Construction of 50 Bedded Integrated Ayush Rigpa Hospital at Bajaura, District Kullu HP SH Providing E.I therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. i) Group C. PLAZA / FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI /l&t.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. i) Group C. . PLAZA / FINOLEX / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI /l&t.

Supplying and fixing Metal boxes of 200mmx150mmx75mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket 3 Nos. outlet and 5/6 amps, piano type switch, 3 Nos. connections, painting etc. as required.(Computer Point)

Supplying and fixing Modular RJ-45 Cat-6 Jack including connections etc. as required.Make : Legrand (Myriu) / L&T ( Entice) / Anchor /SSK / ABB (Similar Class).

Supplying and fixing metal box of 150mmx75mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-. i) Exhaust Fan, Light duty, (Domestic) 300 mm sweep Make : Usha / Bajaj / Anchor Panasonic.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying & fixing wall bracket fitting single lamp with Plastic body holder cap/B22/E27 , complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Providing and fixing LED BULB 10 W B22 / E27/E14 base cap connections, etc. as required complete in all respects.

Supplying & fixing DOWN LIGHT 12W light with aluminium housing,complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-ch. Make:- Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Luminaires .

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Supplying & fixing 36 Watt Surface mounted LED panel made from extruded aluminium housing(surface)2ft x2ft complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects as per entire satisfaction of Engineer- in- Charge. Make:- Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Luminaires .

Supplying & fixing 24 Watt Ultra slim LED panel made from extruded aluminium housing frame Surface/recess/pendant )1ft x1ft Approx. complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects as per entire satisfaction of Engineer- in- Charge. Make:- Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Luminaires .

Supplying & fixing FOOT LIGHT 3W with base, glass diffuser,complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:- Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Luminaires .

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of 2 No C.P. connection rods 18" long, making good the damages, electrical connections,testing and commissioning etc. as required:- i) 25 Liter capacity water heater (Cat-A) Make:- Usha/Havell's/Bajaj.

Supplying & fixing 10 Watt LED mirror light High quality aluminium extruded with decorative end caps complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make:-Jaquar/Twinkle/Panasonic.

Supplying & fixing LED TUBE 20W,PC BATTEN, ,complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:- Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Luminaires .

Supplying & fixing 45 Watt LED Street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects as per entire satisfaction of Engineer- in- Charge. i) LED Street light 45W Make:- Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Luminaires .

Supplying & fixing 10 Watt LED bulk head comprising of pressure die cast housing with acrylic diffuser (IP65 protection) complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects as per entire satisfaction of Engineer- in- Charge. Make:- Make : Wipro / Bajaj / Phillips / Jaquar / (Twinkle) Luminaires .

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make : Usha / Bajaj / Anchor Panasonic.

Ceiling Fan 1200 mm sweep

Ceiling Fan 1200 mm sweep

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed Steel conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respectas per entire satisfaction of the Engineer in charge. Cable Make : PLAZA / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI / FENOLIX.

2x1.5 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respectas per entire satisfaction of the Engineer in charge. Cable Make : PLAZA / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI / FENOLIX.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respectas per entire satisfaction of the Engineer in charge. Cable Make : PLAZA / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI / FENOLIX.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required complete in all respectas per entire satisfaction of the Engineer in charge.. i) 3x1.5 Sq. mm. Cable Make : PLAZA / UNITECH / BONTON / KEI / BIYANI / GEMSCAB / CMI / FENOLIX.

Providing and laying of aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground in the same trench, in one tier horizontal formation to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering etc. of required size complete in all respectas per entire satisfaction of the Engineer in charge.Cable Make : -

Armoured cable 16 sq. mm (four core)

Armoured cable 150 sq. mm (3.5 core)

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respectas per entire satisfaction of the Engineer in charge.Make : L&T / Schneider / ABB / Legrand.

Double door-8 way (8+24),horizontal type

Double door-12 way (8+36),horizontal type

Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:.Make : L&T / Schneider / ABB / Legrand.

Supplying and fixing copper strip bus-bars suitable for 400 Amp. 415 volts capacity 4 No. each of cross-sectional area (50.80mmx9.50mm),in the existing enclosure with all accessories including connections etc. as required complete in all respectas per entire satisfaction of the Engineer in charge. Make : L&T / Schneider / ABB / Legrand.

Supplying and fixing copper strip bus-bars suitable for 800 Amp. 415 volts capacity 4 No. each of cross-sectional area (38.10mmx6.35mm),in the existing enclosure with all accessories including connections etc. as required complete in all respectas per entire satisfaction of the Engineer in charge. Make : L&T / Schneider / ABB / Legrand.

Providing and fixing following rating, four pole, 415 volts, On-Load change over switch unit, panel mounting, front handle operation, including drilling holes in the cubical, making connections, etc. as required complete in all respectas per entire satisfaction of the Engineer in charge. Make : L&T / Schneider / ABB / Legrand. i) 400 Amps.

Providing and fixing following rating and breaking capacity, 4-pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

63 Amp. -16KA

400 Amp. -35KA

Providing and fixing following rating, three pole, manually operated, draw-out type, air circuit breaker, microprocessor based release;SR18G, open execution, in the cubicle panel, making connections, etc. as required. i) 630/800 Amp. -50 KA; C-Power

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 415 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- i) 63 Amps. Cat-A.

Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respectas per entire satisfaction of the Engineer in charge. i) 63 Amps. Cat-A. Make : L&T / Legrand / Siemens.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete in all respectas per entire satisfaction of the Engineer in charge. i) Single pole 10 Amp. Cat-A. Make : L&T / Legrand / Siemens.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- i) Double pole. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respectas per entire satisfaction of the Engineer in charge. i) 40 Amps. Cat-A. Make : L&T / Legrand / Siemens.

Earthing with G.I. earth plate 600 mmx600 mmx 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 25mmx5mm G.I. strip at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Supplying and fixing G.I. tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required complete in all respectas per entire satisfaction of the Engineer in charge. ( for horizontal run)

Supplying and fixing G.I. tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required complete in all respectas per entire satisfaction of the Engineer in charge. ( for vertical run)

Providing and installing meter module containing 3no.indicating lights, 3 phase volt meter , 3 phase ammeter, in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required complete in all respects.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- i) 450 mm deep nominal

Supplying and fixing 20 Amps 4 Module AC Box with SP MCB plug Top metal enclosure on surface or in recess complete with connections, testing and commissioning etc. required .

Providing and fixing SS Enclosure For MCCB suitable upto 125A including drilling holes in the cubicle panel, making connections, etc. as required complete in all respects

KAMAL KISHORE SHARMA

Deepak Sood

Bhardwaj Electrical Co.

D.S Ranta Electrical Contractor