Design, Supply, Construct, Erection and Commissioning of Modular Structure through 3D Monolithic Precast Technology for AWCs (Anganwadi Centers) at Various Locations in the Gujarat State (PACKAGE-2 ) Banaskantha & Patan Districts (Forth Try)

Name of Work: Design, Supply, Construct, Erection and Commissioning of Modular Structure through 3D Monolithic Precast

Technology for AWCs (Anganwadi Centers) at Various Locations at Banaskantha & Patan District in the Gujarat State

BILL OF QUANTITIES

Item No. Item Description Quantities Unit Amount

Excavation for foundation for depth from up to 3.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse

sand : 6- graded stone aggregates 20 mm nominal size) and curing

complete including cost of formwork in PCC.

Fabrication and manufacturing of solid precast concrete element

with provisions of shear keys, connecting loops, dowel tubes and

proper lifting accessories for walls, beams, slabs, stairs, column

etc, of various thickness, shape and size of different concrete

grades manufactured in controlled factory environment with

approved methodology including moulds (Pallet system, Tilts form,

table moulds, battery moulds, vertical moulds, beam moulds,

column moulds, staircase moulds, Facade mould, etc.), mixing,

transporting and placing of concrete, vibrating, curing, finishing,

making necessary cutout/holes of required sizes for services, yard

handling & stacking all complete as per IS 11447:1985 and as per

3 approved shop drawings and design mix as per the direction of 2564.22 Cum 11334.96

Engineer-in-Charge (Cost of reinforcement, Mechanical, Electrical

and Plumbing inserts will be paid separately).Transportation of

Precast Elements by flat bed Trailor (Double / Triple axle 40ft

Length with proper accessories like A frame etc) from factory,

including the cost of loading , unloading & stacking at site with the

help of required capacity cranes.( All lead & Lift ) & using Concrete

grade M-35 (Cement content 370 kgs) For Columns

Fabrication and manufacturing of solid precast concrete element

with provisions of shear keys, connecting loops, dowel tubes and

proper lifting accessories for walls, beams, slabs, stairs, column

etc, of various thickness, shape and size of different concrete

grades manufactured in controlled factory environment with

approved methodology including moulds (Pallet system, Tilts form,

table moulds, battery moulds, vertical moulds, beam moulds,

column moulds, staircase moulds, Facade mould, etc.), mixing,

transporting and placing of concrete, vibrating, curing, finishing,

making necessary cutout/holes of required sizes for services, yard

handling & stacking all complete as per IS 11447:1985 and as per

approved shop drawings and design mix as per the direction of

Engineer-in-Charge (Cost of reinforcement, Mechanical, Electrical

and Plumbing inserts will be paid separately).Transportation of

Precast Elements by flat bed Trailor (Double / Triple axle 40ft

Length with proper accessories like A frame etc) from factory,

including the cost of loading , unloading & stacking at site with the

help of required capacity cranes.( All lead & Lift ) & using

Concrete grade M-35 (Cement content 370 kgs) For Beams

Applying general insecticide pest control treatment to floors,

cupboards etc including labour material etc. complete. Using

Imidacloprid 30.5Sc As Per IS 6113 part‐ II (0.075% cocentration by

mass) is recommended 10.5ml chemical dillute with 5 liter of

water appication 0.5 Litre chemical / Sqm of surface is

recommended as per I.S.

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and

Filling in plinth with coarse sand under floors including watering,

7 ramming, consolidating and dressing etc complete as directed by 4179.60 Cum 439.87

Engineer in charge.

