Providing VT Pump Sets to CPWS Scheme to B.Mattam and other habitations

Design, Manufacture, Supply, delivery, erection, testing and commissioning of 200 HP VT Pumping Machinery (ISI) Impeller and shaft made of Bronze/SS-CF -15 SS-410 with all Pumpset accessories at each pumping station, piping as per design requirement and as directed by the Department on turnkey basis including trial run. The rate is inclusive of engaging required man power, operate and maintain the facilities during the trial run period. The scope of the work includes Pumps, Motors, maintenance tools, errection and commissioning (also includes Vaccum Pump in case of HSC Pumpsets for priming) etc., complete for finished item of work as per the technical specifications and as directed by the department Engineer for the following Pumping Machinery capable of delivering water to the discharge 5000 LPM and 120 mts head mentioned 150 HP and Upto 250 HP - VT Pumpset. The rate is exclusive of GST

3% Extra on cost of Pumpset for each 1.5mts extra length or part thereof, of column pipe assembly over the intial length of 8.5mt is allowed.The extra length of column pipe is to be arrived = Cost of Pumpset X 3% for every 1.5mts)

Supply and delivery of 250mm dia PN-1.6(Mpa) "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation, cost of jointing materials for valves,labour and lowering of valve & CP, on DI pipeline with out bypass

Manufacture, Supply and delivery of 250mm dia PN-1.6(Mpa) DI D/F Tilting disc Swing Check Valves Slanted seated with maximum swing of 59 degree with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Shafts of stainless steel, shaft bearing of zinc free bronze and Integral body seat face & disc face with nickel-chromium overlay welding and micro finished. All the inside and outside of the body is to be coated with double coating of food grade epoxy liquid lacquer (EP-F) with minimum thickness of 150 microns, color: RAL 5005 Blue face to face dimensions according to EN 558-1/14/DIN 3202-F4, Flange dimensions according to EN1092-2/IS 1538 excluding all taxes, duties and including transportation, cost of jointing materials for valves,labour and lowering of valve & CP, on DI pipeline with out bypass

Provision for Bulk Flow meters