Supply and Installation of New fire fighting system for Different Municipal Building In Central Zone, Ahmedabad. (ARC TENDER)

Name of Work : Supply and Installation of New fire fighting system for Different Municipal

Building In Central Zone, Ahmedabad. (ARC TENDER)

Bill of Quantities

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTEMENT- CENTRA ZONE

Name of work :- Supply and Installation of New fire fighting system for Different Municipal Building In

Central Zone, Ahmedabad. (ARC TENDER)

Sr. Supply + Installation

No. Unit Rate Amount

Part-A - Fire Hydrant System

Supply, Installation, Testing & Commissioning of

Fire Hydrant & Sprinkler System as per the

Technical Specifications & tender Drawings .The

work shall be Completed in all respect as per the

Instruction of Engineer Incharge.The system shall

be Integrated with BMS (Refer the Technical

Specifications of BMS Specified in Electrical Tender

Document).The Auto Glow Signage applicable for

the respective system shall be scope of Vendor.The

Vendor shall Prepare and submit 06 Sets of detailed

shop Drawings as per Tender

Specifications/Tender Drawings, Vendor also shall

Submit 06 Sets of As Built Drawings and 03 Sets of

Soft Copy (in the form of CD in Editable Format

alongwith applicable Test Certificates,Data

Sheets,Operation & Maintenance Manual)

Supply, installation, testing, & commissioning of

electric driven Main Fire Pump suitable for

automatic operation consisting of the following

Back Pull out ,centrifugal end suction type pump

complete for delivery of 137 m3/hr (2280 LPM)

with 2900 rpm against a total head of 70 metres

with bronze impeller complete with Gland Packing

with Complete accessories like Base Frame,Anti

vibration Pads,Coupling etc to make the system

functional in all respect.

Squirrel cage induction , 3 phase ,415 Volt, 50 Hz,

Energy Efficient Motor suitable for above pump. (As

per the Specifications of Motors specified in the

Electrical tender Document)

Supply, installation, testing, & commissioning of

2 diesel engine driven Standby Fire Pump suitable for 2.00 Set 625000.00

automatic operation consisting of the following ( as

per specification ).

Back Pull out ,centrifugal end suction type pump

complete for delivery of 137 m3/hr (2280 LPM)

2150 rpm against a total head of 70 metres with

bronze impeller complete with Gland Packing with

Complete accessories like Base Frame,Anti

vibration Pads,Coupling etc to make the system

functional in all respect.

Air cooled (Radiator Type) Diesel Engine

developing suitable Power for the above pump

Complete with Exhaust Silencer,Hot Insulation with

Cladding,Supports ,Painting Complete with

Battery,Charging system,Cables, Panel (As per

General Specifications in electrical Tender),Diesel

Tank (Min capacity for 4 Hrs Opration) Complete

with Nozzles,Level Indicator, Isolation Valves etc

with Mounting Stand ,duly painted (Frame & Tank)

in all respect to make the System Functional.

Supply, installation, testing, & commissioning of

3 electric driven automatic pressurisation pump set 2.00 Set 150000.00

consisting of the following.

Vertical in line ,multistage Jockey pump complete

for delivery of 10.8 m3/hr against a total head of

70 metres with bronze impeller complete with

Gland Packing with Complete accessories like Base

Frame,Anti vibration Pads,Coupling etc to make the

system functional in all respect.

Squirrel cage induction , 3 phase ,415 Volt, 50 Hz,

Energy Efficient Motor suitable for above pump. (As

per the Specifications of Motors specified in the

Electrical tender Document)

Supply, Installation, testing & commissioning of

cubical type floor mounted fire control panel.The

panel shall be designed as per IS standard & Refer

General Specifications of LT Panels defined in

Electrical Tender Document including the list

approved makes.The Panel shall have facility to

Operate in Auto/Manual Mode for Electric Main

Pump,Diesel Pump & Jockey Pump). The Panel shall

be designed as per the SLD Drawing- HAL- UM -

- R0 - SLD For Fire Pumps Panel

Supply, Installation, testing & commissioning of

single headed SS 304, ISI mark oblique pattern

hydrant valve with 80mm diameter flanged inlet &

63 mm instantaneous type female out let with pvc

cap- chain spring release type lug and accessories

as per IS: 5290- 1983 (Type ‘A’)

Supply,Installation, testing & commissioning first

aid hose reel, full swinging with 30 mtr long, 25mm

dia rubber lined, with ss 304 shut off nozzle of

mm dia. confirming to IS: 884, 1969 including

25mm dia pipe connection from riser to hose reel

with complete accessories.