Fabrication and manufacturing of solid precast concrete element

with provisions of shear keys, connecting loops, dowel tubes and

proper lifting accessories for walls, beams, slabs, stairs, column

etc, of various thickness, shape and size of different concrete

grades manufactured in controlled factory environment with

approved methodology including moulds (Pallet system, Tilts form,

table moulds, battery moulds, vertical moulds, beam moulds,

column moulds, staircase moulds, Facade mould, etc.), mixing,

transporting and placing of concrete, vibrating, curing, finishing,

making necessary cutout/holes of required sizes for services, yard

handling & stacking all complete as per IS 11447:1985 and as per

8 approved shop drawings and design mix as per the direction of 4931.69 Cum 12577.06

Engineer-in-Charge (Cost of reinforcement, Mechanical, Electrical

and Plumbing inserts will be paid separately).Transportation of

Precast Elements by flat bed Trailor (Double / Triple axle 40ft

Length with proper accessories like A frame etc) from factory,

including the cost of loading , unloading & stacking at site with the

help of required capacity cranes.( All lead & Lift ) & using

Concrete grade M-40(Cement content 400 kgs) For Fins Wall

Fabrication and manufacturing of solid precast concrete element

with provisions of shear keys, connecting loops, dowel tubes and

proper lifting accessories for walls, beams, slabs, stairs, column

etc, of various thickness, shape and size of different concrete

grades manufactured in controlled factory environment with

approved methodology including moulds (Pallet system, Tilts form,

table moulds, battery moulds, vertical moulds, beam moulds,

column moulds, staircase moulds, Facade mould, etc.), mixing,

transporting and placing of concrete, vibrating, curing, finishing,

making necessary cutout/holes of required sizes for services, yard

handling & stacking all complete as per IS 11447:1985 and as per

approved shop drawings and design mix as per the direction of

Engineer-in-Charge (Cost of reinforcement, Mechanical, Electrical

and Plumbing inserts will be paid separately).Transportation of

Precast Elements by flat bed Trailor (Double / Triple axle 40ft

Length with proper accessories like A frame etc) from factory,

including the cost of loading , unloading & stacking at site with the

help of required capacity cranes.( All lead & Lift ) & using

Concrete grade M-40(Cement content 400 kgs) For Slab

Providing TMT Bar FE 550D reinforcement for R.C.C. work including

10 bending, binding and placing in position complete upto floor two 1417081.45 Kg 94.99

Fabrication and manufacturing of solid precast concrete element

with provisions of shear keys, connecting loops, dowel tubes and

proper lifting accessories for walls, beams, slabs, stairs, column

etc, of various thickness, shape and size of different concrete

grades manufactured in controlled factory environment with

approved methodology including moulds (Pallet system, Tilts form,

table moulds, battery moulds, vertical moulds, beam moulds,

column moulds, staircase moulds, Facade mould, etc.), mixing,

transporting and placing of concrete, vibrating, curing, finishing,

making necessary cutout/holes of required sizes for services, yard

handling & stacking all complete as per IS 11447:1985 and as per

approved shop drawings and design mix as per the direction of

Engineer-in-Charge (Cost of reinforcement, Mechanical, Electrical

and Plumbing inserts will be paid separately).Transportation of

Precast Elements by flat bed Trailor (Double / Triple axle 40ft

Length with proper accessories like A frame etc) from factory,

including the cost of loading , unloading & stacking at site with the

help of required capacity cranes.( All lead & Lift ) & using

Concrete grade M-40(Cement content 400 kgs) For Chajja

Masonary work using Aerated light weight concrete block having

crushing strength not less than 35 kg/sqcm for super structure

12 above plinth level upto floor two level in Ready Mix mortar grout 2554.61 Cum 4592.85

peast having thickness 3 to 5 mm etc complete as per Technical

Providing 20 mm thick double coat mala cement plaster on interior

brick / concrete work for plastering comprising of base coat of

mm thick cement plaster in cement mmortar ( 1 Cement : 3 Coarse

13 sand) in rough finishing and 8 mm thick top coat of cement mortar 11170.50 Sqm 288.77

1:2 ( 1 Cement : 2 Coarse sand ) finished with trovel including

scaffolding, curing etc complete as directed by Engineer incharge.

Providing and Placing anchor MS bar having dia 16mm including

gusset plat of size 150 X 150 X 10mm thick including,

14 cutting,welding, grinding, grouting etc completed as per drawing & 10800.00 Nos 505.00

directed by engineer incharge.

