Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC 1 128 A SECOND FLOOR MOHAMMADPUR NEAR BHIKAJCAMA PLACE NEW DELHI 110066 | NEW DELHI | NEW DELHI | DELHI | 110066 | ₹8.3 L Quoted ₹8.5 L | L1 | Accepted-AOC ACEEPTED BEING LOWEST TENDER |
| 2 | L2₹10.2 L+₹1.7 L (19.5%)Rejected-AOC III 6 7 2ND FLOOR ABOVE BANK OF BARODA GOPINATH BAZAR DELHI CANTT 110 010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | ₹10.2 L+₹1.7 L (19.5%) | L2 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER |
| Sl No | Description | Qty | Unit | M/s Dhapola Elevator and Engineering L1 | MB Enterprises L2 |
|---|---|---|---|---|---|
| 1.00 | Comprehensive maintenance including renewal/replacement of defective parts of electrically operated 2x1lifts = 02 lifts (KONE Make) each of 08 passengers capacity with selective controls catering for six floors including ground floor, installed at B-7 in Residential Area at DEAL Dehradun complete all as specified and directed including any other spare parts required other than mentioned under Ser item 6 to 18, 20 to 31, 33 & 34 below shall to be deemed included in quoted rates complete, all as specified and directed. | 11 | Per Month | 18,200 ₹2,00,200 Lowest | 20,500 ₹2,25,500 |
| 2.00 | Comprehensive maintenance including renewal/replacement of defective parts of electrically operated 1x1Freight Elevator = 01 freight Elevator (Jhonson Make) each of 1000 Kgs capacity with selective controls catering for one floors including ground floor, installed at CERS Building New Technical area at DEAL Dehradun complete all as specified and directed, including any other spare parts required other than mentioned under Ser item 6 to 18, 20 to 31, 33 & 34 below shall to be deemed included in quoted rates complete, all as specified and directed. | 11 | Per Month | 9,000 ₹99,000 Lowest | 9,500 ₹1,04,500 |
| 3.00 | Comprehensive maintenance including renewal/replacement of defective parts of electrically operated 2x1=2 lifts with manufacturing year 2016, (OTIS make) each of 08 passengers capacity with selective controls catering for six floors including ground floor, installed at D-6 Block Residential building at DEAL Dehradun complete all as specified and directed including any other spare parts required other than mentioned under Ser item 6 to 18, 20 to 31, 33 & 34 below shall to be deemed included in quoted rates complete, all as specified and directed.. | 11 | Per Month | 16,500 ₹1,81,500 Lowest | 17,500 ₹1,92,500 |
| 4.00 | Comprehensive maintenance including renewal/replacement of defective parts of electrically operated 1x1=1 lift with manufacturing year 2008 (OTIS make) of 09 passengers or (safe working load) 612 Kg capacity with selective controls catering for five floors including ground floor, installed at SATCOM building DEAL Dehradun complete all as specified and directed including any other spare parts required other than mentioned under Ser item 6 to 18, 20 to 31, 33 & 34 below shall to be deemed included in quoted rates complete, all as specified and directed. | 11 | Per Month | 8,000 ₹88,000 Lowest | 8,600 ₹94,600 |
| 5.00Note for 1to 4:- (i) Contractor need to liaise with lift OEM and visit lift sites with OEM company authorised representative to check the complete lift machine room to identify the performance of lift, comprehensive safety inspection including load testing, emergency stop functionality and other critical safety checks. (ii) After Joint visit , If any repair maintenance required in the lift or any spare part then contractor should do the repair maintenance of the lift through OEM supplied part only in complete prospective and specification. (ii) After necessary Checking by OEM, contractor must produce the MoU with lift OEM for eleven month comprehensive maintenance of parts that are available with OEM and submit the ink sign copy to the Engr-in-charge within 30 days of acceptance of tender. (iv) Safety parameter and smooth functioning of lift should be checked by the lift OEM as per MoU at the beginning of tender & consolidated report to be submitted to Engr-in-charge. (v) During joint inspection, if any suggestion or specific maintenance related point is suggested by OEM for enhanced lift operation to be submitted to Engineer-in-Charge by contractor. | |||||
| 6.00 | Supply only Power Contactor 10 to 25 Amps rating,3 Ph 110 V ) suitable for lift of make Otis/Kone/Jhonson complete all as specified and directed. | 2 | Each | 1,200 ₹2,400 Lowest | 1,500 ₹3,000 |
