Repairing leakage by clamping method at raikhad area,mirzapur area ,and old jamalpur area jamalpur ward distribution network command area in jamalpur ward central zone.

Name of Work: - As per name of the work mentioned in Tender.

*Special condition of contract for Item_(Providing and laying of interlocking grey paver blocks

unishape of high density 60 mm thick...)mentioned in Technical volume.

● Successful bidder of this tender shall have to purchase 50% of total quantity of paver block from

Amdavad Enviro Projects Pvt. Ltd. The paver blocks shall be as per tender BOQ & tender specifications.

Payment of such 50% Quantity shall be made to Amdabad Enviro Projects Pvt.Ltd. directly by the

successful bidder on mutual agreement of rate between successful bidder & Amdabad Enviro Projects

Pvt. Ltd. AMC shall not be responsible for any kind of dispute between Amdabad Enviro Projects Pvt. Ltd.

& successful bidder or this tender. The successful bidder will be paid by AMC as per tender BOQ item

rate + premium.

● The quality, size, shape, compressive strength & other technical parameter of paver Block shall be as

per IS standards & tender specification and shall be completely successful bidder's responsibility.

● If in case of failure of paver Block or if Paver Block are not as per the standards, the same shall be

rejected. Successful bidder shall remove such failed paver blocks immediately form site and fix new paver

blocks as per standards.

● The successful bidder shall produce a certificate /bill from Amdabad Enviro Projects Pvt. Ltd. showing

quantity of Paver Block which should be minimum 50% of total quantity.

1. All the relevant causes mentioned in the Tender which are related to above clauses shall be read as

mentioned in above AMENDMENT.

2. The above Amendment shall be Part of Tender document & shall be bound to Contractor and shall be

submitted along with other tender documents with duly signed and stamped.

Seal and signature of the bidder Additional City Engineer

Date :- AHMEDABAD MUNICIPAL CORPORTION

Tender Fee : Rs 900.00 Date of submission : 23.02.26 Time: :18:00 Hrs

Earnest Money : Rs.9894.00 Date of Opening : 24.02.26 Time: 17:00 Hrs

Contractor’s Name & Address :

AHMEDABAD MUNICLPAL CORPORATION

MAHANAGAR SEVA SADAN

NAME OF WORK:- REPAIRING LEAKAGE BY CLAMPING METHOD AT RAIKHAD

AREA,MIRZAPUR AREA ,AND OLD JAMALPUR AREA JAMALPUR WARD DISTRIBUTION

NETWORK COMMAND AREA IN JAMALPUR WARD CENTRAL ZONE.

Sr. No. Quantity Items Rate Rs.Ps. Per Rs.Ps.

1 Cost Labour Work

a 70.00 Unskilled Labours per shift 452 no.

b 7.00 Semiskilled labour per shift 474 no.

Fitter/Mason/Gas operator per

c 60.00 shift 631.36 no.

d 25.00 Supervisor per shift 673.73 no.

e 100.00 Welder per shift 673.73 no.

2 Cost of Materials

a 5.00 Lead 204.24 kg.

b 45.00 Jute (Spun Yarn) 83.9 kg.

c 1100.00 M-Seal 100 gm. pack 25.42 no.

d 150.00 Cement bag 334.75 Bag

e 20.00 Kapachi + Grit- Aggregates 1690.68 Cmt

f 1.00 Sand 1467.8 Cmt

g 20.00 Nut Bolt 89.83 kg.

h 45.00 MS Plate 90.68 kg.

i 2100.00 MS pipe /piece 101.69 kg.

j 250.00 MS Ring flange 150.85 kg.

k 60.00 MS Blank flange 114.41 kg.

l 60.00 Rubber Gasket 76.27 kg.

S.S. Spindle Rod, any Dia. With threads.

m 30.00 (Wt.of Finished Material) 989.83 kg.

Gun Metal Nut with threads. (Wt.of finished

n 15.00 Material) 1334.75 kg.

o 15.00 Rubber Paint 207.63 litre

p 14.00 Structural Steel Work 77.12

q 3.00 Roller assemblies 381.36 no.

r 25.00 SS wire rope 59.32 rmt.

s 1.00 wooden float / rubber ball 593.22 no.

t 17.00 Anchor bolts 74.58 no.

Providing & Supplying of

good quality of rubber rings

3 for following dia meter.

Rubber Ring for 400 mm dia

a 5.00 pipe 338.98 no.

Rubber Ring for 450 mm dia

b 2.00 pipe 381.36 no.

Rubber Ring for 500 mm dia

c 2.00 pipe 457.63 no.

Rubber Ring for 600 mm dia

d 2.00 pipe 550.85 no.

4 For Welding Joints

a 30.00 Rent of DG set per shift 1694.92 no.

Rent of Welding machine per

b 60.00 shift 1016.95 no.

Rent for Grinder machine per shift (incl.

c 60.00 Nece. Required Disk) 322.03 no.

d 60.00 Gas Cutting set per shift 487.29 no.

e 6.00 LPG bottle 1991.53 no.

f 55.00 Oxygen bottle 322.03 no.

Rent of Tools & Other

Rent of Chain pulley block &

a 7.00 Tripod per shift 423.73 shift.

Rent of de-watering pump (1.5 to

b 80.00 HP) per shift 423.73 shift.

Rent of de-watering pump with fuel (1.5 to

c 1.00 HP) per shift 889.83 shift.

d 65.00 Rent for JCB Machine 535.71 Hrs

Providing & Supplying Hitachi

e 1.00 Machine-110 1800 Hrs

Providing & Supplying hydra crane

f 1.00 Machine 5169.49 shift

g 2.00 Dumper / Trucks for 8 Hr. 8000 shift

Transportation of machinery to

h 90.00 or Fro 377.12 Trip

Rent for Scaffolding by H frame incl. Khapeda

i 7.00 (per pair per day) 38.14 No.

Electric Demolition Hammer (11-

j 50.00 E) per shift 932.2 no.

Cement grouting pump per

k 1.00 shift(With Gasket) 389.83 no.

Provdg. And fixing to wall, ceiling &

floor galvanised mild steel tubes (Medium

Charges for Water connection by making

6 hole in CI/DI/MS main line

Provdg. & Fixing Gun Metal check or

7 2.00 full wheel, …50 mm 1027 no.

8 For Masonry & RCC Work

Carting of Debris for lead from

a 2.00 m to 5 Kms. as directed. 66.19 Cmt

Supply cutting, Bending, Binding and

placing in position steel as per plan and

design and as per ISS 2502 including

cost of steel and binding wire for

reservoirs/ structures only including lift

up to 6 meter height or depth below

G.L. for all diameters.

Deformed(TMT) bars confirming to

relevant IS Fe-500 grade for all

b 10.00 diameters. 77.504 Kgs.

P/F Dead shuttering for slab, beam

c 4.00 etc. 338.98 smt.

d 125.00 Providing & Supplying Bricks 6.78 no.

Proving and Fixing F.R.C. Extra

Heavy Duty (EHD-35) Manhole

9 1.00 Covers 2125 no.

To provide Tractor with Hydraulic

Trolley, driver with fuel, to

carryout different works during

day/night for 12 Hrs. Shift. Work

shall be carried out as per the

instructions of Engineer In-Charge.

No extra charged shall be paid for

10 1.00 night shift. 1473.21 no.

(in words also)

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

1 Name of work REPAIRING LEAKAGE BY CLAMPING METHOD AT RAIKHAD

AREA,MIRZAPUR AREA ,AND OLD JAMALPUR AREA JAMALPUR

WARD DISTRIBUTION NETWORK COMMAND AREA IN JAMALPUR

WARD CENTRAL ZONE.

2 Time Limit 12 Months

3 Eligibility Criteria Register “E1” class in PWD in Govt. R&B/CPWD/AMC or equivalent

registration with any other state Govt. or institutions.

4 Estimated Cost put to tender Rs.

5 Earnest Money Deposit Rs.9894.00 (Demand Draft, Pay order, Bank Guarantee (As per finanance

circular No 56) or Cheque in favour of Municipal Commissioner,

Ahmedabad) To be submitted as prescribed in 7.0 below. Demand Draft

or Bank Guarantee shall be from Nationalized Bank and valid for 120 days.

6 (A) Security Deposit: 5 % of Tender Amount

(B) Retention 1. @ 2% of the value of work done will be deducted from each RA bill. It

will be released along with release of payment of Final Bill.