Providing and applying the elastomeric joint sealant two

component, high performance polysulfide formulation conforming

to BS:4254 and ASTM C 920 having weathering resistance to ultra-

15 violet rays and shall exhibit shore A hardness of 25 and have 13672.80 Rmt 258.08

movement accommodation factor 25% including using of

compatible primer of approved standard etc. complete. For 20 mm

Providing and fixing side hunge Double shutter door including

using I.T wood frame having size 15 x 7.5 cm, shutter frame of

indian teakwood of 38 mm thick and pannel of both side

prelaminated particle board 19 mm thick of natural wood grain

shade with fixing of 2 x 3 cm T.W. moulding on both side, fixing of

5 mm thick tranparent glass in top ventilator and both side fix in IT

wood frame as per detail drawing including three coat of oil paint

with priming coat etc complete as per instruction of Engineer in

charge & approved make.

Providing and fixing side hunge Single shutter Door including using

I.T wood frame having size 13x7.5 cm,shutter frame of indian

teakwood of 38 mm thick and pannel of both side prelaminated

particle board 19 mm thick of natural wood grain shed with fixing

of 2x3 cm T.W. moulding on both side, as per detail drawing

including three coat of oil paint with primer etc complete as per

instruction of Engineer in charge & approved make.

Providing and fixing FRP frame size 100x50 mm and 28mm thick

FRP depress panel shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces for stiffening & also

18 taking hinges & fintures. The whole FRP frame & shutter is to be 340.20 Sqm 2004.70

water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary

screws & alluminium fixtures & fastenings & fastener sleeve.. Door

Providing and fixing window having extruded aluminum Colour

Powder Coated section frame main outer size 63.50 x 38.10 x

mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size

mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member

of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.0.659 Kg/mt

with sliding shutters of horizontal member size 40mm x 18mm x

19 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 1555.20 Sqm 1705.67

18mm x 1.29mm @ wt.of 0.456Kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window-W

Providing and fixing Ventilation of standard extruded anodised

Alluminium section of size 65 X 25 X 1.25 mm of section no

14031@ Wt 0.59 kg/Rmt with colour anodized alluminium fame

20 with 3 mm thick Bajari figured glass with adjustable louvers of 233.28 Sqm 2279.85

standard (I.S) make as per detail given in elevation etc complete as

per instruction of Engineer in charge & approved make.

Providing and fixing MS safety grills of required pattern for

Windows, Door using 16mm dia MS polished bars at 10 Cm C/C

spacing inserted and welded from inside to rectangular box type

21 frame CRC Pipes of required Size at required spacing as per design 67726.80 Kg 120.41

and hold fasting with coach bolts including one coat of red oxide

primer and two coats of oil painting etc complete.

Providing and fixing 60 x 60 Cm Granite Vitrified Tiles (GVT)

Colour/ Wooden Shed 10 mm thick vitrified tiles flooring over

mm average base of cement mortar 1:6 (1 Cement : 6 Sand) with

22 groove and filled the same with grout material of approved quality 6954.66 Sqm 1862.59

including finishing cleaning the surface etc. as directed by

Engineer in charge.

Providing and laying Black or Colour Machine Cut free edges,

Machine polished Granite Stone slab 18 mm thick single piece For

Stair, Step, Landing, Skirting etc as per design including fully

moulded round front edge and 1cm nosing and necessary groove

23 on trade of steps laid on 20 mm thick cement mortar 1:6 (1- 4359.96 Sqm 2994.59

cement : 6 coarse sand) jointed with grey cement slurry including

rubbing, polishing & Finishing etc complete as directed by

Enginner in Charge.

Providing and Laying Machine cut, Machine polished 7.5 cm wide

Blue Granite strip flooring laid on 20 mm thick cement mortar 1:6

(1 Cement :6 Sand) on Ramp for basement with length of Granite

24 strip minimum 2.50 Mt, jointed with grey cement slurry with 1399.68 Sqm 3466.47

pigment including rubbing polising, finishing etc complete as

directed by Engineer in charge.

Provding & Laying Granito vitrified tiles 60 X 60 Cm (GVT) Matt

finshed tiles in flooring treads of steps and landing laid over

mm (average) thick base of cement mortar 1:6 (1-Cement :

Coarse sand ) laid over and jointed with white cement slurry

including finishing with flush pointing and cleaning the surface etc

Providing and laying coloured glazed tiles Matt finish of the

size 300 mm x 300 mm x 8 mm in skirting, risers of steps and

26 dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse 495.72 Sqm 1510.54

sand) & jointed with white cement slurry. ( Flooring in WC)

Providing and laying coloured glazed tiles of the size 300 mm x

600 mm x 8 mm in skirting, risers of steps and dedo on

27 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed 2381.40 Sqm 1586.07

with white cement slurry. ( Dedo in WC)

Providing and fixing pre-cast Rubber Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic

compresed by mechanically pressed and as per approved design

including 75mm Sand layer for levelling and filling the joint with

sand in proper line and level etc complete as directed by Engineer

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials including Cement washing with portland

29 cement slurry of one coat on wall surface to give a smooth finish 50075.69 Sqm 101.25

including thoroughly broomings the surface to remove all dirt,

mortar drops and other foreign Brand etc complete as directed by

Engineer Incharge

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

smooth including Applying two coats of acrylic laphy (putty) & two

coats of primer of approved brand etc complete as directed by

Engineer incharge.

Providing and laying broken china mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along

the wall,clearing with water and oxalic acid etc. as directed by

Engineer in charged.

Providing & Fixing stainless steel Kitchen sink Glossy ASIS

Grade and 1 mm thick with with over all size 510mm X 432mm X

330mm deep having bowl size 445 mm X 368mm X 190mm with all

fitting C I Or M.S Brackets painted white or fixing on stone base

including cutting holes and making good the same brass waste and

M I fisher union fitting including all necessary fitting etc complete

as per instruction of Enginer in charge & approved make.

Provision and fixing water child Friendly toilet pan having size

500x275x580 mm specially for children as per WASH guideline

W.C. Pan with integral P or S trap including jointing the trap with

33 soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and 216.00 No 8585.00

cover to be measured and paid for separately)(A) vitreous China

Pattern :(i) in white colour

Providing and fixing washbasin with single hole for pillar tap with

C.I. or M.S. brackets painted white including sutting holes and

making good the same incluiding Providing and fixing C.P.32 mm

dia brass waste pipe, M.I 32 mm dia fisher union,with Necessary

34 Couplings (ii) Flat Back washbasin 550 mm x 400mm size. (1) in 216.00 Nos 4456.42

colour (Hindustan, Cera, Parryware ) including all Necessary Pacca

fitting etc.complete as directed by Engineer incharge.

Providing & Fixing PVC SWR Nanhi trap IS 14735 for drain 75mm

with jali of the following nominal diameter of self cleansing design

35 with C.I. Screwed down or hinged gratting including cost of cutting 864.00 Nos 681.49

and making good the walls.

Providing & Fixing S.W. Gully trap with C.I. Greating brick masonay

chamber and water tight C..I Cover with frame of 300 mm X

mm Size ( Indian ) with standard weight (i) Square mouth traps (C)

150 mm x100 mm size P or R Type.

Constructing Brick masonary chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strenght not less than 35kg/ cm2 in C.M. 1:5 C.I. Cover with frame (

light duty) 455mm x 610mm internal dimention total weight of

cover with frame to be not less than 38Kgs (weight of cover 23kg

and weight of frame 15Kg). R.C.C. tpp slab with 1:2:4 (1 cement :

coarse sand : 4 graded stone aggregate 10mm nominal size)

foundation concrete 1:5:10 inside plaster 1:3 finished smooth

with a floting cost of neat cement on walls and bed concrete etc.

