Construction of Additional Block for Newly up-graded 100 bedded Civil Hospital at Thural Distt. Kangra (HP)

Amount

Excavation in foundation, trenches etcetera in earth work involving all classification of soil such as pick work, pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of intermediate soil, dewatering and removal of slush if arrisen during course of construction and lifts upto all heights including stacking the excavated soil not more than three meters clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimeter) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus excavation earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-in-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. Rate inclusive royalty, malkana, toll tax, GST and other taxes imposed by the government.

Excavation in drains and channels etcetra in earth work in all classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etcetra Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of material and other incidentals. Rate is inclusive of royalty, malkana, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:4:8 (One Cement isto Four Sand isto eight) graded stone aggregate 40mm (Forty millimetre) nominal size for haunching of pipes of the 150 mm ( One hundred fifty millimetre) internal diameters, necessary form work and curing complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification. The rate is inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of royalty, malkana, toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation,. Footings bases of columns and mass concrete. The rate is inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular, polygonal in plain in all floor level including of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etcetra including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths in all floor including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing in all floor including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls up to any thickness / any height including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:6:12 (One cement isto six sand isto twelve aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification and drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying plain cement concrete 1:2:4 (One cement isto two sand isto four graded crushed stone aggregate 40mm (Forty millimetre) nominal size & curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing and design including entire carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M20 mix design to obtain the minimum compressive strength 20N/mm2 ( twenty newton per square millileter) with cement contents not less than 330 kg/ cum with mechanically mixed and vibrated curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, base of colums, and the like mass cooncrete as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength of 20N/mm2( twenty newton per square millimetre) with cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding cost of form work and reinforcement for reinforced concrete work in coulmn, pillars posts and struts upto any floor level including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20(M-twenty) design mix to obtain the minimum compresive strength 20N/mm2 (Twenty newton per square millimeter) with cement content not less than 320 kg/cubic meter and curing complete and mechanically mixed and vibrated as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their supports balconies, beams, girder, bressumers and cantiliver upto any floor level including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength of 20N/mm2( twenty newton per square millimetre) with cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength 20N/mm2 (twenty newton per square millimetre) with cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design including cost of form work but excluding cost of reinforcement for reinforced concrete work in moulding as in cornies, window sills etcetra not exceeding 15cm in girth upto all floor levels including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M- Twenty) design mix to obtain the minimum compressive strength of 20N/mm with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete in reinforced concrete Chhajjas for all thickness in up to floor two levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement isto Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement for reinforced concrete work . including of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength of 20N/mm2 (twenty newton per square millimetre) with cement content not less than 320 kg per cubic meter mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in wall any thickness but not less than 0.10 M( Zero point ten)meter including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying tor steel of TataTISCO, SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (Twelve decimal five millimetre nominal size) mechanically mixed including cost of form work and curing complete, as required at site as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is including octroi, royality, Malkana, toll tax, sales tax or other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt) 80/100 (Eighty by hundred) or VG-10 using 1.70 kg (one decimal seven) kilogram per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked with kerosene as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor levels as per PWD specification, drawing and design and curing complete including scaffolding and cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Second class half brick work using common burnt clay building bricks with hoop iron in cement mortar 1:4 (one cement isto four sand) in super structure as per PWD specification, drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Second class brick masonry wall having over all thickness of 30 cm (Thirty centimetre) using common burnt clay building bricks in super structure upto all floor level with hoop iron and cross ties, laid in cement mortar 1:3 (one cement isto three sand) i.e. two numbers 11.5 cm (Eleven decimal five centimetre) thick wall with internal cavity 7 cm (Seven centimetre) wide complete as per PWD specification drawing and design and curing complete including scaffolding. (One face area of the wall will be measured for payment only) and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Second class brick masonry wall having over all thickness of 45 cm (Forty five centimetre) using common burnt clay building bricks in super structure upto all floor level with hoop iron and cross ties, laid in cement mortar 1:3 (one cement isto three sand) i.e. two numbers 11.5 cm (Eleven decimal five centimetre) thick wall with internal cavity 22 cm (Twenty two centimetre) wide complete as per PWD specification drawing, design and curing complete including scaffolding. (One face area of the wall will be measured for payment only) and including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:5 (one cement isto five sand) including curing complete as per approved specification, drawing, design and curing complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Random rubble masonry with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto Twelve graded stone aggregate) 20 mm (Twenty millimetre nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand ) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement isto six sand) including curing complete as per approved specification, drawing and design and curing complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Stone filling tightly hand packed under flooring including ramming and consolidation complete as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax , sales tax or other taxes imposed by the government.