7 Tender fees Rs.1500/-Demand Draft / Pay order in favour of Municipal Commissioner,

(Non refundable) Ahmedabad)

8 Submission of EMD and In separate sealed cover each for EMD and Tender Fees along with

Tender Fees Tender as described in the invitation of tender and submitted to Assistant

Manager (central zone) , Ahmedabad Municipal Corporation, sardar patel

bhavan Ahmedabad-380015

9 Tenders issue date Tenders from the website http://amc.nprocure.com and

http://nprocure.com. shall be down loaded from

10 Last date of receiving Dt. 24.02.2025 up to 16:00 Hrs The tenders received after this date

Tenders. and time will not be entertained under any circumstances.

11 Date of Opening Dt. 24.02.2026 at 17.00 Hrs to Assistant Manager "South west

Zone Shree Tushar Deshmukh Bhavan, Nr. Shelby hospital, Opp.

karnavati Club, S.G. highway, Jodhpur, Ahmedabad-380015

12 Mode of sending the Tender Document shall be submitted in sealed envelope systems By RPAD/ Speed

Documents post/ Hand Delivery/ Courier in sealed covers as described in submission

13 Terms, Condition, & All general condition of contract of Form B1 condition of contract shall be

Specification applicable.

14 GST ltKtk Ftðþ vhevºt lkch - 31, yb>tJt> BGþrlrm5j ftuvtuohNl btk Ítulj ytuVem / v.J.yu. / «tusu¾x rJCtd îtht htuz /

<t.07-07-2017 Bþsc rcÕz´d/jtEx/c{es Ft<tytu îtht cnth vtzJtbtk ytJujt xuLzh suLþk mcbeNl <t.01-07-

2017 vAe fhJtLþk &tg Au, <uJt <btb xuLzhtubtk <&t nJu vAe cnth vtzJtbtk ytJlth

Wvhtuf< rJCtd/Ft<tltk <btb xuLzhtubtk (bxehegj + juch mÃjtg mt&u) GSTlt

ltuxeVefuNl Bþsc GST sgtk jtøþ vz<tu ntug ðgtk, m>hnwk ftblt Bidder yu GST

ltuxeVefuNl Bþscle yuÃjefucejexe ægtlbtk htFelu huxLþk cez´d fhJtLþk hnuNu.

Conditional tenders will not be accepted. Municipal Commissioner reserves the rights to reject any or all the

tenders without assigning any reasons thereof.

Seal and Signature of the Bidder Addl. City Engineer

AHMEDABAD MUNICIPAL CORPORATION

Invitation for Bid (IFB)

1. The AHMEDABAD MUNICIPAL CORPORATION, (Hereinafter called “the Employer”) invites sealed

Tender document from reputed and qualified bidders for the construction of Works detailed in

the Table below:-

Sr. Name of Works Approximate value Bid Security Completion

No. of works (Rs.) (Rs.) Period

1 REPAIRING LEAKAGE BY CLAMPING Rs.9,89,415.16 Rs. 9,894.00 12 months

METHOD AT RAIKHAD AREA,MIRZAPUR

AREA ,AND OLD JAMALPUR AREA

JAMALPUR WARD DISTRIBUTION

NETWORK COMMAND AREA IN

JAMALPUR WARD CENTRAL ZONE.

2. Tender (a complete set of bidding document) fee shall be Rs.2400/- in the form of Demand Draft

/ Pay Order from any Nationalized Bank in favor of MUNICIPAL COMMISSIONER, Ahmedabad,

payable at Ahmedabad, which shall be non refundable. The fees shall be paid at the time of

submitting the tender.

3. Interested bidders shall download the tender documents from website http://amc.nprocure.com

and http://nprocure.com. up to Dt. 23.08.2023 at 16:00 hrs tender fee as mentioned in clause

above shall be paid by the bidder at the time of bid submission.

4. All bids must be accompanied by Bid Security of the amount specified for the Works in the above

Table payable at Ahmedabad and drawn in favor of AHMEDABAD MUNICIPAL CORPORATION,

Ahmedabad. Bid Security will have to be in any one of the forms as specified in Clause of ITB

(Instructions to Bidders).

All Bids must be delivered to Assistant Manager "South West Zone, Zonal Office", Late Shree

Tushar Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club, S.G. highway, Jodhpur,

Ahmedabad-380015.

