Construction of Office of the Assistant Director Animal Production Sperm Station Palampur (SW - Construction of Lab)

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains etc. (not exceeding 1.5 m (One decimal five millimete) in width or 10 sqm (Ten square metre) on plan, including dressing of sides and ramming of bottoms, lift upto 1.5 m (One decimal five millimete) , including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m (Fifty metre). All kind of soil/ordinary soil including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of materials.The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm.(three decimal one five millimetres) thick welded with angle iron in frame 30x30x5mm.(thirty into thirty into five millimetres) so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. (four metres)and removal of the same for insitu-reinforced concrete & plain concrete work in Foundation, footings basis of columns etc. and mass concrete as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm. (Three decimal one five millimetres) thick welded with angle iron in frame 30x30x5mm. (Thirty into thirty into five millimetres) so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs.(four metres) and removal of the same for insitu-reinforced concrete & plain concrete work in Lintels, beams, plinth beams, girders, bressumers and cantilevers as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work up to plinth level 1:5:10 (one Cement : five coarse sand : ten graded stone aggregate forty millimetres nominal size) with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the Government.

Providing, laying, Wearing 63 to 45mm ( Sixty three to forty five milimetre) nominal size Grading-2, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel 80-100 Kn. in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification Clasue 405 as per directions of Engineer-in-charge including carriage of materials, within all leads, lifts and other incidentals. .

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work up to plinth level 1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40 mm nominal size) with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, Malkana, tolltax, GST or other taxes imposed by the Government.

Providing and Laying cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate twenty millimetre nominal size)- all works upto plinth level. including all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, Malkana, tolltax, GST or other taxes imposed by the Government.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars with in all leads, lifts and other incidental. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Steel work welded in built up sections/ framed work/tubler section/angle section, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames ,guard bar, ladder, railing, brackets, gates and similar works as per the entire satisfaction and direction of Engineer-in- Charge.The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate twenty millimetres nominal size) as per the entire satisfaction and direction of Engineer-in- Charge.The rate includes octroi,royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate Twenty millimetres nominal size) as per the entire satisfaction and direction of Engineer-in- Charge.The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete1:6:12 (one cement : six coarse sand : twelve graded stone aggregate twenty millimetres nominal size) upto plinth level with Cement mortar 1:6 (one cement : six coarse sand) with in all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (one cement : six coarse sand) With F.P.S.(non modular) bricks:, as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts of materials and other incidentals. The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi,royality,Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 300x16 mm (three hundred into sixteen millimetres)size aluminium sliding door bolts , ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the entire satisfaction and direction of Engineer-in-charge.The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

300x10mm (Three hundred into Ten millimetres)

200x10mm (Two hundred into Ten millimetres)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete with in all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

125 mm (One hunderd twenty five milimetre)

100 mm (One hunderd milimetre))

15 mm (Fifteen milimetre) cement plaster on rough side of single or half brick wall of mix: 1:6 (one cement : six coarse sand), as per the entire satisfaction and direction of Engineer-in-Charge.The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Kota stone slab flooring 25 mm.(twenty five millimetres) thick over 20 mm(twenty millimetres) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (onr cement : four coarse sand) with in all leads, lifts and other incidental. The rate includes octroi,royality,Malkana, toll tax, GST or any other taxes imposed by the Government.

Providng and Fixing 0.60 mm ( zero decimal six zero milimetre) thick prepainted steel sheet Tata/ Reliance/ Jindal Sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 microns (twenty micron) over 5 microns (five micron) primer coating to back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating including fixing with preparinted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limp-et and rubber washers complete with all accesories within all leads,lifts and other incidental as required as per the Direction of Engineer-in-Charge.The rate including of octroi, royality, Malkana, tolltax tax, GST or any other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm(Sixty centimetre) over all with 0.60mm (zero point six Zero millimetre) thick prepainted steel sheets of Tata/ Reliance/ Jindal in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty ) microns over 5(Five) microns primer coating + back coat of polyster of 5(Five) microns over 5(Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm (Six millimetres)dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required within all leads, lifts and other incidental as per the direction of Engineer in Charges.The rate including of octroi, royality, Malkana, tolltax , GST or any other taxes imposed by the government. .

