Repairing and Renovation work of EMRS Building at Tilakwada Ta: Tilakwada Dist: Narmada.

Name of Work : Repairing and Renovation work of EMRS Building at Tilakwada Ta: Tilakwada Dist:

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

No. specifications) Quantity Unit Rate Amount

1 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift.

2 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and stacking 768.00 Nos. 196.66

them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

3 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type,

flushing tank etc. including stacking the materials with all lead and lift. 61.00 Nos. 424.10

4 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps

including stacking the materials with all lead and lift ( for any dia, of pipe) 2050.00 Rmt 78.50

5 Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime

concrete. 1284.00 Cumt 554.06

6 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

half brick walls for interior plastering upto floor two level and finished even and 5903.00 Sqmt 179.56

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) All Floors

7 Providing 10mm thick cement plaster (mala troweled finish) in Single coat on

Celling,& Soffits of Stair, concrete wall for interior plastering finished even and 3224.00 Sqmt 157.85

smooth in (ii) cement mortar 1:4 (1 Cement : 4 Sand) For ALL Floors

8 20 mm thick Sand faced Gutka cement plaster with 1x1 cm grooves as suggested by

this office consisting of 12 mm thick backing coat of C.M. 1:3 ( 1 cement : 3 coarse

sand ) and 8 mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse sand) for all 2243.00 Sqmt 353.98

heights as directed etc. complete.

9 Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty) & two coats of

primer of approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar dropping and other 10318.00 Sqmt 40.59

foreign matter and sand papered smooth.

10 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand 3789.00 Sqmt 90.48

papered smooth.+ Extra painting with plastic emulsion paint of pproved brand on

ceilings and sloping roofs.

11 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

to give an required shape even shade after thoroughly brushing the surface to remove 2560.00 Sqmt 122.14

all dirt, and remains of loose powdered materials.etc complete

12 Providing Water proofing Treatment on Sunk Slab including cement concrete flooring

1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid

in one layer and finished with a floating coat of neat cement average 50mm thick to 344.00 Sq.M 373.70

Prepare slope including water proofing chemical etc. Complete for Sunk Slab All

13 Providing and laying 300 X 300 Matt Ceramic tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 197.00 Sq.M 1017.30

coarse sand ) finishing with flush pointing in white cement.

14 P & L Colour glazed Ceramic tiles size 60 x 30 cm 6 mm thick in skirting risers of steps

and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed 1306.00 Sq.M 1070.50

with colour cement slurry

15 Providing and laying water proofing treatment with china mosaic tiles flooring over

avg 50 mm C.C. 1:2:4 bedding for maintaining slope for plain and curve surface &

mm to 20 mm of broken piece not more than 2.5CM of ceramic / glazed tiles ( one

for more colour as directed ) to be laid over cement mortar bedding of C M 1:3 (1

cement : 3 sand ) contain water proofing materials per bag of cement useas specified 3998.00 Sq.M 1164.53

by manufactured and slops to be tempered to bring mortar up to surface with using

white cement and colour pigment including rounding of junctions and extending

them up to 15 cm along the wall and curing with bends any patens or design as per

drawing and cleaning by using oxalic acid etc. complete.

16 Providing and fixing Double shutter Pivoted door without frame 35 x 100 mm Ms

pipe hollow frame work as shown in the desyailed design double shutter specially

designed hollow door with horizontal 25 X 25 mm. M.S. Sq. pipe bands at equal

distance throughout the height of the frame as per the detailed designed provided by 38.00 Sq.M 3843.05

architect. with 19 mm. marine ply with edge beading & laminate on both sides colour,

pattern and design of which is to be approved by Architect.

17 Providing and fixing 38mm Thick door Double shutter solid core finished having

factory fabricated std. Extruded aluminium colour anodized hollow section Jindal

19552 weight not less than 1.116 kG/MT {Section 63.50 x 38 mm x 2.50 mm thick } for

door frame, hollow portion of door frame shall be filled with wood to be insert for

durable grip of door hinges, with factory made 38 mm.thick flush door both side 1 78.00 Sq.M 3785.48

mm thick pre laminated with 6 Lever Mortice lock {Godrej or Equivalent), SS Aldrop

30cm long, SS Handle size 30 Cm Long, Tower Bolt size 20 cm & Floor spring heavy

duty etc. as per detail colour & pattern apporoved by this office including necessary

anodized alluminum fixtures and fastenings.

