SPECIAL REPAIR TO BLGD NO P-314 (OR MD ACCN) (QTR 08) AT KS LINE AT AHMEDABAD CANTT

Amount

Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

S&F Flush shutters 30mm solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part I), Klin seasoned and chemically pressure treated complete all as specified and directed.

M&L for 2nd class hardwood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitered and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats complete all as specified and directed.

S&F mild steel angle iron work as in doors frames, conforming to Fe-410-0 also testing complete all as specified and directed.

S & F pressed steel frames size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S & F pressed steel frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

M & L for providing PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in filling pressed steel frame complete all as specified and directed.

S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelaminated PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown on ser page No 156 of SSR Part II complete all as specified and directed.

S&F solid PVC door, cup board frame size 50mmx47mm made out of 5mm Prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire stapples complete all as specified and directed.

S&F aluminium anodised powder coated ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and one portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary opening for exhaust fan if reqd and necessary channel frame work with rubber gasket and aluminium beading etc complete all as specified and directed.

Supply & fix aluminium powder coated framed windows, any pattern, fixed/side hung/sliding three track , powder coated aluminium sections of approved make, with or without sash bars, suitable for 5 mm thick glazing and Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangementsetc, frame of window should be not less than 1.5 mm thick section complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

M & L grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with suitable aluminium frame of size 37x19x2mm complete all as specified and directed.

S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed.

S & F butt hinges 100 mm size heavy weight cold rolled mild steel complete all as specified and directed

S & F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

M&L Preparation of New surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying Two coat of synthetic enamel paint,incl one coat Primer complete all as specified and directed.

M & L providing, cement concrete type C-I 1:3:6 (using 20 mm graded aggregate) as in bed plates (for hold fast block) etc. complete all as specified & directed.

Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition)Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

S&F rolled mild steel sections as in framing for cladding, glazing, framing for chajja and the like fixed with angle cleats and connecting plates, etc. conforming to Fe-290 (Gde E- 165) complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated, etc) sheets in roof covering complete all as specified and directed.

S & F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws Complete all as specified and directed.(Note : Corrugation shape and colour of sheet shall be approved by GE)

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Roughening surface of old concrete / terrazo floor by peecking sweeping clean and washing down with water to remove dust etc. complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar complete all as specified and directed.

M&L UDAIPUR GREEN 18-20 mm thick laid and jointed with grey cement slurry incl rubbing and polishing with granite finish over and including 20 mm thick CM 1:4 screed bed complete all as specified and directed.(Note: All exposed side of stone slab to be rounding)

M&L machine cut Kota stone slab 18 to 20 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M&L machine cut Kota stone slab 18 to 20 mm thick as in riser to step including 10 mm thick rendring in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed.

All as per item No 36 above but on vertical surfaces incl 10mm thick backing coat of tiles in CM 1:4 complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0using 12.5mm graded stone agg as in Top surfaces finished even and fair complete all as specified and directed.

Demilition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.

M&L PCC type C-2 Mix 1:3:6 (40mm graded stone aggregate), 75mm thick in plinth protection/path finishing the surface even and smooth without using extra cement with joints filled with bitumen grade 85/ 25 and sand in equal proportions by weight complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape with grey cement and pigment and size conforming to IS 15658-2006 of 60mm thickness M-35 Grade complete all as specified and directed.

M&L for 100mm thhick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in Sub base finished even and rough complete all as specified and directed.

M&L sand filling under floor /over floor or in sand cushion under interlocking tiles including well ramming complete all as specified and directed

M&L for precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as approved by engr-in-charge

Demolition of Brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.

Taking up or down of 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down of 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 15mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete concealed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete concealed to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling of water tanks exc 1000 & n exc 2000 ltr capacity & removing to store complete all as specified and directed by the Engr-in-Charge.

S&F rotational moulded PVC water storage tank cylinderical, vertical with closed top of 1000 ltrs capacity, hoisted and fixed in position with and including PTMT float valve 20mm dia and making connections for inlet and outlet complete all as specified and directed.

S&F in repairs kitchen sinks made of stainless steel 1mm thick with drainage board over all size 915mmx460mm bowl size 410mmx330mmx160mm fixed in repairs complete all as specified and directed by Engr-in-Charge

S&F in repair stop cock 15mm cast copper alloy,screwed down, with chromium plated fancy type high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S&F in repair Pillar taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S&F in repair vitreous china wash basin, white flat back screwed down for iron pipewaste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand but excl taps, chain and plug complete all as specified and directed.

S&F in repair Water Closet ( Squatt pattern) Orissa pattern size 580 mm x 440mm, white, with 'P' or 'S' integral foot rest complete including provision of PCC bedding, complete all as specified and directed.

S&F in repair 10 litre capacity PVC flushing cistern, valve less symphonic type low level or high level with inlet, ball valve float chains pull and brackets complete with flush pipe 32mm dia complete all as specified and directed.

S&F in repair PVC connection 600mm long of dia 15mm complete complete all as specified and directed.

S&F in repair soap dish of 1mm thick stainless steel box type fixed with screws of size 150mmX150mmX100mm complete all as specified and directed.

Supply & fix 125mm size brass chromium plated shower rose fixing with 15mm dia pipe complete all as specified and directed.

S&F in repairlow density polyethylene of pressure rating 6kg/sqcm pipe 50mm bore in any length laid in trenches or floor complete all as specified and directed.

S&F in repair tubular towel rail 20mm dia D type and 60cm long including brackets fancy type brass chromium plated complete all as specified and directed.

S&F in repair grating PTMT square of size 150mm complete all as specified and directed.

M&L for 100mm dia Cast iron Nahani trap long necked, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

M & L in repair PVC ( SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces over and including cement plaster ( 1 : 4 ) 15 mm thick on fair faces concrete surfaces as in sunken floor including mixing of water proofing complound complete all as specified and as directed

M&L plain cement concrete 1:4:8 using 40 mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.

Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good cutting not exc 10Cm girth on Brick walls complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware,AC or Reinforced concrete) set in cement mortar internal dia of pipe in 100mm complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR ) PIPE in any length fixed to walls and floor with and including rubber ring joint and MS clamps complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR ) PIPE in any length fixed to walls and floor with and including rubber ring joint and MS clamps complete all as specified and directed.

M&L PVC(SWR) bends 75 mm(any radius), diminishing pieces or tapers(larger bore measured) fixed in repairs complete all as specified and directed.

M&L PVC(SWR) bends 110 mm(any radius), diminishing pieces or tapers(larger bore measured) fixed in repairs complete all as specified and directed.

M&L PVC(SWR) branch piece single (Single Y) equal or unequal 110 mm bore complete all as specified and directed.

M&L PVC(SWR) branch piece double (double Y) equal or unequal 110 mm bore complete all as specified and directed.

M&L PVC(SWR) branch piece single (Single Y) equal or unequal 75 mm bore complete all as specified and directed.

M&L PVC(SWR) branch piece double (double Y) equal or unequal 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore provided with access door complete all as specified and directed.

S&F factory made 50mm thk precast man hole cover , Size 1200mmx300mm complete all as specified and directed.

S&F factory made 50mm thk precast man hole cover , Size 600mmx300mm complete all as specified and directed.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed .

Material & labour for 15mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and smooth without using extra cement mixed with water proofing compound complete all as specified and directed..( Note- Water proofing compound should be mesured and paid separately )

Supply only integral water proofing compound complete all as specified and directed.

M&L rendering 5 mm thick in CM (1:3) on concrete surfaces of ceilling ,finished the surfaces even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with 2mm thick white wall care putty and a coat of primer complete all as specified and directed.

M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint over one coat of Primer on walls complete all as specified and directed.

M&L for preparation of new surfaces of ceiling plastered/AC sheet and applying three coat of white wash complete all as specified

M&L complete removal of existing treatement and applying two coats of oil bound distemper with 2mm thick white wall care putty and a coat of primer, old plastered or un-plastered surfaces on walls complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats cement based paint on over one coat of primer on walls complete all as specified and directed.

M&L for preparation of old plastered and un-plasterd surfaces on ceiling applying two coats of white wash complete all as specified and directed.

M&L for shotcreting/guniting 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC/CICO/PIDILITE)@ 2% by weight of cement in equal proportion using shot-crete pumps and allied equipment,in thickness 30 mm all as per manufactureres instruction.(Upto 7 m height) complete all as specified and directed.

S& F mild steel welded fabric of weight exe 3.5 Kg but n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete all as specified and directed.

S&F in repairs 25 mm dia fancy type drapary curtain rods with and including suitable fancy type brackets to both ends as required fixed in repair complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping /benching in man hole etc,finished even and smooth using extra cement incl necessary form work complete all as specified and directed.

S & F Floor door stopper of 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Removing of existing un-serviceable water proofing treatment , taking down cement plaster etc, of any description and claening of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete all as specified and directed.

M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.

Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm with 3 mm thick phenolic laminated white sheet cover for mounting of Piano Type switches, sockets, fan regulators complete for the following :-

One light / Exhaust fan point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting for one 16 amp socket outlet modular type for controlled by one switch on independent board complete.

S&F angle holder, insulated polycarbonate body with back plate complete all as specified and directed.. Make Havells Reo/Anchor Penta PC/SSK/CONA as approved.

S&F switch piano flush button single pole one way 6 amp complete all as specified and directed.

S&F switch piano flush button single pole one way 16 amp complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed.

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specified and directed.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed.

S&F bell multi music type, AC, 240 volts complete all as specified and directed.. Make-Anchor or SSK or Havells Reo as approved

S&F bell push, flush type, 6 amp 240 volts complete all as specified and directed.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth continuity conductor complete all as specified and directed.

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus as approved.

S&F LED fixture 8 watt including connection all as per Philips LED LINEA cat ref no. BN 550 WLED 6 - 6500 or eqivalent in Wipro or Havells as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as approved.

S&F MCB distribution board powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 8 ways.

S&F MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete all as specified and directed.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 16 amp. Make - Legrand DX3 cat ref no. 408587 to 408592 or equivalent in Schneider or Hager as approved.

Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in Schneider or Hager as approved.

Four pole 63 amp. Make-Legrand cat ref no. 408702 or equivalent in Schneider or Hager as approved.

Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and deposit to MES store.

M&L of ceiling fan recd from taking down any sweep any make, cleaning throughly, servicing of fan motor & parts fitted there in, oiling, greasing to bush / bearings, replacement of unserviceable parts if required, applying two coat of white synthetic enamel paint over one coat of primer on fan blades and body, re- assembling, testing hanging at site complete all as specified and directed.

Supply & fix exhaust fans AC single Phase 230/240 V of size 300 mm sweep with louver, metal body complete all as specified and directed.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and directed.

Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete all as specified and directed.

VIJAY CONSTRUCTION CO