WBPWD/EE/BED/20/e-IT of 2020_21

Amount

Supply and fixing of 630A main switch with 4 pole SDF and SS enclosure (Make: ABB/Legrand/Siemens/L&T)

Supply & Laying of 3½/4 core 95 sqmm copper Armoured Cable on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. ( from meter to main switch)

Supply & Laying of 2 Run 3½/4 core 300 sqmm Aluminium Armoured Cable on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. ( from main switch to main LT panel)

Supply & Laying of 3½/4 core 50 sqmm Aluminium Armoured Cable on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below for 3½/4 core 95 sqmm copper Armoured Cable

for 3½/4 core 50 sqmm Aluminium Armoured Cable

for 3½/4 core 300 sqmm Aluminium Armoured Cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials for 3½/4 core 95 sqmm copper Armoured Cable

for 3½/4 core 50 sqmm Aluminium Armoured Cable

for 3½ core 300 sqmm Aluminium Armoured Cable

Supply & Fixing of perforated GI cable tray with perforation notmore than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as requiredof the following size. Incl. Al painting of MS support.With out angle iron support150x50x1.25mm (18SWG)

With 25x25x3mm angle iron support 300x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 150x50x1.25mm (18SWG)

300x50x1.25mm (18SWG)

Supply & Fixing 250volt of moduler type (12 module) plug socket computer board of comprising of lowing accessories. a) 6/16A switch & socket-------1 set b) 6A-------do------(--do--)----------2set c) Indicator----------------------------1set incl. Necessary interconnection by pvc insulated copper wire fluhed in wall. (Make: Legrand/Havells/ABB)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make: Legrand/Havells/ABB) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(for Power Plug)

S&F of 1200mm ceiling fan (make:-C.G zapar/Orient - Summer King/Usha - striker),

S&F MS fan clamp ms fan clam of 2 piece type for RC ceiling as per approved specification,fabricated from 40x9 mm MS flat incl. making good damages to building roof with satisfactory finishing & painting

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire.

S&F of 230v,100W step type electronic fan regulator (make Havells LIVIA/Legrand/Havells) asper GS

S & F the exhaust fan after cutting wall & manding good the damages to original finish incl. S & F GI louver shutter as followes.(Make: EPC/USHA/C.G) 8" dia modular exhaust fan

Supply & fixing of Single phase wall mounted Wall braket fan having metal body and speed control facilities with all accessories as required.

S&D of single/twin commercial flurorescent fittings with all accessories includinding supply of 28W T-5 lamp and all accessories Supply of Double LED fittings with 01 nos 18 watt led tube lamp. (Make: Philips-Cat No. TMC 501 P 1xT-LED 22W P3242 & 1 nos MAS LEDtube 1200mm 18W865 T8 I – 2100lm/Similar of Wipro/Crompton)

b) Supply of Double LED fittings with 02 nos 18 watt led tube lamp. (Make: Philips-Cat No. TMC 501 P 2xT-LED 22W P3242 & 2 nos MAS LEDtube 1200mm 18W865 T8 I – 2100lm/Similar of Wipro/Crompton)

supply & Fixing only 600X600 LED green Square type light fitting on false ceiling which suspended 25 cm bellow the ceiling with Suitable Size GI chain supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. FullGlow is a beautifully designed luminaire which is bound to delight the occupants with refreshing and comfortable experience through its pure form and glare-free light.(Make-Philips/Similar)

Supply & fixing of 8 watt sopt light for decorative areas

Supply & installation of 110 Watt LED High Bay Lights having versalite, Robust and Energy Efficient Suitable for high temperature ( 55degree) and for canopy application. The lights should be fixed at the above of the fire tender cars at the parking bay. The lights should be fixed including all accssories as required for proper illumination at the parking bay. (Make- Philips, Model- BY400V LED72S CW SY110 PSD S2 FG LILO WH / Crompton/Wipro)

Supplying and fixing double door Horizontal 8 way TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Incomming-63A FP MCB Isolator, Outgoing-24 nos 16A-32A SP MCB) (Make-Legrand or Similar) for bay lights and industrial sockets in fire tender parking area.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC For Bay light wiring and industrial socket wiring

Supply and installation of 25A timer controller in SS double door phosphatised powder coated 12 way SPN DB with neutral bar ,din rail with IP-43 protection with electrical accessories & front door locking arrangement with all connection ,earthing attachment on wall.The specifications are in follows: a) 25A DP MCB (10kA,c curve)-1 no.,cat no.- BB20250C, MCB housing should be thermostat material(fire retardent) b) 25A Three Pole Power Contactor-1 nos.,cat no.-CS94110 c)Daily & weekly programmeble basis digital time switch ,min switching time 1 min,25 ON/OFF programs,6 yes,Battery backup, settable DST & key pad lock features. Cat no.-67DDT0 d)12 way SPN DOUBLE DOOR DB- DB should have door reversibility feature, inbuilt pad locking facility,cat no. DB SPN012DD (Make- L&T) e)230V AC toggle switch-1 nos. f)Indicator Lamp-1 nos for Bay light control (.Make - Cabtree / ABB / Seimens/L&T)

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. (for parking bay area)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

L.W.C. must be quoted manually @1% on the total quoted value else the total quoted rate shall be treated incl. LWC as per rule. N.B. Rate should be quoted inclusive of GST.

S. A. ENTERPRISE

ULTRA ELECTRICALS AND ELECTRONICS

OVERSEAS TRADING AND SUPPLIES CORPORATION

SATABDI ENGINEERING COMPANY

SUBRATA GHOSH

SIKDER ENTERPRISE

S S Enterprise

A.B. ENGINEERING CO