Providing and fixing Coloured anodised aluminium frames for door, window and ventilator and glazing partition extrusion section of Jindal/ Hindalco as per approved shade with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade according to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required PVC / neoprene filles etcetra aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete as per approved specifications, drawing and design including carriage of material with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, sale tax, toll tax , sales tax or other taxes imposed by the government.

Providing and fixing Coloured anodised aluminium shutter of door , window and ventilator including providing and fixing hinges /pivots and making provision for fixing of fitting wherever required including the cost of PVC / neoprene gasket as required extrusion section of Jindal/ Hindalco as per approved shade with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade according to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides as required with PVC / neoprene fillets etcetera. aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is inclusive of all taxes imposed by the Government.

Providing and fixing 6mm ( six millimetre) thick glazing with glass pane of Modiguard/ Saint gobin in aluminium door, shutters . with PVC / neoprens gaskets complete weight not less then 15.00 Kg/Sqm (Fifteen Killogramme per square metre) as per the Architectural Drawings approved specification, (Cost of aluminium snap beeding shall be paid in basic item) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 5mm ( five millimetre) thick glazing with glass pane of Modiguard/ Saint gobin in aluminium for window, ventilator and Dormer, shutters . with PVC / neoprens gaskets complete weight not less then 12.50 Kg/Sqm (Twelve decimal five zero Killogramme per square metre) as per the Architectural Drawings approved specification, (Cost of aluminium snap beeding shall be paid in basic item) including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 4mm (Four millimetre) thick Frosted Glass panes of Modiguard/ Saint gobin with putty and nails including complete weight not less then 10.00 Kg/Sqm (Ten Killogramme per square metre) as per the Architectural Drawings approved specification. including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government..

Providing and fixing 12mm (Twelve millimetre) thick Prelaminated particle of action tesa / kitlam/ kitply/ green ply as per ISI and of approved shade for infill panels of aluminium door as per PWD specification, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing & fixing Stainless steel (grade 304) wire gauze of 0.5 mm (zero decimal five millimetre) diametre wire and 1.4 mm (One decimal four) millimetre aperture on both sides for fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm( (Fifteen into three millimetre) with necessary fitting as per detail, drawing of doors and windows as per the Architectural Drawings and approved specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing to existing door frames, 30mm thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 gauge( Ninteen gauge) thickness and size of 19mm x19mm ( Ninteen into ninteen millimeters) for styles and 15mmx15mm ( fifteen into fifteen millimeters)for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm( five millimeters) thick heat moulded PVC "C" channel of size 30mm( thirty millimeters)thickness, 70mm( Seventy millimeters) width cut of which 50mm ( fifty millimeters)shall be flat and 20mm ( twenty millimeters) shall be tappred in 45 ( forty five)degree angle on either side forming style and 5 mm( five millimeters) thick, 95mm ( ninety five millimeters) wide, PVC sheet out of which 75mm shall be flat and 20mm( twenty millimeters) shall be tapered in 45 ( forty five)degree on the inner side to form top and bottom rail and 115mm( one hundered fifteen millimeters) wide PVC sheet out of which 75mm (seventy five millimeters) shall be flat and 20mm ( twenty millimeters) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm( ten millimeters) thick, 20mm( twenty millimeters) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails jointed mitred and jointed with solvant cement adhesive including fixing of PVC shutter with existing frame with MS butt hinges/riveted with necessary screws of code No. 9.120 of Rajshri including and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing aluminium anodised powder coated pattern grill of Jindal 8 mm(eight millimtere) thick to existing window/ventilatior with 80mmx80mm panels holes with 25x8mm thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) as per approved specification, drawing and design including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing the complete box of cup board shall be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ century ply/ kit ply/ duraply/ Marino ISI marked including shelves. Back side of board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm (One millimetre) thick lamination ISI Marked of approved shade of Uniply / Green ply/ century ply/ kit ply/ duraply/ Marino and 19 mm (Nineteen millimetre) thick water proof comercial board of uniply / Greenply for shelves including hinges, handle,knob megnatic catcher complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.(The area of cup board shutter shall be measured and paid)

