Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.6 Cr
EMD Value
₹1.6 L
Closing Date
20 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Panchayat (R&B) Division, Mahisagar
Construction to Timba Gaame Paka Rasta thi Singli Chokdi thai Kothamba Jata Paka Rasta ne Jodto Road of Lunawada Taluka under MMGSY 2022-23 (Normal) Langth 2.50 Km Dist: Mahisagar
363742
14 of 2026-27
Open
Civil Works - Roads
Works
Mahisagar
8 documents required · 8 mandatory
₹3,600
Executive Engineer, Panchayat (R&B) Division, Mahisagar
₹1.6 L
6 Nov 2026
6 Nov 2026
6 Nov 2026
20 Nov 2026
6 Nov 2026
120 days
Name of work:- Construction to Timba Gaame Paka Rasta thi Singli Chokdi thai Kothamba
Jata Paka Rasta ne Jodto Road of Lunawada Taluka under MMGSY 2022-23 (Normal) Langth
2.50 Km Dist: Mahisagar
BILL OF QUANTITIES
estimated Estimated Rates Total Amount
estimated Estimated Rates Total Amount
but may be Item of work Unit According to
more or In Figure Estimated Quantities
Clearing and grubbing road land including uprooting
rank vegetation grass bushes,shrubs,sapling and
[1] 1.08 trees girth up to 300 mm removal of stumps of trees 84255.99 Hectare
cut earlier and disposal of unserviceable
materials(A) By manual means in area of light jungle
Construction of Compacted Granular Sub Base (
Grade -1 ,Crushed B T Material of 53 mm to 26.500 @
35 %. 26.50 mm to 4.75 mm @ 45 % and Below
mm @ 20%) by Providing Close Graded Material .
[2] 1913.70 Mixing in Mechanical Mix Plant at OMC Carrige of 1035.63 SqMt
Material to work site Spreading Uniform Layers with
Mortar Grader On Prepared Surface and compacting
with Vibratory Power Roller to achive desire density
Complete as per Clause
Providing and laying compacted WBM of Grading-II
MCBT metal of size 45 to 63mm in required layers
including using 16% stone screening, 13.2mm size
and 8% stone dust as filler including spreading
watering & consolidation by vibratory roller etc.
Providing and laying Compacted of Specified Hard
Murrum in side shoulder / Raise Up inclu.carraige of
material and spreading on prepared base including
compacting as per MOST Specification etc... complete.
Earthwork in cutting including preparing the slope
and camber andstacking or utilising the cutting stuff
in bank as directed upto 200 Meters from the end of
cutting with all lead and lift.
Rolling of earthwork in layers with power roller
[6] 766.00 including filling in depressions which occur during 22.87 cu.m
Earthwork for embankment including breaking
clods, dressing with all lead and lift and including
watering rolling and consolidation of subgrade in
[7] 4839.80 layers at O.M.C. to required dry density including 177.91 Cum
filling the depression which occur during the process
using power roller 8T to 10T.(E) From Borrow area
within 3.0KM. lead
Excavation for foundation upto 1.5 m depth including
sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter
lead.(B) Dense or Hard soil
estimated Estimated Rates Total Amount
estimated Estimated Rates Total Amount
but may be Item of work Unit According to
more or In Figure Estimated Quantities
Providing and filling in foundation with ordinary
Cement concrete M-100 mix and providing necessary
vertical pin headers including formwork, vibrating,
ramming and curing complete.(More than 10 ton)
estimated Estimated Rates Total Amount
estimated Estimated Rates Total Amount
but may be Item of work Unit According to
more or In Figure Estimated Quantities
Providing and casting in situ ordinary cement
concrete M-150 mix and providing necessary pin
headers including shuttering, scaffolding, laying,
vibrating, curing and finishing complete without V-
Groves.(A) Height from 0.0 M. to 5.0 M.(More Than
Supplying and fixing reinforced concrete heavy duty
non-pressure pipes with collars for culverts
including setting and joining the pipes in C.M. 1:2
watering laying (To level of slops of I.S. 458 /
Class NP4 of following internal diameter. (iv)
Providing TMT Bar FE 500D reinforcement for R.C.C.
[12] 342.00 work including bending, binding and placing in 77.29 Kg
position complete upto floor two level
White washing with lime on wall surface (two coats)
to give an even shade including thoroughly booming
the surface to remove all dirt, dust; mortar drops and
other foreign matter.
Proivding temporay all weather and Fair weather
diversion suitable for traffer is during the
[14] 2.00 construction period of the Bridge including providing 2020.00 Lump
necessary drains and all safety measures including
red / signals at night for traffic etc. complete.
Supplying and fixing reinforced concrete heavy duty
non-pressure pipes with collars for culverts
including setting and joining the pipes in C.M. 1:2
[15] 80.00 watering andlaying (To level of slops of I.S. 458 / 1053.39 Rmt
1971 Class NP4 casted by vertically vibrated
technology of following internal diameter. 300mm
Filling around the pipes with murrum including
dressing, tampering etc. complete.
Providing and Laying Bituminious Prime Coat SS1
Emulsion @ 7.50 Kg / 10 Sqmt of Slow Curing
Emulsion as per MoRTH Specifications including cost
of Materials, Labour, Labour equipment etc Complete.
Providing and laying bituminius spray grout base
course in 37.50 mm thick with bitumen of grade ( VG-
30 ) at the rate of 1.99 % by weight of mix for mixing
& 4.00 Kg/10 Sqm for tack coat of Emulsion RS1 and
using B.T chips of required gradation including
[18] 798.00 cleaning and heating asphalt premix materials by hot 3147.04 MT
mix process in proper gradation and laying with
paver finisher and consolidation by power roller of
to 10 tonne including cost of all materials . Asphalt
aggregates, labour charges royalty charges etc
complete as directed.
estimated Estimated Rates Total Amount
estimated Estimated Rates Total Amount
but may be Item of work Unit According to
more or In Figure Estimated Quantities
Providing laying &rolling 25m m thick open graded
premixed bitumineous carpet with B.T. aggregate as
specified and using bitumen grade 60/70 (VG-30)
for tack coat of Emulsion RS1 at the rate of
kg./10 Sq.M. and using bitumen for mixing with
agreegate at the rate of 3.36 % i.e 33.60 kg/M.T. of
[19] 559.00 total mix including heating &mixing in drum mix 4189.78 MT
plant &spreading the same with paver finisher and
consolidation with power roller inclu.necessary fire
wood, oil, lubricants, labour charges etcusing
contractor's own drum mix plant and equipment,
tool etc. compl. in accordance with the require-ment
of specification.
Providing and laying sealcoat with B.T. agreegate as
specified using agreegate at the rate of 0.18 Cu.mt /
10 Sq.M. and bitumen Grade VG 30 for mixing with
agreegate at the rate of 4.50 % i.e 45 Kg/M.T. of total
weight of mixed Hot mix laying process is including
heating the asphalt aggregate continous batching,
transporting the mix and spreading the same by
paver roller including necessary firewood, oil,
lubricants, labour charges higher charges of
machinery etc.complete.
Providing and fixing ordinary kilometer stone of
approved hard stone as per I.R.C type desing in C.C.1
4 8 including painting lettering etc, complete (For
Providing and fixing hectometer as per I.R.C type
[22] 14.00 design including painting, lettering etc. complete. (I) 116.08 Nos
Fixing in earth
Providing and fixing guard stone as per I.R.C type
[23] 84.00 design including white washing etc. complete. (I) 104.22 Nos
Fixing in earth
Providing and fixing Junction board of M.S. plates and
angles as per standard I.R.C. design including fixing
[24] 2.00 in C.C. 1:4:8 with necessary excavation painting 5236.70 Nos
figuring and lettering on board etc. complete as per
detailed drawing
Supplying and fixing road sign board of M.S. plates
and angle iron including painting, lettering etc.
[25] 14.00 complete including fixing in C.C. 1:4:8 with necessary 3072.99 Nos
excavation etc. complete as per I.R.C. type design.(ii)
Reflective type
estimated Estimated Rates Total Amount
estimated Estimated Rates Total Amount
but may be Item of work Unit According to
more or In Figure Estimated Quantities
Road marking with hot applied thermoplastic paints
with reflectorising glass beads on bitumin surface
providing and laying a hot applied thermoplastic
compound 2.5 mm thick including reflectorising
glass beads @ 250gms per sqm area, thickness of
2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes. zebra patta
/bump patta lane/center line/ edge line/cut patta.
The white color marking should provide liminance
coefficinet on cemend road shalll be min
mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day
time. The marking should meet the performance
criteria for night time reflectivity, wet reflectivity and
skid resistance as mentioned in the section-15 of IRC
35-2015. Warranty for the Retro reflectivity should
Cat Eye / Road Stud / RPM: Supplying Raised
Pavement Markers made of polycarbonate and ABS
moulded body and reflective panels with Micro
prismatic lens (No Glass bead lens) capable of
providing total internal reflection of the light
entering the lens face and shall support a load of
13635 kgs. tested in accordance to ASTM D
Type H and complying to Specifications of Category A
of MORTH Circular No RW/NH/33023/10-97 Ð DO
[27] 632.00 III Dt 11.06. 1997. The height, width and length shall 217.40 Nos
not exceed 20 mm, 130 mm and 130 mm and with
minimum reflective area of 13 Sqcm on each side and
the slope to the base shall be 35 +/- 5 degree. The
body of the marker should having finger grip for easy
and accurate placement and application with epoxy /
bituminous Adhesive as recommended by the
manufacturer of the marker. The color of the marker
should be as per the IRC 35-2015 and as directed by
Engineer-in-charge.
estimated Estimated Rates Total Amount
estimated Estimated Rates Total Amount
but may be Item of work Unit According to
more or In Figure Estimated Quantities
Village name/ Bump Ahed sign :-Providing and fixing
sing boards made out of 2mm aluminium sheet; size
90 x60cms. rectangle as as per the design of IRC-67-
1977 pre treated with phospheting process & acid
etchingcoated with one coat of epoxy primer and two
coats of best quality epoxy paint; reflectorised with
retrorefiective sheeting as per latest M.O.S.T.
Specifications;Letters and numerals should be as per
IRC-30-1968,3.1m long (2 nos) stand post and frame
fabricated from suitable size iron angle of 50 x 50 x
5mm painted with best quality epoxy coatings in
black and white bends. the details of symbol or
inscription / numerals for each board shall be as per
the instruction of engineer in charge. The fixing at
site shall be in 1:2:4 CC block of size 45 x 45 x 60cms.
for each leg. including excavation curing etc complete
under the supervision of engineer in charge.(A)
Engineer Grade(VR)...
Cautionary Warning Sign :-Providing and fixing sing
boards made out of 2mm aluminium sheet; size 90 x
90 x90 cms. equilateral triangle as per design of IRC-
67-1977.Pre treated with phospheting process & acid
etching;coated with one coat of epoxy primer and
two coats of best quality epoxy paint ;reflectorised
with retrorefiectivesheeting as per latest
M.O.S.T.Specifications;3.1m long stand postand frame
[29] 14.00 fabricated from suitablesizeiron angle of 35 x 35 x 3808.66 Nos
3mm, 75 x 75 x 6mm as required; painted with
bestquality epoxy coatings in black andwhite bends.
The details of symbol foreach board shall be as per
theinstruction of engineer in charge. The fixing at site
shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for
each leg.including excavation curing etc.complete
under the supervision of engineer in charge.(A)
Engineer Grade(VR)
estimated Estimated Rates Total Amount
estimated Estimated Rates Total Amount
but may be Item of work Unit According to
more or In Figure Estimated Quantities
Regulatory/Mandatory signs :Providing and fixing
sing boards made out of 2mm aluminium sheet; size
60cms.diameter circle as per the design of IRC-67-
1977 pretreated with phospheting process & acid
eteching;coated with one coat of epoxy primer and
two coats of best quality epoxy paint; reflectorised
with retrorefiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame
[30] 11.00 fabricated from suitablesize iron angle of 35 x 35 x 3439.81 Nos
3mm 75x75x6mm as required; painted with best
quality epoxy coatings in black and white bends. the
details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site
shall be in 1:2:4 CC block of size 45 x 45 x60cms. for
each leg. including excavation curing etc. complete
under the supervision of engineer in charge.(A)
Engineer Grade(VR)...
STOP SIGN:-Providing and fixing sing boards made
out of 2mm aluminium sheet; size 90 x
90cms.rectangle as per the design of IRC-67-1977
pre treated with phospheting process & acid teching;
coated with one coat of epoxy primer and two coats
of best quality epoxy paint; reflectorised with retro
refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame
[31] 6.00 fabricated from suitable size iron angle of 35 x 35 x 4676.06 Nos
3mm 75x75x6mm as required; painted with best
quality epoxy coatings in black and white bends. the
details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site
shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for
each leg. including excavation curing tec. complete
under the supervision of engineer in charge.(A)
Engineer Grade(VR)...
Hazard Marker Sign :-Providing and fixing sing
boards made out of 2mm aluminium sheet; size 90 x
30cms. rectangle as as per the design/drawing
attached (IRC) pretreated with phospheting process
& acid etching; coated with one coat of epoxy primer
and two coats of best quality epoxy paint;
reflectorised with retrorefiective sheeting as per
[32] 4.00 latest M.O.S.T. Specifications; 3.1m long stand post 2423.74 Nos
and frame fabricated from suitable size iron angle of
35 x 35 x 3mm & 50 x 50 x 5mm painted with best
quality epoxy coatings The fixing at site shall be in
1:2:4 CC block of size 45x45x 60cms. for each leg.
including excavation curing etc. complete under the
supervision of engineer in charge.(A) Engineer
estimated Estimated Rates Total Amount
estimated Estimated Rates Total Amount
but may be Item of work Unit According to
more or In Figure Estimated Quantities
"LOGO" Board : Supplying & Fixing logo board of
MMGSY Diamond size (600 mm x 600 mm) 16 gauge
& board plate size (900 mm x 250 mm) 16 gauge
thick M.S Plate and 2.40 Mt Deep length single angle
75 x 75 x 6 mm size including fitting and painting
lettering with luminous color as per drawing.
Citizen' s information Board- Providing and fixing of
typical MMGSY information board as per instruction.
Two MS plates of 1.6 mm thick, of 900 mm x 750mm
size fixed at top & bottom duly welded with MS
angles of 25 x 25 x 5 mm thick M.S plate shall be
welded by two vertical M.S flats & four horizontal M.S
flates 5 mm thick to 75 mm x 75 mm of 12 SWG
square tubes posts duly embedded in cement
concrete M-15 grade blocks of 600mm x 600mm x
75mm, below ground level. Painting New letters &
figure of any shade with ready mixed synthetic
enample paint of superior quality in required shade
and colour, All sections of framed posts and steel
tube will be painted with primer and two coats of
epoxy paints as per drawing Clause 1701 and
Annexure 1700.1 (10.16)
Type - A, "W" : Metal Beam Crash Barrier (Providing
and erecting a "W" metal beam crash barrier
comprising of 3 mm thick corrugated sheet metal
beam rail, 70 cm above road/ground level, fixed on
ISMC series channel vertical post, 150 x 75 x 5 mm
spaced 2 m centre to centre, 1.8 m high, 1.1 m below
ground/road level, all steel parts and fitments to be
galvanised by hot dip process, all fittings to conform
to IS:1367 and IS:1364, metal beam rail to be fixed
on the vertical post with a spacer of channel section
150 x 75 x 5 mm, 330 mm long complete as per
One Crore Fifty Seven Lacs Seventy One Thousand OneHundered and Sixteen Paisa
I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words)
of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated Amount put to tender Estimated Amount put to tender
In Words In Words
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge
for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills
estimated Estimated Rates Total Amount
estimated Estimated Rates Total Amount
but may be Item of work Unit According to
more or In Figure Estimated Quantities
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix
design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input
rate mentioned in all the tender.
5. Credit of materials of Diversion & CD Work amount of Rs. …........................ must be recovered from Contractor's ............ R.A
Dated Signature Deputy Executive Engineer Divisional Accounts officer Executive Engineer
the Contractor. R & B (P) Sub Division R & B (P) Division R & B (P) Division
Lunawada Mahisagar Mahisagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1.SBD Timba Gam Road.pdf
2.Schedule B (BOQ).pdf
8.Specification Index.pdf
9.Testing Schedule.pdf
15.Drawing File.pdf
16.Specification Road Timba.pdf
123.1_GR 01 GRs - SBD with Index.pdf
123.2_GR 01 GRs - SBD with Index.pdf
123.3_GR 01 GRs - SBD with Index.pdf
123.4_GR 01 GRs - SBD with Index.pdf
GR 02 MMGSY ENVIRONMENT GR.PDF
GR 03 New added 25-26_compressed.pdf
Performance Bond and Bitumen date.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .