SPL REPAIR FOR CONVERSION OF LT OH LINE TO UNDERGROUND CABLE WITH UPGRADED SIZE FOR IMPROVEMENT OF LT DISTRIBUTION SYSTEM AT JSI ENCLAVE UNDER GE A UTILITY JODHPUR

Amount

Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm 3.5 core all as specified and directed by Engineer-in-Charge.

Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sq mm 3.5 core all as specified and directed by Engineer-in-Charge.

Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core all as specified and directed by Engineer-in-Charge.

Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core all as specified and directed by Engineer-in-Charge.

Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core all as specified and directed by Engineer-in-Charge.

Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core all as specified and directed by Engineer-in-Charge.

Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanized steel earth plate electrodes 600mmx600mmx6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron earthing strip 32mm x6mm thick by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2020 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of strata incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site. Note : Rate included for excavation & earth work in any type of strata as shown in electric plate no-3 in SSR Part-I.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, erection of poles, struts/stays, leveling of yard etc not exceeding 10 M² on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil.

M&L for sand cushioning to U/G cable and punning for cushioning of cable 8cm below the cable and 15cm above cable all as specified and directed by Engr-in-charge.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250 mm x 150 mm x 40 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables for protection.

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soil.

Removing of excavated soil not exc. 50 M from starting points all as directed by EIC.

Supply and fix cable path indicators made out of thick roughly hammer dressed stone slab size (30cm x 75cm x 7.5cm ) with applying two coats of paint, marking of voltage and size of cable, route including necessary earth work required complete all as specified and directed by Engr-in-charge.

Motorized Auguring/drilling in road of suitable dia at a depth of 60 cm for laying of 40/50/80 mm dia GI tubing pipe.

M&L for 100 mm dia GI tubing medium grade incl. accessories for protection of cables on poles / under road crossing of following sizes.

All as per Item No 16.00 but for 80 mm dia

All as per Item No 16.00 but for 50 mm dia

All as per Item No 16.00 but for 40 mm dia

Dismantling of unserviceable ACSR conductor of any type and size from existing poles at various location complete all as directed.

Dismantling of cross arms (Clamp, nut bolts ),care fully from site complete all as specified and directed by Engr-in-charge.

Dismantling of insulators any type any size from existing poles complete all as directed.

Taking out serviceable LT cable of any type and size for re-use and relaying in ground/along wall at site complete all as directed . Note : Earth work, sand & PCC covers/stone slab shall be measured and paid separately.

Supply and fix security light junction boxes of dimension 240×130×110, with shockproof, rustproof, termite resistant, weather proof, cable entry from bottom , pole mounting arrangement along with 3 phase 4 wire almunium busbar with insulators and including MCB SP-0.5 amps rating with provision of MCB, Cable Glands, lugs incl three core copper cable with pvc conduit from junction box to existing LED fitting. and including flexible hose pipe from box to conduit. Make :Sintex/Hensel/Neptune. (Note: MCB will be measured and paid separately under respective Sch 'A' item.

S&F of MCB SP 0.5 Amp, 10 KA 240 Volt complete fixed complete all as directed and specified.

S&F copper cable 1100 volts grade PVC insulated and PVC sheathed wheather proof multistranded of size 3 Core x 1.5 sqmm complete all as specified and directed.

M&L for rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows. Reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, MS clamps (min 3 nos) for fixing with pole etc of size 20 mm dia complete all as directed.

M&L for end outdoor/indoor jointing kit suitable for XLPE/ PVC Cable 1100 volts grade, heat shrinkable type for indoor/ outdoor applications complete including preparing ends of cable all as directed and specified as under :- (a) 4 to 16 sqmm 3.5 /4 core

M&L for end outdoor/indoor jointing kit suitable for 25 to 50 sqmm 3.5 core XLPE/ PVC Cable 1100 volts grade, heat shrinkable type for indoor/ outdoor applications complete including preparing ends of cable complete all as directed and specified.

M&L for end outdoor/indoor jointing kit suitable for 70 to 150 sqmm 3.5 core XLPE/ PVC Cable 1100 volts grade, heat shrinkable type for indoor/ outdoor applications complete including preparing ends of cable complete all as specified and directed.

M&L for end outdoor/indoor jointing kit suitable for 185 to 300 sqmm 3.5 core XLPE/ PVC Cable 1100 volts grade, heat shrinkable type for indoor/ outdoor applications complete including preparing ends of cable complete all as specified and directed.