| 7.00 | Supply only relay cards For control panel suitable for (OTIS/Kone/Johnson make) lift complete all as specified and directed | 2 | Each | 2,500 ₹5,000 Lowest | 3,200 ₹6,400 |
| 8.00 | Supply only in replacement of full length Infra Red Door sensor suitable for lift (make - Otis/Kone/Jhonson) complete all as specified and directed | 5 | Each set | 9,500 ₹47,500 Lowest | 12,000 ₹60,000 |
| 9.00 | Supply only main controller card / motherboard suitable for OTIS/Kone/Jhonson make lift complete all as specified and directed | 2 | Each | 3,200 ₹6,400 | 3,000 ₹6,000 Lowest |
| 10.00 | Supply only SMPS power supply 5A, 12/24 V DC or suitable Capacity for OTIS/Kone/Johnson make lift complete all as specified and directed | 2 | Each | 520 ₹1,040 Lowest | 5,000 ₹10,000 |
Tender Value
₹13 L
EMD Value
₹26,000
Closing Date
16 Oct 2025, 6:00 pmClosed
GE I RND DEHRADUN
GE I RND DEHRADUN DEAL RESIDENTIAL COMPLEX RAIPUR ROAD DEHRADUN 248008
COMPREHENSIVE MAINTENANCE AND REPAIR OF LIFTS, FREIGHT ELEVATOR, CONTROL PANELS AND ALLIED WORKS AT DEAL UNDER GE (I) RND DEHRADUN
2025_MES_731899_1
GE(I)RND/9511/E8/25-26
Open Tender
Electrical and Maintenance Works
Item Rate
330 days
Dehradun
Class E Category c (ii) FOR UNENLISTED CONTRACTOR (i) Enlistment criteria may be seen in Para 1.4 and 1.5 of section of Part I of MES Manual on contracts-2020 as available in all MES formations (ii) Copy of police verification /passport.
6 documents required · 6 mandatory
₹500
Yes
GE I RND DEHRADUN
₹26,000
Yes
8 Nov 2025
20 Sept 2025
18 Oct 2025
20 Sept 2025
16 Oct 2025
27 Sept 2025
20 Sept 2025 - 27 Sept 2025
Amount
Note for 1to 4:- (i) Contractor need to liaise with lift OEM and visit lift sites with OEM company authorised representative to check the complete lift machine room to identify the performance of lift, comprehensive safety inspection including load testing, emergency stop functionality and other critical safety checks. (ii) After Joint visit , If any repair maintenance required in the lift or any spare part then contractor should do the repair maintenance of the lift through OEM supplied part only in complete prospective and specification. (ii) After necessary Checking by OEM, contractor must produce the MoU with lift OEM for eleven month comprehensive maintenance of parts that are available with OEM and submit the ink sign copy to the Engr-in-charge within 30 days of acceptance of tender. (iv) Safety parameter and smooth functioning of lift should be checked by the lift OEM as per MoU at the beginning of tender & consolidated report to be submitted to Engr-in-charge. (v) During joint inspection, if any suggestion or specific maintenance related point is suggested by OEM for enhanced lift operation to be submitted to Engineer-in-Charge by contractor.
Supply only Power Contactor 10 to 25 Amps rating,3 Ph 110 V ) suitable for lift of make Otis/Kone/Jhonson complete all as specified and directed.
Supply only relay cards For control panel suitable for (OTIS/Kone/Johnson make) lift complete all as specified and directed
Supply only in replacement of full length Infra Red Door sensor suitable for lift (make - Otis/Kone/Jhonson) complete all as specified and directed
Supply only main controller card / motherboard suitable for OTIS/Kone/Jhonson make lift complete all as specified and directed
Supply only SMPS power supply 5A, 12/24 V DC or suitable Capacity for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only floor indicator 7 segment 12/24 Volt DC suitable for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only limit switch Suitable for OTIS/Kone/Jhonson make lift complete all as specified and directed
Supply only Reed switch suitsble for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only stop switch suitable for for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only Emergency alarm for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only travelling cable12 core (0.50 sqmm) for OTIS/Kone make lift complete all as specified and directed
Supply only main rope(13mm) make Usha martin for OTIS/kone/Johnson make lift complete all as specified and directed
Supply only door drive (make- Yaskawa/Fuji) for OTIS/Kone /Johnson make lift complete all as specified and directed
Supply & fixing of electronic drive in elevator control panel (Main VVVF drive) relevant for 15 HP electric motor complete with key board built in or detachable for proper control & command inputs and proper analysis of errors & trouble shooting by an engineer for proper functioning of OTIS/Kone/Johnson /Thaison/ECE/Jhonson Make lift complete all as sprcified and directed.
Supply only ARD with battery set suitable for OTIS/Kone/Johnson /Thaison/ECE/Jhonson lift complete all as specified and directed.
Supply only ARD instruction plate assembly with nut bolt and hardware for lift of make Otis/Kone/johnson complete all as specified and directed.
Supply only door shoe suitable for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only door safety lock suitable for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only thimble suitable for OTIS/ECE/KONE/Johnson make lift complete all as specified and directed
Supply only landing operating panel (LOP) for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only car operating panel (COP) for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only serial card suitable for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only door lock roller suitable for OTIS/Kone/johnson make lift complete all as specified and directed
Supply only Lift fan suitable size as per existing suitable for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only battery 7.5/ 12 AH suitable for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply only break linner suitable for OTIS/Kone/Johnson make lift complete all as specified and directed
Supply and replace LED recrssed ceiling light 5w square/round or as per existing type in lift complete all as specified and directed
Supply and replace Rubber mat 5 mm thick in lift siutable for car flooring incl necessary fixing arrangment complete all as specfied and directed
Material and labour for disconnceting of electric motor of 15/20 HP capacity from Lift, taking motor to workshop for rewinding /repair opening of motor, taking out burnt winding wire and rewinding with super emameled copper winding wire of suitable size/gauge and turns as per compatibility of capacity of motor including proper insulation, heat varnishing, drying with proper heat, reassembling electric motor, and taking motor to lift machine room connceting with lift and testing complete all as specified and directed
Supply and fix in repalacement of Car door 700 to 800 mm centre opening or siuable size as per existing with car header and door formator 1.2 mm 18 gauge304 grade stainless steel door panel in moon rock finish of Otis/ kone/Johnson with header and door with lock complete functional accesoories incliding infrared door curtain sensor/ detector consisting of the emitter and receiver, power supplybox, flexible cables relay output 1 A, 230 VAC/2A 30 VDC, operating temperature 20 degree to 85 fegree, 154 beams, reponse time 61 ms, highest beam 1860 mm, lowest beam 25mm and protection distance 0 to 5 m Incl necessary accesories for fixing sensorscomplete all as specified and directed by Engineer-in-charge. Make : as Per MOU submitted.
Supply and labour for replacement of landing door 700 to 800 mm size or as per existing size centre opening automatic 1.2 mm 18 gauge 304 grade stainless steel door panel in moon rock finish lift of otis/kone with header and door lock completeformator incl functional accessories complete all as specified and directed. Make : as Per MOU submitted.
Material and labour for replacement header for car door as per existing size with rollers, cam car door motor,formator, lock contacts by dismantaling of header and assembling new heafer with necessary joining materials nut bolts washers, welding, rivetingetc required complete all as specified and directed
Material and labour for painting of machinineries including all motors gear box LT electric panel board incl connected accessories etc , installed at lift room , painting with super emamelled Paint two coats of approved quality with spray gun after prepatation of surfaces complete all as specified and directed
Material and labour for Cleaing of lift pit and dewatring/lifting of water inside of lift pit by using pum set complete all as specified and directed
Material and labour for numbering on each floor of respective building lift (as G floor, 1 st floor,2 nd floor and so on) each floor wall depending on the level of building served by the lift and writing details on a PVC board specifying JE E/M, AGE E/M, operators details and fixing on top of inside/outside of the lift car at ground floor Note : (i) Each Job is considered for all the levels of the building served & directed by Engineer-in-charge
M&L for painting of lift car incl doors with two coats of super emameled paint of approved quality with spray gun after preparation of surfaces complete all as specified and directed by Engineer-In-charge.
MB Enterprises (BID ID -3451713)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .