Providing commercial plywood storage shelves and Heavy storage rack for muddamal including other misc. civil work at GUVNL Police Station under Surat-R.C.O. of DGVCL

Name of work :- Providing commercial plywood storage shelves and Heavy storage rack for

muddamal includind other misc. civil work at GUVNL Police Station under Surat-R.C.O. of DGVCL

Description Qty. Unit Rate Amount

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

1 unserviceable materials with all lead and lift.(ii) In Cement 3.30 CMT 572.20

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

2 plastering upto floor two level and finished even and smooth 23.00 SMT 196.80

in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing & Laying Grenite slab 18 mm thick in skirting,

dedo, risers of steps and landing, sill laid on bed of 10 mm

3 thick base of CM 1:4 finished with flush pointing in white or 4.10 SMT 3261.00

colour cement as directed by EIC

4 Labour Charges for Edge Bevelling of Grenite 50.00 SMT 85.00

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

5 coarse sand) laid over and jointed with grey cement slurry 205.00 SMT 1009.30

mixed with pigment to match the shade of slab including

rubbing and polishing etc. Complete. (A) 25mm thick

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 (1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

6 adhesive material including dismentaling of existing flooring 10.00 SMT 1081.55

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete.

Using Imidacloprid 30.5 SCas Per IS 6313 part-II( (0.075%

7 concentration by mass) is recommended 10.5ml chemical 500.00 SMT 52.92

diluted with 5 liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S.

Structural steel work ( Confirming to IS 4923-1997) riveted,

bolted or welded in builtup for all type sections, in framed

work, including cutting, hoisting, fixing in position and

8 applying a priming coat of approved steel primer all 10700.00 KG 130.52

complete as per the structural designs and directions of

Engineer in charge.Column

Providing and fixing in position callapsible steel shutters with

vertical channels 20 x 10 x 2 mm braced with flat iron

diagonals 20 x 5 mm size with top and bottom rails of T_rin

9 40x 40 x 6 mm with 38mm dia, steel pulleys complete with 8.45 SMT 6097.38

bolts, nuts, locking arrangements, stoppers handles

including applying a priming coat of read lead paint

Description Qty. Unit Rate Amount

Providing and fixing Wooden file storage with 18 mm thck

ply wall mounted/floor mounted with openable shutters incl.

all necessary joints, 01 mm th. SF finish laminate , teak

wood lipping, SS concealed handle, sliding lock & necessary

hardware materials etc .All inside and outside ply shall be

made of commercial plywood 18mm thick and covered with

1mm thick SF laminate as per selection of EIC however work

should be executed as per instruction of EIC.

Details of Wooden file storage: Each storage will be

10 treated as single unit with 6 sides i.e. front(single/double 85.00 SMT 8000.00

shutters), Back, left, right, top and bottom. Each shutter

must be fixed on one of two vertical sides which should not

be more than 500mm width. The depth/breadth of cupboard

shall not be more than 500mm for each storage Height of

each cupboard shall not be more than 1200mm, each

cupboard shall have to be provide with 02 handle of SS,

magnets, 02 chain, 01 door stopper of SS and 01 lock.

Measurement will be taken only for front side.(i.e Height x

Providing and fixing 18mm thick horizontal shelve

made of commercial plywood in cupboard with both

side 1mm thick white lamination/sunmica (As per

11 requirement) and necessary fitting and fixtures shall be 35.00 SMT 2260.00

provided of SS, as per selection of EIC however work should

be executed as per instruction of EIC.