18 Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected fire retardant grade polyurethene foam

done in situ alongwith embedded wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water proof weather proof, termite

proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings & fastener sleeve.

19 Providing and fixing jindal Delux sliding (27 mm) series Two track Sliding alluminimum

window standard extureded colour anodized section with frame having frame

bottom member jindal section no:21402 @ wt. of 0.993 kg/Rmt, frame side and top

member jindal section no.:21402 @ wt. of 0.993 Kg/Rmt with sliding shutters of single

glass shutter top member Jindal section no.21481 @ wt.of 1.020 Kg/Rmt, bottom

member Jindal section no.21402 @ wt.of 0.993 Kg/Rmt & side member jindal section 791.00 Sq.M 4579.34

no. 21402 @ wt. of 0.993 Kg/Rmt & inter lock member jindal section no. 21419 @ wt.

of 0.253 Kg/Rmt. with 5 mm thick transperent plain float glass in shutter including

fitting, fixtures, rubber gasket and transperent silicon seleant as per drawing and

instruction of engineer in charge etc.

20 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required

capacity each with all necessary fittings and connection etc. complete on terrace. 31000.00 Liter 3.95

21 Providing, laying and jointing in true line and level 110 diameter U.P.V.C SWR (Type

B) Pipe conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall

be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 1410.00 Rmt 897.79

145 mm height at every 2000 mm centre to centre or shall be concealed in walls as

directed including necessary fittings such as bends, "Y" "T" shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of

22 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B Pipe

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fitting conforming to IS 14735-1999 of approved make for drainage system

pipeline, pipe shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using PVC Clamp of the size 160mm dia x 210 mm length x 196 mm high 1060.00 Rmt 834.38

at every 2000 mm centre to centre or shall be concealed in walls as directed including

necessary fittings such as bends, shoes, tees, etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials (i) 160 mm

23 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concealed 623.00 Rmt 195.67

as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

24 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and 211.00 Rmt. 148.12

joints and fixing the same with adhesive solvent, including cost of all materials. 40mm

25 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials. 25mm dia

26 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of following

dia. Nominal bore tube fitting and clamps including making good the wall, ceiling, and 87.00 Rmt. 253.82

floor, etc. complete 25 mm dia

27 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of following

dia. Nominal bore tube fitting and clamps including making good the wall, ceiling, and 131.00 Rmt. 170.36

floor, etc. complete 15 mm dia

28 Providing and fixing Health Fauset Heavy duty with hook with fitting 81.00 No 582.03

29 Providing and fixing Gun metal check or non-return full way wheel valve.(E) 40mm

30 Providing and fixing Gun metal check or non-return full way wheel valve.(C) 25mm

31 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii)

32 Providing and fixing Water Closet Squatting Pan (Indian Type W.C. Pan) size 580mm

Integral Foot Rest Type (A) Vitreous China.(I) Long pattern = White colour including

100mm size P or S trap for water closet squatting pan including jointing the trap with

the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand) with 25mm dia. 81.00 No 1678.67

Chromium plated brass half trun flush cock of approved quality including fixing in pipe

line G.I. inlet connection for flushing W.C. Pan etc. complete.

33 Providing & fixing of first quality (ii) Flat Back washbasin 550 mm x 400mm size. (i) In

white colour. including with approved sanitary grade material with C.P waste

coupling, waste pipe, 15mm dia Pillar & Stop Cock of approved brand with connection

15mm dia flexiable pvc pipe etc. complete

34 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated

screws down Bib Tap. (i) 15mm dia. 172.00 No 186.83

35 Providing and fixing brass screw down stop tap.(A) 15mm dia. make as approved by

Engineer In Charge. 83.00 No 205.83

36 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with

jali of the following nominal diameter of self cleansing design with C.I scread down or 44.00 No 600.23

hinged grating including the cost of cutting and making good the walls.