Supply ,Installation, testing & commissioning air

vessel of Min 450 mm dia. (8 mm thick) 1.5 meter

long made from M.S with 25mm-dia spring-loaded

air release valve, safety valve and gunmetal full way

valve. The Vessel shall be Painted with one Coat of

Red Oxide and Two Coats of Synthetic Enamel Paint

. The Vessel shall be Fixed and Mounted by Vendor

including anchoring etc. Two Numbers Extra Air

vents with Isolation Ball valves to be Provided in

the Piping at the Highest Point.

Supply ,Installation, testing & commissioning of M.S.

pipe heavy Class ‘C’ ISI marked as per IS: 1239/IS

3589 Part-I including cutting, screwing, welding etc.

8 with all fittings as tees, elbows, reducers, flanges

clamps hangers painting with one coat of primer

and two coats of synthetic enamel paint of approve

a 250 NB (6 mm Thickness) 2.00 Rmt. 4500.00

b 200 NB (6 mm Thickness) 2.00 Rmt. 3500.00

S.I.T.C of Pressure gauges - Glycerine Filled SS

with all accessories like needle- valve, Syphon etc.

Range 0-16 Kg/cm2 , Dial - 150 mm, Size - 1/2 "

Supply,Installation, testing & commissioning of

Diaphragm Type Pressure switch, housing shall be

10 die cast aluminum with SS 316 moving parts like 6.00 Nos 3500.00

pressure element and socket. the range 0 to

Supply ,Fabrication,Erection and Painting of Steel

Structure with one coat of Red Oxide and Two Coat

of Synthetic Enamel Paint for Support complete in

all respect with the anchoring etc.

Supply, Installation, testing & commissioning cast

iron double flanged ,including mating Flanges,type

IS marked sluice valve of the following size

complete with bolts, nuts, washers and inserted

rubber gaskets as required: As defined in Technical

Supply, Installation, testing & commissioning ISI

marked C.I (SS304 Disc) Butterfly valve of P.N

Rating as per Technical Specification ,the mating

flange and additional Pair of Flanges shall be

considered to Fix the distance piece with Butterfly

Supply,installation ,testing & commissioning of Ball

Valves 3 Piece Design ,Body - Forged or Cast Carbon

Steel ,Trim and Ball SS410 , Seat SS410 Threaded

End as per Technical Specification

Supply,Installation, testing & commissioning ISI

marked C.I double flanged dual plate type Non-

15 Return valves (SS 304 disc) Complete with Mating

Flanges,Nuts,Bolts and Gaskets, As per Technical

Supply, installation, testing and commissioning of

"Y" type Flanged Strainer with SS 410 mesh of at

least 10 times pipe area with flanged inlet and

outlet complete Complete with Mating

Flanges,Nuts,Bolts and Gaskets, As per Technical

S.I.T.C of ISI marked Ball Type Foot Valve, CI Body &

17 Nitrile Reinforced Ball PN 1.0 rating with matching

Flanges , Nut, bolts, washer & Gaskets.

S.I.T.C of SS 304 63mm dia branch pipe as per ISI

18 Standard , Complete in all respect with Nuts,Bolts 20.00 Nos 2000.00

,Gasket etc .As per Technical Specification

Supply & Installation of outdoor type hose cabinet

fabricated from 16g M.S sheet with full front glass

door and locking arrangement suitable to

accommodate , 2 no of 15 meter long hose pipe and

19 one branch pipe. It should be painted with one coat 20.00 Nos 4500.00

of primer and two coat of synthetic enamel paint.

Complete in all respect with Fixing Supports of

Steel Members Duly Painted in same color and

Clamping arrangement.

Supply,Installation, testing & commissioning 63mm

dia 15mtr long reinforced rubber lined hose pipe

confirming to IS: 636-1962 PART-A with ISI SS

male and female coupling, complete in all respect.

Supply,Installatation,Testing & Commissioning of

gun metal 4 way fire brigade in let connection with

21 63mm instantaneous coupling with plug, cap, chain, 2.00 Nos 12500.00

complete in all respect including, Nuts,Bolts,Gaskets

Wrapping and Coating of Under Ground Piping with

22 4 MM Pypkot anti Corosive tape , As per Technical 100.00 Smt. 550.00

Centrifugal,Electrical Operated,Vertical, Mono

Block, Motor above & Pump Below,Dewatering

Pump for Pump Room , Complete with Electrical

Panel,Level control & Cable etc. For auto operation,

Capacity -270 LPM, Head -15 Meters, The Pump

shall be suitable to Pump Dust,Dirt and Suspended

solids of same nature, Complete with Aluminium

Body,SS 304 Impeller,SS Fasteners,SS 410 Shaft.

