Construction of Multipurpose Community Hall At Pachikhar Mulbegh (NFB)(Under Capex)

Plateform Cutting. Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

All Kinds of Soil@50%

Ordinary Rock@ 30%

Hard rock (B.P) 20%

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All Kinds of Soil@60%

Ordinary Rock@ 40%

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 grade stone aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Disposal of excavated earth by an average of 1 km by Mt

Providing /Fixing of web hole 75 mmdia PVC Pipe.

Main Building.

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kind of Soil 70%

Soft rock 20%

Hard rock(B.P) 10%

STONE SOLLING Dumping of stone including cost of stone (in horizontal on level)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centring and shuttering including strutting, propping etc. and removal of form for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for: LINTELS BEAMS ETC

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 40 mm nominal size)

Providing & fixing upto floor five level precast sun dried mud bricks in mud mortar using approved quality mud with carriage of material complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class Kail wood

Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(Second class kail wood 35 mm thick shutter)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class Kail wood

Providing and fixing of glass pan of thickness 4.0 mm weighing not less than 10kg/sqm including all types of fixture by way of wooden beading of second class kail wood etc completed.

Providing wood work in frames of walls,false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood (Note : False Celling Design should be as per engineer in charge which may be of different level celling) Budloo/Fir wood

Providing and fixing 100mm Pine wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface. 10 mm thick Brand - Rait Wood

Providing and fixing of cornice of 50x50mm of Budloo wood

Mud filling in between the joist behind the panelling

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with: 1st class kail wood

CEMENT PLASTER (IN COARSE SAND) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (Note: It Should have Low or No VOC as per Green Building guidelines)

Applying priming coat with readily mixed pink or grey primer of approved brand and manufacture on wood work. (Hard or soft wood)

Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.

Varnishing with varnish of approved brand and manufacture : Two or more coats glue sizing with spar varnish or an under coat of flatting varnish

French spirit polishing with two or more coats on new works incld a coat of wood filler

Providing & Fixing finished brass hanging type floor door stopper with necessary screws etc complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texturelaid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm

Providing and fixing 1st quality ceremic glazed wall tiles conforming to IS : 3753 of min thickness 5mm of approved make like NITCO,ORIENT, SOMANY

Providing and fixing ceramic glazed floor tiles 300x 300mm (thickness to be specified by the manufacturer ) of 1st quality conforming to IS: 13755 of NITCO ORIENT,SOMANY,KAJRIA or equivalent make in colour such as white etc

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with floating coat of neat cement including cement slurry and curing complete but excluding coat of nosing of steps etc complete. 50 mm thick with 20 mm nominal size stone aggregate

Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

PN - 16 Pipe, 25mm OD (SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

Providing and fixing PVC pipe 75,100mm dia including Tee, Elbow, socket, union, P-Trap Floor-Trap etc

Supply installation testing and commissioning of Instant Geyser 15ltr Capacity of approved brand (Havells/ Bajaj/ Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete

P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls andfloors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing wash basin with white vitreous chaina padestal with C I brakets 15mm c.p brass pillar trap,32mmC.P brass weast of Stranded pattern, including fittings of and brakets cutting and making good the walls wherever required, White vitreous China wash basin size 630×450mm witha pair of 15mm CP brass pillar Trap

Providing and fitting Sainatry fitting Accessories of Standard Qualite like Hindware, Cera as per directed by site Engineer

15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

15 mm C.P. brass 2 in 1 tap of approved quality conforming to IS standards

Wall mixer with shower all accessories

Soap dish,Towel railing and Tumbler etc

CP brass toilet Paper Holder

15 mm C.P. brass ABS Health Faucet Jet Spray with Hose and Holder of approved quality conforming to IS standards (KOHLER/JAGUAR/CERA)

Drain CP Grating

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040 mm bowl depth 250mm.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing of material for the insulation of Water Storage Tank of with nitrile sheet, tapping with cello tape, Rockwood 6 inch per side, wire mesh, polythene, aluminum sheet 26 gauge cladding with dia of, complete job. 19 mm thick nitrile sheet

Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required of approved brand or as per site engineer

AL Drop for room doors

T- Bolt for doors

Handles for door

T- Bolt for windows

Handles for windows

Classical cylinderical door lock for main door of approved brand Godrej or equivallent or as per engineer incharge

High water pressure S.S geyser connection pipe (2 feet long) of approved quality and make,

Supply installation testing and commissioning of Exaust Fan of approved brand (Havells/ Bajaj/ Crompton or any othet approved brand as per engineer in charge including all fixtures all complete

Design Supply and installation/Fixing staircase railling of stainless steel (Grade 304) railing(Top Handrail Dia > 50mm , two number intermediate Horizontal tubes Dia >25mm and Rectangular Two Pair Balusters Dia >38mm @1000mm C/C) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) including fixing the railing with necessary accessories , newal post , balusters and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, necessary screws/fixtures complete job as approved by engineer incharge (Note : No additional payment shall be made to master pillar/Newal Post )

Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge)

25MM WATER PIPE

32MM WATER PIPE

Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge

25MM WATER PIPE

32MM WATER PIPE

Providing hoisting and fixing trusses/ purlins/ rafters/ posts/ post plates or like components of 1st class budloo/fir wood including cost of screws etc complete.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing plained weather board & eaves boarding. 2nd class Deodar wood & 300x40 mm (nominal size)

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Random rubble masonry with hard stone laid dry in foundation, plinth & walls Laid without bond stone

Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with; Budloo wood

19mm thick wooden plywood of approved brand for almerah including all necessary fixtures and carraige complete job

Providing and fixing 2mm thick veneer lamination for cabinet doors approved by site engineer.