37 Providing and fixing S.W. Gully trap with C I grating brick masonry chamber and water

tight C I cover with frame of 300 x 300 mm size (inside) with standard weight 81.00 No 1246.92

(i)square mouth traps (C) 150 mm x 100 mm size P or R type

38 Supply, installation, testing, and commissioning (SITC) of Reverse Osmosis (RO)

Drinking Water Plant of 200 LPH capacity for a school building, complete with raw

water feed pump, multi-grade sand filter (MSF), activated carbon filter (ACF), water

softener (where required), 5-micron cartridge filter, high-pressure pump, RO

membrane assembly with FRP pressure vessels, UV sterilizer, ozone generator (where

specified), automatic control panel with dry-run protection, pressure gauges, flow

meters, conductivity/TDS meter, low and high-pressure switches, SS-304 skid,

interconnecting SS-304/UPVC piping, valves, fittings, electrical wiring, supports, and 5.00 No 166650.00

all accessories required for proper operation. The item shall also include connection

to raw water supply, treated water storage tank, reject water drain line, testing,

flushing, commissioning, trial run, operator training, one-year warranty, and handing

over. The plant shall produce potable water conforming to IS 10500 (Latest Revision)

and shall be complete in all respects as per approved drawings, technical

specifications, and the Engineer-in-Charge's instructions.

39 Providing and fixing 38mm Thick door Single shutter solid core finished having factory

fabricated std. Extruded aluminium colour anodized hollow section Jindal

weight not less than 1.116 kG/MT {Section 63.50 x 38 mm x 2.50 mm thick } for door

frame, hollow portion of door frame shall be filled with wood to be insert for durable

grip of door hinges, with factory made 38 mm.thick flush door both side 1 mm thick 142.00 Sq.M 3732.96

pre laminated with 6 Lever Mortice lock {Godrej or Equivalent), SS Aldrop 30cm long,

SS Handle size 30 Cm Long, Tower Bolt size 20 cm & Floor spring heavy duty etc. as

per detail colour & pattern apporoved by this office including necessary anodized

alluminum fixtures and fastenings.

40 Supply, stitching, and installation of window curtains complete with approved fabric,

lining (where specified), curtain tape, hooks, eyelets, and all necessary accessories,

including powder-coated aluminum/MS curtain track or SS curtain rod with brackets,

end caps, and fittings. Curtains shall be tailored to the required dimensions, with 348.00 Sqmt 2525.00

proper pleats and hemming, complete in all respects as per approved design, color,

and engineer/architect's instructions.

41 Scraping oil paint from steel and other metal surface and making the surface even

(with Hand Scraping.) 1507.00 Sqmt 53.01

42 Box cutting the road surface to proper slope and camber for making a base for road

work including removing the excavated stuff with desposing on the road side slope as 300.00 Cum 112.02

directed up to 50 mt. Lead

43 BT Metal 25 to 40 MM & Aggregate 13.2 and down chips & SD including conveyence +

Spreading the stone aggregate for rolling and W.B.M. including filling the interstices

to required camber and gradient (excluding spreading of Blindage)(iii) 25mm to 90.00 Cum 1153.62

50mm size crushed stone

44 Providing and laying foundation cement concrete 1:3:6 ( 1 cement :3 coarse sand :

aggregate 20mm nominal size ) graded concrete and curing complete 60.00 Cum 3925.48

45 Providing and and laying controlled cement concrete M250 and curing etc. comp.

including the cost of form work and reinforcement for R.C.C. work for internal road. 120.00 Cum 4185.96

46 Compaction and finishing of cement concrete road by tremix process, providing extra

labour charge for tremix ( Vaccum dewatering service ) process on cement concrete

road surface by using vaccum dewatering pump floater surface vibrator including 600.00 Sqm. 81.81

making groove 5mm width and filling with polyvynile polymer and rough finish to

surface as per instruction including leveling etc. complete.

47 Providing ISI mark FE 500D TMT steel reinforcement for R.C.C. work including

bending, binding, and placing. In position comp. Up to floor two level. 3300.00 Kg 77.29

48 Earthwork in cuting in all sorts of soil and soft murrum including conveying and

spreading the stuff, embankment as and where directed within 200meters from the 200.00 Cumt 137.33

end of the cutting with all required lead and lift.

49 Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete. 150.00 Cumt 304.60

50 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and stacking 768.00 Each 196.66

them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

In Word : Rupees Two Crore Twenty-Three Lakh Eleven Thousand Seventy-Seven and Paise Twenty-Seven Only.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned

above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 The amount of dismentalled credit materials at Rs. 125100 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and to be approved From the

Engineer In Charge.

Deputy Executive Engineer Executive Engineer

Cons. (R&B) sub Division Rajpipla (R&B) Division

Rajpipla Rajpipla