Providing and fixing 25mm (Twenty five millimetre) thick water proof commercial board shutter of Novapan / Kitply/ National/Action/Tesa with 6 mm (Six millimetre) thick hard wood edging and 1mm thick laminated form out side of approved shade and PGI sheet lining inside including hinges, handle,knob & neccessary fitting complete as per approved specifications, drawing, design,and entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing coloured / anodized aluminum sliding door bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete. The rate is inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

300x16mm (Three hundred into sixteen millimeter) size

250x16mm (two hundred fifty into sixteen milimeter) size

Providing and fixing coloured anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

250x10mm (Two hundred fifty into ten millimetre) size

150x10mm (Onw hundred fifty into ten millimetre) size

Providing and fixing coloured / anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetera complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

125mm (one hundred twenty five millimetre) size

100mm (one hundred millimetre) size

Providing and fixing 150 mm (one hundred fifty millimetre) matt finished Aluminium hard drawn hooks and eyes complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing Bright finished M.S. hydraulic door closer ISI Marked with necessary screws complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 25mm (Twelve millimetre) diameter stainless steel curtain rod and brackets plugs etcetra complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Kota stone 55x55/55x27.50cm with 7.5 cm (Seven decimal five centimetre) wide Jaisalmer yellow band flooring 20mm (twenty millimetre) thick laid over a base of cement mortar 1:4 (one cement : four sand) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, moulding and nossing complete as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body matt finish vetrified tiles of restile/ Nitco/ Rak/ Simpolo/ Kajaria/ Johnson as per approved shade in flooring laid over 12 mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as per approved specification, drawing and design complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body matt finish vetrified tiles of restile/ Nitco/ Rak/ Simpolo/ Kajaria/ Johnson as per approved shade in skirting riser of steps and dados laid over 12 mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as per approved specification, drawing and design complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600 mm (Six hundred into six hundred millimetre) double charge / Ultra Charge vetrified tiles of Resitile/ Nitco/ Kajaria/Rak/Johnson/Bell water proof stain and impact resistent heavy duty vitrified tiles of approved shade and colour in flooring laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specifications, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600 mm (Six hundred into six hundred millimetre) double charge / Ultra Charge vetrified tiles of Resitile/ Nitco/ Kajaria/Rak/Johnson/Bell water proof stain and impact resistent heavy duty vitrified tiles of approved shade and colour in in skirting riser of steps and dados laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specifications, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x300 mm (three hundred into three hundred millimetre) Antiskid Cermic Tiles of Premimum quality of Nitco/ Kajaria/ Johnson / Orient Bell in flooring & skirting laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specifications, drawing and design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x450 mm/ 300x600 mm (three hundred into four hundred fifty millimetre/ three hundred into six hundred millimetre) where as required Cremic Glazed tile of Kajaria/ Nitco/ Simpolo/ Somany/ Jonson/ Orient Bell in skirting, riser of steps and dado laid over 12mm (Twelve millimetre) thick cement mortar 1:3 ( one cement isto three sand) and jointed with white cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specification, drawing and design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five millimetre) labrador design(Rainbow series of NTC/ Atlantic slab flooring 40mm (forty millimetre) average thick on 20mm (twenty millimetre) average thick fixed on floor, Ramp cement Mortar 1:3 (One cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rbbing and polishing, cutting and moulding complete including carriage of materials within all leads, lifts and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 19 mm (Nineteen millimetre) thick polished Grey/black granite stone in work counter / top heaving semiround noising, moulding and laid over 20 mm ( twenty millimetre) thick base of cement mortor 1:3 (one cement isto three sand) and jointed with cement slury mix pigment to match the shade of granite stone including rubbing polishing, moulding and nousing complete as per approved specification, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing 40mm (Forty millimetre) thick Cement concrete flooring 1:2:4 (one cement isto two snad isto four aggregate) graded/crushed stone aggregate 20 mm (twenty milimeter) nominal size mechanically mixed including curing complete as per PWD specification, laid in one layer finished with a floating coat of neat cement. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 2mm (Two millimetre) thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with Wonder/ LG/ Unitex floor of approved adhesive on sub-floor (damp proofing treatment to be paid for separately) complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying Precast terrazzo tiles 300x300x25mm (Three hundred into three hundred into twenty five millimetre) thick automatic Hydraulic compressed and polished Terrazzo tiles of NTC in flooring and skirting ISI marked No IS: 1237 top layer in (50%) (Fifty Percent) white and 50% (Fifty percent) in white yellow dark green and maroon chips of size 0,B and 2B size with marble chips of specified sizes laid in floors, treads of steps and landings laid on a bed of 25mm (Twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete as per specifications, approved drawing and design including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Precast terrazzo tiles hydraulic compressed 20 mm (Twenty millimetre) thick (with marble chips of specified sizes) in skirting and risers of steps not exceeding 30 cm (Thirty centimetre) in height on 10 mm (Ten millimetre) thick cement plaster 1:3 (One cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of medium shades and as per specifications, approved drawing and design including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing plinth protection with 40 mm ( Fourty millimeter) thick interlocking tiles/ cement concrete paver block with 23 cm ( twenty three centimetre) dia half round RCC pipe for drainage purpose laid over 10cm (ten centumetre) concrete 1:4:8 ( one isto four isto eight) in bedding/ haunching complete including cost and carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 0.60mm (sixty millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA Durashine/ sail over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet, rubber washers complete with all accessories as required as per specification, drawing and design including carriage of materials with in all leads, lifts and other incidentals as per the direction and entire satisfaction of Engineer-in-charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing pre-painted steel sheet ridge or hips of TATA Durashine/ Sail 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved specifications, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing pre-painted sheet valleys 90cm (Ninety centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of TATA Durashine/ Sail in roofing with hot dipped metalic zinc coated sheet with top coat of regulatr modified polyster organic coating of 20 (twenty) mocrons over 5 (Five) microns coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with J or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted limpet and bitumen washers complete in all respect as per specifications approved drawing and designincluding cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing flushing 38cm (Thirty eight centimetre) overall with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of Tata/sail with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter & prepainted G.I. limpet & bitumen washers complete. .The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 30cm (Thirty centimetre) wide 25cm (Twenty five centimetre) deep plain G.I. sheet gutter of 0.60mm (zero decimal six zero millimetre) thick sheet fixed with bolts, nuts and washers etcetra having dome shape gratting including making necessary connections with rain water pipe complete including cost and carriage of material with in all leads, lifts and other incidentals as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150 mm (One hundred fifty millimetre) diametre high pressure P.V.C spigot and socket soil, waste and ventilating pipe of Supreme/Finolex/Prime working pressure not less than 6.0 kg/cm2 (Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Finolex/Supreme/ Prince including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

