SPECIAL REPAIRS TO BLDG NO. P-84 (ORS MARRIED ACCOMODATION) OF GARHWAL SCOUTS AT JOSHIMATH

Amount

M&L dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided as in sunken portion of first floor all as specified and directed.

M&L for demoltion of cement concrete in ground floor and pavings n.exc 15 cm thick (below or above ground level) and rubbish off the premises all as specified and directed.

M&L PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in mass concrete of WC/Bath sunken floor all as specified and directed.

M&L 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate as in flooring, finished surfaces rough to receive floor finishes all as specified and directed..

M&L coloured Non Skid ceramic tiles 7 to 8 mm thick, (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and directed.

All as per item No 6 above but laid over 10 mm thick plater in CM 1:6 all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 300x200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 by using 100% course sand on roof/chajja mixed with WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement to receive water proofing treatment all as specified and directed. Note : Water Proofing Compound shall be measured and paid separately.

M & L for rendering 15 mm thick plaster in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and directed.

M & L for rendering 10 mm thick plaster in CM 1:6 on stone masonry surfaces finished surfaces even and smooth without using extra cement all as specified and directed.

M & L for rendering 10 mm thick plaster in CM 1:4 on fair faces of concrete surfaces as on ceiling finished even and smooth without using extra cement all as specified and directed.

Taking down shutter exceeding 1.00 sqm but not exc 2 sqm all as specified and directed.

Dismantling of Plain or corrugated steel sheeting any gauge thickness, including nanital or similar pattern roof coverings all as specified and directed.

S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, wall etc, with grade of zinc coating 275 all as specified and directed.

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads all as specified and directed.

M & L fixed 3mm thick figured glass pin headed type glazing with oil putty, bead in squares n.exc 0.50 Sqm each all as specified and directed.

M & L fixed in repair for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane all as specified and directed.

Supply only liquid Integral waterproofing compound all as specified and directed.

Cleaning the newly plastered surface with wire brushes and cleaning top surfaces of cement concrete including flashings and junction of parapets etc and surface painting with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sqm blinded with grit or pea size gravel & 0.06 cu. m per sqm and lightly tampered (area of flashings etc shall be added to roof area) all as specified and directed.

M & L for Applying APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by thermofusion process and applying one coat of aluminium paint all as specified and directed.

Preparation of new surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and directed.

Preparation of new surface of wall and applying two coats of OBD over a coat of wall care putty all as specified and directed.

Preparation of new surface of ceiling and applying three coats of white wash all as specified and directed.

Preparation of old surface of wall and applying one coat of cement base paint all as specified and directed.

Preparation of old surface of wall and applying one coat of OBD all as specified and directed.

Preparation of old surface of ceiling and applying one coat of white wash all as specified and directed.

M & L for 75 mm thick type C-2 (1:3:6) using 40 mm graded aggregate as in plinth protection finished even and smooth without using extra cement laid in panels all as specified and directed.

Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face all as specified and directed.

Supply and fix 30 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as specified and directed.

M & L for 150 mm long aluminium tower bolt all as specified and directed.

M & L for 150 mm long aluminium handle all as specified and directed.

S & F for 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

S & F for 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed..

S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

S & F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

Preparation of new surface of any description. Not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Preparation of old wood surface of any description. not otherwise described, over 10 cm width or girth and applying a coat of synthetic enamel paint over a coat of pink primer all as specified and directed.

Preparation of old steel surface of any description. Not otherwise described, over 10 cm width or girth and applying a coat of synthetic enamel paint over a coat of pink primer all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm all as specified and directed.

S & F in repair Fancy type 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S & F in repair Fancy type 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S & F in repair Fancy type 15 mm bore chromium platedAngle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed.

S & F in repair 10 litres PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets all as specified and directed.

S & F in repair vitreous China squatting pan 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe all as specified and directed.

S & F in repair Brass chromium plated shower rose 125 mm size including fixing to steel pipe or union all as specified and directed.

S & F anodised aluminium alloy chromium plated curtain rods with fixing brackets, stops, rollers etc fixed in repairs all as specified and directed.

S & F in repair 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed.

Taking up or down steel tubing 15 mm bore steel tubing and connections including cleaning for re-fixing all as specified and directed.

Taking up or down steel tubing 20 mm bore steel tubing and connections including cleaning for re-fixing all as specified and directed.

S & F 15 mm medium grade galvanised with all fitting and fixed complete ao walls and ceilings or laid in floors all as specified and directed.

S & F 20 mm medium grade galvanised with all fitting and fixed complete ao walls and ceilings or laid in floors all as specified and directed.

S & F, Stainless Steel Plate Rack of Size (inch) 24" x 24" x 10 ", Model No - SSKPR - 310 all as specified and directed.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of the Granite all as specified and directed.

S & F 'P' Trap of Cast Iron 0f 100 mm bore all as specified and directed.

S & F '100 mm bore bend of CI pipe (any radius) diminishing pieces 0r tapers (larger bore measured) all as specified and directed.

S & F '75 mm bore bend of CI pipe (any radius) diminishing pieces or tapers (larger bore measured) all as specified and directed.

S & F 75 mm bore Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and directed.

S & F Cast iron soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall of 100 mm bore all as specified and directed.

S & F Cast iron soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall of 75 mm boreall as specified and directed.

S & F 20 mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairall as specified and directed.

S & F in repair stack clamp out of 50 mm by 5 mm flat iron and 16 mm dia round iron staya, including bolts and nuts and securing ends of stays to wall or roof of 100 mm bore CI pipe all as specified and directed.

S & F in repair stack clamp out of 50 mm by 5 mm flat iron and 16 mm dia round iron staya, including bolts and nuts and securing ends of stays to wall or roof of 75 mm bore CI pipe all as specified and directed.

S & F in repair 100 mm thick medium weight Butt hinges cold rolled mild steel and fixed all as specified and directed.

S & F in repair 75 mm thick medium weight Butt hinges cold rolled mild steel and fixed all as specified and directed.

S & F in repair 4 mm thick asbestos cement plain building boards, fixed to timber framework with screws as in ceiling all as specified and directed.

S & F in repair 2nd class hard wood having sectional area Exc 6 & n.exc 13 sq cm Plain fillets, square, rectangular or triangular in section clean sawn secured with nails or brads but bullnosed, splayed, chamfered or rounded on one edge or face all as specified and directed.

S & F in repair Mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate all as specified and directed.

S & F GI steel tube 40 mm nominal bore of medium grade laid in floor as in spout for sunken portion all as specified and directed.

ms triveni nirman

MS NANDAN SINGH FARSWAN

sidh builders

SIDHARTH CONSTRUCTION