comp. (i) inside dimension 455mm x 610mm & 450mm deep for

Providing laying and jointing in true line and level UPVC SWR pipe

Type B pipe confirming to IS 13592 -1992 with one end plain and

other end socketed with rubbering & fitting confirming to ISI

14735-1999 of approved make for drainage system pipe line,pipe

shall be jointed with each other with rubber lubricant,pipe shall be

fixed on wall using of PVC clamp of the size 160mm diameter x

210mm lenght x 196mm high at every 2000mm center to center or

shall be concealed in wall as directed including necessary fitting

such as bends,shoes etc. including testing of pipe and joints and

jointed with adhesive solvent cement including cost of all

materials. (i) 75 mm Dia

Providing laying and jointing in true line and level UPVC SWR pipe

Type B pipe confirming to IS 13592 -1992 with one end plain and

other end socketed with rubbering & fitting confirming to ISI

14735-1999 of approved make for drainage system pipe line,pipe

shall be jointed with each other with rubber lubricant,pipe shall be

fixed on wall using of PVC clamp of the size 160mm diameter x

210mm lenght x 196mm high at every 2000mm center to center or

shall be concealed in wall as directed including necessary fitting

such as bends,shoes etc. including testing of pipe and joints and

jointed with adhesive solvent cement including cost of all

materials.(ii) 110 mm Dia

Providing & Fixing G.I. Z Type heavy duty clamps with G.I. 6 mm

dia. ring for sutiable dia of pipe for Rain Water, Drainage, Water

40 Supply line including drilling holes, fixing of pipe, nuts, bolts, 1944.00 Nos 60.60

washers with all lead & lift etc complete as directd by Engineer in

Providing and fixing in position UPVC cowel went to pipes. (C)

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing and laying in true line and level U.P.V.C (Sch-40)

including fitting as approved by Engineer in charge. Pipe shall be

fixed on the wall with held of clamp at every two meter c/c shall

43 be concealed or open as directed including necessary fitting etc. 2160.00 Rmt 91.84

including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (ii) 25mm dia.

Providing and laying in true line and level U.P.V.C (Sch-40)

including fitting of as approved by Engineer in charge. Pipe shall be

fixed on the wall with held of clamp at every two meter c/c shall

44 be concealed or open as directed including necessary fitting etc. 2160.00 Rmt 72.65

including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (i) 15mm dia.

Providing and fixing screw down Half turn bib taps of following

45 size.(A) Brass screw down bib tap polished bright. (i) 15mm dia. 648.00 Nos 186.83

Providing & Fixing Double soap dish of SS 304 Grade of approve

46 quality including fixing with nut bolt washers etc completed as 216.00 Nos 606.00

directed by Engineer incharge.

47 Providing and fixing toilet paper holder.(A) C.P. Brass 216.00 No 392.24

Providng and fixing 600mm x 450mm bevelled edge mirror of

48 superior glass mounted on 6mm thick A.C. sheet or plywood 216.00 No 859.41

plug with C.P. brass screw and washers.

Providing erecting and fixing Double coated heavy duty Syntex

PVC. (ISI) water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

Providing and fixing ball cock of approved quality as directed (A)

Copper metal (i) 25mm dia.

Providing and fixing in position 300 to 150mm wide English /

Gujarati letters made from 1.0mm thick stainless steel sheet as

directed by Engineer in charge with all material, hardware,

accessories and fitting etc complete.

SIGNAGES ON WALL

Providing, Fabricating & Fixing wall signage's using 304 grade

Stainless steel brushed steel finish plate of 1.5 mm thick fixed on a

52 wall using s.s studs including punched (laser cut) lettering carried 432.00 Nos 1010.00

out on S.S. plate of required size and text as directed by Engineer

over the S.S plate etc complete. Size:75cmx15cm

Providing and Placing Pre-cast under ground water tank having

inside dimension 3000 lit of control cement concrete M-400

including using rainforcement about 60 Kg/cmt in bottom, Vertical

53 wall, slab having thickness 15 Cm including Excavating, PCC 1:2:4, 216.00 No 30300.00

MH Cover fixing of all inlet/outlet pipes etc complete as directed

by engineer incharge.

Providing and Fixing ABC Type DCP Extinguishers 5 Kg ( MAKE-

54 KANEX, ATASEE, SAFEX )etc complete as directed by engineer 216.00 No 2020.00

Providing and Fixing 2 Kg CO2 Capacity ( MAKE-KANEX, ATASEE,

55 SAFEX )etc complete as directed by engineer incharge. 216.00 No 5050.00

Providing and Fixing SS 304 Foldable Checking bed having size

X 0.60 X 0.75 mm including using of 25mm dia pipe, SS 2mm thick,

56 matter of 25.4 (1") of 40 density, cover with regine cloth of 216.00 No 6060.00

approved quality etc completed as directed by Engineer incharge.