150mm (one hundred fifty millimetre) dia PVC plain bend

150mm (one hundred fifty millimetre) dia PVC shoe

Providing and fixing 100mm (One hundred milimetre) dia metre M. S. holder bat clamps of approved design to P.V.C pipes embedded in and including cement concrete block 10cmx10cmx10cm (Ten centimeter into Ten centimeter into Ten centimeter) of 1:2:4 (One cement is to Two Sand is to Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size and cost of cutting holes and making good the wall etc. The rates are inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Steel work welded in built up sections of Tata/Sail composed in beams, joists, channels, angles, tees flats with connecting plates or angles, cleats as in trusses and trussed purlins, main and cross beams, hips, jack rafters, purlins connect to common rafter and like work including cutting hoisting fixing in position & applying a priming coat of red lead paint complete including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Painting two coats(excluding priming costs) on new steel and other metal surfaces with enamel paint of Asian/ Nerolac to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Applying a priming coat over new wood and wood bases surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paints of Asian/ Nerolac brushing wood primer pink as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of Asian/ Nerolac brushing to give an any shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

6mm (six millimeter) cement plaster 1:3 (one cement isto three sand) in ceiling complete including curing complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen milimeters) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimetewrs) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

15mm (fifteen milimeter) thick cement plaster in fair coat on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimeters) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen milimeter) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for exterior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimeters) in girth, with cement mortar 1:5 (one cement isto five sand) complete including curing as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen milimeters) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimetewrs) in girth, in rough side with cement mortar 1:3 (one cement isto three sand) complete including curing as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying Unistone 12mm (twelve millimetre) thick cladding on wall surface with 12mm ( twelve millimeters) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge .Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 20 mm (Twenty millimetre) thick 10 cm (Ten centimetre) wide plain cement mortar bands in cement mortar 1:4 (One cement isto four fine sand) including scaffolding etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge .Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 20mm (Twenty millimetre) thick Cement plaster with grove in two coats,backing coat 15mm (Fifteen millimetre) and finishing coat 5mm (Five millimetre) thick on rough side of brick/stone masonry walls for exterior plastering upto floor all level including arrises,internal rounded angles,chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth complete including curing as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Finishing wall with Fine Dune/ Dune finish of NCL, ALLTEK/ spectrum textured wall finish natural grit of heritage coating of 1.5 mm (One decimal five millimetre) thickness of approved brand and manufacture and of required shade on undecorated wall surfaces (two or more coats) to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powedred material including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Applying Birla white wall care putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters and sand papered smooth to give final matt finish to the surface complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Finishing wall with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etcetera. complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Applying two or more coat of Acrylic Washable emulsion of Asian paint / Nerolac Suraksha paint / Berger paint / Dulux paint for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic including cost and carriage of materials with in all leads, lifts and other incidentals as per specifications, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of saele tax, toll tax, GST and any other taxes imposed by the government.

Wall painting (two coats) with premium emulsion paint of Asian paint / Nerolac Suraksha paint/ Berger paint / Dulux paint approved shade on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including cost and carriage of materials with in all leads, lifts and other incidentals as per specifications, approved drawing, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Wall painting (two coats) with acrylic emulsion paint of Asian paint / Nerolac Suraksha Paint/ Berger paint / Dulux paint of approved shade for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty required for matting the surface including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and Fixing 50mm (Fifty millimetre) diametre hollow stainless steel knock down railing of kich AISI 316 of fixed over 35mm (Thirty five millimetre) diametre S.S flat baluster in combination with 15x20mm diametre baluster ( Design code DT-53-2 - 163 ) placed at 1200mm (Twelve hundred millimetre) daimetre centre to centre along with 3 (Three) Numbers @ 16mm (Sixteen millimetre) mid rail connected at the side of baluster with fixture. The baluster would be fixed on to floor with casted base plate of minimum 6mm (Six millimetre) thickness. Base plate shall be concealed with suitable S.S 316 grade cover cap. Railing height to be taken 85 cm (Eighty five centimetre) from floor level complete in all as per specifications, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 50 mm ( fifty millimetre) dia hollow stainless steel hand rail slip resistance with rounded ends at two level at 75 cm and 90 cm ( Seventy five centimetre and ninety centimeter) high and extended 30 cm ( thirty centimeter) beyond top and botton of ramp as per detail and 25 mm ( twenty five millimetre) dia SST bullasters welded to 50 mm ( fifty millimetre) dia SST pipe embended in cement concrete @ 600 mm (six hundred millimetre) center to center as per detail drawing, design and specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax toll tax, GST and any other taxes imposed by the government.

Providing and fixing 50 mm ( fifty millimetre) dia hollow stainless steel pipe hand rail slip resistance along the stretcher way as per detail and embended in cement concrete of strecher way as per detail drawing, design and specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax toll tax, GST and any other taxes imposed by the government.

