Municipal General Funds/ ASC Grant

Mild Steel Components as per 14103/1994 with its ammendments & revisions and part there of excluding taxes Hax Bolt (M12 X 40) As IS 1363

Mild Steel Components as per 14103/1994 with its ammendments & revisions and part there of excluding taxes Hex Nut (M12)

Mild Steel Components as per 14103/1994 with its ammendments & revisions and part there of excluding taxes Washer (4mm thick) for M12 Bolts

Mild Steel Components as per 14103/1994 with its ammendments & revisions and part there of excluding taxes Handle assembly (with out axle)

Mild Steel Components as per 14103/1994 with its ammendments & revisions and part there of excluding taxes Socket (Rise Pipe Holder)

Mild Steel Components as per 14103/1994 with its ammendments & revisions and part there of excluding taxes Chain with Coupling

Mild Steel Components as per 14103/1994 with its ammendments & revisions and part there of excluding taxes Spacer for handle assembly

Mild Steel Components as per 14103/1994 with its ammendments & revisions and part there of excluding taxes Water Tank assembly

Connecting rod 12mm 3mts long (Electro Galvanizing bright bar) along with M12 x 50 long and M12 x 20 Long Hex Couple at eigher end welded)

Deepwell Hand pumps components- Stainless Stell as per IS: 14105/1994 with its ammendments & revisions and part there of excluding taxes Handle axel with two nuts and one washer 4mm thick

Deepwell Hand pumps components with leaded Tin Bronze as per IS: 14102/1994 with its ammendments & revisions and part there of excluding taxes Flowers

Components confirming to IS : 9301/1990 and IS: 13056/1994 (Not covered in components of IS: 14101/1994 to 14105/1994) with its ammendments & revisions and part there of excluding taxes Cylender Assembly (Complete unit inclusive of stainless steel plunger rod 12mm dia with NITRILE rubber pump bucket)

Components confirming to IS : 9301/1990 and IS: 13056/1994 (Not covered in components of IS: 14101/1994 to 14105/1994) with its ammendments & revisions and part there of excluding taxes Single side shielded bearing confirming to IS 6456/1972 SIL, HMT, NBC, MB, TAT, URB/SBL or any other make approved by UNICEF and acceptable to SGS (India) Limited

Supply of Galavanized mild steel pipes medium class of 32mm dia meter confirming to IS: 1239/Part- 1/1990 continously welded/ high frequency indection welded (HFIW) type and screwed at both ends as per IS:554 and one end fitted with socket (medium class) manufactured from seemless pipe as per IS: 1239/part-2/1992 and out side diameter minimun 42.9, wall thick ness 3.20mm and SWG 10, Nominal mass of steel tubes plain end 3.1 Kg/mtr, 323 Mts/ton, Screwed and socketed 3.13 Kg/ mtr, 319 mtr/ton, No. of pipes 50 per ton bundle, 49 socket minimum OD MM and 51 minimum length MM and other end fitted with plastic ring (Each pipe should bear ISI mark and manufacturers trade nark) in 3 meters length including loading, unloading charges transportation and excluding all taxes etc., SSR- 2024-25 9Page No. 203/875)