Providing and Placing IT wood writing table having size 1.50 X

X 0.75 mt with one side drawer with using of 19mm thick WP

57 wood, top cover with 1 mm thick wood type Formica including 216.00 No 15150.00

using of all necessary material & labour etc completed as directed

by Engineer incharge

Providing and fixing Fabric cloth Curtain having length 1.8 mtr for

covering of checking area including using of alluminum sliding

channel etc complete as directed by Engineer incharge.

Providing and Fixing of SS 304 Hanger for bag including using all

59 necessary materials like SS rail, screw etc completed as directed by 4320.00 No 252.50

Engineer Incharge.

Providing and Fixing pin cushion display board having size 1.20 X

0.75 mt including using of alluminum section frame, 18mm thick

WB plywood, nevy blue Cushion cloth pin etc completed as

directed by Engineer Incharge.

Providing and placing Godrej type CRC sheet cupboard having size

1.20 X 0.45 X 2.10 mt including using of 1mm CRC sheet, including

5 row drawer, Safety chest box with locking arrangement, SS 15cm

long with handle etc apply one coat of primer and teo coat of oil

paint etc completed as directed by Engineer Incharge.

Providing and placing room flooring fabric type carpet of 5mm

62 thick including stiching of edge with embrodery fiber net etc 4536.00 Sqm 505.00

completed as directed by Engineer incharge.

Providing and Fixing Modular type furnture for kitchen cup board,

shutter drawer, using SS grill, SS sliding roller, SS Handle, Magnet

63 including using of all necessary articles materials like SS rail, screw, 349.92 Sqm 13130.00

nu, nolts etc completed as directed by Engineer incharge.

Providing and Fixing Modular type wall mounted cup board with

45cm deep & 90cm high including using of 12mm thick plywood

64 with both side laminated surface with drawer as per detail, SS 262.44 Sqm 9090.00

handle, SS lock,Stopper, magnet etc completed as directed by

Engineer incharge.

Providing and fixing modular type wall panneling as per detail

drawer with using of 12mm thick waterproof plywood, including

65 using all necessary materials like SS rail, SS screw, nut,bolts etc 324.00 Sqm 1515.00

completed as directed by Engineer Incharge.

Providing and fixing foldable MS ladder having 0.90mt wide &

3.60mt long including rod hinge arrangment at middle with ladder

66 including one coat of red oxide & two coats of oil paint etc 10497.60 Kg 119.46

completed as directed by Engineer incharge.

Providing and fixing of hook of 10mm or 12mm dia including

drilling hole, fixing of male- female thrade fastner sealing the same

with appoxy compound, finishing the same etc complete as

directed by Engineer incharge.

Providing and fixing medical device & equipment standio meter

height measuring scale 2.10mt long including fixing in wall with

using of all heavy SS screw, rail etc complete as directed by

Engineer incharge.

Providing and fixing Pre writing board having size 30cm X 20cm

69 with decorative acralic border etc completed as directed by 4320.00 No 404.00

Engineer incharge.

Providing and supplying standard PVC (Polyvinyl chloride) Chair

70 with handle of approved design and make as directed by Engineer 432.00 No 1010.00

Providing and supplying standard PVC (Polyvinyl chloride) Stool

71 having size 3.75 X 0.60 X 0.45mtr of approved make as directed by 432.00 No 606.00

Engineer incharge.

Point wiring for Light /Exhaust/ Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length

in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected

on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME

step type electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

74 metallic/white front plate modules erected on / in wall / ceiling 1080.00 Pt. 283.81

with following type accessories

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed

76 by Engineer In charge. 1080.00 Ea. 194.37

(9) 16 Amp. SP one way switch

(10) 6/16Amp. Universal socket

(24) Batten Holder/Angle Holder with modular frame with metal

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in approved manner

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 6 sq. mm

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed

84 1 no. 6A/16A universal plug-switch combined. 216.00 Ea. 924.86

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

85 LED driver efficiency > 85 % 1728.00 Ea. 702.31

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage capacity

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >=

86 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder 1296.00 Ea. 290.56

(iii) 10 to 15 watts

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

87 capacity 10 KA to be erected in existing box. confirming to IS 1944.00 Ea. 159.92

8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

(A) 6 to 32 Amp.