Seal and Signature of the Bidder Addl. City Engineer

AHMEDABAD MUNICLPAL CORPORATION

MAHANAGAR SEVA SADAN

DETAILS OF BANK ACCOUT

1 Contractor's name

3 Telephone/ mobile no.

4 Permanent account no. (PAN

5 Name of the bank

6 Branch name and address

11 Contractor/ supplier's

signature and stamp

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL CONDITION

1. Contractor shall produce the relevant registration certificate of AMC / State Govt /Central Govt.

2. Contractor shall register the work to labour commissioner as per labour act.

3. Contractor shall not sub-let the work without permission of the authority

4. Contractor should have sufficient skilled and unskilled laborers so that he shall start work at different

sites simultaneously. Contractor's having labour force available during festivals shall only apply.

Contractor can not stop the work due to on availably of labour force. In case progress is delayed,

contractor shall be penalized 0.1% of Tender amount per day for work done after time limit,

maximum up to 10% for remaining work.

5. Bitumen rate difference will be paid as per tender conditions, if applicable.

6. Advance payment / machinery advance will not be paid.

7. Payment of running bill will be made as per recent A.M.C. policy in force.

8. No extra payment will be made due to increase of central / state Govt. Taxes. Exluding GST as per As

per circular no 38 Date 21.11.2022 of finance department of Ahmedabad Municipal Corporation

9. If the work is not completed within time limit the penalty will be recovered from immediate bills of

10. If the material i.e. MH cover C.C block etc. supplied from Municipal Corporation store then

contractor shall not claim for any extra rate for non execution of such item, partly/fully.

11. In the specifications, "as directed"/"Approved" shall be taken to mean, "as directed"/approved" by

the Engineer-in-charge.

12. Wherever a reference to any Indian Standard appears in the specifications, it shall be taken to mean

as a reference to the latest edition of the same in force on the date of agreement.

13. In "Mode of Measurement" in the specifications wherever a dispute arises in the absence of specific

mention of a particular point or aspect, the provisions on these particular points, or aspects in the

relevant Indian Standards shall be referred to.

14. All measurements and computations, unless otherwise specified, shall be carried out nearest to the

following limits:

(i) Length, width and depth (height)------- 0.01 Meter.

(ii) Areas -----0.01 Sq. Mt.

(iii) Cubic Contents ------0.01 Cu.Mt.

15. The distance, which constitutes lead, shall be determined along the shortest practical route and not

necessarily the route actually taken. The decision of the Engineer-in-charge in this regard shall be

taken as final.

16. Where no lead is specified, it shall mean "all leads"

17. Lift shall be measured from plinth level.

18. Definite particulars covered in the items of work, through not mentioned or elucidated in it,

specifications shall be deemed to be included there in.

19. Reference to specifications of materials as made in the detailed specification of the items of work is

in the form of a designation containing the number of the specification of the material and prefix 'M'

20. Approval to the samples of various materials given by the Engineer-in-charge shall not absolve the

contractor from the responsibility of replacing defective material brought on site or materials used in

the work found defective at a later date.

21. The contract rate of the item of work shall be for the work completed in all respects.

22. No collection of materials shall be made before it is got approved from the Engineer-in-charge.

23. Collection of approved materials shall be done at site of work in a systematic manner. Materials shall

be stone at site of work in a systematic manner. Materials shall be stored in such a manner as to

prevent damage, deterioration or intrusion of foreign matter and to-ensure the preservation of their

quality and fitness for the work.

24. Materials, if and when rejected by the Engineer-in-charge, shall be immediately removed from the

site of work within 24 hours.

25. No materials shall be stored prior to, during and after execution shall be kept in sufficient numbers

and in good working condition on the site of the work.

26. All works shall be carried out in workmanlike manners per the best techniques for the particular

27. All tools, templates, machinery and equipment for correct execution of the work as well as for

checking lines, levels, alignment of the works during execution shall be kept in sufficient numbers

and in good working condition on the site of the work.

28. The mode, procedure and manner of execution shall be such that it does not cause damage or over

loading of the various components of the structure during execution or after completion of the

29. All necessary safety measures and precaution (including those laid down in the various relevant

Indian Standards) shall be taken to ensure the safety of men, materials and machinery on the works

as also of the work itself.

30. The testing charges of all materials shall be borne by the Contractor unless recovery at one percent

towards testing charges is separately made.

INSTRUCTION TO TENDERERS

TENDER VALIDITY PERIOD:

The tender shall be kept valid for acceptance for a period of One Hundred Twenty Calendar days

(120) from opening of price bids.

SECURITY DEPOSIT

Within 10 days of receipt of Acceptance from the Corporation, the successful tender shall furnish to

the Corporation Security Deposit of 5% (five percent) of the contract price cheque or Bank

Guarantee, pay order, or demand draft of Nationalized Banks and Schedule Banks only.

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (Central Zone)

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL SPECIFICATION

Time limit for the work shall be 12 Month after the order to start the works. Progress of work should be in

proportion to time limit.

The contractor shall be remain responsible for Workmen’s compensation if any accident. The contractor

shall arrange for barricading at night and arrangement of Pagi at night to direct the traffic. He shall be responsible

for any damage to public. If any incident happen, during the execution of work. In case of dispute for unseen or

overlooked items the decision of the Dy. City Engineer shall be final. The contractor shall have to give site clean of

all rubbish during the work and at the time of completion of work and hand over the site with final finishing of

the work as directed. All the rejected materials shall be removed from site within 24 hours by contractor at this

risk and cost. Debris shall have to cart daily from site.

If any extra item crops up during the progress of work the same shall be carried out by the contractor and he shall

be paid at the rate fixed by Add.C.E. as per the rate analysis based on latest SOR or if item is not available in SOR

than based on current market rates. In case of extra item decision of Add. City Engg. shall remain final regarding

If in the interest of the Corporation it is necessary to change either any site or the design of the propose work the

contractor shall carry out the same at his quoted rates without charges any extra and the contractor will have to

carry out the works and he will be paid at the rate quoted by him. No claim for extra rate for subsequent changes

in site and design is entertained.

Octroi exemption passes shall not be given for any materials required for the work. Contractor will be fully

responsible for compliance of the various provisions under contract Act. 1970 and the Rules framed the to under.

The tender for the work shall remain open for a period (120) days from the date of opening of the tenders for this

work and that the tenderer shall not be allowed to withdraw on modify the offer on his own during the period. If

any tenderer withdraw or makes any modifications or addition in the terms and conditions of his tender not

acceptable to the Municipal Corporation the Municipal Corporation shall without prejudice to any right or

remedy be at liberty to forfeit in full the said earnest money and black list the contractor.

If the work is not carried out within the specified time limit. from the date of order to start the work the penalty

of Rs.- ( As per Form - B1) per day of delay shall be recovered from the immediate bills payable to the contractor.

Contractor has to make his own arrangement for procurement of steel and cement.

Contractors should note the following conditions carefully:-

i) Conditional tender shall not be accepted.

ii) All tenders are to be submitted in duplicate without which the tenders are liable to be rejected.

iii) In case of tender downloaded from website, tender fee & EMD should be submitted in form of demand draft

iv) Condition of Form - B1 Standard Specification of material & code of practice will be applicable. Form B1 can

be is available in website. Specification shall be as per ' R& B Dept. - Govt. of Gujarat booklets of Building

Works & and Road Works Specifications published by Gujarat Book Depot, Sector-21. Gandhinagar.

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (central West Zone)

SPECIFICATIONS OF MATERIALS – CIVIL

This section gives detail specifications for mainly used materials, for other materials refer Building Specifications.

For materials relevant specification of Building Specification shall apply.

TECHNICAL SPECIFICATIONS:

Following technical specifications shall be applicable to the relevant items of BOQ

Name of work : Maintenance work, Repairing and Restoration work of CI/DI/MS&PSC line in all

Water disribution network and leakage repairing work and other misc. works at Bodakdev Ward of

North West Zone

Cost Labour Work

a Unskilled Labours per shift

b Skilled Helper per shift

c Fitter/Mason/Gas operator per shift

d Supervisor per shift

Skilled Welder per shift

Cost of Materials

b Jute (Spun Yarn)

c M-Seal 100 gm pack

e Kapachi + Grit- Aggregates

g Rubber Ring for 400 mm dia pipe

h Rubber Ring for 450 mm dia pipe

i Rubber Ring for 500 mm dia pipe

j Rubber Ring for 600 mm dia pipe

l MS Plate /sheets /Angle / channels

m MS pipe /piece

n MS Ring flange

o MS Blank flange

p Rubber Gasket

S.S. Spindle Rod,any Dia.With threads. (Wt.of Finished Material)

r Gun Metal Nut with finished Material)

t Roller assemblies

u S.S. wire rope

For Welding Joints

a Rent of DG set per shift(With Diesel)

b Rent of Welding machine per shift(With Rods)

Rent for Grinder machine per shift (With Discs)

d Gas Cutting set per shift

Rent of Tools & Other Charges

a Rent of Chain pulley block & Tripod per shift

Rent of de-watering Ele. Pump (1.5 to 3 HP) per shift

Rent of de-watering pump with fuel (1.5 to 3 HP) per shift

d Rent for JCB Machine.