Providing and fixing wooden openable shutter with inner

plywood surface covered by 1mm th. SF laminate finish

using 18mm thick plywood shutter including teakwood

12 liping, SS conciled handle, sliding lock & necessary hardware 12.50 SMT 2700.00

materials etc. inside and liping french polish finish complete

in all respects by engineer in charge

Office Table medium 1500x750x750 mm

Supplying/Providing & assembling/arranging in position

standard table having top surface of minimum 25mm

thick Plywood Sheet, and side 18mm thick Plywood

sheet covered with all outer faces 1.0 mm thick and all

inner faces 0.8 mm thick laminated sheet and edge of

Teakwood fascia patti 8 to 10 mm thick with seasom

polished having necessary provision for wire

management data / computer / telephone cabling. The

13 inside Drawer unit body size of (400X580X715MM) 1 2.00 NO 10000.00

Drawer & 1 Shutter 18mmThick Plywood Sheet with,

S.S Hingies, Lock & Necessary hadware Included. All

supporting system should be matching with modular

partition framing & final finish. Rate is inclusive of

Keyboard tray run on telescopic ball bearing channel.

Keyboard tray of minimum 750 mm wide forming of

Plywood Sheet 18 mm thick. 18 mm thick Plywood

sheet partiotion for CPU trolley and for leg rest is fixed

Description Qty. Unit Rate Amount

Revolving chair Medium back

Supplying/Providing of Revolving chair- Medium back

made out from multi bend plywood structure having

density foam sleepwell, class-3 hydraulic height

adjustment of make- Rotvac, syncronic tilt mechanism,

nylon glass filled caster wheel of make Regal, Handle

of MS 16 gauge pipe with high quality chrome finish

PU, Base of chrome finish chair 26 inch diameter,

Rexine of neptune black coloured.....equivalent to

Geeken Model no. GP-163

Providing & Fixing 8 Seater approved standard

brand(SS 304) statinless steel dining Table including

15 inbulit SS chair as per require size including all labours 1.00 NO 78500.00

and materials as per instruction of EIC

Sloted Angle Rack Big open 1800x900x450 mm

Providing & supplying M.S. Slotted angle rack (Open

type) with eight adjustable shelves, finished with All

16 steel parts are finished in high quality MARPOL powder 3.00 NO 3570.00

coated after 7 tanks antirust treatment. Overall size:

1800x900x450, Angle: 40 x 40 x 2mm (4 nos.)

Shelves: 36” x 18” (20swg. 6 nos.) Corner plate: 8 nos.

Sofa bolts: 64 nos.,

The scope includes supply and erection /installation of

the item on site. fully upholstered sofa, Solid tropical

wood frame, fabric upholstery, polyfiber fill at arms

provides additinal cushioning, legs with S.S. legs,for

details and assembly work refer drawings, laminate to

be approved by client / consultants. The rate includes

17 cost of all labour, material and with necessary tools, 3.00 NO 22587.64

tackles, adhesive, screws etc. An external beading /

visible teak wood / veneer surfaces shall have matt

melamine polish and internal surfaces shall be finished

with French polish.for satisfactory completion of this

item. The rate also includes for all necessary items

required to complete the job as per design /drawing

and client / consultant's instructions.

18 light Duty 5ft.alluminum foldeble ladder 1.00 NO 2000.00

Miscellaneous expense for unforseen work which shall be

19 paid as per SOR Rate. Rate for Non SOR item shall be paid 1.00 JOB 50000.00

at approved rate analysed by EE Civil & DE Civil.

Total Amount Excl. GST

Total Amount Excl. GST

"All royalties, toll tax, local tax, development charges, and any other taxes etc., in respect of this contract and also any

statutory variation in future towards above mentioned taxes & any other taxes if levied in future by statutory authority

applicable to the this contract shall be payable by the con-tractor and DGVCL will not entertain any claim whatsoever in

The Contractor has to pay 1% Labour Welfare Cess of estimated cost to the concern Government Department.

The contractor shall produce the receipt of payment of 1% welfare cess from the respective govt. department before

submission of final bill, otherwise final bill for the works will not be finalized.

Description Qty. Unit Rate Amount

The proof of payment made by the contractor to the appropriate department shall be submitted to DGVCL, failing which

appropriate amount shall be withheld on getting information/instruction from the concerned department.

I /We agree to carry out the above work at

Add (+)________% above . Rs.

Less (-) _________% below Rs.

Total cost of work. Rs.

(Total cost of work Rs. ______________________________

Signature of Tendered CEO & SE (O&M)

Seal of company DGVCL,Circle Office Surat-R