The Power supply shall be 3 Phase,415 Volt and the

Cable in between from Panel to Pump shall be

vendor's scope. Refer the Secifications & Approved

makes of General Specification of Electrical Tender.

Obtaining approval on entire Fire Protection and

detection system from Local Fire Brigade authority

/ Insurance co. or from any other statutory body

with all respect the Statutory Approval Charges

24 paid to the Statutory authorities will be re 2.00 Lot 100000.00

imburshed by HAL on reciept of written approval

from Statutory authority and against submission of

Payment reciepts from Statutory Authorities.(Legal

Fess shall be paid Be Extra.)

Supply & Installation of 6 Kg ABC Extinguisher of

stored pressure type with mono ammonium

phosphate discharge tube and pressure gauge

complete. Tenderer shall give 3 years guarantee on

cylinder with gas and powder. Quantity & Quality

shall be as Latest Code -15683/BIS Standard.

Supply & Installation of CO2 Fire Extinguisher of

Kg capacity fitted with screw down type high

pressure control valve with 1.0 M long rubber

braided discharge hose with horn. The Body shall

be CCE approved with IS:2878 marking and

supplied with initial charge of CO2 gas. The valve

shall conform to IS:3224.Quantity & Quality shall be

as Latest Code -15683/BIS Standard.

Supply & Installation of 2 Kg ABC Extinguisher of

stored pressure type with mono ammonium

phosphate discharge tube and pressure gauge

complete. Tenderer shall give 5 years guarantee on

cylinder with gas and powder.Quantity & Quality

shall be as Latest Code -15683/BIS Standard.

S.I.T.C of Fire extinguisher cap. 5 kg.Modular type

Poweder Base as per ISI.

S.I.T.C of Air release valve with Body Brass, Internal

Parts & Float HDPE complete with all accessories.

Preparing working drawings, Getting Approval NOC

of Fire protection system from local fire authority

and any other relevant statutory authority at initial

30 and various other stages of work, including 2.00 Nos 75000.00

preparation of report / working and as built

drawings as per fire authority. Any official fees and

charges to be paid shall be borne by the Client.

Providing and fixing Orifice plates, S.S. 304, 12 mm

thick, bore and construction as per TAC's Sprinklers

manual / IS:15105, for all horizontal tapping for

31 hydrant system for reduction of pressure in the 20.00 Nos 1850.00

range of 3.5-7.00 Kg/cm2 including one pair of Slip-

on-Flange, nuts, bolts, gasket and complete as

S.I.T.C of SS Metalic Expansion Bellows for Pumps

with ASA # 150 Rating

S.I.T.C of of 2 Core X 1.5 Sq.mm FRLS Multistrand

33 PVC insulated Copper armoured cable with all 1000.00 Rmt. 130.00

required accessories.

Providing floor mounting stand for keeping 4 Nos.

of Fire Buckets 1500 mm in length, 900 mm in

height frame made out of 30x30x4 mm. angle iron

with cross supports for legs, welded with 4 hooks

and duly painted with one coat of red lead and two

coats of silver paint. With providing round bottom

Fire bucket of 9 Litres capacity (4 nos) as per IS:

2546 made out of 24 gauge G.I. sheet with extra

handle at bottom duly painted white inside and red

outside with Fire mark, on provided stand.

S.I.T.C of Emergency evacuation Exit sinages self

illuminating with battery back up of 2 hrs, along

with all required accessories such as driver,

Junction box etc required to complete the job.

S.I.T.C of 2 Zone Microprocessor Based Main Alarm

36 Panel With Power Supply & Built In LCD Display, 2.00 Nos 7500.00

Real Time Clock & Event Logging.

