Repair Replacement of DI CI Water Supply Pipe line at SRC Temple Lane MH SHO GE Office MES Md area at Ramgarh Cantt under GE Ramgarh Cantt

Amount

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth and getting out for laying pipes as in soft and loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm, complete all as directed.

Removing excavated materials n.exc. 50 m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as directed.

M & L for laying cement concrete for supporting of CI/DI/GI pipes, 0.60 Running metres below ground level and upto 5 Running metres above ground level using PCC (1:2:4) type B2, 40 mm graded aggregate, smooth finishing without using extra cement, complete all as specified and as directed.

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints, 150mm bore, including burning off lead joints and recovering lead, from 150 mm bore pipe, for removal from site, complete all as directed.

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints, 200mm bore, including burning off lead joints and recovering lead, from 200 mm bore pipe, for removal from site, complete all as directed.

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints, 250mm bore, including burning off lead joints and recovering lead, from 250 mm bore pipe, including cleaning for refixing or removing to store complete all as directed.

Supply, laying, jointing and testing of Ductile iron (DI), pressure pipes with spigot and socket ends (for push on joints), centrifugally cast, class K-9, of 150mm dia, with cement mortar lining in inner side as per IS:8329/2000 (latest version) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified and as directed. Notes: Rubber gasket joint (push on joints) Excavation and earthwork shall be measured and paid separately.

Supply, laying, jointing and testing of Ductile iron (DI), pressure pipes with spigot and socket ends (for push on joints), centrifugally cast, class K-9, of 200mm dia, with cement mortar lining in inner side as per IS:8329/2000 (latest version) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified and as directed. Notes: Rubber gasket joint (push on joints) Excavation and earthwork shall be measured and paid separately.

Supply, laying, jointing and testing of Ductile iron (DI), pressure pipes with spigot and socket ends (for push on joints), centrifugally cast, class K-9, of 250mm dia, with cement mortar lining in inner side as per IS:8329/2000 (latest version) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified and as directed. Notes: Rubber gasket joint (push on joints) Excavation and earthwork shall be measured and paid separately.

M & L for Run lead joint for CI pipe pipe including spun yarn etc., for spigot and socket pipes and fittings for 300 mm bore, including clauking the spun yarn, complete all as specified and as direced.

M & L for Run lead joint for CI pipe pipe including spun yarn etc., for spigot and socket pipes and fittings for 250 mm bore, including clauking the spun yarn, complete all as specified and as direced.

M & L for Run lead joint for CI pipe pipe including spun yarn etc., for spigot and socket pipes and fittings for 200 mm bore, including clauking the spun yarn, complete all as specified and as direced.

M & L for Run lead joint for CI pipe pipe including spun yarn etc., for spigot and socket pipes and fittings for 150 mm bore, including clauking the spun yarn, complete all as specified and as direced.

M & L for Run lead joint for CI pipe pipe including spun yarn etc., for spigot and socket pipes and fittings for 100 mm bore, including clauking the spun yarn, complete all as specified and as direced.

M & L for Cast Iron fittings for spigot and socketed CI pipes for water mains upto 150 mm bore, such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, complete all as specified and as directed.

M & L for rubber gasket joints (push on joints) for spigot/socket end ductile iron water mains/ductile iron specials complete for 150mm nominal dia, complete all as specified and as directed.

M & L for rubber gasket joints (push on joints) for spigot/socket end ductile iron water mains/ductile iron specials complete for 200mm nominal dia, complete all as specified and as directed.

M & L for rubber gasket joints (push on joints) for spigot/socket end ductile iron water mains/ductile iron specials complete for 250mm nominal dia, complete all as specified and as directed.

Supply and fixing DI SPECIAL suitable for DI pipe class K-9 upto 250 mm dia, complete all as specified and as directed.

ranjit singh

AASHIRWAD ENTERPRISES