REPAIRS TO ROOF TREATMENT FLOORING PLASTERING AND CERTAIN BR WORK IN OFFRS MD ACCN VIP BLDGS ADM OFFICES AND VIP GUEST ROOM UNDER THE AREA OF AGE BR I IN ARMY AREA JODHPUR (8916/E8)

Amount

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-Charge..

40mm thick plain cement concrete (1:2:4) type B1, (using 20mm graded crushed stone aggregate) as in floor including finishing cement concrete surface even and smooth without using extra cement ,complete all as specified and as directed.

PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring,path , foundation etc ,complete all as specified and as directed.

50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, without using extra cement ,complete all as specified and as directed.

Chequred cement concrete tile 25 cm x 25 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 ,complete all as specified and as directed.

Coloured chequerred tiles 300x300 x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 ,complete all as specified and as directed.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade ,complete all as specified and as directed.

Supply only fine sand for interlocking paver blocks.

Machine made precast cement concrete blocks (interlocking paves) of 60mm thick rubberised with 6mm top layers of ante abrasive material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2 ,complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the out of MOD land ,complete all as specified and as directed.

20mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) use as a levelling course,complete all as specified and as directed.

15mm thick screed bed or bedding layer in CM 1:4 floor finished even & rough to recievr tiling/floor finish ,complete all as specified and as directed.

Non skid ceramic colour joint free tiles 6 to 7 mm thick of size area exc 0.06Sqm but nexc 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified and as directed.

Non-skid coloured ceremic tiles joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6 ,complete all as specified and as directed.

Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match colours tiles,complete all as specified and as directed.

Glazed colour ceramic tiles of size 300x200x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles ,complete all as specified and as directed.

Vitrified Ceramic tiles any shed 10mm thick (Square / rectangular) polishbed , area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to match including 15 mm thick screed bed in cement mortar 1:4 ,complete all as specified and as directed.

All as per item No 17.above but vertical surfaces including 10 mm thick rendering in cement mortar 1:4 ,complete all as specified and as directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc ,complete all as specified and as directed.

Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth ,complete all as specified and as directed.

Supply & Fixing wire netting galvanised steel wire cloth 0.9 mm nominal dia and 12 mm mesh lathing and fixed to ceiling including all laps, cutting and waste fixed with nails on ceiling ,complete all as specified and as directed.

10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc,complete all as specified and as directed.

15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface ,complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 ,complete all as specified and as directed.

Two coat of oil bound distemper incl one coat of primer ,complete all as specified and as directed.

Three coats of white wash on newly plastered surface of ceiling including preparation of serfaces ,complete all as specified and as directed.

Two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation ,complete all as specified and as directed.

One coats of white wash on old surface of wall ,complete all as specified and as directed.

One coats of white wash on old serface of ceiling ,complete all as specified and as directed.

One coat of colour wash on old surfaces including preparation,complete all as specified and as directed.

Complete removal existing preparing old decorated plastered or un-plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water including complete.

Applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces ,complete all as specified and as directed.

Applying one coats of synthetic enamel paint on old painted serface wooden surfaces of any description over 10 cm width or girth including preparation of surfaces ,complete all as specified and as directed.

Applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

Applying one coats of synthetic enamel paint on old steel serface of any description over 10 cm width or girth including preparation of surfaces,complete all as specified and as directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as directed.

Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each without taking off shutter from the frame complete all as directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm each complete all as directed.

Mild steel work as in doors frames using MS angle iron complete all as directed.

Mild steel framed work as in brackets etc for coller stands , chajja etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc ,complete all as specified and as directed.

Supply and fabrication of Mild steel guard bars and welded to window frames,complete all as specified and as directed.

Fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as per drg no CEBZ/TD/12/2008 sht 1/3 to 3/3

35mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc ,complete all as specified and as directed.

35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated,complete all as specified and as directed.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,complete all as specified .

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

Solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube all as specified.

Taking down steel window/ventilator ,complete all as specified and as directed.

Steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, with cooler opening, dovetailed or welded all as specified.

Steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, with cooler opening, dovetailed or welded all as specified.

Steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified.

Steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified.

Steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for glazing dovetailed or welded all as specified.

Steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for gauze dovetailed or welded all as specified.

Repair to steel window including taking down, replacement of unserviceable hinging device box type , handles, making them in serviceable condition and re-fixing in same opening including making soffits and jambs in CM 1:4 complete all as directed of Engr in charge satesfacation.

Aluminium anodized,tower bolt 200 mm long complete all as specified and directed.

Aluminum anodised handle extruded section of size 150mm long complete all as specified and directed.

Aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

Butt hinges 100 mm long,extruded aluminium alloy with mild steel hinge pin anodised type C- 21 for PVC door complete all as specified and directed.

Mild steel butt hinges 100 mm size complete all as specified and directed.

Mild steel butt hinges 100 mm size including welding fixed to frame complete all as specified and directed.

100mm size single action door spring hinge complete all as specified and directed.

Repair 100mm size single action door spring hinge including welding fixed to framecomplete all as specified and directed.

Floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long complete all as specified and directed.

Hackilng out old broken glass (any thikness, size quality or description) from metel frame including punching or drilling cut old glazing pins & providing fixing new ones.

4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed.

3 mm thick plain glass ordinary quality & glazing complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm as in necessary weilding complete all as specified and directed.

PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast iron fixing including necessary form work all as specified.

Flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item complete all as specified and directed.

Shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms)

MS with PVC coated decorative 25mm curtain rod with fixing brackets etc as in repairs complete all as specified and directed.

Soap dish of PTMT fixed with screws complete all as specified and directed.

PTMT towel rail 450 mm long fiexd to wall with chromium plated brass screws and woodn cleats Min weight 170gms approved make complete all as spcified and directed.

MS chromium plated peg set of five fixing with wall complete all as specified and directed.

Stainless steel sink ,1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm complete all as specified & directed.

Vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc all as specified & directed.

Vitreous china wash down water closet European Type pedestal pattern with seat cover and jet spray complete incl fixing of flush pipe etc complete all as specified and directed.

Vitrous china wash basin as in repairs, white flat back size 550x400 mm including , waste pipe, MS brackets complete all as specified and directed.

15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

20 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20mm dia all as specified specified.

25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified.

15 mm dia angular stop cock with chromium plated long thread with flange complete.

15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type) all as specified .

Bib, cock 15mm dia, cast copper alloy with crutch or butterfly handle, screwed for iron pipe all as spcified as fixed .

Low level flusing cistern PVC 9-10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection complete all as specified and directed.

Taking down PVC low level flusing cistern from the wall and fixed the same opening after replace the flush bend complete all as specified and directed.

Dismantling water tanks of capacity exc 250 ltrs but.nexc 500 ltrs and removing to store all as specified.

Rotational moulded polythene water storage tanksTriple layer (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I of capacity 500 ltrs, white colour including tank lid cover complete with fixing arrangement ,complete all as specified and as directed.

20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ,complete all as specified and as directed.

20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ,complete all as specified and as directed.

50 mm thick PCC (1:2:4)Type B-1 using 20 mm graded stone aggregate for water tank plinth ,complete all as specified and as directed.

Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise ,complete all as specified and as directed.

Providing precast RCC using 20mm graded aggregate as in cover slab for man hloes set in CM 1:6 complete all as specified and drected.

TMT bars 6 to 8mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups also & all as specified.

5 cm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, dry bedded complete all as specified and directed.

18 to 20 mm thick granite(approved quality by user ) in WHB counter top etc laid in dry bedded in pinning to wall including cutting rubbing grinding and polishing to edges and rounding off granite polish slab for smooth finish complete.

Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flaps (when open) complete.

18 / 19 mm thick pre-laminated particle board exterior grade, pre-laminated one side with decorative choice of lamination and other side balancing white lamination as in cup board shutter fixed with screw teak wood beading all round / exposed faces complete.

32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.

40 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.

35 mm thick pre-cast cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:4 complete all as specified and as directed.

Precast concrete 1:2 :4 type B-1 using 20 mm graded stone aggregate as in RCC jali post setting in mortar 1:6 complete

Rotational moulded polythene water storage tanksTriple layer (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I of capacity 1000 ltrs, white colour including tank lid cover complete with fixing arrangement ,complete all as specified and as directed.

High quality looking mirror fancy type 5 mm thick with with round edge fixed to wall with chromium plated bolt area n exc 2.0 sqm complete all as specified and direction by Engr in charge nd as directed.

EWC complete dual flush with seat cover elegance etc complete Make Johnson Cat P6107PW or equivalent in Parryware.

WHB (White coloured ) counter top ofsize 525x390mm including waste pipe all complete as directed of make Johnson Cat P5512PW or equivalent

Chromium plated 100mm dia shower with swivel joint of make Johnson Cat Part No S0005C or equivalent in Marc.

15mm bore centre hole Basin mixture chromium plated all complete of make Johnson Cat Part No JAZZ-T3117C or equivalent in Marc.

Wall mixture chromium plated with bend pipe all complete of make Johnson Cat Part No JAZZ-T3121C or equivalent in Parryware.

Long nose pillar cock long threaded all complete as directed of make Johnson Cat Part No JAZZ-T3103C or equivalentin Jaquar/Marc.

Bib cock15mm bore chromium plated of make Johnson Cat Part No JAZZ-T-3105C or equivalent in Jaquar/Marc.

Framed work as in door or gates ornamental type of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to br prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering runing rails and guides) including forging item (tersule etc) and hanging also fastening and fixing complete all as specified and directed.Conforming to Fe 290.Gde E165.

Applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces ,complete all as specified and as directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering complete.Note:- Opening of existing wind tie where required for taking down of AC sheet is included in the rate quoted against this item.,complete all as specified and as directed.

2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with 'J' type bolts ,complete all as specified and as directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ,complete all as specified and as directed.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store 25 mm dia ,complete all as directed.

Ditto as per srl item No. 123 above but 20 mm dia

Ditto as per srl item No. 123 above but 15 mm dia.

Fixing only GI of water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified 25 mm dia,complete all as directed.

Ditto as per srl item No. 126 above but 20 mm dia

Ditto as per srl item No. 126 above but 15 mm dia.

Steel Water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified 25 mm dia,complete all as specified and as directed.

Ditto as per srl item No. 129 above but 20 mm dia

Ditto as per srl item No. 129 above but 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc ,complete all as specified and as directed.

Demolition of existing water proofing Treatment including PCC padding etc and cleaning roof surface etc preparing the surface to receive plaster /PCC by brushing with wire brush and fanning the surface to remove all loose dirt etc .,complete all as specified and as directed.

Plain cement concrete (1:2:4) type BO( using 12.5mm graded crushed stone aggregate) as over roof for making good depression/undulation to make the existing as filling in depression of roof slab for receiving treatment of roof ,complete all as specified and as directed.

PCC 1 : 2 : 4 type B0 using 12.5 mm graded stone aggregate as in roof kerb including weathering, slightly rounded or chamfered angles and throating, ,complete all as specified and as directed.

Roof treatment work in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm and grooves shall be filled with bitumen

Carrying out water proofing treatment for roofs in the following stages (a) Brushing neat cement slurry @ 3.00 kg/Sqm and 15mm thick plaster in cement motor 1:4 with water proofing compound complete. (b) Material and labour for water proofing treatment for roof slabs by applying bitumen primer @ 0.3 ltrs/sqm then the applying hot blown 85/25 @ 1.20 kg/sqm and laying 3mm thick APP water proofing memberane modified felt with polyster membrane Reinforcement having weight not less than 3.6 kg/sqm with overlap of 100 mm and end lap 150mm and finally applying bituminous aluminium based paint on top complete all as specified and as specified and directed. (Note: - WPC shall be measured and paid separately) ,complete all as specified and as directed.

Carrying out water proofing treatment for roofs vertical side of wall in the following stages (a) 15mm thick plaster in cement motor 1:4 with water proofing compound complete. (b) Material and labour for water proofing treatment for roof slabs by applying bitumen primer @ 0.3 ltrs/sqm then the applying hot blown 85/25 @ 1.20 kg/sqm and laying 3mm thick APP water proofing memberane modified felt with polister membrane Reinforcement having weight not less than 3 kg/sqm with overlap of 100 mm and end lap 150mm and finally applying aluminium based paint on top complete all as specified and as specified and directed. (Note WPC shall be measured and paid seperately)

Supply only Integral water proofing compund

Note for all above items:All items are for M&L /S&F and to be executed in "Repairs" only unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are requested to quote their rates accordingly.

mahalaxmi enterprises

Nikhat nirman

M/S KAUTILYA GARG

M/S JALAL KHAN

BEYLIM INFRA

ABHOG INFRASTRUCTURE PRIVATE LIMITED

Jai Doulat Construction Co