Estimate for the cost of installing 3 line Solar fencing (8.44 km) in Pattikkad (Mellilam to Ninnukuzhy) having a protection measure for mitigating the Human Wild animal conflict in Pattikkad Range during 2024- 25

Amount

Solar Fence -8.44 Km

Solar Panel Solar module 200 watts 12 volts rating with minimum 10 years warranty against manufacturing defects .Solar charge controller to regulate the charging of the battery

Energizer . Must be from reputed Company . Must confirm to IEC 603352-76and national international standards of safety . Switch to high medium and low power setting . Full & reduced power output terminals can be operated at once on different fences independently . Should possess the following output characters A- Peak O/p Voltage not more than 10 KV on 50 k load B- O/P energ3.5 minimum C- Pulse duration 1.01-3.0 in sec D- Peak current 7.0-8 A high - Charge 1.01.4mC-high

od99841/2024_2025 : Battery (Tubular) 12 volts 130 AH maintenance free (Exide/Base) battery with in at least 5 years guarantee(Purchase)

LIGHTNING DIVERTER Must be capable of diverting stay lightening . The diverter assembly must be adjustable for spark gaps. Adequate earthing to be provided

Module stand Hot dip galvanized to minimum of 60 microns Zinc coating thickness tilled to 13-15 degrees

Lead-out Cable Must be double insulated with standing 15 KV voltage and inner core wire must be hot dip galvanized

CORNER POST GI 8 FEET B GALVANIZED 50 NB class ‘B’ pipes -8.0 feet long Hot dip galvanized to more than 60 microns (GI) or G.I post ISI Stay supports 25 mm diameter with brackets also hot dip galvanized (GI) Must include Fastener’s

Intermediate Post (Purchase)8” Galvanized insulated – (live posts) 1. 25X25X3 mm “T” post or 16 mm TMT rod hot dip galvanized –more than 60 microns, 8 feet height , Bottom Insulated to energizer the entire post

POST PROTECTION CLAMPS Properlysecuring clamps, hot dip galvanized with fastening provision -60 microns

SUPER STRAIN INSULATOR Must be of polyn carbonate material and should with stand of 4 feet long

PP Reel Insulator Must be of Virgin plastic material poly polypropylene or equivalent

Joint Clamps

Tension spring 15 cm length, Withstand 400 Kg

Wire tighter with following Specifications. In situtighter for proper tensioning or wires . Should be made from Al alloy non resting quality

EARTHING SYSTEM Must contain earth mixture capable retaining moisture and 8 mm dia stainless steel rod non rusting quality of 4 feet long

High Tensile Wire (12 gauge) (5000 mtr x 12.5) 2.5-2.59 mm wire diameter . High tensile wire with minimum of 230-300 gms/SQM zinc coating thickness . YTS 140.5 kg/m2 Break strength of 740 kg

14 Gauge WIRE For Binding Reel Insulators

Support Post Clamp

Support Post 6 ft., GI - 1 Inch.

Warning Signs Poly-ethylene plastic with statutory colours and signs

Bidder Name

ARTCOLTD