Carriage of sand/aggregate 30km by MT

Compound Walling.

Excavation work in excavation by manual means in foundation trenches, drains, pipes and cables etc. (Not exceeding 1.5m in width or 10sqm on plane) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus soils and directed, within a lead of 25 mtr. all kinds of soil.

All kind of soil 60%

Ordinary rock 40%

Dry stone pitching (any thickness) excluding cost of stones. on Horizontal

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)Mud Mat

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Centering and shuttering including strutting, propping etc. and removal of form for: Qty vide X-section

Walls (any thickness) including attached pilasters, buttresses, plinth

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, 12 fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Compound wall grill

Internal Electrification .

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in Existing surface/recessed medium class PVC conduit ,with modular switch,modular plate,suitable GI Box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required. (Make Havells/Polycab/KEI Group A)

Wiring for circuit/sub mains wiring along with earth wire of the following size of FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required.(Make Havells/Polycab/KEI)

2x2.5 sq.mm +1x2.5 sq.mm earth wire.

2x4 sq.mm + 1x4 sq.mm earth wire.

2x 10 sq.mm + 1x6 sq.mm earth wire.

2x 16 sq.mm + 1x6sq.mm earth wire .

Supply, installation,Testing & commissioning of Internal lighting fixtures

Providing & Fixing of IP40 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Back lit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of ≥ 120 lm / watt, THD < 10 % ,p.f.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted.

LED 15 W surface panel of lumen more than 1100 Round Shape. (do)

LED 10W Surface

Supply installation/testing and commissioning of LED flood light 50W with complete accessories (Make Havells/Philips/Panasonic/Syska/Gold medel)

E Fans,C Fans,WM Fans

P/F of exhaust fan shutter type of sweep 250mm in the existing opening, including making the hole to suit the above fan, making good the damage as required.(Make: Havells USHA/Bajaj)

S/F of 1200mm sweep 3 blades,energy efficient 5 star ceiling fan complete with assembling of blades,down rod,shackle insulator,canopy etc,including 2 modular stepped type modular fan rugulator. (Make: Havells/Crompton/Orient/USHA)

GI Box along with modular base & Cover plates

S/F following size/module, GI box along with modular base and cover plate for modular switches/sockets in recess etc. as required: (Make: Havells Crabtree/Legrand/Greatwhite/CONA/Gold medel)

1or 2 module (75mm x 75mm)

3 module (100mm x 75mm)

4 module (125mm x 75mm)

6 module (200mm x 75mm)

Modulars Switches and Sockets

S/F following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. (Make: Havells Crabtree/Legrand/Greatwhite/CONA/Gold medel)

6 amp switch

16 amp switch.

3 pin, 6 amp socket outlet

6 pin, 16 amp socket outlet

Indicator lamp

MCCB & MCB Distribution Board

MCB Distribution Board: S/F Double door MCB distribution boards, 240V/415V, Sheet steel, Powder coated DB’s suitable for MCB’s fitted with Bus Bar, Neutral link, Earth Bar and Din bar of following no. of ways : (Make: Havells/C&S/L&T)

16 Way double door SP&N

18 Way double door SP&N

S/F of 5 Amps to 63 Amps, 240/415V, “B series, ISI Mark” miniature circuit breakers suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required: (Make: Havells/C&S/V Guard)

Single pole 6A, SP MCB

Single pole 16A, MCB

Double pole 40A, DP MCB

Double pole 63A, DP MCB

200A ,4p changeover Switch

MAIN PANEL

Main Panel LT SITE of 250 A Bus bar Chamber with Incomer MCCB and Circuit breaker having the following specification TPN Aluminum Bus bar size: 30mm x 10mm with colour coded PVC Sleeves: (Take Bus-Bar Density:08A/ mm) Incomer : 200 Amp 4p,25KA MCCB 01 No Outgaing: 63 Amp DP Isolator 03 No Outgaing: 40 Amp DP C/O MCB 03 No Voltage Amps frequency Digital Meter 01 set CT Ammeter 200 Amps 01 set R Y B Indication light . 01 set

Charcoal/Salted Earthing

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Supply & Laying of Armoured Cable & End Termination

Supplying and laying following size and specification of XLPE insulated PVC sheathed armored cable with aluminum conductor for working voltage 1100 V grade as per IS: 7908, including thimble/lugs, double compression glands etc.of respective size. (Make: Havells/Polycab/KEI)

3.5C x50 Sq.mm Armored Al. cable

Supplying and laying of following size DWC HDPE Pipe ISI marked along with all accessories like socket ends, couplers etc conforming IS 14930,Part II Complete with fitting and cutting,joining etc.direct in ground (45 cm below ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc,complete as required. 75 mm dia (OD-90 mm & ID -54 mm nominal)

Electrical Heavy PVC Conduit Pipe for Slab

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of MS fan box

Supplying and fixing of 10 x 10 x 10 cm of concealed box

Please Enable Macros to View BoQ information