Construction of science block in Govt.Sr. Sec.School Baranda in Tehsil Nurpur Distt. Kangar

Amount

Excavation in foundation, trenches etcetera in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work . jumper blasting work , soft and hard blasting and doing work in saturated soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation as directed by the Engineer-in-charge and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by Engineer in charge within all leads and lifts disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts and other incidental charges

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column and mass concrete etcetera including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetera upto any thickness upto all floor level including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in columns, pillars, posts and struts ( square rectangular or polygonal in plan ) in any heights / thickness/depths etcetera upto all floor level including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels sides and soffits of beams, beam haunching, cantilevers, girders, bressumers and lintels in any heights / thickness/depths etcetera upto all floor level including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point one five millimeters)thick welded with angle iron in frames 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing upto all floor level including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (one cement; six sand: twelve graded/,crushed stone aggregate 40mm(forty millimeters) nominal size ) mixed and vibrated mechanically and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads , lifts and other incidentals charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement; four sand : eight graded /crushed stone aggregate 40mm(forty millimeters) nominal size ) mixed and vibrated mechanically and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads , lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:2: 4 (one cement; two sand : four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation , footings, bases of colums etcetera and the like and mass concrete including pumping or bailing out water if any and carriage of materials within all leads ,lifts and other incidental charges . The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:2: 4 (one cement; two sand : four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size ) mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/ thickness etcetera up to all floor level including carriage of materials within all leads, lifts and other incidental charges . The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size ) mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness up to all floor level including carriage of material within all leads , lifts and other incidental charges . The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair cases ( except spiral stair cases) excluding landing but including preparing of the surfaces and finishing of nosing upto all floor level including carriage of materials within all leads, lifts and other incidental charges . The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size ) mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) in reinforced concrete chajjas of any thickness upto all floor level including finishing the exposed surface with cement mortar 1:3 ( one cement: three sand ) to give a smooth and even surface including the form work and curing complete upto all floors and carriage of materials within all leads , lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) to give a smooth and even surface including centering and shuttering etcetera but excluding cost of reinforcement in moulding as in cornices window sills etcetera in all girth upto all floor level including carriage of materials within all leads ,lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying damp proof course 38mm ( thirty eight millimeters ) thick with cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 12.5mm (twelve point five millimeter) nominal size ) mixed and vibrated mechanically including the cost of form work and curing complete and carriage of materials within all leads , lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Applying a coat of hot bitumen ( mexphalt 80/100 (eighty/ one hundred ) or equivalent using 1.70 kg. (one point seven zero kilogram ) per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil complete including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying mild/ tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all heights including cost of binding wire and carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Brick masonry using second class common burnt clay building bricks in super structure above plinth level in all heights / floor level in cement mortar 1;6( one cement; six sand)and curing complete including carriage of materials within all leads ,lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Half brick masonry using second class common burnt clay building bricks in super structures above plinth level upto all floor level in cement mortar 1: 4( one cement; four sand)and curing complete including carriage of materials within all leads ,lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6(one cement: six sand) and curing complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing standard angle iron door window frame single rebate manufactured from M.S. angle section of 35x35x4mm ( thrty five into thirty five into four millimeters ) and Mild steel flat 50x4mm ( fifty into four millimeters ) combined together to make one frame as per drawing and design including hinges jamb, lock jamb beed and if required angle thrashold of M.S.angle 50x25mm ( fifty into twenty five millimeters ) welded or rigidly fixed by mechanically means lugs with split end tails to each jamb including steel butt hinges 2.5mm ( two point five millimeters ) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved , steel primer after pretreatment of the surface as directed by Engineer-in- charge complete including carriage of materials within all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing angle iron cupboards frames manufactured from Mild steel angle iron section 25x25x5mm ( twenty five into twenty five into five millimeters ) thick including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angles 25x25mm ( twenty five into twenty five millimeters ) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm ( two point five millimeters ) thick with provision for locking arrangement and shock observers as specified and applying a coat of approved steel primer after pretreatment of the surfaces as directed by the Engineer-in-charge complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing factory made double steel shutter windows side hung ( one glazed and other wire gauged ) including frame of channel ISLC-75 ( seventy five ) fitted with mild steel flat 75x4mm ( seventy five into four millimeter ) and 50x 4mm ( fifty into four millimeter ) with opening side of channel to make multiframe and shutter of rolling steel Z-sectiion and T-section andT-hinges , handles with closing device and making provision of windows fixing with 16x3.15mm ( sixteen into three point one five millimeters ) lugs 10cm ( ten centimeter) long embedded in cement concrete block 15x10x10 cm ( fifteen into ten into ten centimeters) of 1:3:6 ( one cement: three sand : six graded crushed stone aggregate 20mm ( twenty millimeters ) nominal size ) or with wooden / steel plug and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings including providing and fixing glass panes with glazing clips and special metal sash putty of approved make for glazed shutter and wire gauge of IS designation 85-G ( eighty five-G ) with metal beading complete for wire gauzed shutter including applying a priming coat of red lead paint as per drawings and design or as per directions of Engineer-in- charge including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing mild steel Channel frame for doors ,windows and clerestory windows manufactured from Mild steel Channel section 75x40x 4mm ( seventy five into forty into four millimeters ) and M.S flat 75x4mm ( seventy five into four millimeters ) as per design and drawing including hinges jambs, lock jambs, beed and if required angle threshold old of M.S angle 50x25mm( fifty into twenty five millimeters) welded or rigidly fixed by mechanical means lugs with split and tails to each jamb including steel but hinges 2.5mm( two point five millimeters) thick with a provision of locking arrangements and shock observers as specified and applying a coat of approved steel primer after pretreatment of surfaces as directed by the Engineer-in-charges complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Binwa construction Private Limited

sourav mahajan

Sanjay Walia Govt Contractor

PAVNESH KUMAR

Neeraj

SHALINI KAPIL