Building

Memorandum showing items of works to be carried out

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful Rupees One Hundred TwentyTwo

materials and disposing off the excavated stuff Paise NinetyNine Only

upto any lead and lift.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to

3.0 m including sorting out and stacking of useful

Rupees Two Hundred SeventyTwo

2 04B001B 212.00 materials and disposing off the excavated stuff Cmt 272.57

Paise FiftySeven Only

uptoany lead and lift (B) Dense or Hard soil.

Filling available excavated earth (excluding rock)

in trenches. plinth, sides of foundations etc. in

Rupees One Hundred ThirtySix

3 4006 514.00 layers not exceeding 20 cm. in depth Cmt 136.92

Paise NinetyTwo Only

consolidating each disposited layer by ramming

Filling in plinth with sand under floors including

Rupees Four Hundred EightyOne

4 4007A 12.00 watering ramming, consolidating and dressing Cmt 481.8

Paise Eighty Only

complete (upto 10 ton)

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness Rupees Two Hundred NinetyFour

including watering, ramming and consolidating Paise ThirtyEight Only

etc. complete. (upto 10 ton)

Providing and laying cement concrete 1:4:8 (1-

Cement : 4- Coarse sand : 8- Graded Brick bats Rupees Two Thousand Seven

6 5004A 76.00 aggregate 40mm normal size) and curing Cmt 2769.69 Hundred SixtyNine Paise SixtyNine

complete excluding cost of formwork in (A) Only

Foundation and Plinth (upto 10 ton)

Providing throating or plaster drip and moulding Rupees FourtyThree Paise Eight

to R.C.C. Chhajja. Only

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing TMT Bar FE 500 reinforcement for

R.C.C. work including bending, binding and Rupees SeventySeven Paise

placing in position complete upto floor two level TwentyNine Only

Providing & laying controlled cement concreteM-

250 with curing etc. complete incl. the cost of Rupees Four Thousand Eight

9a 26.25 form work but excluding the cost of reinforcement Cmt 4867.19 Hundred SixtySeven Paise

for R.C.C. work Nineteen Only

(1) footings, up to plinth etc.

Providing & laying controlled cement concreteM-

250 with curing etc. complete incl. the cost of Rupees Seven Thousand Two

9b 6.07 form work but excluding the cost of reinforcement Cmt 7225.54 Hundred TwentyFive Paise

for R.C.C. work FiftyFour Only

R.A (1) columns up to plinth etc.

Providing & laying controlled cement concreteM-

250 with curing etc. complete incl. the cost of Rupees Six Thousand Four

9c 9.67 form work but excluding the cost of reinforcement Cmt 6453.9 Hundred FiftyThree Paise Ninety

for R.C.C. work Only

(1) Plinth beams, up to plinth etc.

Providing and laying controlled cement concrete

M.20 for curing complete including cost of Rupees Six Thousand One

9d 20.20 formwork and reinforcement for reinforced Cmt 6152.92 Hundred FiftyTwo Paise NinetyTwo

concrete work in Plinth Coping & Gred Slab Only

Providing & laying controlled cement concrete M-

200 with curing etc. complete incl. the cost of

Rupees Seven Thousand Nine

form work but excluding the cost of rainrorcement

10a 6.75 Cmt 7966.88 Hundred SixtySix Paise

for R.C.C. work at any height and level for

EightyEight Only

Ground Floor (1) M-200 for Column

(2) M-200 for Lintel beam Rupees Six Thousand Five

Hundred Four Paise Fourty Only

(3) M-200 for Chhaja Rupees Six Thousand Five

Hundred Four Paise Fourty Only

(4) M-200 For Beam Rupees Six Thousand Five

2 Hundred Four Paise Fourty Only

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

(5) M-200 for Slab Rupees Eight Thousand Two

10d 19.52 Cmt 8294.12 Hundred NinetyFour Paise Twelve

(6) M-200 for Stair Case. Rupees Six Thousand Nine

10e 2.64 Cmt 6999.3 Hundred NinetyNine Paise Thirty

Providing TMT Bar FE 500 reinforcement for

05014C + R.C.C. work including bending, binding and Rupees SeventyEight Paise

5016A placing in position complete upto floor two level ThirtyFour Only

Provdg & laying controlled cementconcrete M-

200 work.with curingetc. complete incl. the cost of

form workbut excluding the cost of Rupees Eight Thousand NinetyTwo

reinforcementfor R.C.C. work in Paise Twelve Only

:lintal,chajja,beam,column,stair For First Floor.(1)

M-200 for Column

(2) M-200 for Lintel beam Rupees Six Thousand Five

12b 4.60 Cmt 6545.81 Hundred FourtyFive Paise

(3) M-200 for Chhaja Rupees Six Thousand Five

R.A 2.60 Cmt 6545.81 Hundred FourtyFive Paise

(4) M-200 For Beam Rupees Six Thousand Five

12c 12.00 Cmt 6545.81 Hundred FourtyFive Paise

(5) M-200 for Slab Rupees Eight Thousand Three

12d 12.20 Cmt 8335.53 Hundred ThirtyFive Paise

FiftyThree Only

(6) M-200 for Stair Case. Rupees Seven Thousand

12e 2.80 Cmt 7093.23 NinetyThree Paise TwentyThree

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Provdg & laying controlled cementconcrete M-

200 work.with curingetc. complete incl. the cost of

Rupees Eight Thousand Three

form workbut excluding the cost of

13 R.A 3.40 Cmt 8376.94 Hundred SeventySix Paise

reinforcementfor R.C.C. work in

NinetyFour Only

:lintal,chajja,beam,column,stair M-200 for Slab

for Second Floor.

Providing TMT Bar FE 500 reinforcement for

R.C.C. work including bending, binding and Rupees SeventyNine Paise

placing in position complete upto floor two level ThirtyNine Only

Brick work using common burnt clay building

bricks having crushing strength not less than 35 Rupees Four Thousand Two

15 06002BA 91.60 kg./Sq.Cm. in foundation and plinth in Cement Cmt 4214.33 Hundred Fourteen Paise

Mortar 1:6 (1-Cement : 6 -fine sand)(B) ThirtyThree Only

Conventional (upto 10 ton)

Brick work using common burnt clay conventional

building bricks for super structure having crushing

strength not less than 35 Kg./Sq.Cm. in cement Rupees Four Thousand Four

16 86.00 mortar 1:6 (1 cement : 6 fine sand) in super Cmt 4495.98 Hundred NinetyFive Paise

structure above plinth level upto floor two level NinetyEight Only

(conventional ) (A) Ground Floor

Brick work using common burnt clay conventional

building bricks for super structure having crushing

strength not less than 35 Kg./Sq.Cm. in cement Rupees Four Thousand Five

mortar 1:6 (1 cement : 6 fine sand) in super Hundred ThirtyEight Paise Ten Only

structure above plinth level upto floor two level

(conventional ) (A) First floor

Brick work using common burnt clay building

bricks having crushing strength not less than 35 Rupees Four Thousand Five

18 24.00 kg./Sq.Cm. in foundation and plinth in Cement Cmt 4580.22 Hundred Eighty Paise TwentyTwo

