Bid Document of Remaining work of Solid Waste Processing Plant under Swachh Bharat Mission Urban: 2 Grant for Dholka Nagarpalika. Dist.:- Ahmadabad

Name of work : Bid Document of Remaining work of Solid Waste

Processing Plant under Swachh Bharat Mission Urban: 2 Grant for Dholka

Nagarpalika. Dist.:- Ahmadabad

ABSTRACT OF SCHEDULE - B

Sr. No Name Of Work Amount

Remaining Construction work of Shed, platform for Solid waste

B1 Processing Plant

Electrification work for Solid waste Processing Plant

Internal Waste Moving Machine (Loader Machine) for Solid waste

B3 Processing Plant

B4 Forklift for Solid waste Processing Plant

B5 CCTV Installation (8 Nos) for Solid waste Processing Plant

18% GST will be paid extra on Schedule “B” Rate, filled rate accordingly.

I/We am/ are willing to carry out the work @ _____________ % Above /Below ____________

Percentage (Should be written in Figures and Words) of the Estimated rates mentioned above

amount of my/ our Tender work out as under.

Estimated Amount Estimated Amount

Tender Rs. 1,25,50,114.00 Tender Rs.

Add % Rs. Deduct % Rs.

Total Rs. Total Rs.

(In Words (In Words

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of

difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

Engineer Chief Officer

Stamp With Signature Dholka

Dholka Nagarpalika Dholka Nagarpalika

Of Contractor Nagarpalika

DHOLKA NAGAR PALIKA

Bid Document of Remaining work of Solid Waste Processing Plant under Swachh Bharat

Mission Urban: 2 Grant for Dholka Nagarpalika. Dist.:- Ahmadabad

Remaining Construction work of Shed, platform for Solid waste Processing Plant

Item Quantity Rate Per Amount

Demolition including stacking of serviceable materials and

1 disposal of unserviceable materials with all lead and lift. (i)

Demolition of Brick work and stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

Mortar. 105.06 550.40 Cu.m.

Dismantling steel work including distempering and stacking

3 the materials with all lead and lift. 3789.62 3.67 Kg.

Dismantling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materials and disposal

4 of unserviceable materials with all lead and lift. (i) G.I.

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (A)

Loose or soft soil 337.80 117.08 Cu.m.

Excavation for foundation for depth from 1.5m to 3.0m

Including sorting out and stacking of useful materials and

6 disposing of the excavated stuff up to 50 meter lead. (A)

Loose or soft soil 19.80 129.81 Cu.m.

Providing and laying rubble for appron (each stone

7 weighting not less than 40Kg.) including and packing and

filing in the interstices with quarry-spalls.

Providing and laying cement concrete 1:4:8 (1 Cement :

coarse sand :8 hand broken stone aggregates 40 mm

8 nominal size) and curing complete excluding cost of form

work in (A) Foundation and plinth

Providing and laying controlled cement concrete M 250 and

curing complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C work in

9 foundation footing base. (A) Foundations footing base of

columns and mass concrete

Providing and laying controlled cement concrete M 250 and

curing complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C work in

Column. 24.90 7176.96 Cu.m.

Providing and laying controlled cement concrete M 250 and

curing complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C work in

Ground Beam. 7.70 5834.87 Cu.m.

Providing and laying ordinary cement concrete M 200 and

curing complete excluding the cost of reinforcement for

R.C.C work by Trimix method by providing and Fixing 'C'

channels of 125mm x 125mm as per required level slope and

12 thickness of concrete leveling of placed concrete with

surface vibrator finishing the surface with power floater and

trowel light brooming on the surface as per manufactures

specification etc. complete as directed.

Filling available excavated earth (excluding rock) in

trenches plinth, sides of foundations etc. in layers not

exceeding 20cm in depth consolidating each depo sited

layer by ramming and watering 257.90 130.39 Cu.m.

Filling in foundation and plinth with Murrum or selected soil

14 in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

15 and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

(B) Conventional

Providing and laying controlled cement concrete M 200 and

curing complete including the cost of formwork but

16 excluding the cost of reinforcement for R.C.C work in RCC

Providing 20 mm thick double coat mala cement plaster on

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar

17 (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trowel including scaffolding curing etc.

complete. 444.70 272.48 Sqm

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape even

18 shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials. etc

complete 2093.70 114.53 Sqm

Providing T.M.T. Fe 500/500d. bar reinforcement (I.S.I.

Mark) for R.C.C. work including cutting bending, Binding

and placing in position complete upto floor two level.

Providing corrugated G.I. sheet of class-3 roofing fixed with

galvanized iron J or L Hooks, Bolts and nuts 8mm diameter

20 with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of

purlins, Rafters and Trusses.

Providing ridges or hips 600 mm overall in plain G.I. sheet

21 class-3 fixed with G.I.J. or L Hooks and nuts 8mm dia G.I.

Limpet and bitumen washer complete.

