seventy

channels, sections complete with Seven Only

cutting, welding, grinding & finishing

duly painted with one coat of red

oxide with erection on site as per

direction of engineer in charge with

necessary grouting, cementing,

plastering & finishing complete.

18 Supplying and erecting approved

make Octagonal pole made from HR

sheet steel. The pole should be

made as per IS. and shall be coated

with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend

local wind speed with integral

Junction box consist of terminal plate

of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal

and arrangement for cable

termination to be erected With

Suitable foundation (Included) as per

details given by manufacturer

considering site requirement.

(D) 6 Mtr. Long 70 mm Top X 135 3 Nos 8192.11 Rupees

mm bottom dia, 3 mm thickness Eight

with 200mmX200mmX12mm base Thousand

plate, 4-M20 Bolts and 600mm long One

with necessary G.I. J Bolts .Approx Hundred

Pole weight 59 kg Ninety Two

19 Replacing Old U/S By new Supplying 30 Nos 476.72 Rupees

& erecting approved make SMC Four

press moulded composite FRP. Hundred

loop-in, loop-out approx. 2mm thick Seventy

box complete with Bakelite Six And

connector strip 5way(3P+N+E),DIN Paise

rail for mounting mob & hinged Seventy

doors as per requirement having Two Only

locking arrangements with mounting

clamp with nuts, bolts & washers

suitable for erection on pole with

cable clamps& earth bolt of following

size of box. (C)150mm x 125mm x

100mm [deep]

20 Supplying and erecting Street light 2 Nos 491.87 Rupees

pole bracket comprising main B Four

Class GI pipe of 4.2 cm/require Hundred

outside dia. complete with suitable B Ninety One

Class G.I. sleeve tubing of approx. And Paise

45cms.length and suitable for Eighty

76.5mm/80mm/require size of pole Seven Only

top having nuts and bolts for fixing

the brackets and having spread of

0.5 mtr. Length with 110 deg.with

vertical plane and suitable welded

stiffener reducer and nipple with

check nut complete painted with one

coat.of Red oxide / PU base primer

and two coats of Aluminium / PU

paint. paint with following nos of

arms. [A] Single Arm bracket 0.5 Mtr

21 Supplying & erecting power 1 Nos 2782.55 Rupees

contactor ,AC3 duty for time switch Two

complete erected as per direction Thousand

(D) 4 pole 440V 40 Amp. Cat III Seven

Eighty Two

Fifty Five

22 Supplying & erecting approved make 1 Nos 13350.18 Rupees

IP 55 grade Company fabricated Thirteen

Timer Panel of following capacity for Thousand

switch On-Off street lights on time Three

scheduling basis made from 16G Hundred

CRCA sheet duly epoxy power Fifty And

painted inside and outside with Paise

hinged doors and locking Eighteen

arrangement consisting of suitable Only

size of 4 Pole MCB and 4 pole

contactor (cat-III)with analog time

switch, auto manual switch of same

make and suitable input and output

Bakelite terminals and with door

earthing approved by Engineer in

charge. (B) 40 Amp

Total Rs.=

Credit Dismental Amount Rs.=

I / We am / are willing to carry out the work at ___________________________

above / below

percent ( should be written in figures

and words )

below / above the tendered rates mentioned above.

Amount of my / our tender works out as under :-

Estimated amount Estimated amount

put to be tender Rs. _____________ put to be tender Rs. _____________

Deduct ______% below Rs. _____________ Add ______% above Rs. _____________

Net Rs. ______________ Net Rs. ______________

In words :- In words :-

* Please strike out whichever is not applicable.

1. I / We hereby declare that I / We have visited the site and fully acquited myself / ourselves

with the local situtaion regarding materials, labour and other factors pertaining the work

before submeeting this tender.

2. I / We hereby declare that I / We have carefully studied conditions of contractors,

specifications and other the tender documents of this work and agree to work execute that

same accordingly.

3. Approval of Material used in the above work shoud be approved from the Deputy Executive Engineer

(Electrical) before the startting of the work. Incase of failure of to do this , All liability of the agency will be

4. Dismental amount Rs. 14238.50 Must be deducted from bill.

Sign. Of Contractor Dy.Executive Engineer,

Patan Electrical R&B Sub Division

Dismental Material List

SOR % D.M

SR . NO. ITEM DETAILS QTY Unit AMOUNT

RATE AGE RATE

1 1.50 Sq.mm 3 core80Cable Mtr. 42 9.00 3.78

2 Street light 36 Watt

7 ( LED ) Nos 4778.00 4 191.12

3 Street light 36 Watt

4 LED Flood Light

12 watt Nos 7025.00 4 281

5 T/L LED 10 Nos 344.00 4 13.76

6 Down Light 16 W 11 Nos 550.00 4 22

7 Down Light 22 W 1 Nos 717.00 4 28.68

8 SP MCB 15 Nos 98.00 4 15

9 Bus Bar 200 A 1.2 Mtr. 950.00 9 15

10 63 A ICTP 7 Nos 1958.00 4 20

11 100 A ICTP 1 Nos 3399.00 4 135.96

12 4x2.5 Sq. mm Mains(existing

13 200 A ICTP 1 Nos 7933.00 4 317.32

14 Steel Tabular Pole3 Nos 4234.00 10 423.4

15 SMC Press Box 30 Nos 429.00 5 21.45

Total=

Sign. Of Contractor

Dy. Executive Engineer,

Patan Electrical sub. Div.