Mortar 1:6 (1- Cement : 6 -fine sand)(B) Only

Conventional (upto 10 ton)S.F

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Half brick masonary in common burnt clay

conventional building bricks having crushing

06008A2A strength not less than 35 Kg./Sq.Cm. in cement Rupees Six Hundred EightyFour

+06010B mortar 1:4 (1 Cement : 4 coarse sand) in super Paise Nineteen Only

structure above plinth level upto floor two level

(conventional ) (A) Ground Floor

(i) Half brick masonry in common brunt clay

06008A2A building bricks having crushing strength not less

Rupees Six Hundred Ninety Paise

20 +06010B+0 58.00 than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Smt 690.5

6011B Cement : 4 - coarse sand ) in F.F (B)

Conventional (upto 10 ton)

Providing and fixing M.S. grills of required pattern

to wooden frames of windows etc. with M.S. flats

at required spacings and frame alround, square Rupees One Hundred Six Paise

or round bars with round headed bolts and nuts TwentyNine Only

or by screws (A) Plain Grill. (upto 10 ton)

Painting two coats (excluding priming coat) on

new steel and other metal surface with enamel

paint, brushing, interior to give an even shade Rupees NinetyTwo Paise

including cleaning the surface an even shade Seventeen Only

including cleanicn the surface of all dirt, dust and

other foreign matter.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and fixing in position Alluminium

single shutter door with 50 micron color

alluminium anodized hollow section of

approved shade fabricated from alluminium

Standered sections for outer leg frame

size 63.50x49.50x2.65(of app.wt 1.657kg / rmt )

and Shutter handle vertical rail size

47.50x44.50x2.40mm (of wt 1.281 kg/rmt) and

Shutter hinges vertical and door top rail size

47.62x44.50x2mm (of wt 1.519 kg/rmt) and

Shutter Bottom rail size 114.30x44.45x2.15 (of

Rupees Two Thousand Nine

app.wt-1.824/kg/rmt) and shutter Lock/middle

23 R.A 14.00 Smt 2976.47 Hundred SeventySix Paise

rail size 100.00xmmx44.45mmx2mm thick (of

FourtySeven Only

app. wt-1.603 kg/rmt) and glazing chips

size19x17.30x0.90 (wt-0.124 kg/rmt) around

the sheet paneled allover including providing

and fixing heavy handle havy

lock,bracket,stoppers,wool pine ubber for air

tightness and providing and fixing 6mm thick

compacted sheet of app.shade at bottom and

at top portion including all requared material

and labour as per detail drawing as directed. (For

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and fixing window having three track

aluminum 50 micron Colour anodized section with

track vertical and top size 92x31.75x1.50 mm

Wt @ 1.06 kg / m and three track rain bottom

size 92x45.50x1.50mm Wt @ 1.659 kg / mt with

sliding shutters of handle member size

40x18x1.50mm [email protected] kg/mt and shutter

Rupees Two Thousand Eight

inter lock size 40x18x1.45 [email protected] kg/mt

24 RA 36.00 Smt 2860.32 Hundred Sixty Paise ThirtyTwo

and shutter bottom and top rail size

40x18x1.55 [email protected] kg/mt with 5mm thick

tinted colored shgc 0.30,U value 0.61 glass with

S.S.304 Mosquito net with EPDM glass Ruber

and all necessary fixtures and fastening and

transparent silicon sealant fixing to frame and as

instructed by engineer in-charge.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and fixing in position Alluminium

single shutter door with 50 micron color

alluminium anodized hollow section of

approved shade fabricated from alluminium

Standered sections for outer leg frame

size 63.50x49.50x2.65(of app.wt 1.657kg / rmt )

and Shutter handle vertical rail size

47.50x44.50x2.40mm (of wt 1.281 kg/rmt) and

Shutter hinges vertical and door top rail size

47.62x44.50x2mm (of wt 1.519 kg/rmt) and

Shutter Bottom rail size 114.30x44.45x2.15 (of

app.wt-1.824/kg/rmt) and shutter Lock/middle Rupees Two Thousand Nine

rail size 100.00xmmx44.45mmx2mm thick (of Hundred ThirtyFour Paise Five Only

app. wt-1.603 kg/rmt) and glazing chips

size19x17.30x0.90 (wt-0.124 kg/rmt) around

the sheet paneled allover including providing

and fixing heavy handle havy

lock,bracket,stoppers,wool pine ubber for air

tightness and providing and fixing 6mm thick

compacted sheet of app.shade at bottom and

5mm thick glass at top portion including all

requared material and labour as per detail

drawing as directed.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and fixing in position Alluminium

Double shutter door with 50 micron color

alluminium anodized hollow section of

approved shade fabricated from alluminium

Standered sections for outer leg frame

size 63.50x49.50x2.65(of app.wt 1.657kg / rmt )

and Shutter handle vertical rail size

47.50x44.50x2.40mm (of wt 1.281 kg/rmt) and

Shutter hinges vertical and door top rail size

47.62x44.50x2mm (of wt 1.519 kg/rmt) and

Shutter Bottom rail size 114.30x44.45x2.15 (of

app.wt-1.824/kg/rmt) and shutter Lock/middle Rupees Three Thousand FiftyFour

rail size 100.00xmmx44.45mmx2mm thick (of Paise TwentyFour Only

app. wt-1.603 kg/rmt) and glazing chips

size19x17.30x0.90 (wt-0.124 kg/rmt) around

the sheet paneled allover including providing

and fixing heavy handle havy

lock,bracket,stoppers,wool pine ubber for air

tightness and providing and fixing 6mm thick

compacted sheet of app.shade at bottom and

5mm thick glass at top portion including all

requared material and labour as per detail

drawing as directed.

Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

Rupees One Thousand One

1.2mm (JindaL Section :2434, @ Wt.

27 11030, 4.00 Smt 1175.56 Hundred SeventyFive Paise

Kg/mt) with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

Providing and laying Vitrified tiles 8 to 10 mm

thick , 24'' x 24'' in flooring treads of steps and Rupees One Thousand One

28 14012AA 178.00 landing laid on a bed of 12mm thick cement Smt 1120.36 Hundred Twenty Paise ThirtySix

mortar 1:3 (1-cement : 3-coarse sand ) finishing Only

with flush pointing in white cement.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and laying polished kota stone slab

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1- Rupees One Thousand One

29 14013A 52.00 Cement : 3 coarse sand) and jointed with gray Smt 1166.93 Hundred SixtySix Paise

cement slury mixed with pigment to match the NinetyThree Only

shade of slab including rubbing and polishing etc.

complete. (upto 10 ton)

Providing and laying broken chine mosaic flooring

for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3

to plain or slope and to be tempered to bring

mortar creme out upto surface using white

cement including rounding off junctions and

extending them upto 15 cm along the

Rupees One Thousand One

wall,clearing with water and oxalic acid etc. as

30 R.A 120.00 Smt 1104.94 Hundred Four Paise NinetyFour

directed. Including Average 75mm thick cement

concrete 1:2:4 (1-Cement : 2 coarse sand

stone aggregate 10 mm nominal size) with

finishing floting coat of neat cement complet.