Providing and fixing 150mm wide 450mm over all

semicircular plain G.I.sheet class-3 gutter with Iron

22 brackets 40mm x 3mm size Bolts, Nuts, washers etc.

including making necessary connection with rain water

pipes. (i) 0.80 mm thick Sheet. 57.30 561.27 Sqm

Structural steel work ( Confirming to IS 4923-1997) riveted,

bolted or welded in built up for all type sections, in framed

work, including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer and two

coats of oil painting all complete as per the structural

designs and directions of Engineer in charge. 15301.00 131.50 Kg

Providing and fixing to wall ceiling and floor 6.0 kgf/cSmt

working pressure polythelene pipes of the following outside

24 dia low density complete with special flage compression

type fittings, wall clips etc. including making good the wall

celling and floor. (G) 110mm dia. 48.00 336.24 Rmt

Providing and fixing Chain link 2 10 x 10 gauge (Galvanized)

with M.S. Angle & flat at 1.80mtr spacings and nut bolt type

25 fitting with one coat of applying oil based priming coat and

painting two coat of oil paints on MS angle & flat etc.

complete. 90.00 488.34 Sq.mt

Lachate Collection Sump (3*3*2), Preparing structural

design of RCC Under Ground / Partially under ground /

above high ground level Reservoir of required capacity as

per relevant I.S. standards and constructing the same,

including excavation in all types of soil strata (induding

rock) including shoring strutting if required, for loose soil/

to protect from collapse. casting 100 mm thick P.C.C.

levelling course in M-15, Refilling the pit with proper soil

and disposing of the surplus stuff at all lead Including

cement plaster in CM 1·2 with approved water proofing

compound to all over inside container (i.e. walls, base, top

26 slab/dome bottom etc. all). Including all types of labour

and material charges of lowering, laying, erecting / hosting

and jointing of pipe assembly to inlet, outlet overflow,

washout and bye pass arrangement as per hydraulic design.

Providing and fixing accessorles, Cl Manhole frame and

cover, water level indicator, adequate cowl type ventilators

or lantern type ventilator with stainless steel jail RCC

chambers for valves. Providing and applying three coats of

water proof paint to the out side face of structure It also

includes satisfactory water lightness test as per relevant I.S.

code and painting name of scheme and capacity on the tank

as per direction of engineer in charge. 18000.00 6.32 liter

Item Quantity Rate Per Amount

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill.

DHOLKA NAGAR PALIKA

Bid Document of Remaining work of Solid Waste Processing Plant under Swachh Bharat

Mission Urban: 2 Grant for Dholka Nagarpalika. Dist.:- Ahmadabad

Electrification work for Solid waste Processing Plant

Sr. Item Description

No. Qty. Rate Unit Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box,

1 single mounting base frame covered with 20.00 359.56 Mtrs.

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D. Connector as directed. (a) with

medium class Rigid PVC pipe and accessories erected flushed

on wall/ceiling complete Cat – III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

2 type erected on PVC / Metallic/Wooden box, single mounting 8.00 539.34 Ea

base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D. Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete Cat –

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

3 metallic/white front plate modules erected on / in wall / 10.00 211.09 Ea

ceiling with following type accessories

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid PVC pipe and

accessories, (d) 3 wire 2.5 sq. mm

[i] 3 wire 1.5 sq.mm 200.00 73.73 Mtrs.

Supplying and erecting approved make Octagonal pole made

from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable

5 termination to be erected With Suitable foundation 30.00 5273.21 Ea

(Included) as per details given by manufacturer considering

site requirement.

(B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16

Bolts and 450mm long with necessary G.I. J Bolts .Approx

Supplying and erecting street light pole bracket comprising

main B Class MS pipe of 4.2 cm/require outside dia. complete

with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm or require size

pole top having sufficient fastners for fixing the brackets and

6 having suitable rise as per site condition as directed and 30.00 676.70 Ea

spread of 2 mtr.with suitable welded stiffener reducer and

with lock nut complete painted with one coat of Red oxide /

PU base primer and two coats of Aluminium / PU paint.

Suitable for side entry fitting brackets of following nos of

arms. (A) Single Arm bracket 2 Mtr

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of following

7 size to be erected as directed. 60.00 141.40 Mtrs.

(j) 4.00 Sq.mm 3 core round PVC sheathed

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

8 Luminaire efficacy> 85 lumens/watt ,LED LED driver 10.00 269.67 Ea

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of

following size of cables

(D) 3 1/2 core 70 Sq. mm

(G) 3 core 35 Sq. mm 200.00 221.19 Mtrs.

(F) 3 core 25 Sq. mm 250.00 187.86 Mtrs.

(E) 3 core 16 Sq. mm 450.00 165.64 Mtrs.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

10 to be laid on wall with necessary clamps or in existing trench 60.00 112.11 Mtrs.

/ pipe of following size of cables

(B) 4 core 6 Sq. mm

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications. (a) For Electrical Installation up to 440V

in normal soil Length of pipe - 1 Mtr Back filling compound -

1 Nos Bag of 15 Kg.

Making trench in Hard Murrum / Tar Road of suitable width

of 90 cms or required depth for laying any size of cable or

12 locating the fault all over the run and back filling the same 800.00 62.62 Mtrs.

and making the surface as normal ground.