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

90 advance feature & do not incorporate any electronic component. 216.00 Nos. 2215.85

for following Max. rating erected as directed

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

(A)50 mm outer dia

Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C.

50 Hz 1200 mm sweep complete having 3blades with aluminium

blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and pierced

96 through a 16 Gauge M.S. box / Heavy Duty PVC box complete 1080.00 Ea. 126.25

erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan

hook or Fan box.

Supplying & erecting approved make low noise decorative exhaust

fan having square frame ABS body with inbuilt lowers & square

200mm with 1350RPM Cat.II

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

(iii) above 24 to 36 watts

Supplying and erecting approved make Segment time switch

suitable for 230V+10%16A. floating contacts with 24 hour dial

having15/30 min. segments with early manual override switching

for on & off without influencing the program sequence with quartz

time switch With power reserve, housed in fire proof

thermoplastic enclosure & transparent cover terminal covers

erected as required wire necessary connection erected as directed.

Supplying and erecting Street light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx. 45cms.length and

suitable for 76.5mm/80mm/require size of pole top having nuts

and bolts for fixing the brackets and having spread of 0.5 mtr.

Length with 110 deg.with vertical plane and suitable welded

stiffener reducer and nipple with check nut complete painted with

one coat.of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 0.5 Mtr

Providing & erecting approved make street light / wall mounting

junction box compression moulded from SMC (thermoset plastic)

vertical sliding cover having locking with square head stud loop in /

loop out in built terminal suitable for four core cable, waterproof

102 of I.P. 54 protected with clamp or bolt nut & earth bolt of 216.00 Ea. 454.13

following size.

Providing and erecting water cooler having storage capacity 80Ltr.

& cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚ C within a hour,

The water cooler should be comprising of hermetically sealed

103 compressor, fan motor, condensing unit, water tank surrounded 216.00 Ea. 18124.92

by evaporating coil, thermostats, relay etc. complete with

necessary inlet & outlet connection. The body of water cooler will

be made from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter

suitable buster DC pump capacity 80 psi, mention with 40 psi

inline type post carbon filter auto low & high pressure switches

with following size of storage tank & LPH capacity & erected as

[A] 10 Ltr / Hr with 7 Ltr StorageTank

Supplying & erecting approved make self-priming domestic

monoblock water pump with 1 H.P motor, suitable for operation

on 230 volts, 50c/s. AC supply with metallic flange, and M.S.

impeller delivery and following discharge.

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia. Delivery.

Supplying approved make domestic refrigerator of 165 Ltr to

106 Ltr storage capacity, single phase minimum 3 star rating 216.00 Ea. 13094.28

(A) Total Tendered Amount

(B) Rebate on Tendered Amount (if any) _______% (in Figures)

(C) Net Tendered Amount (A – B)

(* Please strike out whichever is not applicable).

1. All work shall be carried out as per public works Department Handbook and other specifications of Division or as

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold good for

4. To be Continued on additional sheets, if found necessary.

5. 1.00 % of Construction cost shall be deducted form Bill. Amount of Contract as per the Building and other

6. Credit of dismantled materials of amount of Rs. 0.00 must be recovered from Contractor's first R.A Bill.

7. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH / 102008 /

8 The contractor shall exhibit a board as per Government Circular No. Vernacular TNC/1090/24/S dated 05.03.2011

9 Testing of material shall be done as per statement attached with specification. The material should be tested in GERI

10 In all R.C.C. items in rate analysis, standard cement consumption has been taken as per Govt. GR. PRC- 10/ 2017/

11 The Contractor is solely responsible to bare all applicable taxes i.e. GST etc. & department will not entertain any

Dated Signature of Deputy Executive Engineer

the Contractor. Panchayat R & B Sub Division