Providing & Supplying Hitachi Machine-110 capacity on rental basis in case of emergency

e situation and break down type ork & also during unavoidable condition as per

instruction of engg.incharge , rate ncludes all nece. shifting, fuel and operating charges .

(No payment should be allowed for non working condition of achinery ) (Based on central

work shop rate)

Barricading the entire break down or excavated area on rental basis usingwooden ballies /

M.S.angles at max. 2.00 meter entre to centre, C.G.I.Sheet, reflective paint / Board out side

to avoid accident & for smooth traffic diversion & movement including cautionary oard etc.

Item also includes formaking emporary sufficient nos of lighting rrangement through out

thework with ecessary required arrangement. ..The sameshall be removed after completion

of work. (Only for break down work from start to complete) (Based on Drainage SOR

Providing & Supplying hydra carne Machine of 12 tone capacity on rental basis in case of

emergency situation and break down type work & also during unavoidable condition

7 as per instruction of engg. incharge, rate includes all nece. shifting, fuel and operating

charges. (No payment should be allowed for non working condition of machinery) (Based on

central work shop rate).

i Transportation of machinery to or From site

Rent for Scaffolding by H frame incl. Khapeda (per pair per day)

k Electric Demolition Hammer (11-E) per shift

Cement grouting pump per shift(With Gasket)

Provdg. And fixing to wall, ceiling, & floor galvanised mild steel tubes (Medium grade)

Charges for Water connection by making hole in CI/DI/MS main line

Provdg. & fixing Gun metal check or non-return full wheel, ...50mm

For Masonry & RCC Work

Conveyance charge of earth, lime,murrum, building rubbish, manual garbage, sludge ,excavated

rock, fly ash, aggregate of any kind etc. comp. Up to 5.0 Km. lead (Based on Building SOR

TMT bar with cutting, bending, placing in position etc. comp.

c P/F dead shuttering for slab, beam etc.

Proding and Fixing F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers &Frames Cover :

100 mm thick circular cover, 35.00 MT load design, 100x2mm MS flat allround, 16mm ø

plain round bar for lifting the cover & should be fitted with plastic cups. Frame : 560 mm ø

clear opening, outer size- 888x888x175 mm. On the upper periphery of frame

25 x 3 mm wide MS flat should be well embed in concrete to protect the edges of frame.

FRC E.H.D.-35 manhole cover & frame described as above.

Rate also including Fixing M.H., Chamber or Catchpite Seat and Cover in line and level to

match exisisting road level in C.C.1:2:4 and finishing smooth, watering and protecting for

days etc. complete as directed.(Based on Drainage SOR 2015-16, Item No

carting and Fixing M.H., Chamber or Catchpite Seat and Cover in line and level to match

exisisting road level in C.C.1:2:4 and finishing smooth, watering and protecting for 7days etc.

complete as directed. M.H. seat cover will be supplied by A.M.C.(from any store) (Based on

Drainage SOR 2009-10)

Specification for Item

2. The jointing shall be done with molten lead and spun yarn, Pig lead shall be of

uniform quality, clean and free from foreign materials. It shall be of uniform softness

and capable of being easily caulked or driven. It shall conform to IS :782. Spun yarn

shall be of clean hemp and of good quality. It shall conform to IS :

4. M-seal 100 gm. Pack – company pack & use after showing AMC staff

5. Cement- as per Building Specifications of R & B.

6. Kapchi, Grit- as per Building Specifications of R & B.

7. Sand- as per Building Specifications of R & B.

8. For civil work apply General Technical Specifications for Building works, in S.O.R.

& G.C.C. at egovamc. Com.

9. Contractor will have to carry out all type of work suggested by the department.

Seal and Signature of the Bidder Addl. City Engineer

Date: Ahmedabad Municipal Corporation

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL CONDITION

As per City Engineer’s circular no.-6/2011-12 Dt.24.6.2011 all terms & conditions

will be applied.

Seal and Signature of the Bidder Addl. City Engineer

Date: (CENTRAL Zone)