including water proofing chemical as per

manufacturer recommendation with 10 years

guarantee of water proofing.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing, fixing and construction of sandwitch

type 25mm thick double polished Granite of

uniform size and colour for

Kitchen/Pantry/Counter/Laboratory sink, shelves

etc in floor, dado or fascia up to 1.8mt long

including necessary cement mortar bedding in

cement mortar 1:2 of required thickness. Kota Rupees Five Thousand Five

31 R.A 12.00 shall be fixed over 25mm thick rough kota stone Smt 5578.23 Hundred SeventyEight Paise

bottom, cement joints and pointing as specified TwentyThree Only

with necessary making of edges,Including vertical

kota support as per design, polishing, curing daily

moping with water, kerosene as directed for at

least 15 days or up to the satisfaction of Engineer-

Providing and fixing 25 mm thick pre polished on

both faces kota stone slab front edge machine

cut polished in shelves below platform, in store or

in cupboards at all floors and levels jointed with

Rupees Eight Hundred

32 R.A 14.00 gray cement slurry including making chases in Smt 878.7

SeventyEight Paise Seventy Only

wall and making good by filling with cement

mortar 1:3(1 Cement : 3 sand) completed as

directed by the Engineer in charge.

Providing and fixing 19mm thick water proof

plywood shutters with 1 mm thick approved

Formica / prelaminated sheet on both side for

cupboard cabinet on shutter with Teak wood Rupees Two Thousand Nine

33 R.A 20.00 frame of size 50 mm x 50 mm including Smt 2990.61 Hundred Ninety Paise SixtyOne

necessary S.S fixtures and fastening etc also Only

providing a coat of primer and two coat of oil

paint on teak wood frame & batten patti as

directed by Engineer-in-charge .

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Construction Septic tank inside dimension of

m in length, 2.00 m in width & 2.30 depth

including excavating any type of soil as shown

and mentioned in the drawing, providing and

laying 0.10 m thick plain cement concrete 1:2:4 (

1 cement : 2 coarse sand : 4 graded stone agg.)

40 mm thick IPS flooring at bottom with periphery

brick masonary 0.35 m thick walls and

intermediate wall 0.23 cm thick CM 1:5 (

Rupees Ninety Thousand Six

cement : 5 coarse sand ) & RCC Top slabs12

34 R.A 2.00 Nos 90669.72 Hundred SixtyNine Paise

cms thick in 1:2:4 (1 cement : 2 coarse sand :

SeventyTwo Only

graded stone agg) including form work &

reinforcement as per design and 15 mm thick

cement plaster in CM 1:4 with floating coat of

neat cement slurry. Also provide Two nos CI

Manhole frame and cover of size 60 cm x 45 cm

& PVC pipe 75 mm dia. 6 kgf / Sq cm pressure

for air vent pipe with cowl etc complete as per

direction of Engineer in charge.

Providing 15 mm thick Mala cement plaster in

single coat on fair side of brick / concrete wall for

17002 Rupees Two Hundred Fifteen

35 732.00 interior plastering upto floor two level & finished Smt 215.85

B+17004 Paise EightyFive Only

even and smooth : (ii) C M 1:4 ( 1 cement 4 sand)

(A) Ground Floor

Providing 15mm thick cement plaster in single

17002 coat on Rough (Similar)side of single or half brick

Rupees Two Hundred ThirtyNine

36 B+17004+1 374.00 walls for interior plastering upto floor two level Smt 239.79

Paise SeventyNine Only

7007A and finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand)F.F

Providing 15mm thick cement plaster in single

17002 coat on Rough (Similar)side of single or half brick

Rupees Two Hundred SixtyThree

37 B+17004+2 112.00 walls for interior plastering upto floor two level Smt 263.74

Paise SeventyFour Only

x17007A and finishe even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand)S.F

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing 10 mm thick Mala cement plaster on

ceiling and soffits of stairs upto floor two level, in Rupees Two Hundred Fifteen

cement mortar (1:3) (1 cement : 3 sand) & Paise Thirty Only

finished even and smooth : (A) Ground Floor

.17001 Providing 10 mm thick Mala cement plaster on

A+17004 ceiling and soffits of stairs upto floor two level, in Rupees Two Hundred ThirtyNine

A+17006+1 cement mortar (1:3) (1 cement : 3 sand) & Paise TwentyFive Only

7007A finished even and smooth : (A)First Floor

Providing 10 mm thick Mala cement plaster on

ceiling and soffits of stairs upto floor two level, in

A+17004 Rupees Two Hundred SixtyThree

40 20.00 cement mortar (1:3) (1 cement : 3 sand) & Smt 263.2

A+17006+2 Paise Twenty Only

finished even and smooth : (A)Second Floor

20mm thick gutka finish sand faced cement

plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing Rupees Three Hundred

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm TwentyOne Paise Ten Only

thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Applying two coats of Birla or Asian (or

equivalent) acrylic lapy ( putty) & two coats of

primer of approved brand and manufacture on

42 19032.00 1092.00 new wall surface to give an even shade including Smt 40.59 Rupees Fourty Paise FiftyNine Only

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand

papered smooth.

Distempeing (Two coats) with oil bound washable

distemper of approved brand and manufacture

and of required shade on wall surfaces to give an

even shade, over and including a priming coat

Rupees SeventyFive Paise

43 18022.00 1092.00 with alkali resistance primer of approved brand Smt 75.43

FourtyThree Only

after thoroughly brushing the surface and other

foreign matter and also including preparing the

surface even and sand parpered smooth.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Finishing walls with 100% Premium acrylic

emulsion paint having VOC less than 50 gm/litre

and UV resistance as per IS 15489:2004, Alkali &

fungal resistance, dirt resistance exterior paint of

required shade (Company Depot Tinted) with

silicon additives. New work (Two or more coats Rupees One Hundred FiftySeven

applied @ 1.43 litre/ 10sqm. Over and including Paise FiftyFive Only

priming coat of exterior primer applied @

litre/10 sqm, Item Includes two coat of primar and

putty with scafolding at all level of work. As per

Approval of Engineer Incharge.

Providing and laying marble stone ( Keshariyaji

Green / any Colour ) slab flooring / Staircase

Trade & Riser , Window sill, door threshold, door

sill , Jams etc over 20 mm. (average) base of

Rupees One Thousand Four

cement mortar 1:6 (1 cement : 6 coarse sand) or

45 R.A 84.00 Smt 1452.38 Hundred FiftyTwo Paise ThirtyEight

L.M. 1:1.5 and jointed with grey cement slurry

matchj with stone using ingradiant colour

including rubbing,edge Rounding and polishing

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution

for termite control treatment including labour and

material consistment with I.S.I specification.

Using Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret- II Consentration Weight one percent Rupees EightySix Paise EightyTwo

is recommended i.e one litre 20 EC chemical Only

emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be

Rupees SeventyTwo Paise

47 23061.00 60.00 fixed on the wall with the help of clamp at every Rmt 72.65

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing

of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be

Rupees NinetyOne Paise

48 23062.00 62.10 fixed on the wall with the help of clamp at every Rmt 91.84

EightyFour Only

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing

of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every Rupees One Hundred FourtyEight

two metre C/C or shall be concelled as directed Paise Twelve Only

including necessary fittings etc. including testing

of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing, laying and jointing in true line and level

100 diametre 6kg/cm2 P.V.C conforming to IS

13592- 1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 100 mm Rupees Five Hundred

diametre x 149 mm length x 145 mm TwentyThree Paise Eighteen Only

heigh at every 2000 mm center to center or shall

be concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all

Providing, laying and jointing in true line and level

160 diametre 6kg/cm2 P.V.C conforming to IS

13592- 1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 100 mm Rupees Eight Hundred ThirtyFour

diametre x 149 mm length x 145 mm Paise ThirtyEight Only

heigh at every 2000 mm center to center or shall

be concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all

Providing and fixing in position cowel went to Rupees Five Hundred Five Paise

pipes.(C) 100mm dia Seventeen Only

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing Rupees Five Hundred EightySix

design with C.I scread down or hinged grating Paise Sixty Only

including the cost of cutting and making good the

Providing and fixing water closet Squatting pan

(Indian type W.C. pan) size 580 mm (earthwork,

bed concrete, foot rests and trap to be measured

and paid for separately) (A) Vitreous china - (i)

Long pattern-white colour with 100 mm size “P” or

“S” trap for water closet squatting pan including Rupees One Thousand Four

54 2.00 jointing the trap with the pan and soil in cement Nos 1434.8 Hundred ThirtyFour Paise Eighty

mortar 1 :1 (1 cement : 1fine sand) including in Only

cement mortar 1 : 3 (1 cement : 3 coarse sand) a

pair of white vitreous china 250 mm x 130 mm x

30mm foot rest for long pattern squatting pan

Providing and fixing Wash basin with single hole

for pillar tape with C.I. or M.S. brackets painted

white including cutting holes and making good the

same but excluding fittings. (A) vitreous china :

(ii) Flat back washbasin 550 mm x 400 mm size

23018+230 (i) IN white colour including Providing and fixing

20A+23029 32mm Dia. C.P. Brass waste for washbasin or Rupees Two Thousand Two

55 A+23030A 6.00 sink and 32mm Dia. M. I. Fisher union for Nos 2233.79 Hundred ThirtyThree Paise

+23021A+ washbasin or sink with Providing and fixing pillar SeventyNine Only

M602 tap, capstan head, screw down high pressure

with screws shanks and back nuts.(A) 15 mm.

dia.Including Providing and fixing 15 mm Dia.

screw down stop tap and 32 mm dia Waste Pipe

for Wash Basin C.P.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and fixing kitchen sink with C.I. or M.S.

Brackets, painted white including cutting holes in

walls and making good the same but excluding

fitting (C) Vitreous china sink (i) 600 mm x

450mm x 150 mm size including Providing and Rupees Two Thousand Five

fixing 40mm Dia. C.P. Brass waste for washbasin Hundred Five Paise Thirteen Only

or sink and 40mm Dia. M. I. Fisher union for

washbasin or sink.(HINDWARE, SONA, CERA

brand of approved quality)

Providing and fixing 600mm x 450mm bevelled

edge mirrror of superior glass mounted on 6mm

Rupees Eight Hundred FiftyNine

57 23024.00 6.00 thick A.C. sheet or plywood sheet and fixing to Nos 859.41

Paise FourtyOne Only

wooden pluge with C.P. brass screws and

Providing and fixing C.P. brass towel rail comlete

with C.P. brass brackets fixed to wooden plugs Rupees Six Hundred Sixteen Paise

with C.P.brass scews.(B) 600mm x 20mm size. FourtyTwo Only

Providing and fixing screw down bib taps of

Rupees One Hundred EightySix

59 23028B1 12.00 following size.(B) Brass chromium plated screws Nos 186.83

Paise EightyThree Only

down Bib Tap. (i) 15mm dia.

Providing and fixing Gun metal check or non- Rupees Six Hundred SixtyThree

return fullway wheel valve.(E) 40mm dia. Paise FourtyThree Only

Providing erecting and fixing double coated

Syntex PVC. (ISI) water tank of required capacity Rupees Three Paise NinetyFive

each with all necessary fittings and connection Only

etc. complete on terrace.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and fixing pre-cast Rubber Dye / steel

inter locking concrete block 60mm thick with

concrete M300 pnumatic compressed / vibrated

Rupees Seven Hundred Six Paise

62 14033.00 67.50 mechanically and as per approved design Smt 706.93

NinetyThree Only

Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with

sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight Rupees One Thousand Two

63 24006B 10.00 C.I. cover with frame of 300mm x 300mm size Nos 1246.92 Hundred FourtySix Paise

(inside) with standard weight.(i) Square mouth NinetyTwo Only

traps.(B) 150mm x 100mm size P or R type

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends

with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- Rupees Three Thousand Six

64 24016BA 8.00 cement :2- coarse sand :4-graded stone Nos 3660.76 Hundred Sixty Paise SeventySix

aggregate 20mm size) foundation concrete Only

1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x

mm and 450mm deep for pipe line with one or

two inlets. (upto 10 ton)

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and fixing coloured wash down water

closet (European type WC pan) with integral 'P' or

'S' trape with soil pipe in cement mortar 1:1 (1

Rupees One Thousand Six

23010+230 cement : 1 fine sand) with coloured plastic seat

65 2.00 Nos 1648.15 Hundred FourtyEight Paise Fifteen

17 cover with CP brass hinges and ruber buffers

including cutting holes in wall and making good

the same etc complete.

Constructing a soak pit of 2.50 m in out side

diametre & 6.00 m deep of excavation any type

soil with 0.23 m thick honey comb brick masonary

wall 5.50 m from bottom & 0.50 m solid at top in

cement mortar 1:6 ( 1 cement: 6 Sand) based on

Rupees Fourty Thousand Eight

0.10 cm thick CC 1:4:8 (1 cement : 4 coarse

66 RA 2.00 Nos 40846.42 Hundred FourtySix Paise

sand : 8 hand broken stone aggregate 40mm

nominal size) & R.C.C. top slab 0.12 m thick in

CC 1:2:4 including cost of form work &

reinforcement as per detail drawings or as

directed by Engineer -in-charge.

Clearing and grubbing road land including

uprooting rank vegetation grass

Rupees EightyFour Thousand Two

bushes,shrubs,sapling and trees girth up to

67 26117A 0.06 Hect. 84256.67 Hundred FiftySix Paise SixtySeven

mm removal of stumps of trees cut earlier and

disposal of unserviceable materials(A) By manual

means in area of light jungle

Providing and fixing chromium plated brass half

trun flush cock of approved quality including fixing Rupees Two Hundred SixtyThree

in pipe line etc. complete.(ii) 25mm dia. Paise SeventySeven Only

Providing and laying white glazed tiles size

12"x12" and 6mm thick in flooring treads of steps

and landing laid on a bed of 12mm thick cement Rupees Nine Hundred Fifty Paise

mortar 1:3 (1-cement : 3-coarse sand ) finishing FiftyThree Only

with flush pointing in white cement. (upto 10 ton)

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and laying white glazed tiles size

12"x18" and 6mm thick inskrting risers of steps

Rupees Nine Hundred EightyTwo

70 14009AA 172.00 and dedo on 10mm thick cement plaster 1:3 (1- Smt 982.03

Paise Three Only

cement : 3-coarse sand) and jointed with white

cement slurry (upto 10 ton)

Providing and fixing (600 x 450 x 200 mm) size

viterous china laboratory sink with CI or MS

brackets painted white including cutting holes in Rupees Two Thousand Fourty

walls and making good the same including Paise Twenty Only

providing and fixing 40mm dia CP waste couplin

rails providing fixing PV

Providing and laying cement concrete flooring

1:2:4 (1- cement : 2-coarse sand : 4-graded stone

Rupees Three Hundred FiftyTwo

72 14015BA 34.00 aggregate 20mm nominal size) laid in one layer Smt 352.01

and finished with a floating coat of neat cement.