Providing and laying Dr. fixit torch shield (P-3160-3m) four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown or / and residual bitumen applied hot at 1.45 kg per sq .m (One decimal four five kilogram per square metre) of area for each course second course of roofing felt type 3 grade 1 (hessian base self finished bitumen felt) and fourth and final course of stone grit 6 mm (Six millimetre) and down size or pea sized gravel spread at 0.006 cum per sq.m. (zero decimal zero zero six cubic metre) including preperation of surface excluding grading complete including cost and carriage of materials with in all leads, lifts and other incidentals as per specifications, approved drawing, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm (Five hundred ninety five into five hundred ninety five) of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, (Ninety nine percent) Light Reflectance > 85%, (Eighty five percent) Thermal Conductivity k = 0.052 - 0.057 (zero decimal zero five two to zero decimal zero five seven) w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm (zero decimal three three) thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm (Fifteen into thirty two) of length 3000 mm (Three thousand millimetre), cross T of size 15x32mm (Fifteen into thirty two) of length 1200 mm (One thhousand two hundred) and secondary intermediate cross T of size 15x32 mm (Fifteen into thirty two millimetre) of length 600 mm (Six hundred millimetre) to form grid module of size 600x600 mm (Six hundred into six hundred millimetre) suspended from ceiling using galvanized mild steel item M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm (One thousand millimetre) length and L-shape level adjuster of size 85x25x2 mm (Eighty five into twenty five into two millimetre), spaced at 1200 mm (One thousand two hundred millimetre) centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24x24X3000 mm (Twenty four into twenty four into three thousand millimetre) made of 0.40 mm (zero decimal four millimetre) thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm (Four hundred fifty millimetre) centre to centre & 40 mm (Forty millimetre) long dry wall S.S. screws with 16 mm (Sixteen millimetre) thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6. The exposed bottom portion of all Tsections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 595x595x6 mm (Five hundred ninety five into fiive hundred ninety five into six millimetre) designer board of everest ( E-Board) ceiling with pre-painted GI channel framing @ 600 mm C/C (Six hundred millimetre centre to centre) complete including curing as per PWD specification,approved drawing, design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 60 mm ( Sixty millileters) thick heavy duty precast cement concrete inter locking paver blocks of NTC with vibro compacted upto M-50 grade including border or kurb block grey or coloured over sub-base of concrete laid over 25mm( twenty five millimeter) thick average thickness of cement mortar 1:4 (one cement :four sand) and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be measure sepertely including of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing orisa Pan No 20090 of size 53x41 cm ( fifty three into forty one centimeter) vitreous china water closet squatting pan (Indian Type W.C. Pan) of Cera/hindware/ Jaguar of star white/ snow white shade with low level PVC cistern (earth work, bed concrete, foot rest PVC cistern and trap to be measured and paid for separately) including entire carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china European type E.W.C. of star S. No 20087 (S-10) of size 57x35x39 cm (fifty seven into thirty five into thirty nine centimeter) wash down water closet of hindware/jaguar/cera of star white/ snow white shade with integral P or S trap including jointing the trap with soil pipe including entire carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china European type E.W.C. of star S. No 20092 (S-10) of size 61.5x34.5x40 cm (Sixtyone point five into thirty four point five into fourty centimeter) wash down water closet of hindware/jaguar/cera of star white/ snow white shade with integral P or S trap including jointing the trap with soil pipe including entire carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china European type W.C. Matrix fixed with Jet Pressure of hindware/jaguar/cera of star white/ snow white shade for Divyang with integral P or S trap including jointing the trap with soil pipe (seat cover/ jet pressure to be measured and paid for separately) including entire carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred millimeter) size PVC ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe with adhesive including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing plastic seal ( solid ) and cover of Hindware/ Jaguar/ Cera for wash down water closet with C.P. brass hinges ad rubber buffers ( solid type) white plastic seat and cover.within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 10.00 (Ten) litres capacity P.V.C low level dual flushing cistern (Sleek plus) of Cera/Hindware/Jaguar/ Hindustan with a pair of G.I.or mild steel brackets complete with fittings such as including PVC syphonic appratus, mosquito proof lid of PVC union and coupling for connection with intet, outlet and over flow pipe including cutting holes and making good the same and connection the flush baard with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china under counter wash basin Delta No 10010 and size 55x40 cm ( fifty five into forty centimetre) without pedestial of Hindware/Cera/Jaguar star white/ snow white shade with double hole for pillar trap with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same with all fitting as per specifications, approved drawing including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china wash basin Garnet No 10072 and size 58x43 cm ( fifty eight into forty three centimeters) of Hindware/Cera/Jaguar of of white/ snow white with double hole for pillar trap with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same including all fitting complete in all respect including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing Matrix wash basin size 55x40 cm ( fifty five into forty centimetre) of Hindware/Cera/Jaguar of star white/ snow white shade with double hole for pillar trap with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same with all fitting as per specifications, approved drawing including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous China pedestal of Jaguar/ Hindware/ Cera/ Jal for wash basin having recess at the back for the reception of pipes and fittings including carriage of material within all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) diametre C.P. brass waste (Heavy duty make) ISI marked NO-8931 & 8934) of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal for wash basin or sink with in all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) nominal size diameter rubber plug for wash basin, sink including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) nominal size diameters M.I. union ISI marked including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC Waste pipe for wash basin or sink including brass check net with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred milimetres) nominal size diameters CP grating of ESS/JAL/Kingston for nalhni trap of approved shade complete, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. (Chromium Plated) jet sprey of continental series/clasic series/floral series of Jaguar/ Hindware/ Cera for Europen seat of approved quality and colour with 1.5m (One decimal five metre) tube including carriage of material within all leads, lifts and other incidentals as per specifcations, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 600mmx450mm (six hundred millimetre into four hundred fifty millimetre) beveled edge mirror of superior glass 6mm (six millimetre) thick of Modiguard/ Atul/ Golden Fish mounted on 6mm (six millimetre) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. screws and washers including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass towel rail size 750x20mm (Seven hundred fifty into twenty millimetre) of continental series of Jaguar/Classic of Hindware/ floral series of Cera/Hindon series of Jal with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing as per as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing chromium plated brass soap dish of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal/ ESS with C.P. brass brackets fixed with cleats C.P. brass screws including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (Fifteen milimetre) diameters C.P. brass bib tap of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal as per specifications including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing cancealed C.P. brass stop cock of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal (heavy duty makes ISI marked ) 15mm (Fifteen millimetre) as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass pillar tap of Continental/Classic/ Florall series of Jaguare/Hindware/Cera 15mm (fifteen millimetre) dia (Heavy duty makes ISI marked No. 8931 & 8934) as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC connection pipe brass union 450 mm length 15mm dia ISI marked of including fitting within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and placing water tank of PVC (Poly venyl chloride) Sintex/Supreme/Finolex (Triple layer) ISI marked having capacity 1000 ( One thousand) litres each with necessary fitting including over flow pipes, scour pipe, ball valve and with cover locking arrangement of good quality including providing pads of sizes as required good quality all complete as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 75 mm (Seventy five) diametre PVC cowl ISI marked including fitting within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing polythene aluminium polythene ( PE-AL-PE) composite pressure pipe U.V. stabilized with carbon of KITEC confirming to IS 15450-2004 for water supply including clamps at one meter spacing, cutting fixing and making good the wall etcetra but excluding the cost of fitting internal work pipe exposed on wall complete including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 20 mm (Twenty millimetre) nominal bore/ diametre to wall ceiling and floor galvanised mild steel tubes of TATA steel/jindal (Hissar) (Medium grade) tube in trenches fittings and clamps including making good the wall, ceiling and floor. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15 mm (Fifteen millimetre) nominal bore/ diametre to wall ceiling and floor galvanised mild steel tubes of TATA steel/jindal (Hissar) (Heavy grade) tube fittings and clamps including making good the wall, ceiling and floor. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing high pressure P.V.C spigot and socket soil, waste and ventilating pipe of Supreme/Finolex working pressure not less than 6.0 kg/cm2 (Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm (Seventy five millimetre) diametre