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene (conforming to IS 14930 II ) with

necessary connecting accessories of same material at

13 required depth for laying of cable. below ground / road 800.00 62.62 Mtrs.

surface for enclosing cable and back filling the same to make

ground as per original. (A) 50 mm dia

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

14 with out going tails, insulating tape etc for following size of 20.00 38.38 Nos.

cables. (b) 2 to 4 core 6 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

15 pressure tool & connected to switchgear terminals with 38.00 6.06 Nos.

brass/cadmium plated nut bolts in an approved manner.

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

16 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire 30.00 8282.00 Ea

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. (v) above 120 to 160 watts Cat - III

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

17 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire 30.00 4825.78 Ea.

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (iI) above 48 to

Watts Cat – III

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with bakelite connector strip 4way & hinged doors

18 having locking arrangements with mounting clamp with nuts, 30.00 515.10 Nos.

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.

(B) 250mm x 200mm x 100mm [deep]

Supplying and erecting B class Galvanized iron pipe having

smooth finished bore of the pipe on both ends erected nuts

and bolts along the pole / wall shaping the pipe as per site

requirement. Pipe dia as following.

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

20 erected in existing box. confirming to IS 8828/1996 with ISI 5.00 270.68 Nos.

Supplying & erecting approved make IP 55 grade Company

fabricated Timer Panel of following capacity for switch On-

Off street lights on time scheduling basis made from 16G

CRCA sheet duly epoxy power painted inside and outside with

21 hinged doors and locking arrangement consisting of suitable 2.00 13350.18 Ea

size of 4 Pole MCB and 4 pole contactor (cat-III)with analog

time switch, auto manual switch of same make and suitable

input and output Bakelite terminals and with door earthing

approved by Engineer in charge. (B) 40 Amp

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 60 x 60 x

cm. Deep in below ground level with plinth of 45 cm x

cm(or 45 cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved manner. ( for

& 8/8.5 mtr pole)

Providing & erecting 240 V MCB double pole switch for

23 lighting Load (B Curve) having 10 KA breaking capacity & 35.00 328.25 Ea

confirms to IS : 8828 in existing box having following capacity

Providing & erecting 415 V MCB three Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity 20.00 843.35 Ea

Providing and erecting Steel cover as per drawing using

SWG M.S.sheet of following depth, to house the switch gear

etc. complete with locking arrangement and lock with

duplicate keys per cupboard and door handles erected with 10.00 3226.95 Sq.mm

necessary support and painting. (One coat red oxide and two

coat enamel paint) (A) with angle iron frame (i) For 25 cms.

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house 6.00 847.39 Ea

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (b) sheet steel

26 double door (IP-43), (ii) 6 way

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA.

and above at 415 V . having normal current rating 250A.

with variable thermal & magnetic release suitable to work on 2.00 20817.11 Ea

A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

27 housing. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Item Quantity Rate Per Amount

Supplying and erecting triple pole & neutral 440V / 500V

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

29 (C) Suitable for 300 Amp. capacity

Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer in-charge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S. sheet

for internal partitions with necessary accessories, supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation 4.00 10969.61 Sq.mm.

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket, heavy

duty end terminal connection, danger notice board,

necessary ventilation, earthing strip complete. The Panel

shall be painted with epoxy powder coating. (The rates

excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size.

(A) locally fabricated panel board

30 (i) with 350 mm depth

DHOLKA NAGAR PALIKA

Bid Document of Remaining work of Solid Waste Processing Plant under Swachh Bharat

Mission Urban: 2 Grant for Dholka Nagarpalika. Dist.:- Ahmadabad

Internal Waste Moving Machine (Loader Machine) for Solid waste Processing Plant

Item Quantity Rate Per Amount

Providing and supplying of front loader of Engine

maximum horsepower of 50HP with Arm lifting force (N)

14122 Newton, BS III as per specification.

DHOLKA NAGAR PALIKA

Bid Document of Remaining work of Solid Waste Processing Plant under Swachh Bharat

Mission Urban: 2 Grant for Dholka Nagarpalika. Dist.:- Ahmadabad

Forklift for Solid waste Processing Plant

Item Quantity Rate Per Amount

Providing and supplying of forklift of Engine maximum

horsepower of 50HP with Tonnage Capacity (ton)

Standard Load Centre Distance DH/DV for Forklift up to

4000 K gas per specification.

DHOLKA NAGAR PALIKA

Bid Document of Remaining work of Solid Waste Processing Plant under Swachh Bharat

Mission Urban: 2 Grant for Dholka Nagarpalika. Dist.:- Ahmadabad

CCTV Installation (8 nos) for Solid waste Processing Plant

Item Quantity Rate Per Amount

Providing and installation of CCTV convert secure 4MP

Camera with DVR/ GI Pole/ CCTV Camera/ 4TB Hard

disk/Power Supply cable/BNC, RC & DC Connector/CCTV

Cable /Rack installation -12 U/ UPS for electrical power

backup, I ball, Capacity:1 Kva / 32 inch TV 7 Back box as

per specification complete in all respect.