(B) 50mm thick. (upto 10 ton)

Providing and laying 12" x 12" Ceramic 10mm

thick tile flooring of any colour and design over

20mm (average ) base of cement mortar 1:6 (

cement : 6 coarse sand ) and jointed with colour

73 RA 28.00 Smt 808 Rupees Eight Hundred Eight Only

cement slurry including finished with flush

pointing and cleaning the surface etc. compl For

ramp, Otta etc whereever applicable.

Earthwork for embankment including breaking

clods, dressing with all lead and lift (excluding Rupees One Hundred SixtyNine

watering and consolidation)(B) From Borrow area Paise TwentyEight Only

For any lead and lift.

Providing and fixing 25mm thick both side polish

kota stone Rain Water Spout in including fixing in Rupees One Thousand One

position front edge machine cut polishing etc. Hundred Seventeen Paise Six Only

Providing cement vata (10cm. x 10 cm. size)

Rupees TwentyFour Paise

76 17015.00 174.00 quarter round in cement mortar 1:1 including neat Rmt 24.28

TwentyEight Only

cement finishing, watering etc. complete.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Steel work welded in built up sections framed

work including cutting hoisting fixing in postion

and applying a priming coat of red lead paint (A) Rupees Nine Thousand One

77 11002AA 2.00 In beams and joists channels and angles, Quintel 9108.48 Hundred Eight Paise FourtyEight

tees,flats with connecting cleats as in main and Only

cross beams,hip and jack rafters connected to

common rafters and the like.

Providing and fixing brass cromium plated

Surgical handle cock ( Cabtree, Essco, Ess-Ess, Rupees Eight Hundred FiftyNine

Plumber of approved quality) of size of 15 mm Paise FiftyOne Only

dia etc. complete

Providing and fixing pre-cast concrete kerb stone

of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M200

Rupees Four Hundred Four Paise

79 14023A 60.00 grade concret as per approved design and Rmt 404.05

including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

Providing & construction Tree plants required

Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with

goodearth with mixing of cow dong and Rupees One Hundred ThirtySix

pesticide.planting the following plant of 4' to 6' Paise ThirtyFive Only

height stack it well, maintain it for 3 month name

of plants Conocarpus, Neem Etc...

Painting with weatherproof exterior emulsion

acrylic based paint the pattern using the grid and

dimensions for door and window given as per the

defined shade code by experienced applicator of

Rupees Three Hundred Eighty

81 M.R 66.50 standard drawing and design according to the Rmt 380.77

Paise SeventySeven Only

reference manual of Facade Branding for Health

& Wellness Centres of Ayushman Bharat

Scheme as per the direction of the Engineer in

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Painting the illustration circle of Diameter 44 inch

with weather proof exterior emulsion acrylic

based paint as per defined shade code by

Rupees Two Thousand One

experienced applicator of standard drawing and

82 M.R 12.00 Nos 2181.6 Hundred EightyOne Paise Sixty

design according to the reference manual of

Facade Branding for Health & Wellness Centres

of Ayushman Bharat Scheme as per the direction

of the Engineer in Charge.

Painting with weatherproof exterior emulsion

acrylic based paint the National Urban Health

Mission Logo and Ayushman Bharat Logo type

using the grid and dimension given as per defined

shade code by experienced applicator of Rupees Seven Thousand Six

standard drawing and design according to the Hundred EightySix Paise Ten Only

reference manual of Facade Branding for Health

& Wellness Centres of Ayushman Bharat

Scheme as per the direction of the Engineer in

Demolition and dismentling work

Credit for buy back of

serviceable/usable dismantled doors, windows,

roof item etc. these material are to be removed

from site by the agency immediately after

demolition work completed of (1) SC Valiyampura

Old Building (Upset Value RS 9,050.00) as

84 Credit Items -1.00 directed by Engineer in charge. Total Minimum up job 9050 Rupees Nine Thousand Fifty Only -9050.00

set value for this item is Rs9,050.00 (upset value

of the salvaged items of Rs 9,050.00 the credit

value to be quoted shall not be less than the

upset value mentioned above the quoted amount

shall be deducted from the Contractor's First R.A

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing & laying controlled cement concrete M-

200 work with curing etc. complete including the Rupees Five Thousand One

85 RA 14.00 cost of form work but excluding the cost of Cmt 5120.7 Hundred Twenty Paise Seventy

reinforcement for R.C.C. work in Road work With Only

Trimix Machine.

Providing & Supplying office table of the following

specifications Its size shall be 1500 Width x

Depth x 740 Height . The top shall be made from

25 mm thick prelaminated board . All the edges

are sealed with 2 mm thick PVC edge band all

around . Side panels shall be made from 25 mm

thick pre- laminated paticle board . All the edges

are sealed with 2 mm thick PVC edge band on

the user side and 0.8 mm on the top and bottom

side .The side panels have 2 glide screws each

Green for levelling of the desk. Modesty panel shall be

Enterprise/ made from 18 mm thick pre- laminated particle

Ref board . All the edges are sealed with 0.8 mm

Rupees Seven Thousand Eight

86 PIU/AC/Furn 2.00 thick PVC edge band all around. Freestanding No. 7878

Hundred SeventyEight Only

Pedestal shall be made from 18 mm pre-

025 Item laminated particle board with a combination of

No 110 mm and 0.8 mm PVC edge band on all the

exposed surfaces as per requirement . The

are provided with suitable slides for smooth

operation . All the pedestal drawers are centrally

locked with a single key .Drawer slides are of

Hettich.The rate shall include all materials,

hardware, and labour etc. complete as per

instruction of engineer-in charge.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing & Supplying High Back Chair.

SEAT/BACK A SSEMBLY: The seat is made

up of 1.2 ± 0.1cm thk. hot pressed plywood

measured.The Back is made up of injection

mou1ded glass filled nylon & upholstered

using Mesh fabric with high tenacity yarn.

* SEAT SIZE : 47.0 cm. (W) x 51.5 cm (D)*

BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H)

Green HIGH RESILIENCE (HR) POLYURETHANE

FOAM: The HR polyurethane seat foam is

Ref Rupees Twelve Thousand Two

moulded with density 45+/-2 kg/m° and

87 PIU/AC/Furn 2.00 No. 12292.71 Hundred NinetyTwo Paise

iture/1612/2 hardness 16 ± 2 kgf as per IS:7888 for 25%

SeventyOne Only

025 Item compression.ARMRESTS : The adjustable

No 125 armrest is designed with the following

features : • Up-Down adjustment- 8 steps (8

0±0.Scm range)• Height adjustable armrest

structure which is Powder Coated & fitted

with an armrest top. • Fixed Armrest Top is

PU moulded over metal insert.LUMBAR

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and Supplyin .Mid Back Chair.

