Loading
Loading…
Loading…
Tender Value
₹7.5 L
EMD Value
₹15,100
Closing Date
12 Jun 2026, 3:00 pm6d left
Executive Engineer, Manipur University.
Manipur University Canchipur.
Providing of Aluminium partition for Staff room on the 1st floor of rear block and existing Library of MIT at MU campus.
2026_MU_911596_1
413/2026-27/ENGG/MU/Civil
Open Tender
Civil Works
30 days
As Per Tender Document
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
The Registrar MU
₹15,100
Canchipur
4 Jun 2026
4 Jun 2026
15 Jun 2026
4 Jun 2026
12 Jun 2026
4 Jun 2026
10 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctionc, at top, bottom and sides with required EPDM rubber/Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling CP brass, stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately). | - | - | - | - | 1 |
| 2 | 18.1.1 For fixed portion. | - | - | - | - | 2 |
| 3 | 18.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron). | 0.2 | kg | 1 | ₹0.2 | 3 |
| 4 | 18.1.2 For shutter of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately). | - | - | - | - | 4 |
| 5 | 18.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron). | - | kg | 1 | - | 5 |
| 6 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). | - | - | - | - | 6 |
| 7 | 18.3.1 With float glass panes of 5.50 mm thickness. | 1 | sqm | 1 | ₹1 | 7 |
| 8 | Filling the gap in between aluminium frame & adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. | - | - | - | - | 8 |
| 9 | 18.6.1 Upto 5mm depth and 5mm width. | - | metre | 1 | - | 9 |
| 10 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc.complete. | - | each | 1 | - | 10 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
BOQ_958041.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid