RATES REQUIRED BY ONLINE PORTAL FOR COLD STORAGE AND GRAIN SIEVEING MACHINE OF UNDERLINE SPECIFICATIONS FROM REPUTED SUPPLIER/ MANUFACTURERS FOR A.P.M.C.PARBHANI DIST PARBHANI

Amount

Refrigeration Syatem

SITC - Air Cooled Condensing Unit, Evap -2.5 °C, Ambient 43 °C, Capacity 10.0 KW for R-404A Cond Unit ,HPLP Switch,Power KW6.0

SITC-Air Cooling Unitfor Cold Chamber ,Evap-2.5°C, Ambient43°C, Capacity10.0KWforR-404A,CMH9660, Static Pressure: 25mm on WC Fan 3 HP0.25

SITC - Refrigeration Copper Piping of sutiable sizes for the entire plant.

SITC-Freon Refrigeration Control sviz.Thermostatic Expansion Valves ,Valves, Check Valves, Strainers,etc

SITC-Suction line insulation with EPDM/XLPE/ Equivalent insulation with factory backed aluminium foil

SITC-Drainpiping with heavy duty PVC pipe for Aircooling units complete with necessary fittings and 9 mm EPDM/XLPE/Equivalent insulation with factory backed aluminium foil, pipe sizes uitable Aircooling unit drain

SITC-Freon Refrigerant & Oil, Adequat equantity required for complete system

SITC - Temperature Management System viz. Temperature Controller, Indicator For Cold Storage

Gas based Ripening System with Manual Controls for Two Ripening Chambers. (Inclusive of first supply of Two cylinders)

Ventilation system- Fresh Airintake and outlet system for 2Nos Ripening Chambers

Fabrication of Cabletray & pipe Support ,Nut Bolts & Miscellaneous items

Training of plant operators with and without load testing of coldstorage for achieving temperature and testing parameters of all electrical equipment sand documentation. The period of above testing would be for 10 days

Insulated Panel Structure and Thermal Insulation for Floor

SITC - Wall Panels - 100 mm PUF panels with accessories

SITC - Ceilling Panels - 100 mm PUF panels with accessories

Wall Panels - 80 mm PUF panels with accessories

SITC - Wall Panels - 60 mm PUF panels with accessories

SITC - Ceilling Panels - 60 mm PUF panels with accessories

SITC- Floor Insulation would be laid with PUFS labss and wich ed between two layersof Tarfelt. Thickness of insulation 80mm. (40mm+40mm)

SITC - Pressure relief parts suitable for mounting on Insulated panels of various thickness ranging form 60mm to 200mm with internal heaters for room temperatures ranging form 25 °C to (-) 30 °C

SITC-Single leaf Manual Cold room Swing / Hinge Door with Three Sided Wall Frame for positive application uptill +1 degree. PU Insulation 45Kg, PCGI sheet thickness 0.6mm, 80mm door thickness, for clear opening dimension 1200mm width and 2100mm Height with C flushing, Aluminium Wall frame and Door fitting accessories.

SITC - PVC Strip Curtains 1200 x 2100 x 3 mm suitable for 2°C operation

Storage Material Handling System

PVC Crates suitables for handling fresh fruits, Nikamal make Mo 64160 or eqvt del - JBC

Hand Pallet truck capacity 2000 Kg nylon steering

Miscellaneous items

Vibration Isolators for Condensing units

Minor structural opening in PUF panels / walls etc for piping, cabling etc and closing the same properly with finishinf

Electrical work for Refrigeration System

Electrical control panel (MCC panel) fabricated from 14 gauge CRCA sheet duly powder coated, compartmentlised suitable for controlling power required for Refrigeration system having suitable MCCB Incomer with measuring instruments & Indication lamps and Adequate quantity of outgoing DOL, S/D starter feeders with MCCB/MCB, Contactor, Relay, measuring instruments & Indication lamps and required MCCB/MCB feeders Installed at each condensing units

Supply , installation,testing and commissioning of Main PCC panel with fabricated main body 14 SWG CRCA sheet,door partition 16 SWG CRCA sheet,panel with dust & vermin proof,415 V 3 ph 4 wire,50 Hz ,floor mounting,indoor,single front panel, powder coated after seven tank pre- treatment & busbar copper electrolytic type supported on DMC busbar supports/insulator (density 1.6 A/sqmm) having suitable Incomer and out going feeders required for complete cold storage and required capacitors with APFCR to maintain the power factor unity

Supply, Installation, Testing & Commissioning of approved make Oil cooled Servo Voltage Stabilyser, Unbalanced load, 63 KVA, 330-500 V Input, 400+ 1% output, with IP MCCB with SC & OL, OP Contactor 3 Pole UV, OV, OL, by pass switch, spike suppressor and Alarm in case of faults. The Stabiliser should be supplied along with requsite quantity of transformer Oil of recomended grade.

SITC - Power and Controls - 1.1KV grade PVC insulated armoured / flexibl cables required for Refrigeration System

SITC - Hot dipped galvanized perforated type cable tray for Refrigeration pipes and cables

SITC - Earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm comp with all materials,

SITC - GI strip of required size used for earthing

Supply, erection & testing of Alarm System for any trapped person inside co room by providing illuminated push button switch

SITC - Main Lighting Distribution Board (MLDB) surface/ flush mounted suitab for Cold chambers and Ante room lighting

Point wiring in ISI mark HMS PVC conduit / Casing capping with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch

Wiring for plug on board with Switch socket

Supplying & erecting mains and alram system wiring with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire

Supply, Installation, Testing & Commissioning of 20 Watt LED Capsule type 65 protection, suitable for surface mounting and 2°C temperature

Supplying & erecting 10-12W, 230V Emergency Lamp of reputed make wi built in Battery

Supplying, erecting and commissioning of approved make of diesel generating set with alternator of 50 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722- 2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti- vibrating pads with standard control panel comprising meters,switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m. The DG Set should be with all standard accessories viz. Battery, Charger, large capacity Disel Tank etc.

Megastar Engineering