SEAT/BACK A SSEMBLY: The seat is made up

of 1.2 ± 0.1cm thk. hot pressed plywood

measured.The Back is made up of injection

mou1ded glass filled nylon and upholstered

using Mesh fabric with high tenacity yarn.* SEAT

SIZE : 47.0 cm. (W) x 51.5 cm (D).* BACK SIZE :

45.0 cm. (W) x 65.3 cm. (H)HIGH RESILIENCE

(HR) POLYURETHANE FOAM: The HR

polyurethane seat foam is moulded with density

Green 45+/-2 kg/m° and hardness 16 ± 2 kgf as per

Enterprise/ IS:7888 for 25 Percent compression.ARMRESTS

Ref : The adjustable armrest is designed with the Rupees Eleven Thousand Three

88 PIU/AC/Furn 4.00 following features : No. 11348.36 Hundred FourtyEight Paise

iture/1612/2 • Up-Down adjustment- 8 steps (8 0±0.Scm ThirtySix Only

025 Item range)• Height adjustable armrest structure which

No 126 is Powder Coated and fitted with an armrest top.

• Fixed Armrest Top is PU moulded over metal

insert.LUMBAR SUPPORT ASSEMBLY: The

Lumbar support consists of polypropylene pad

with moulded polyurethane foam and covered

with polyester fabric.The Height of Lumbar pad

can be adjusted through two projecting knobs

provided on the rear side of the pa6. Lumbar pad

has an adjustment of 8.0 ± 0.5 cm in

height.FRONT PIVOT SYNCHRO MECHANISM:

The adjustable tilting mechanism is designedwith

the following features.• 360° revolving type.•

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing & Supplying of Storwel with

Greenguard, Indoor Advantage Gold, GreenPro

etc. & should be mandatorily submitted along with

Bid.Storwel plain shall have an overall size of

916mm(W)x486mm(D)x1981mm(H) with welded

construction. It should have the shelf thickness of

0.7 mm, Back thickness of 0.8mm, Door

thickness of 0.8mm (high yield strength) and all

other components shall have a thickness of

0.9mm. These components shall be made of

CRCA ‘D’ grade high yield strength as per IS:513.

The Storwel Plain should have a Mazak handle

Bhavana/ and Three way locking mechanism with Shooting Rupees Fourteen Thousand Five

Item No 33 Bolts. It should have a height wise adjustable Hundred FourtyFour Only

shelf mounting which shall have a Uniformly

Distributed Load Capacity of max 40 Kg. It should

also have a M10 Screw type Leveller with Hex

plastic base. The finishing shall include Epoxy

powder coated to the thickness of 50 microns (+/-

10). Plenty of colour options and shelving options

shall be available.The rate shall include all

materials, hardware, and labour etc. complete as

per instruction of engineer-in charge.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing & Supplying of round stool should have

of round stool. Overall dimension should be

Diagonal Leg Dia 538 mm H470 min-655max.

Top plate made of SS 304 made sheet with spin

section of thickness 1mm & non corrosive. It has

a diameter of 305mm, seat base made of MS

ring and rectangular tube. EN8 Screw having dia

of 22 mm is used for height adjustment of the

seat base. The round hub made of MS ERW

tube having dia of 38mm and thickness 2 mm.

The Hub is welded with the legs and it

Bhavana/ accommodate and cover the lead screw Rupees One Thousand Five

Item No 9 mechanism. The under-structure consist of 4 Hundred SixtyFive Paise Fifty Only

legs made up of MS ERW tube of diameter

mm and 1.6mm thick. The press formed pipe leg

give a round & clean look. All the legs is Provided

with 4 nos of Nylon-6 bush. All metal components

are pre treated with zinc phosphating in 7 tank

process and then powder coated with epoxy

polyester powder coating . Safe working load is

135kg .The rate shall include all materials,

hardware, and labour etc. complete as per

instruction of engineer-in charge.

supplying and fixing s.s 304 laboratory stool

Green for hospital used PSP-1037-SS Stool 14"

Square stainless steel 18 gauge contoured

seat Stainless steel base with heel rest for Rupees Nine Hundred TwentyNine

91 PIU/AC/Furn 4.00 No. 929.2

added comfort Tubular legs fitted with Paise Twenty Only

025 Item rubber shoes pretreated and power coated.

No 10 As directed by Engineer in charge etc

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing & Supplying of Examination couch with

full storage of Examination couch with full storage-

O overall dimension of L 2065 X W 850 X H

mm. The backrest has ratchet mechanism for

tilting the backrest. Leg frames & intermediate

frames should be made of ERW tubes having

section of 30 x 30 square tubes with thickness of

1.6mm. Nylon 6 leg shoes is given to avoid wear

& tear. MS sheet metal lying surface of thickness

1.2mm is used. Top sheet metal panel base

Wesource/ frame of 25 x 25 ERW square tubes of

Ref thickness 1.6mm is used. Ratchet is made of MS

PIU/AC/Furn Strip with section 40 x 4 to Provision the backrest Rupees TwentySix Thousand Eight

iture/1608/2 tilt. The table is Provided with Leathrite calf rest Hundred SixtySix Only

025 Item which is adjusted on ss304 made lithotomy rod.

No 08 The Rod and the calf rest is ht adjustable and

swivel to achieve desired position. The table is

Provided with SS bowl stand to collect fluids and

discharge during procedure. Table is pre-treated

and powder coated with epoxy powder coating.

Safe working load is 135kg. The rate shall include

all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Ward Care Bed Delux (Plain Bed) (I.C. 7500)

(1900mmL X 91OmmW X 61OmmH .) Providing

Green & Supplying a Ward Care Bed Frame work of

Enterprise/ specially designed CRC

Ref rectangular heavy tube. machine pressed CRC

Rupees Four Thousand Five

93 PIU/AC/Furn 4.00 sheet top with proper support. SS head & foot No. 4545

Hundred FourtyFive Only

bows with laminated panels. Four side saline

025 Item arrangement location L.eg fitted

No 13 with shoes. Pretreated & Powder coated.

Selection as per Engineer-In-Charge etc.

completed. ( As per Photo attached)

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and Supplying hospital locker. The

bedside locker has single drawer and cabinet

with lock and with plastic molded handle. There is

space between plastic top and the cabinet to

keep the general items for the frequent use.

Cabinet is Provisionided with lock to keep the

valuable items for the safety. overall dimensions

should be 490mmW x 410mm D x 941mm

H.Corner tube made of ERW round tube with

section 25.4 mm dia of 1.2 mm thickness.Cabinet

made of CRCA sheet of 0.8 mm thick Provided

Wesource/ with lock.( 470 mm x 410 mm x 382 mm).Top

Ref made of ABS of 2.2 mm thick. Top has recessed

and contoured shape for better aesthetic and Rupees Twelve Thousand Twenty

usability.Plastic molded knob is Provisionided Paise One Only

with Matt finish and dome shaped for better

grip.Plastic molded castors with 50 mm dia

placed in diagonal locking arrangement.RAL

white, plastic parts in Grey.5 kg UDL on both the

tops and 10 kg in the cabinet.All metal

components are pre treated with zinc

phosphating in 7 tank process and then powder

coated with anti microbial epoxy polyester

powder coating to fulfill the requirements for

bacterial protection against at least 2 commonly

found bacteria in Hospital environment [Gram

positive and Gram Negative].goods are supplied

in knocked down construction to reduce carbon

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and Placing Single Bed Mattress

,pillow,bedsheet with pillow cover ,with 12mm

thick prelam mdf back‐ 900x1950x100mm ‐

Green goldline plus pu form 40 density 300 gsm cottan

satin quilt cover.Mattress back putti made of

Ref Rupees Nine Thousand Six

12mm thick prelam mdf bothside white

95 PIU/AC/Furn 4.00 No. 9653.58 Hundred FiftyThree Paise

finish.Kurlon dew pillow 600x400 Fill: Polyester

FiftyEight Only

025 Item Fibre Quality of shell fabric: 110 GSM cotton satin

No 105 patti Outer Shell Layer: Cotton Fill Weight (in

gms): 650.Bedsheet with pillow 100 Percent

cotton of bombay dyeing or eq.

Green Providing and fixing curtain (Cotton fabrics of rate

Enterprise/ of Rs. 400 per sqmtr + support cotton cloth) with

Ref Aluminum rod of dia 40 to 50mm dia with SS rings Rupees One Thousand SixtyThree

96 PIU/AC/Furn 24.00 sqmt 1063.53

Paise FiftyThree Only

Green Supplying of Dust bin of approved brand Sintex or

Enterprise/ equivalent (as per photographs) of 100 Liter

Ref Capacity Rupees One Thousand Five

97 PIU/AC/Furn 4.00 No. 1575.6 Hundred SeventyFive Paise Sixty

iture/1612/2 Only

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and Supplying of IV pole of saline

stand. Overall dimension should be 250 mm PCD

with height adjustable from 743 mm to 1150 mm.

it is fully SS made used on bed with telescopic

rod for height adjustment. The bottom adapted is

12 mm dia, fixed tube is 15.9 mm dia , 1.6 mm Rupees Four Thousand Four

98 4.00 thick ERW Tube. Telescopic rod is 12 mm dia No. 4479.35 Hundred SeventyNine Paise

025 Item ERW tube. there are 2 nos 6 mm dia hooks to ThirtyFive Only

No 05 hand saline bags. Maximum load bearing

capacity is 2kg per hook.The rate shall include all

materials, hardware, and labour etc. complete as

per instruction of engineer-in charge.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and supplying of Examination couch

with full storage of examination couch overall

dimension 1975 mm (L)x560 mm (w)x805 mm

(H).Examination couch with three drawers with

three cabinates in built step stool and BP tray

holder the base frame should made of 30mm x

30 mm x 1.6 mm thick ERW tube. The cabinates

should made of 1 mm thick CRCA sheet with

recessed plastic handles and with lock and plastic

door latch. the hindges of the cabinate should be

made of sheet metal and pin arrangement. The

Wesource/ internal dimension of the two side cabinates

Ref should be 422 mm (W) x 455 mm (D) x 540 mm

(H). the internal dimension of the central Rupees FourtyTwo Thousand

cabinates should be 422 mm (W) x 455 mm (D) Three Hundred Nineteen Only

x 358 mm (H). The storage cabinate unit should

be actuated with C shaped handel lever. The

drawers should made of 1 mm thick CRCA sheet

with recessed plastic handels and work on double

extension ball slides for smooth glide. The

internal dimension of the drawer should be

mm (W) x 427 mm (D) x 92 mm (H) . The

mattress plateform should be 65 mm thick which

is made of 12 m thick ply and PU foam and

covered with leatherite cover.The cover should be

water resistance,fire retuadant, aniti

micraobial.the cover should have in-vitro

cytotoxicityfixing,

Providing, test report from

testing andrepted test lab . the

commissioning of

ABC type 6kg capacity fire extinguser monic

phosphate powder 50,stored pressure guage. Rupees Two Thousand Four

Controllable discharge mechanism class A rating Hundred ThirtyFour Paise Ten Only

3A & Class B rating as per IS 15683 ISI

mark(ABC Dry chemical powder-MAP 50%)

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing, fixing, testing and commissioning of

CO2 type fire extinguser of capacity 4.5 kg filled

with CO2 Gas as per IS 15222 with controll

discharge mechanism fitted with Hose and Horn

applicable on Class B Fire rating 21B confirm to

Rupees Six Thousand Nine Paise

101 M.R 8.00 IS 15683 bearing ISI mark CO2 cylinder as per IS Each 6009.5

7285monic phosphate powder 50,stored pressure

guage. Controllable discharge mechanism class

A rating 3A & Class B rating as per IS 15683 ISI

mark(ABC Dry chemical powder-MAP

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 kV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch

/ bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

Rupees Five Hundred EightyTwo

102 1-2-1. 68.00 box, single mounting base frame covered with Pt 582.77

Paise SeventySeven Only

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete CAT III

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 kV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan

regulator mounted and accessories with earth

continuity of following type erected on PVC /

Rupees Eight Hundred Nine Paise

103 1-2-2. 14.00 Metallic/Wooden box, single mounting base pt. 809.01

frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete CAT III

Point wiring for Individual Plug with & earth wire

of 1.5 sq.mm (Green) both are of ISI marked

kV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden

box covered with appropriate front plate modules

Rupees Six Hundred Twelve Paise

104 12.00 erected on / in wall / ceiling as per pipe erected Pt 612.06

with following type of accessories.[I] For 6A Plug

and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board (f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete CAT III

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

[II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.(f) with

Rupees Eight Hundred NinetyFour

105 12.00 medium class Rigid PVC pipe and accessories Pt 894.86

Paise EightySix Only

erected concealed in wall/ceiling complete Cat lll

[III] For 16A Plug and 16 amp switch with 2-4

sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing

wire from mcb d b board.(f) with medium class Rupees One Thousand FourtySix

Rigid PVC pipe and accessories erected Paise ThirtySix Only

concealed in wall/ceiling complete Cat lll

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting

Rupees Three Hundred Nine Paise

107 1-2-4. 30.00 base frame covered with textured / metallic/white Pt 309.06

front plate modules erected on / in wall / ceiling

with following type accessories CAT III

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

Rupees TwentyFour Paise

108 140.00 necessary PVC fittings & Junction boxes fixed Mtr 24.24

TwentyFour Only

1-3-2. with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

(b) 25 mm Rupees ThirtyThree Paise

ThirtyThree Only

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC Rupees Seventeen Paise

bushes, Check-nuts etc. complete of following Seventeen Only

sizes. (1) 20 mm

(2) 25 mm Rupees TwentyOne Paise

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and erecting Mains with 1.1 kV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

Rupees One Hundred Four Paise

112 1-4-1. 240.00 1.5 sq. mm copper conductor FRLS PVC Mtr 104.03

insulated stranded wire of green colour for earth

continuity of following size (A) With medium class

Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

Rupees One Hundred Fourty Paise

113 120.00 copper conductor FRLS PVC insulated stranded Mtr 140.39

ThirtyNine Only

1-4-2. wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories (a) 2 wire 4 sq. mm

(b) 2 wire 6 sq. mm Rupees One Hundred EightyFour

Paise EightyThree Only

Call bell gong type suitable for 230 volts, 50 c/s. Rupees FourtyTwo Paise

AC supply complete Erected FourtyTwo Only

Decorative call bell Ting-tong box type 250 volts Rupees SeventyOne Paise

complete erected SeventyOne Only

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion

resistance with diffuser with company

mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

CCT 3000 K to 6500K, Rupees Five Hundred ThirtyFive

Luminaire efficacy> 85 lumens/watt ,LED Paise Thirty Only

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A)

Tube Light with integral driver (v) 36-40 Watts,

Surge-2 kV, IP-20, conventional 4 feet CAT III

Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting

Rupees One Hundred EightyEight

118 2-15-2. 20.00 suitable for E14 / E27 / B22 lamp holders, pf >= Ea 188.87

Paise EightySeven Only

0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (iii) 10 to 15 watts CAT III

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Supplying and erecting LED street light / Flood

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminium

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %,

Rupees One Thousand Eight

CCT 3000 K to 5700K,Uniformity ratio >0.45,

119 2-16-1. 8.00 Ea 1871.53 Hundred SeventyOne Paise

Luminaire efficacy> 100 lumens/watt . LED driver

FiftyThree Only

efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4kV

integral and ,Light must have 440VAC line supply

with over-voltage protection. (iii) 24 - 36 watts

providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on

Rupees One Hundred

V A.C. system and having breaking capacity

120 3-10-1.(B) 32.00 Ea 123.22 TwentyThree Paise TwentyTwo

KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark CAT III

Providing & erecting 240 V MCB double pole

switch for lighting Load (B Curve) having 10 KA

Rupees Three Hundred Six Paise

121 8.00 breaking capacity & confirms to IS : 8828 in Ea 306.03

existing box having following capacity (A) 6 to

(B) 40 Amp. CAT III

Rupees Three Hundred

TwentyFive Paise TwentyTwo Only

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Sheets steel powder coated enclosure suitable

Rupees One Hundred SeventySix

123 3-11-4. 8.00 for incorporating One/Two nos. MCB. Ea. 176.75

Paise SeventyFive Only

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC

Rupees One Thousand Four

61439-1 & 3 without MCB to house appropriate

124 3-11-5. 4.00 Ea 1492.78 Hundred NinetyTwo Paise

nos. of MCBs.(The DBs should be used of same

SeventyEight Only

company of MCB to be used) suitable for (A)

single phase incoming and horizontal single

phase outgoing (b) sheet steel double door (IP-

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase Rupees Two Thousand Four

125 3-12-1. 4.00 240 V,50Hz. having characteristic of quick action Ea 2458.34 Hundred FiftyEight Paise

& tripping with all advance feature & do not ThirtyFour Only

incorporate any electronic component. for

following Max. rating erected as directed(ii)

40Amps. DP CAT III

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications with chamber

and heavy duty cover.(approved make OEM has Rupees Four Thousand Five

126 3-14-9. 4.00 to submit test certificate) & having back filling Ea 4591.46 Hundred NinetyOne Paise

compound of (B) Inner chemical (CCM FourtySix Only

Compound)- Resistivity:- 0.2 / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be

capable to retain moisture for long time

Necessary test report must be submitted. (a) For

Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Annealed bare Copper

Rupees Seven Hundred

NinetyFour Paise EightySeven Only

Supplying & erecting XLPE(IS:7098) (I)-88 ISI

unarmoured Aluminium cable 1.1 KV.grade to be Rupees EightyFive Paise

erected as directed of following size. © 2 core 6 EightyFive Only

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Providing and erecting Approved make Ceiling

fan with double ball bearing ISI mark with

condenser A.C. 23OV.50 c/s.1200 mm. sweep

Rupees One Thousand Five

complete, canopy and 30 cms. down rod erected

129 5-1-1. 14.00 Ea 1596.81 Hundred NinetySix Paise

on existing hook or clamp with 24/0.2 , 3 core

flexible wire with earthing. [Make shall be

approved by Engineer in charge]

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly

Rupees One Hundred Eight Paise

130 5-2-1. 7.00 painted for fan complete with necessary 24/ O.20, mtr. 108.07

3 core flexible wire with earthing.

Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a 16 Rupees One Hundred Eight Paise

Gauge M.S. box / Heavy Duty PVC box complete Seven Only

erected concealed in Ceiling with necessary

Providing & erecting open well type horizontal

mono block pump set with stainless steel body

having following specification (A) 0.5 H.P. single Rupees Eight Thousand Seven

132 9-4-1. 2.00 phase open well motor pump set having Ea. 8728.42 Hundred TwentyEight Paise

discharge of 115 LPM @ 15 mtr. head suitable FourtyTwo Only

for 32 mm dia. delivery pipe with control panel

Providing and erecting ISI marked PVC insulated

PVC Shethed Flat flexible Submersible copper

Rupees SixtyFive Paise SixtyFive

133 9-7-1. 50.00 cable approved make of following size. Mtr 65.65

(a) 3 Core x 1.5 Sq. mm

Making trench in soft soil of suitable width of

cm deep for laying cable or locating the fault all Rupees FiftyFive Paise FiftyFive

over the run and back filling the same and Only

making the surface as normal ground.

Ite Quantities Rates 2024-25 (with 1% L.C)

m. NBO No. Item Description Unit In Figure Amount

No Estimated Rs. Ps.

Supplying following size of Light duty “A” Class

Rupees One Hundred SeventyTwo

135 4-5-6. 40.00 G.I . Pipe & erecting as directed by Engineer-in- Mtr. 172.71

Paise SeventyOne Only

charge. (A) 25 mm dia

Supplying & erecting approved make SMC

press moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for

mounting mob & hinged doors as per Rupees Two Hundred NinetySeven

requirement having locking arrangements with Paise NinetyFive Only

mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps&

earth bolt of following size of box.(D) 140mm x

140mm x 100mm [deep]

Supplying and erecting B class galvanised iron

pipe 32 mm outside dia 45 cm long duly welded

on 20 cm x 20 cm x 3 mm thick M.S. base plate, Rupees Three Hundred

erected on wall or corner for mounting street light FourtyThree Paise Fourty Only

luminaire with necessary hardware materials duly

In Words Rupees SeventyEight Lakh Three Thousand One Hundred FiftyOne Paise SixtySix Only

* Estimated amount Put to tender

Add/Deduct__________________% above / below

1 All works shall be carried out as per Punlic Work Department and other specification of division or as directed.

2 All the columns in schedules should be filled in ink and the total of the entries ink last column should be struck by the contractor under his signature.

3 Rates quoted include clearance of site ( prior commncement of work and its close). In all respect and hold good for work under all

4 Servicable materials available after Demolishing / Dismentalling any item should be hand over to the concerned as per instruction of PIU engineer in

5 To be continued on additional sheets,if found necessary.