110 mm (One hundred ten millimetre) diametre

150 mm (One hundred fifty millimetre) diametre

Providing and fixing PVC single Equal Branch with oval access door ISI Marked of Supreme/ Finolex with insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

150 mm ( One hundred ten millimetre) diametre

Providing and fixing composit end seal compression fitting as per IS-15450-2004 for water supply including Tee, Albows, reducers/ connectors copluers and clamps with jointing testing and fitting complete including cutting and making good the walls etcetra complete including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Equal Tee (1620)

Equal Tee (2025)

Elbow (1620x15mm)

Elbow (2025)

Male thread connector (1620x15 mm)

Male thread connector (2025)

Female thread connector (1620x15 mm)

Female thread connector (2025)

Coupler (1620)

Coupler (2025)

Reducer (1620x1216)

Reducer (2025x1216)

Providing and fixing PVC Clamps ISI Marked of approved design with steel screws and rawal plug etcetra complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

150 mm ( One hundred fifty millimetre) diametre

Providing and fixing Viterous china urinal large flat back no 60002 size (39x37.50x59 cm) (thirty nine into thirty seven point five into fifty nine centimetre) of Hindware/ Cera/ Jaguar of Star white/ snow white shade including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and Paid for separately) including carriage of material within all leads, lifts of material and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing Division Plate for urinals 600x300 mm ( Six hundred into three hundred millimetre) of viterous china of Jaguar/ Hindware/ Cera including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC Floor Trap size 110x75 mm ( one hundred ten into seventy five millimeters) ISI marked self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor complete.within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size), foundation concrete 1:4:8 (One cement: Four sand: Eight graded crushed stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern–I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Construction of manhole with R.C.C. top slab in 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetres nominal size), foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed stone aggregate 40mm (Forty millimetre nominal size) inside plastering 15mm (Fifteen millimetre) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand istoFour graded crushed stone aggregate 20mm (Twenty millimetre nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetre) 1000mm (One thousand milimetre) deep, including C.I. cover with frame (light duty single seal pattern–I) 450x610mm (Four hundred fifty into six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilogram) weight of cover 23Kg (twenty three kilogram) and weight of frame 15 Kg (Fifteen kilogram) with 300mm (Three hundred milimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement isto three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing heavy quality stainless steel kitchen sink of approved standard ISI marked with drain board of Diamond/ Unik with C.P. waste pipe, C.I. or M.S. brackets painted white i/c cutting holes and making good the same of size 610x510 (six hundred ten into five hundred ten millimetre) with bowl depth 200 mm ( two hundred millimetre) including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. Grab bar of Jaquar make catalog no AKP-35701P/ Hindware/ Cera including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (fifteen milimetre) C.P. Brass Angle valve of Continental Series of Jaguar contess plus series /Hindware / Ocean series of Nintage series of Kerovite/ hindon series of Jal/ Cera/ Jal as per specifications with nuts & bolts including carriage of material within all leads, lifts, and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass full way valve with wheel of continental series of Jaquar/ contess plus series of Hindware/ Ocean series of Cera/ Vintage series of Kerovite/ Hindon serie sof Jal within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing brass ball valve ( Horizontal plunger type) high pressure with copper float 20mm (Twenty millimetre) nominal bore of continental series of Jaguar contess plus series of Hindware/ Ocean series of Cera/ Vintage series of Kerovite / Hindon series of Jal within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 455x610mm (four hundred fifty five into six hundred ten millimetre) light duty rectangular C.I. manhole cover with frame cover weight 38KG (thirty eight kilogram) (single seat) including entire carriage of material within all leads, lifts and other incidental, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Constructing brick masonry chamber for under ground CI inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement : five sand) cover with frame (light duty) 355mmx6mm internal dimensions total weight of cover with frame to be not less then 38Kg. (weight of cover 23Kg. and weight of frame 15Kg) RCC top slab with 1:2:4 (one cement : two sand : four graded stone aggregate 20mm nominal size) foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40mm nominal size) in side plaster 15mm thick with cement mortar 1:3 (one cement : three sand) finished smooth with floating coat of neat cement on wall and bed concrete etc. complete. Inside dimension 455x610x450mm deep single pipe line. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying ( to level or slope) of PVC 150 mm (One hundred fifty millimetre) diametre of sewerage pipe of working pressure not less than 6.0 kg/cm2 (Six kilogram per square centimetre) of Fenolex/Supreme/Prince including filling the joints with approved adhesive complete including cost and carriage of material within all leads, lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing & Fixing water lifting pump ( Tolu pump ) of Havells / Usha / Crompton / Kirloskar 1.00 H.P centrifugal head range 6 - 25 (Six to Twenty) meter 20mm (Twenty millimetre) nominal bore making necessary connection, fittings and accessories as required including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying to galvanized mild steel tubes (medium grade) 15mm (fifteen millimetre nominal bore/ diametre) including all tube fittings wall sealing and floor of Jindal/TATA Steel nipples, elbows, unions, tees and clamps and within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

PARAS SOOD