Construction of Category E-1 type Quarters at Vanthali Dist. Junagadh

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Excavation for foundation upto 1.5M depth including sorting out and stacking of

1 useful materials and disposing of the excavated stuff upto 50 Meter lead. (A) Loose 102.00 122.93 cum

& soft soil

Excavation for foundation for depth from 1.5 M. depth including sorting out and

2 stacking of useful materials and disposing of the excavated stuff upto 50 Meter 70.00 157.15 cum

lead. (B) Dense & hard soil

Excavation for foundation for depth from 1.5 M. to 3.0 M including sorting out

3 and stacking of useful materials and disposing of the excavated stuff upto 50 98.00 287.21 cum

Meter lead. (D) Hard Murrum

Providing and laying controlled cement concrete M.150 for curing complete excluding

4 cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, 15.00 4028.21 cum

footings, Base of columns and Mass concrete

White Stone Bela mesonry block in course found & plinth with stone of approved

5 quality in Cement Mortar 1:5 (1-Cement : 5- course sand) including packing the joints 56.00 6226.65 cum

etc. complete.

Providing and laying controlled C.C.M.250 & curing complete including the cost of form

work but excluding the cost of reinforcement for reinforced concrete work in

foundation,footing bases of columns and the like and mass concrete.

Providing and laying controlled C.C. M.250 & curing complete including the cost of

7 form work but excluding the cost of reinforcement for reinforced concrete work in 4.00 7939.61 cum

Collumns, up to plinth.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand

8 broken stone aggregates 40 mmnominal size) and curing complete excluding cost of 45.00 3095.24 cum

formwork in (A) Foundation and Plinth

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

9 foundations etc. in layers not exceeding 2cm. in depth consolidating each 187.00 136.91 cum

disposited layer by ramming and watering.

10 thickness including watering, ramming and consolidating etc. completed. 91.00 301.77 Cum

Filling in plinth with sand under floors including watering ramming, consolidating

and dressing complete

Anti Termite System P/L of Permenent piping technology anti-termite treatment

before flooring work by installing LLDP (Low linear density Polyethylene) tube of 8 mm

O.D. & 6.4 mm I.D. With in Built Pressure Compenstaion chip every 30 cm interval in

the tube,having working pressure of 2 kg/cm2 and realese rate of 1.9 ltr/Hour fixed by

P-Clip and nails. The LLDP pipe shall be installed at the entire periphery of the building

and at internal network of building depth of 20 to 200 mm under floor every 2 to

mtr.c/c distance (adjustble as per building layout) & Ends of loop pass through a PVC

Elbow of of minmum 32 mm lD at junction box of wall and floor level,entring into a

steel reinforcmed grooved flexible pipe mini.22 mmLD leading into junction box and

during injecting chemicls for termite control tretment.The anti-termite chemical

Lmidcloprid 30.5% SC Mix as per IS 6313(Part-III) Shall be injected by the pressure

pump diluted with water @ 10.5 ml/5ltr of water at the rate of 2 kg/sq.cm. @

Ltr/SMT.the Contractor shall submit approved line plan for piping system and junction

boxes dully approved By Engineer-in- charge with bond of 5 Years warranty

Providing and laying controlled C.C. M.200 & curing complete including the cost of

form work but excluding the cost of reinforcement for reinforced concrete work in

Collumns, pillars, posts & struts upto floor two levlel for G.F.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and laying controlled C.C. M.200 & curing complete including the cost of

form work but excluding the cost of reinforcement for reinforced concrete work in

Collumns, pillars, posts & struts upto floor two levlel for F.F.

Providing and laying controlled C.C. M.200 & curing complete including the cost of

form work but excluding the cost of reinforcement for reinforced concrete work in

Collumns, pillars, posts & struts upto floor two levlel for .S.F.

Providing and laying controlled C.C.M.250 & curing complete including the cost of form

16 work but excluding the cost of reinforcement for reinforced concrete work in Beam 22.00 6046.87 cum

upto floor two level for G.F.(plinth Beam)

Providing and laying controlled C.C.M.200 & curing complete including the cost of form

17 work but excluding the cost of reinforcement for reinforced concrete work in Beam 21.00 6354.92 cum

upto floor two level for G.F.

Providing and laying controlled C.C.M.200 & curing complete including the cost of form

18 work but excluding the cost of reinforcement for reinforced concrete work in Beam 14.00 6396.33 cum

upto floor two level for F.F.

Providing and laying controlled C.C.M.200 & curing complete including the cost of form

19 work but excluding the cost of reinforcement for reinforced concrete work in Slabs 34.00 6567.02 cum

,landing, cantilevers for slabfor GF

Providing and laying controlled C.C.M.200 & curing complete including the cost of form

20 work but excluding the cost of reinforcement for reinforced concrete work in Slabs 11.00 6609.44 cum

,landing, cantilevers for slabfor FF

Providing and laying controlled cement concrete M.200 and curing complete excluding

21 the cost of formwork and reinforcement for reinforced concrete work in (E) Staircases 2.90 7545.71 cum

excluding landing upto floor two level for G.F. to F.F.

Providing and laying controlled cement concrete M.200 and curing complete excluding

22 the cost of formwork and reinforcement for reinforced concrete work in Lintel for G.F. 1.20 7800.23 cum

Providing and laying Controlled cement concrete M -200 for R.C.C.Lintels, including the

23 finishing smooth with curing etc complete including the cost of form work but 0.70 7841.64 cum

excluding the cost of reinforcement For F.F.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and laying controlled cement concrete M-200 curing complete including the

24 cost of form work but excluding the cost of reinforcement for reinforced concrete work 1.40 6658.93 cum

in CHHAJJAS G.F.

Providing and laying controlled cement concrete M-200 curing complete including the

25 cost of form work but excluding the cost of reinforcement for reinforced concrete work 0.70 6700.34 cum

in CHHAJJAS F.F.

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending,

26 binding and placing in position complete upto floor two level All floors 18828.00 77.28 Kg

White Stone Bela mesonry block in course in superstructure with stone of approved

27 quality in Lime Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. 44.00 6507.94 cum

White Stone Bela mesonry block in course in superstructure with stone of approved

28 quality in Lime Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. 37.00 6789.66 cum

complete. For F.F.

White Stone Bela mesonry block in course in superstructure with stone of approved

29 quality in Lime Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. 13.00 7071.38 cum

complete. For S.F.

White stone bella masonary work in partition walls up to 15cm thickness in Cement

Mortar 1:4(1-cement:4-course sand).-(partition masonary GF)

White stone bella masonary work in partition walls up to 15cm thickness in Cement

Mortar 1:4(1-cement:4-course sand).-(partition masonary FF)

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of

Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal

Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x

1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of

32 horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 26.00 1583.95 Sqmt

0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg /

Rmt), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal

Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm

x 1.30 mm (of Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section

no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete

for window.

Providing and fixing Standard extruded of alluminium section of size 63 x 38.1 x 1.2mm

(of Jindal Section No. 465, @ Wt. 0.643 Kg. per Rmt. with colour anodized alluminium

frame with 5mm thick transparent glass as details for ventilation

Providing and Fixing Entrance Door with floor spring and pivoted sgutter made from

T.W. 5cm x 15cm Styles and 6 Nos. 5cm x 5cm. T.W. rails covered with 6mm thick

water proof ply finished with both sides laminated. Colours and shade approved by

architect 60cm longs S.S. handle on both shutter. waterproof ply and 1 mm thk

35 lamination over it,on both the sides, colour,pattern and design of which is to be 8.00 4936.88 Sqmt

approved by the architect. doors shall be provided with floor springs and 60 cm. long

stainless steel handles, lock, aldrap, as/detail. including pirmer coat of approved

quality and two coat of oil paint on exposed teak wood etc. complete

Providing & fixing Door having colour anodised standard Aluminium sections of

JINDAL section 19552, 1.1 kg/rmt, size 38x63.50 mm frame with fill wood having

Double / single shutters of factory made and stamped IS 12823 grade-I Type-1 35 mm

thick solid core melamine faced three layred rsin flush door fixed with SS hinges,

handle, lock,aldrap, stopper having dacoratived1 mm thk. lamination on both side

including 4 mm thick glass on top havaing 30 cm long stainless steelpipe handle on

both side with all SS fixtures & fastenings as directed by Achitech etc complete

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing FRP Frame 125 x 65mm and 35mm thick FRP Shutter with Wood

grain raised pannel design finish shutter having extra reinforcement on sides and edges

and in Gel Coat Finish. The core of the shutter is to be filled up with injected fire

retardant grade polyurethane foam done in situ along with embedded wooden pieces

37 for stiffening and also for taking hines and fixtures. The whole FRP Frame and shutter is 10.00 2019.97 Sqmt

to be water proof, weather proof, termite proof and resistance to mild acid/Alkali.

Rates are to be inclusive of S.S. hinges with necessary screws and alluminium fixtures

and fastening.

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc.

38 with M.S. flats at required spacings and frame alround, square or round bars with 1392.00 112.67 Kg

round headed bolts and nuts or by screws. (A) Plain Grill.