Providing valleys of 90 cm (Ninety Centimetre) wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm (Eight Millimetre)dia G.I. limpet and bitumen washers complete :1.60 mm(One point sixty millimetre) thick with zinc coating not less than 350 gm/m (Three hundred fifty grammes per metre)within all leads,lifts and other incidental as per the direction of Engineer in Charges. The rate including of octroi, royality, Malkana , toll tax, GST or any other taxes imposed by the government. .

Providing and fixing 15 cm (Fifteen centimetre) wide, 45 cm (Forty five centimetre) overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete 0.63 mm (Zero Point six three millimetre) thick with zinc coating not less than 275 gm/m² (Two hundred seventy five per square metre)with in all leads, lifts and other incidental. The rate includes octroi, royality,Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) 6 mm (Six millimetre) thick Cement bonded wood particle board as per IS:14276 with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately.with in all leads, lifts and other incidental. The rate includes octroi,royality,Malkana,toll tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm (Ten into ten into ten centimetre)of 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate) 20 mm (twenty millimetre)nominal size) and cost of cutting holes and making good the walls etc. :100 mm ( one hundred millimetre)diameter with in all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 mm. (one hundred ten millimetre) diametre on wall face unplasticised Rigid PVC rain water pipes confirming to IS : 13592 Type A, including jointing with seal ring confirming to IS : 5382, leaving 10 mm (Ten millimetre)gap for thermal expansion,(i) Single socketed pipes.with in all leads, lifts and other incidental. The rate includes octroi,royality,Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre)gap for thermal expansion.as per the entire satisfaction and direction of Engineer-in-charge.The rate includes octroi, royality, malkana, toll tax, GST or any other taxes imposed by the Government.

Bend 87.5° 110 mm (One hundred ten millimetre) bend

Shoe (Plain)110 mm (One hundred ten millimetre) Shoe

Providing and applying white cement based putty of average thickness 1 mm (one millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials with in all leads, lifts and other incidental. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer including carriage of materials with in all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture with in all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface toremove all dirt and remains of loose powdered materials.with in all leads, lifts and other incidental. The rate includes octroi,royality,Malkana,toll tax, GST or any other taxes imposed by the Government.

Applying priming coats with ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre (fifty grammes per litre) of approved brand and manufacture, with in all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety litre per ten square metre)over an under coat of primer applied @0.75 ltr/10 sqm (zero point seventy five litre per ten square metre) of approved brand and manufacture with in all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m (one metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge 20 mm (twenty millimetres)nominal outer dia Pipes including all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, Malkana, tolltax, GST or other taxes imposed by the Government

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 (twenty five) to 40 mm (forty millimetre) nominal bore including all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the Government

Providing and fixing White Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred millimetres) with C.I. brackets , with a 15 mm (fifteen Millimetres) dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required including all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, Malkana, tolltax, GST or other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two millimetres)dia P.V.C. Semi rigid pipe for sink or wash basin including P.V.C. waste fittings complete including all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, Malkana, tolltax, GST or other taxes imposed by the Government.

Providing and fixing PTMT liquid soap container 109 mm (one hundred nine millimetres)wide, 125 mm (one hundred twenty five millimetres)high and 112 mm (one hundred twelve millimetres)distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (one hundred five grammes) as per the entire satisfaction and direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the Government.

Providing and fixing PTMT 450 mm(four hundred fifty millimetres) long towel rail with total length of 495 mm (four hundred ninety five millimetres), 78 mm(seventy eight millimetres) wide and effective height of 88 mm (eighty eight millimetres), weighing not less than 170 gms.(one hundred seventy grammes) complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour as per the entire satisfaction and direction of Engineer-in-charge.The rate includes octroi,royality, Malkana ,toll tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass bib cock 15 mm (fifteen Millimetres) nominal bore of approved quality conforming to IS:8931 as per the entire satisfaction and direction of Engineer-in-charge.The rate includes octroi, royality,Malkana ,toll tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms (six hundred ninety grammes)15 mm (fifteen Millimetres)nominal bore. as per the entire satisfaction and direction of Engineer-in-charge.The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government..

RAJNISH KUMAR

Ms VIRENDER SINGH

A.R. Traders

Sahil Sharma

AMIT CHOUDHARY

CHANDER MOHAN RANA

Rajeev Kumar