S.I.T.C of Conventional Electronic Hooter with

38 S.I.T.C of Conventional Manual Call Point 6.00 Nos 650.00

S.I.T.C of 2 core x 1 sq. mm flexible wire with pvc

conduit & accessories for alarm system

S.I.T.C of 3 core x 1 sq. mm flexible wire with pvc

40 conduit & accessories for on off switch from pump 400.00 Rmt. 90.00

house to each floor

41 S.I.T.C of Conventional Smoke detectors 120.00 Nos 1350.00

42 S.I.T.C of Fire Men Axe. As per the Requirement. 6.00 Nos. 1650.00

Supply & Fixing of Auto glow Signage's (On ACP

b) Fire Equipment 4" X 12" 20.00 Nos. 350.00

c) Fire Extinguisher 8" X 4" 40.00 Nos. 350.00

d) Incase of fire do not use lift, use, Use staircase 8’’

Providing and making Core Cutting with core

cutting machine for hole From 25 to 150 mm

44 diameter and depth as required in any thickness 60.00 Nos. 1200.00

Brick Masonary (With plaster) etc. complete as

directed by EIC.

Providing and making Core Cutting with core

cutting machine for hole From 25 to 150 mm

diameter and depth as required in any thickness

etc. complete as directed by EIC.

a) IN Brick Masonary 10.00 Nos. 1000.00

b) In RCC works 50.00 Nos. 1500.00

Providing, supplying, fabricating and erecting in

position the structural steel for colums, safety grills,

bars, truss, purlins, runners, cleats, insert plate,

base plate etc for all structural elements as per

detail, made up from closed structural steel hollow

sections (RHS/SHS including rolled section ) as per

46 IS 4923 of grade Yst 310 mpa - including cutting, 600.00 Kgs. 100.17

bending, jointing, connecting, welding and / bolting

and / riveting and fabricating and erecting in

position etc complete for all levels as directed. The

rate include all necessary fixtures, fastening

including welding rods of standard approved

quality etc for complete the job.

Applying priming coat over new steel and other

metal surface after and including preparing the

surface by throughly cleaning, oil, grease, dirt and

other foreign matter and scoured with brushes fine

steel wood, scrapers and sand paper with ready

mixed priming pain brushing red lead.

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including

cleaning the surface of all dirt, dust and other

foreign matter.

Excavation for foundation upto 1.50 Mt depth

including sorting out and stacking useful materials

and disposing off the excavated stuff upto

Meters lead (B) Dense or hard soil.

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

50 not exceeding 20 cm. in depth, consolidating each 200.00 Cmt. 79.95

deposited layer by ramming and watering etc.

Providing and laying controlled cement concrete M-

200 for curing complete excluding cost of formwork

51 and reinforcement for reinforced concrete work in 16.00 Cmt. 3745.00

(D) Pad Blocks, Foundations, Columns, pillars,

posts, and struts etc.

Mineral Fiber Ceiling: supplying and installing

15mm-16mm thick, 600 x 600mm acoustic tiles on

exposed, hot-dipped galvanized steel grid systems

(often 24mm wide). Common requirements include

GLIM-PLUS, Armstrong or equivalent brands.

Key Tender Specifications & Details Tile

Specifications: Mineral fiber acoustic tiles, typically

15mm or 16mm thick, often in 600x600mm Grid

System: Exposed grid system, white-colored, hot-

dip galvanized steel, with 24mm wide T-sections

.Installation Method: Suspended ceiling system with

hangers spaced at approximately 1200mm center-

to-center. Scope of Work: Often includes material

supply, labor, scaffolding, making openings for

electrical/AC fixtures, and debris removal.Common

Brands/Standards: GLIM-PLUS, Armstrong or

equivalent& as per directions of engineer – in –

Annual Comprehensive Type Maintenance Contract

of for Above Fire Fighting System For 1-Year DLP +

53 2 Years. Every six months Testing certificates with

Photographs should be sent to competent authority

by concern contractor. Annual comprehensive Type

Maintenance Charges only.

a First Year after Installation (One Year DLP) 2.00 Nos. 0.00

b One Year after DLP is Complete 2.00 Nos. 88457.00

c Second Year after DLP is Complete 2.00 Nos. 90000.00

Total Amount in Rs. Without Taxes

Total Amount in Rs. Without Taxes

I/We am/are willing to carry out the work at % above/below % (should be

written in figures and words below/above the estimated rates mentioned above. Amount of

my/our tender works out as under:

1) % above / below is to be submitted online only.

2) All work shall be carried out as per the specifications or as directed.

3) Rates quoted include cleaning of site (prior to commencement of work and at its

close) in all respects and hold formwork under all conditions, site moisture,

4) All the item rate are considering excluding cost of GST as per Government of

Gujarat Road And Building Dept. Reso. No.TNC/102022/457/C Dt.05/04/2022. So,

bidder shall be consider this change in BOQ

Seal and Signature of the Bidder Addl. City Engineer