S&F cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3.5 / 4 core XLPE, armoured, Al conductor cable of size 10 to 16 sqmm complete all as specified and directed.

S&F cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3.5 / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm complete as specified and as directed.

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 400 amps duly insulated by insulation of RYB colour 200 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and including danger plate duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed and comprising of the following:- (A) IN COMING:- (a) MCCB 4 Pole 415 Volts 25 KA 250 Amp rating microprocessor adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No. (B) OUT GOING :- (a) MCB TPN 415 Volts 63 Amp rating -03 Nos (b) MCCB 4 Pole 415 Volts 25 KA 100 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -02 No (c) MCCB 4 Pole 415 Volts 25 KA 200 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -01 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 300 amps duly insulated by insulation of RYB colour 200 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and including danger plate duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed and comprising of the following:- (A) IN COMING:- (a) MCCB 4 Pole 415 Volts 25 KA 200 Amp rating microprocessor adjustable release type including spreaders, nut, bolts, lugs etc(Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No (B) OUT GOING :- (a) MCB TPN 415 Volts 63 Amp rating -02 Nos (b) MCCB 4 Pole 415 Volts 25 KA 100 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc(Icu=Ics=100%) -02 No (c) MCCB 4 Pole 415 Volts 25 KA 160 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -01 No (d) Digital Timer box with 4 pole contactor, 40A and connected accesories - 01 Set

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 300 amps duly insulated by insulation of RYB colour 200 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and including danger plate duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed and comprising of the following:- (A) IN COMING:- (a) MCCB 4 Pole 415 Volts 25 KA 160 Amp rating microprocessor adjustable release type including spreaders, nut, bolts, lugs etc(Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No (B) OUT GOING :- (a) MCB TPN 415 Volts 63 Amp rating -02 Nos (b) MCCB 4 Pole 415 Volts 25 KA 100 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -02 No (c) MCCB 4 Pole 415 Volts 25 KA 63 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -02 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 200 amps duly insulated by insulation of RYB colour 100 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and including danger plate duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed and comprising of the following:- (A) IN COMING:- (a) MCCB 4 Pole 415 Volts 25 KA 100 Amp rating microprocessor adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No (B) OUT GOING :- (a) MCB TPN 415 Volts 63 Amp rating -02 Nos (b) MCCB 4 Pole 415 Volts 25 KA 63 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -02 Nos

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 200 amps duly insulated by insulation of RYB colour 100 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and including danger plate duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed and comprising of the following:- (A) IN COMING:- (a) MCCB 4 Pole 415 Volts 16 KA 100 Amp rating microprocessor adjustable release type including spreaders, nut, bolts, lugs etc(Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No (B) OUT GOING :- (a) MCB TPN 415 Volts 63 Amp rating -02 Nos (b) MCCB 4 Pole 415 Volts 16 KA 63 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -02 No

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 300 amps duly insulated by insulation of RYB colour 100 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and including danger plate duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed and comprising of the following:- (A) IN COMING:- (a) MCCB 4 Pole 415 Volts 25 KA 160 Amp rating microprocessor adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No (B) OUT GOING :- (a) MCB TPN 415 Volts 63 Amp rating -02 Nos (b) MCCB 4 Pole 415 Volts 25 KA 100 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -01 No (c) MCCB 4 Pole 415 Volts 25 KA 63 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc(Icu=Ics=100%) -02 Nos

Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 100 amps duly insulated by insulation of RYB colour 100 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm duly embedded in PCC platform and including danger plate duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 butt hinges to panel doors and locking arrangement as desired complete all as directed and comprising of the following:- (A) IN COMING:- (a) MCCB 4 Pole 415 Volts 16 KA 63 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy meter of accuracy CL-1.0 rating - 01 No (B) OUT GOING :- (a) MCB TPN 415 Volts 32 Amp rating -02 Nos (b) MCCB 4 Pole 415 Volts 16 KA 40 Amp rating thermal magnetic adjustable release type including spreaders, nut, bolts, lugs etc (Icu=Ics=100%) -02 No

SANJOLI CONSTRUCTION COMPANY

M/S SUMAN ENTERPRISES

Inkhead Corporation

RISING ELECTRICALS

Anil Builders