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto surface using white cement

including rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid with C.C 1:2:4 flooring with 40 mm etc. as

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and

40 as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for 113.00 706.92 sqm

levelling and filling the joint with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete

Providing and Fixing Machine cut, free edges, machine polished Granite Telephonice

Black stone sandwich type slab 18 mm thick for Doors/Windows Cill and Jambs

cladding as per design including full molded round front edge and 1 cm nosing and laid

on 10 mm thick cement mortar 1:3 ( 1 cement:3 coarse sand) jointed with grey cement

slurry including rubbing and polishing finishing etc complete.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing sandwich type granite 18 mm thick cooking platefom of 60 cm width and

cm height including 25 mm thick polish kota stone at bottom of granite and bottom

flooring using 20 mm thick C.M.1:6 including vertical and bottom polish kota stone for

42 kitchen sink,granite panipatti and vertical support for granite,all labour and material 5.00 5663.07 Sqmt

half round moulding etc.complete as per design excluding cost of kitchen sink and

vertical, horizontel support and shelves for storage.

Providing 10mm thick Mala cement plaster in single coat on brick concrete walls for

interior plastering upto floor two level and finished even and smooth in (i) Cement

Mortar 1:4 (1-Cement:4 sand) incl. finishing Putty with a floating coat of neat cement

slurry etc. G.F.

Providing 10mm thick Mala cement plaster in single coat on brick concrete walls for

interior plastering upto floor two level and finished even and smooth in (i) Cement

Mortar 1:4 (1-Cement:4 sand) incl. finishing Putty with a floating coat of neat cement

slurry etc. F.F.

Providing 15mm thick Mala cement plaster in single coat on smooth finished

(Similar)side of single or half masonary walls for interior plastering upto floor two level

45 and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) incl. 476.00 222.66 Sqmt

finishing Putty with a floating coat of neat cement slurry etc. G.F.

Providing 15mm thick Mala cement plaster in single coat on smooth finished

(Similar)side of single or half masonary walls for interior plastering upto floor two level

46 and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) incl. 373.00 246.56 Sqmt

finishing Putty with a floating coat of neat cement slurry etc. F.F.

20 mm thick sand faced cement plaster on walls upto height 10 metres above ground

level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement :3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-Cement: 1-sand) etc. complete.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and jointed /grove with

color cement slurry including finised with flush pointing & cleaning the surface etc.

complete for light & Dark shade / mat finished

Providing and laying 8mm thick 24” x 24” size vitrified tiles in skirting, risers of steps

49 and dado on 10mm thick cement plaster 1:3 (1-Cement::3-coarse sand) and jointed 23.00 1195.02 Sqmt

with white or color cement slurry as directed

Providing and laying white glazed/ Degital Wall tiles 450x300 mm tiles 6 to 8 mm thick

in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand) finishing with flush pointing in white cement.

Providing and laying machine cut free edges, machine polished Granite ( single piece

not more than 1.50 mt) of even grade 18 mm (Average) thick for steps and riser as per

design incl. rounded front edge & 1 cm nosing in trade of steps laid on 20 mm thick

cement mortar 1:6 (1 -cement : 6 coarse sand ) on treads & 10 mm thick Cement

mortar 1:3 for risers, jointed with grey cement slurry including rubbing

Providing and laying coloured glazed tiles/Degital wall tiles of the size 300mm x

300mm x 8mm / 300mm x 405mm x 8mm in skirting, risers of steps and dedo on 1mm

thick cement plaster 1:3 (1-Cement : 3-Coarse sand) & jointed with white cement

Providing and laying polished Kota stone slab flooring/skirting over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and

jointed with grey cement slurry including rubbing and polishing etc. complete.(A)

25mm thick

Providing and fixing stainless steel railing (modular type) having hand rail 850mm

height and of 50mm dia and baluster 32mm dia at 90cm C/C and 4 horizontal pipeof

54 19mm dia. At required spacing as per design and SS having 304 grade and 18 gauge 9.00 3584.49 Rmt

pipe including fastening, hold fast, clumps coach bolts etc. comp.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Finishing Wall with Weather Proof Exterior Emulsion Paint on Wall Surface (Two Coats)

to give an required shape even shade after thoroguhly brushing the surface to remove

all dirt, and remains of loose powdered materials etc. complete

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on New Wall Surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign matter and sand papered

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or

equivalent & two coats of primer of approved brand and manufacture on new wall

57 surface to give an even shade including thoroughly brushing the surface free from 1106.00 40.59 Sqmt

mortar dropping and other foreign matter and sand papered smooth.

Providing erecting fixing double coated Syntex of Equivalent PVC (ISI) Mark Water Tank

58 of Required Capaicty each with all necessary fittings & connection etc.complete on 2000.00 3.94 Ltrs

Providing and fixing wash down water closet (European type, W.C. Pan) with integral P

or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-

fine sand) (incl Seat and cover and jet spray (A) vitreous China Pattern : (i) in white

colour with plastic seat cover.

Providing and fixing W.C. Orrissa pan (Indian type W.C. Pan) size 580mm including 'P'

60 trap or ‘S’ trap, connection,G.I Inlet and bed concreting Inc 25mm CP Brass half turn 1.00 1579.96 Nos

flush cocker complete

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making good the same but excluding fittings.

61 (A) Vitreous China: (ii) Flat Back washbasin 55 mm x v 4mm size. (i) In white colour. 5.00 2140.19 Nos

incl,C.P.brass waste 32mm dia. PVC connection & high pressure 15mm dia. pillar tap

Providing and fixing C.P. brass shower rose with 15mm or 2mm inlet. (A) 100 mm dia.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to

wooden plugs with C.P. brass scews. (B) 6mm x 2mm size.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain with jali of the following

nominal diameter of self cleansing design with C.I. Scrwed down or hinged grating

including the cost of cutting and making good the walls. (A) 100 mm diameter

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water

65 tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight. (B) 5.00 1246.91 Nos

150mm x 100mm size Pof R type

Constructing masonry for under ground C.I, Inspection chamberand bends with brick

having crushing strength not less than 35Kg./Sqm in C.M. 1:5 C.I. cover with frame

(light duty) 455mm x 610mm internal dimensions total weight of cover not less than

35Kg(Weight of cover 23 Kg. and weight of frame 12Kg) with R.C.C. top slab with 1:2:4

mix foundation concrete 1;5:10 inside plaster 15mm thick with C.M. 1:3 finished

smooth with floating coat of neat cement slurry on walls and bed concrete etc. comp.

(A) Inside dimensions 455 x 610 and 450mm deep

Providing and fixing chromium plated brass half trun flush cock of approved quality

including fixing in pipe line etc. complete. (ii) 25mm dia.

68 Providing and fixing brass screw down stop tap. (A) 15mm dia. 6.00 205.82 Nos

Providing and fixing Half Turn bibcock of following size. Bibcock.(i) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve. (E) 40 mm

Providing and fixing Gun metal check or non-return fullway wheel valve. (E) 15 mm

Providing and fixing Gun metal check or non-return fullway wheel valve. (E) 25 mm

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials

Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-4) line including

fitting as approved by Engineer-in-Charge. Pipe shall be fixed on the wall with the help

of clamp at every two meter C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials. (D) 40 mm dia.

Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-4) line including

fitting as approved by Engineer-in-Charge. Pipe shall be fixed on the wall with the help

of clamp at every two meter C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials. (B) 25mm dia.

Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-4) line including

fitting as approved by Engineer-in-Charge. Pipe shall be fixed on the wall with the help

of clamp at every two meter C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials. (a) 15mm dia.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm

heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats

with dry masonry work at top for 45cm. height including covering the top with stone

including providing vatas in C.M. 1:3 with finishing, curing etc. complete as directed.

Providing cement vata (1cm. x 1 cm. size) quarter round in cement mortar 1:1 including

neat cement finishing, watering etc. complete.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted

80 on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass 4.00 859.40 No

screws and washers.

Providing and filling with good quality cinder(steam coal) as directed by engineer in

81 charge in sunks in layers of 15cm thick including watering, placing, ramming well etc as 4.00 799.92 Cum

directed for all floor.

Providing and fixing pre-cast (Rubber Mold)concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per

82 approved design and including excavation for fixing in proper line and level,filling the 65.00 402.54 Rmt

joint with C:M 1:3 (1cement:3fine sand) etc complete.

Total =

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

I / Weam / are willing to carryout the work at………………………. % above/ below percent (Should Be written in figures and words)

of the estimated rate mentioned above Amount of my / our tender works out as under

(*Please strike out whichever is not applicable).

*Estimatedamount put to tender *Estimatedamount put to tender

Deduct…….……% below Add……..…% Above

Net……………………….. Net……………………………

In words………………….. In words………………………..

Note 1:- The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In – Charge for which no extra

payment shall bemade

Note 2:- The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4:- In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement Consumption/16/C

Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Bidder Deputy Executive Engineer Executive Engineer

Dist. R & B. Sub Division R&B Division

Junagadh Junagadh